Physics Commons^™

Variable Renewable Energy In Modeling Climate Change Mitigation Scenarios, Falko Ueckerdt, Robert J. Brecha, Gunnar Luderer, Patrick Sullivan, Eva Schmid, Nico Bauer, Diana Böttger

Physics Faculty Publications

This paper addresses the issue of how to account for short‐term temporal variability of renewable energy sources and power demand in long‐term climate change mitigation scenarios in energy‐economic models. An approach that captures in a stylized way the major challenges to the integration of variable renewable energy sources into power systems has been developed. As a first application this approach has been introduced to REMIND‐D, a hybrid energy‐economy model of Germany. An approximation of the residual load duration curve is implemented. The approximating function endogenously changes depending on the penetration and mix of variable renewable power. The approach can thus …

Logistic Curves, Extraction Costs And The Effective Size Of Oil Resources, Robert J. Brecha

Physics Faculty Publications

The size of potential fossil fuel resources is an issue of perennial interest and controversy. Fundamentally, there appears to be a conflict in interpretation of available data for both past and future extraction histories. As fossil-fuel prices rose dramatically over the past several years, the question of resources once again became acute. In this paper we concentrate on conventional and non-conventional oil resources and make four main points, with the overarching theme that one can determine an effective oil resource that represents significantly less availability for consumption than usually posited by tallying resources in place.

First, looking at oil production …

Prioritizing Investment In Residential Energy Efficiency And Renewable Energy: A Case Study For The U.S. Midwest, Robert J. Brecha, Austin Mitchell, Kevin P. Hallinan, J. Kelly Kissock

Physics Faculty Publications

Residential building energy use is an important contributor to greenhouse gas emissions and in the United States represents about 20% of total energy consumption. A number of previous macro-scale studies of residential energy consumption and energy-efficiency improvements are mainly concerned with national or international aggregate potential savings. In this paper we look into the details of how a collection of specific homes in one region might reduce energy consumption and carbon emissions, with particular attention given to some practical limits to what can be achieved by upgrading the existing residential building stock. Using a simple model of residential, single-family home …

Establishing Building Recommissioning Priorities And Potential Energy Savings From Utility Energy Data, Kevin P. Hallinan, Philip Brodrick, Jessica Northridge, J. Kelly Kissock, Robert J. Brecha

Physics Faculty Publications

An energy reduction program for commercial buildings is implemented for a SW Ohio natural gas utility. The aim of this study is to demonstrate that historical utility data for individual building customers, along with knowledge of pertinent building information (square footage, year built, number of floors, height of floors, wall construction type, and use type) available in county auditor databases, could be used to identify the best candidate buildings for recommissioning in terms of energy savings and simple payback. A study is completed for all natural gas customers of a utility in Montgomery and Clinton counties in Ohio. A total …

Targeting Residential Energy Reduction For City Utilities Using Historical Electrical Utility Data And Readily Available Building Data, Kevin P. Hallinan, J. Kelly Kissock, Robert J. Brecha, Austin Mitchell

Physics Faculty Publications

Energy use data for the eight-year period 2003–2010 was analyzed for over 1200 single family residences in Village of Yellow Springs, Ohio. Electricity, natural gas, residential building, and weather databases are merged to permit determination of the energy intensity of each home in the village. The energy use intensity for each home is disaggregated into weather independent and weather dependent electric and natural gas use. This use is compared to typical baseline, cooling, and heating energy use for the region. From this comparison, priority homes are identified for energy reduction investment. Collective potential low cost energy reduction is estimated for …

Analysis Of Hom Properties Of Superconducting Parallel-Bar Deflecting/Crabbing Cavities, Subashini De Silva, Jean R. Delayen

Physics Faculty Publications

The superconducting parallel-bar cavity is currently being considered for a number of deflecting and crabbing applications due to improved properties and compact design geometries. The 499 MHz deflecting cavity proposed for the Jefferson Lab 12 GeV upgrade and the 400 MHz crab cavity for the proposed LHC luminosity upgrade are two of the major applications. For high current applications the higher order modes must be damped to acceptable levels to eliminate any beam instabilities. The frequencies and R/Q of the HOMs and mode separation are evaluated and compared for different parallel-bar cavity designs.

