Physics Commons^™

Optical Tweezers: Exerting Force With Light, Gabriella Seifert

Scripps Senior Theses

Photons carry momentum. When a tightly-focused beam of photons hit a particle, they transfer some of their momentum to the particle, exerting a force. Optical tweezers take advantage of this phenomenon to trap (or “tweeze”) a spherical bead just after the focus of a diverging laser beam, creating a potential well that pulls in beads. In this thesis, I predict the force exerted on trapped beads and measure the actual force using an optical tweezers setup that I built. To predict the force, I follow the path of all possible rays from a diverging beam incident on a spherical bead …

Atomic Gradiometry Based On The Interference Of Microwave Optical Sidebands, Kaleb L. Campbell

Optical Science and Engineering ETDs

We describe a novel pulsed magnetic gradiometer based on the optical interference of sidebands generated using two spatially separated alkali vapor cells. The sidebands are produced with high efficiency using parametric frequency conversion of a probe beam interacting with Rubiduim 87 atoms in a coherent superposition of magnetically sensitive hyperfine ground states. First, experimental evidence of the sideband process is described for both steady-state and pulsed operation. Then, a theoretical framework is developed that accurately models sideband generation based on density matrix formalism. The gradiometer is then constructed using two spatially separated vapor cells, and a beat-note is generated. The …

Noncontact Liquid Crystalline Broadband Optoacoustic Sensors, Hengky Chandrahalim, Michael T. Dela Cruz

AFIT Patents

An optoacoustic sensor includes a liquid crystal (LC) cell formed between top and bottom plates of transparent material. A transverse grating formed across the LC cell that forms an optical transmission bandgap. A CL is aligned to form a spring-like, tunable Bragg grating that is naturally responsive to external agitations providing a spectral transition regime, or edge, in the optical transmission bandgap of the transverse grating that respond to broadband acoustic waves. The optoacoustic sensor includes a narrowband light source that is oriented to transmit light through the top plate, the LC cell, and the bottom plate. The optoacoustic sensor …

Developing A Data Acquisition System For Use In Cold Neutral Atom Traps, Jonathan E. Fuzaro Alencar

Physics

The rising interest in quantum computing has led to new quantum systems being developed and researched. Among these are trapped neutral atoms which have several desirable features and may be configured and operated on using lasers in an optical lattice. This work describes the development of a new data acquisition system for use in tuning lasers near the precise hyperfine transition frequencies of Rb 87 atoms, a crucial step in the functionality of a neutral atom trap. This improves on previous implementations that were deprecated and limited in laser frequency sweep range. Integration into the experiment was accomplished using an …

Femtosecond Pulse Compression Via Self-Phase Modulation In 1-Decanol, Jacob A. Stephen

Electronic Theses and Dissertations

Ultrafast science is a branch of photonics with far reaching applications in and outside the realm of physics. Ultrashort laser pulses on the order of femtoseconds (1 fs = 1 × 10−15 s) are widely used for ultrafast science. Many lasers can produce pulses on the order of 100 fs, with state of the art, high end lasers being capable of producing pulses around 30 fs. However, many experiments require pulses around 10 fs or shorter. Femtosecond pulses are typically generated using spectral broadening via self-phase modulation, followed by dispersion compensation. The most common spectral broadening technique exploits the nonlinear …

Study Of The Effects Of Cavity Mode Spacing On Mode-Hopping In Iii–V/Si Hybrid Photonic Crystal Lasers, Praveen K.J. Singaravelu, Sharon M. Butler, Robert N. Sheehan, Alexandros A. Liles, Stephen P. Hegarty, Liam O'Faolain

Cappa Publications

We present a design methodology for hybrid lasers to realise mode-hop free operation by controlling the cavity mode spacing. In this study, a compact hybrid photonic crystal laser (H-PhCL) was employed which allowed a reduction of the Fabry–Perot length of the laser cavity and eliminated the need for an active mode stabilisation mechanism in order to realise mode-hop free operation. The H-PhCL was formed by butt-coupling a reflective semiconductor optical amplifier (RSOA) with a two-dimensional silicon (Si) photonic crystal (PhC) cavity. Continuous stable single frequency operation with >40 dB side-mode suppression ratio (SMSR) of the laser was achieved for gain …

Fabrication Of Metal-Silicon Nanostructures By Reactive Laser Ablation In Liquid, Eric J. Broadhead

Theses and Dissertations

Metal-silicon nanostructures are a growing area of research due to their applications in multiple fields such as biosensing and catalysis. In addition, silicon can provide strong support effects to metal nanoparticles while being more cost effective than traditionally used supports, like titania. Traditional wet-chemical methods are capable of synthesizing metal-silicon nanostructures with a variety of composition and nanoparticle shapes, but they often require high temperatures, toxic solvents, strong reducing agents, or need capping agents added to stabilize the nanoparticles. Laser processing is an emerging technique capable of synthesizing metal-silicon composite surfaces that offers a faster, simpler, and greener synthesis route …

Radiation-Balanced Fiber Lasers And Amplifiers, Esmaeil Mobini Souchelmaei Mr

Optical Science and Engineering ETDs

Over the past decades, high-power fiber lasers and amplifiers have been extensively under research to achieve higher output powers. However, temperature rise in the core of fiber lasers and amplifiers has been a big issue in power-scaling. Radiation-balancing is a viable technique introduced for effective heat mitigation in lasers and amplifiers by S. Bowman in 1995. Radiation-balancing relies on solid-state laser cooling as a self-cooling mechanism to mitigate the generated heat in lasers and amplifiers. To implement the mentioned idea in fiber lasers and amplifiers, a set of issues should be scrutinized; (i) the amenability of silica glass (as the …

An Overview Of Lasers And Their Applications, Luis Cristian Giovanni Guerrero

Physics

This paper is an overview of lasers and their applications. The fundamentals of laser operation are covered as well as the various applications of advanced laser systems. The primary focus is to highlight some of the technological advancements made possible by lasers in the last half-century.

Structuring Light For Investigating Optical Vortices, Andrew Voitiv, Mark Siemens

DU Undergraduate Research Journal Archive

Vortices are well known in our world: tornadoes, hurricanes, and quickly stirred iced tea all demonstrate the vortex phenomenon. In addition to these classical fluids, vortices exist in laser light. While classical fluid vortex dynamics is one of the oldest studied physics problems, the study of optical vortices is only a few decades old. Paralleling the community’s curiosity of quantized vortices in quantum fluids, such as super fluid helium and Bose-Einstein condensate, there is immense interest in the study of optical vortices. In this article, we cover the basic theory of structuring light to generate optical vortices and then discuss …

Characterizing Complexity In A Semiconductor With Optical Feedback From Two Mirrors, Layla M. Abrams

2020 Symposium Posters

Lasers are stable devices with a broad spectrum of applications. They can be perturbed to induce complex dynamics in their output intensity. One interesting regime in semiconductor lasers is that the output intensity of the laser emits a sequence of non-regular optical spikes. This behavior resembles that of neurons. We use a semiconductor laser with optical feedback from two mirrors to characterize the behavior of the laser's power output. The data is then analyzed by transforming the intensity time series into a sequence of patterns or words. By doing this we want to explore how the laser changes its preferred …

Polarization Properties Of Airy And Ince-Gaussian Laser Beams, Sean Michael Nomoto

Graduate Theses and Dissertations

The description of polarization states of laser light as linear, circular polarization within the paraxial scalar wave approximation is adequate for most applications. However, this description falls short when considering laser light as an electromagnetic wave satisfying Maxwell's equations. An electric field with a constant unit vector for direction of the field and a space dependent complex scalar amplitude in the paraxial wave approximation does not satisfy Maxwell equations which, in general, requires all three Cartesian components of electric and magnetic fields associated for a nonzero laser beam to be nonzero.