Crab Crossing Schemes And Studies For Electron Ion Collider, S. Ahmed, Y. Derbenev, V. Morozov, A. Castilla, Geoffrey A. Krafft, B. Yunn, Subashini U. De Silva, Jean R. Delayen

Physics Faculty Publications

This report shows our progress in crab crossing consideration for future electron-ion collider envisioned at JLab. In this design phase, we are evaluating two crabbing schemes viz., the deflecting and dispersive. The mathematical formulations and lattice design for these schemes are discussed in this paper. Numerical simulations involving particle tracking through a realistic deflecting RF cavity and optics illustrate the desired crab tilt of 25 mrad for 1.35 MV. Evolution of beam propagation are shown which provides the physical insight of the crabbing phenomenon.

Design Of Superconducting Spoke Cavities For High-Velocity Applications, Jean R. Delayen, Subashini De Silva, C. S. Hopper

Physics Faculty Publications

Superconducting single- and multi-spoke cavities have been designed to-date for particle velocities from β₀ ~ 0.15 to β₀ ~ 0.65. Superconducting spoke cavities may also be of interest for higher-velocity, low-frequency applications, either for hadrons or electrons. We present the design of spoke cavities optimized for β₀ = 0.8 and β₀ = 1.

Design Of Superconducting Parallel Bar Cavities For Deflecting/Crabbing Applications, Jean R. Delayen, Subashini De Silva

Physics Faculty Publications

The superconducting parallel-bar cavity is a deflecting/ crabbing cavity with attractive properties, compared to other conventional designs, that is currently being considered for a number of applications. The new parallel-bar design with curved loading elements and circular or elliptical outer conductors have improved properties compared to the designs with rectangular outer conductors. We present the designs proposed as the deflecting cavities for the Jefferson Lab 12 GeV upgrade and for Project-X and crabbing cavities for the proposed LHC luminosity upgrade and electron-ion collider at Jefferson Lab.

Beam Dynamics Studies Of Parallel-Bar Deflecting Cavities, S. Ahmed, G. A. Krafft, K. Deitrick, Subashini U. De Silva, Jean R. Delayen, M. Spata, M. Tiefenback, A. Hofler, K. Beard

Physics Faculty Publications

We have performed three-dimensional simulations of beam dynamics for parallel-bar transverse electromagnetic mode (TEM) type RF separators: normal- and superconducting. The compact size of these cavities as compared to conventional TM110 type structures is more attractive particularly at low frequency. Highly concentrated electromagnetic fields between the parallel bars provide strong electrical stability to the beam for any mechanical disturbance. An array of eight 2-cell normal conducting cavities or a one- or two-cell superconducting structure are enough to produce the required vertical displacement at the Lambertson magnet. Both the normal and superconducting structures show very small emittance dilution due to the …

Fundamental And Hom Coupler Design Of The Superconducting Parallel-Bar Cavities, Subashini De Silva, Jean R. Delayen

Physics Faculty Publications

The superconducting parallel-bar cavity [1] is currently being considered as a deflecting system for the Jefferson Lab 12 GeV upgrade and as a crabbing cavity for a possible LHC luminosity upgrade. Currently the designs are optimized to achieve lower surface fields within the dimensional constraints for the above applications. A detailed analysis of the fundamental input power coupler design for the parallel-bar cavity is performed considering beam loading and the effects of microphonics. For higher beam loading the damping of the HOMs is vital to reduce beam instabilities generated due to the wake fields. An analysis of threshold impedances for …

Multipacting Analysis Of The Superconducting Parallel-Bar Cavity, Subashini De Silva, Jean R. Delayen

Physics Faculty Publications

The superconducting parallel-bar cavity [1] is a deflecting/crabbing cavity with attractive properties, compared to other conventional designs, that is being considered for a number of applications. Multipacting can be a limiting factor to the performance of in any superconducting structure. In the parallel-bar cavity the main contribution to the deflection is due to the transverse deflecting voltage, between the parallel bars, making the design potentially prone to multipacting. This paper presents the results of analytical calculations and numerical simulations of multipacting in the parallel-bar cavity with resonant voltage, impact energies and corresponding particle trajectories.