Physical observation of passing a linearly polarized laser through …

Lasers, Noah B. Caro

Physics

No abstract provided.

Spectroscopy Of Neon For The Advanced Undergraduate Laboratory, H. C. Busch, M. B. Cooper, C. I. Sukenik

Physics Faculty Publications

We describe a spectroscopy experiment, suitable for upper-division laboratory courses, that investigates saturated absorption spectroscopy and polarization spectroscopy in a neon discharge. Both experiments use nearly identical components, allowing students to explore both techniques in a single apparatus. Furthermore, because the wavelength of the laser is in the visible part of the spectrum (640 nm), the experiment is well-suited for students with limited experience in optical alignment. The labs nicely complement a course in atomic or plasma physics, provide students with the opportunity to gain important technical skills in the area of optics and lasers, and can provide an introduction …

Thermally Stable Hybrid Cavity Laser Based On Silicon Nitride Gratings, Simone Iadanza, Andrei P. Bakoz, Praveen K. J. Singaravelu, Danilo Panettieri, Stefan Schulz, Ganga Chinna Rao Devarapu, Sylvain Guerber, Charles Baudot, Frédéric Boeuf, Stephen Hegarty, Liam O'Faolain

Cappa Publications

In this paper, we show the experimental results of a thermally stable Si3N4 external cavity (SiN EC) laser with high power output and the lowest SiN EC laser threshold to our knowledge. The device consists of a 250 μm sized reflective semiconductor optical amplifier butt-coupled to a passive chip based on a series of Si3N4 Bragg gratings acting as narrow reflectors. A threshold of 12 mA has been achieved, with a typical side-mode suppression ratio of 45 dB and measured power output higher than 3 mW. Furthermore, we achieved a mode-hop free-lasing regime in the range of 15–62 mA and …

Double Optical Feedback And Pt-Symmetry Breaking Induced Nonlinear Dynamics In Semiconductor Lasers, Joseph S. Suelzer

Open Access Dissertations

A central aim of this research is to probe the nonlinear dynamics that arise in a semiconductor laser due to optical feedback. We investigate two schemes of optical feedback. The first scheme subjects the laser to optical feedback from two external cavities (or two loops), wherein each cavity contains a spectral filter. Using two filtered optical feedbacks, we experimentally demonstrate the ability to elicit and control unique dynamics in the optical emission frequency (wavelength) of the laser. These results are compared to a deterministic model describing the evolution of the complex electric field and carrier density of the laser. As …

Zncdmgse As A Materials Platform For Advanced Photonic Devices: Broadband Quantum Cascade Detectors And Green Semiconductor Disk Lasers, Joel De Jesus

Dissertations, Theses, and Capstone Projects

The ZnCdMgSe family of II-VI materials has unique and promising characteristics that may be useful in practical applications. For example they can be grown lattice matched to InP substrates with lattice matched bandgaps that span from 2.1 to 3.5 eV, they can be successfully doped n-type, have a large conduction band offset (CBO) with no intervalley scattering present when strained, they have lower average phonon energies, and the InP lattice constant lies in the middle of the ZnSe and CdSe binaries compounds giving room to experiment with tensile and compressive stress. However they have not been studied in detail for …

Zinc Oxide Random Laser Threshold Enhancement Via Addition Of Passive Scatterers, Zachariah M. Peterson, Rolf Könenkamp, Robert Campbell Word

Student Research Symposium

Zinc oxide (ZnO) is a wide bandgap n-type semiconductor with a variety of optical and electrical applications and many methods of fabrication. Strong optical scattering and photoluminescence from ZnO nanoparticles and films makes the material an ideal candidate for a random laser. Previous studies have shown both incoherent and coherent random lasing from ZnO films and particles agglomerations. When used as a passive scatterer in a laser dye gain medium, the addition of ZnO has been shown to improve the threshold for lasing. By combining active scattering ZnO with a passive scatterer, MgO, we show here that the lasing threshold …

Measuring The Refractive Index Of Infrared Materials By Dual-Wavelength Fabry-Perot Interferometry, Griffin Taylor

Physics

No abstract provided.

External Cavity Mode-Locked Semiconductor Lasers For The Generation Of Ultra-Low Noise Multi-Gigahertz Frequency Combs And Applications In Multi-Heterodyne Detection Of Arbitrary Optical Waveforms, Josue Davila-Rodriguez

Electronic Theses and Dissertations

The construction and characterization of ultra-low noise semiconductor-based mode-locked lasers as frequency comb sources with multi-gigahertz combline-to-combline spacing is studied in this dissertation. Several different systems were built and characterized. The first of these systems includes a novel mode-locking mechanism based on phase modulation and periodic spectral filtering. This mode-locked laser design uses the same intra-cavity elements for both mode-locking and frequency stabilization to an intra-cavity, 1,000 Finesse, Fabry-Pérot Etalon (FPE). On a separate effort, a mode-locked laser based on a Slab-Coupled Optical Waveguide Amplifier (SCOWA) was built. This system generates a pulse-train with residual timing jitter of

Metrology Of Volume Chirped Bragg Gratings Recorded In Photo-Thermo-Refractive Glass For Ultrashort Pulse Stretching And Compressing, Christopher Lantigua

Electronic Theses and Dissertations

Chirped Bragg gratings (CBGs) recorded in photo-thermo-refractive (PTR) glass provide a very efficient and robust way to stretch and compress ultra-short laser pulses. These gratings offer the ability to stretch pulses from hundreds of femtoseconds, to the order of 1 ns and then recompress them. However, in order to achieve pulse stretching of this magnitude, 100 mm thick CBGs are needed. Using these CBGs to both stretch, and re-compress the pulse thus requires propagation through 200 mm of optical glass. This therefore demands perfect control of the glass homogeneity, as well as the holographic recording process of the CBG. In …

Ultrafast Laser-Induced Damage And The Influence Of Spectral Effects, Jeremy Gulley

Jeremy R. Gulley

Numerous studies have investigated the prerequisite role of photoionization in ultrafast laser-induced damage (LID) of bulk dielectrics. This study examines the role of spectral width and instantaneous laser frequency in LID using a frequency dependent multiphoton ionization (MPI) model and numerical simulation of initially 800 nm laser pulses propagating through fused silica. Assuming a band gap of 9 eV, MPI by an 800 nm field is a six-photon process, but when the instantaneous wavelength is greater than 827 nm an additional photon is required for photoionization, reducing the probability of the event by many orders of magnitude. Simulation results suggest …

Modeling Free-Carrier Absorption And Avalanching By Ultrashort Laser Pulses, Jeremy Gulley

Jeremy R. Gulley

In the past decade it was demonstrated experimentally that negatively-chirped laser pulses can lower the surface LIDT for wide band-gap materials by decreasing the number of photons required for photoionization on the leading edge of the pulse. Similarly, simulations have shown that positively-chirped pulses resulting from selffocusing and self-phase modulation in bulk dielectrics can alter the onset of laser-induced material modifications by increasing the number of photons required for photoionization on the leading edge of the pulse. However, the role of multi-chromatic effects in free-carrier absorption and avalanching has yet to be addressed. In this work a frequency-selective model of …

Ultra High Density Spectral Beam Combining By Thermal Tuning Of Volume Bragg Gratings In Photo-Thermo-Refractive Glass, Derrek Drachenberg

Electronic Theses and Dissertations

High power lasers with diffraction limited beam quality are desired for many applications in defense and manufacturing. A lot of applications require laser beams at the 100 kW power level along with divergence close to the diffraction limit. The figure of merit for a beam used in such applications should be radiance which determines the laser power delivered to a remote target. One of the primary limiting factors is thermal distortion of a laser beam caused by excessive heat generated in the laser media. Combination of multiple laser beams is usually considered as a method to mitigate these limitations. Spectral …

Generation Of Mid-Ir Wavelengths, Deborah Robinson, Robert Hartsock, Kelly Gaffney