Mechanical Study Of Superconducting Parallel-Bar Deflecting/Crabbing Cavities, Hyekyoung Park, Jean R. Delayen, Subashini De Silva

Physics Faculty Publications

The superconducting parallel-bar deflecting/crabbing cavities have improved properties compared to conventional cavity structures. It is currently being considered for number of applications. The mechanical design analysis is performed on two designs of the 499 MHz parallel-bar deflecting cavity for the Jefferson Lab 12 GeV upgrade. The main purpose of the mechanical study is to examine the structural stability of the cavities under the operating conditions in the accelerators. The study results will suggest the need for additional structural strengthening. Also the study results will help to develop a concept of the tuning method. If the cavity is to be installed …

Design Of Low-Frequency Superconducting Spoke Cavities For High-Velocity Applications, Jean R. Delayen, C. S. Hopper, R. G. Olave

Physics Faculty Publications

Superconducting single- and multi-spoke cavities have been designed to-date for particle velocities from β~0.15 to β~0.65. Superconducting spoke cavities may also be of interest for higher-velocity, low-frequency applications, either for hadrons or electrons. We present the design of 325 and 352 MHz spoke cavities optimized for β=0.8 and β=1.

Design Of Superconducting Multi-Spoke Cavities For High Velocity Applications, C. S. Hopper, Jean R. Delayen

Physics Faculty Publications

Superconducting spoke cavities have been designed and tested for particle velocities up to β₀ ~ 0.6 and are currently being designed for velocities up to β₀ = 1. We present the electromagnetic designs for two-spoke cavities operating at 325 MHz for β₀ = 0.82 and β₀ = 1.

Higher Order Mode Properties Of Superconducting Two-Spoke Cavities, C. S. Hopper, Jean R. Delayen, R. G. Olave

Physics Faculty Publications

Multi-Spoke cavities lack the cylindrical symmetry that many other cavity types have, which leads to a more complex Higher Order Mode (HOM) spectrum. In addition, spoke cavities offer a large velocity acceptance which means we must perform a detailed analysis of the particle velocity dependence for each mode's R/Q. We present here a study of the HOM properties of two-spoke cavities designed for high-velocity applications. Frequencies, R/Q and field profiles of HOMs have been calculated and are reported.

Conceptual Design Of A Polarized Medium Energy Electron-Ion Collider At Jlab, S. Ahmed, A. Bogacz, Ya. Derbenev, A. Hutton, Geoffrey Krafft, R. Li, V. Morozov, F. Pilat, R. Rimmer, Y. Roblin, T. Satogata, M. Spata, B. Terzić, M. Tiefenback, H. Wang, B. Yunn, Y. Zhang, P. Chetsov, Jean R. Delayen, Subashini Desilva, Hisham Sayed, V. Dudnikov, R. Johnson, F. Marhauser, M. Sullivan, S. Manikonda, P. N. Ostroumov, S. Abeyratne, B. Erdelyi, Y. Kim, A. Kondratenko

Physics Faculty Publications

A medium energy electron-ion collider is envisioned as the primary future of the JLab nuclear science program beyond the 12 GeV upgraded CEBAF. The present conceptual design selects a ring-ring collider option, covers a CM energy range up to 65 GeV for collisions of polarized electrons with polarized light ions or unpolarized light to heavy ions, and reaches a luminosity at above 10³⁴ cm^-2s^-1 per detector over multiple interaction points. This paper presents a brief description of the current conceptual design of the accelerator.

Design Of Superconducting Parallel Bar Deflecting/Crabbing Cavities, Jean R. Delayen, Subashini De Silva

Physics Faculty Publications

The superconducting parallel-bar cavity is a deflecting/crabbing cavity with attractive properties, compared to other conventional designs, that is being considered for a number of applications. We present an analysis of several designs of parallel-bar cavities and their electromagnetic properties.

Crab Crossing Consideration For Meic, S. Ahmed, Y. Derbenev, Geoffrey A. Krafft, Y. Zhang, Subashini De Silva, Jean R. Delayen, A. Castilla

Physics Faculty Publications

Crab crossing of colliding electron and ion beams is essential for accommodating the high bunch repetition frequency in the conceptual design of MEIC – a high luminosity polarized electron-ion collider at Jefferson Lab. The scheme eliminates parasitic beam-beam interactions and avoids luminosity reduction by restoring head-on collisions at interaction points. In this paper, we report the possible crabbing schemes and requirements for both electron and proton beams.

Design Of Superconducting Parallel-Bar Deflecting/Crabbing Cavities With Improved Properties, Jean R. Delayen, Subashini De Silva

Physics Faculty Publications

The superconducting parallel-bar cavity is a deflecting/crabbing cavity with attractive properties, compared to other conventional designs, that is being considered for a number of applications. All designs to-date have been based on straight loading elements and rectangular outer conductors. We present new designs of parallel-bar cavities using curved loading elements and circular or elliptical outer conductors, with significantly improved properties such as reduced surface fields and wider higher-order mode separation.