STAR Program Research Presentations

Generation of mid-IR wavelengths

Deborah Robinson, Robert Hartsock, and Kelly Gaffney

Abstract

Research to determine basic molecular properties utilizing pump/probe experiments is an on going effort at SLAC. Here we have been given the task to generate mid-IR laser pulses and commission a mid-IR detector for said experiments and research. The mid-IR pulses will be used to probe the changes in molecular properties induced by exciting the electrons in molecules with visible pump pulses. In order to accomplish this, an optical parametric amplifier (OPA) has been set-up and aligned. The pump beam for the OPA is a 40 femtosecond 800nm …

Coupled Photonic Crystal Micro-Cavities With Ultra-Low Threshold Power For Stiumulated Raman Scattering, Qiang Liu, Zhengbiao Ouyang, Sacharia Albin

Electrical & Computer Engineering Faculty Publications

We propose coupled cavities to realize a strong enhancement of the Raman scattering. Five sub cavities are embedded in the photonic crystals. Simulations through finite-difference time-domain (FDTD) method demonstrate that one cavity, which is used to propagate the pump beam at the optical-communication wavelength, has a Q factor as high as 1.254 × 10⁸ and modal volume as small as 0.03μm³ (0.3192(λ/n)³). These parameters result in ultra-small threshold lasing power ~17.7nW and 2.58nW for Stokes and anti-Stokes respectively. The cavities are designed to support the required Stokes and anti-Stokes modal spacing in silicon. The proposed structure …

Tunable Optical Delay In Doppler-Broadened Cesium Vapor, Monte D. Anderson

Theses and Dissertations

Variable-delay tunable optical delay line or optical buffers are critical for the development of all-optical networks components as well as interferometry and analytic instruments. Recent research on slow light may hold the key for the development of the first practical tunable optical delay device. In this research the linear dispersion delay effects in an alkali vapor. The hyperfine relaxation observations present insight into the complex bleach wave dynamics during a high-intensity pulsed pump in DPAL systems.

Frequency Dependence In The Initiation Of Laser-Induced Damage, Jeremy Gulley

Jeremy R. Gulley

Numerous studies have investigated the role of photoionization in ultrafast laser-induced damage of bulk dielectrics. This study examines the role of spectral width and instantaneous laser frequency in laser-induced damage using a frequency dependent multiphoton ionization model and numerical simulation of an 800 nm laser pulse propagating through fused silica. When the individual photon wavelengths are greater than 827 nm, an additional photon is required for photoionization, reducing the probability of the event by many orders of magnitude. Simulation results suggest that this frequency dependence may significantly affect the processes of laser-induced damage and filamentation.

Rubidium Recycling In A High Intensity Short Duration Pulsed Alkali Laser, Wooddy S. Miller

Theses and Dissertations

Laser induced fluorescence was used to study how pump pulse duration and alkali recycle time effects maximum power output in a Diode Pumped Alkali Laser (DPAL) system. A high intensity short pulsed pump source was used to excited rubidium atoms inside a DPAL-type laser. The maximum output power of the laser showed a strong dependence upon the temporal width of the pump pulse in addition to the input pump intensity. A linear relationship was observed between the maximum output power and the pulse width due to the effective lifetime of the excited state, defined as the time it takes for …

Cholesteric Liquid Crystal Photonic Crystal Lasers And Photonic Devices, Ying Zhou

Electronic Theses and Dissertations

This dissertation discusses cholesteric liquid crystals (CLCs) and polymers based photonic devices including one-dimensional (1D) photonic crystal lasers and broadband circular polarizers. CLCs showing unique self-organized chiral structures have been widely used in bistable displays, flexible displays, and reflectors. However, the photonic band gap they exhibit opens a new way for generating laser light at the photonic band edge (PBE) or inside the band gap. When doped with an emissive laser dye, cholesteric liquid crystals provide distributed feedback so that mirrorless lasing is hence possible. Due to the limited surface anchoring, the thickness of gain medium and feedback length is …