Chemistry Commons^™

Studying The Stability Of Collagen/Heparin Coatings To Be Used In Cell Therapy Applications, Gavin Mussino

Biological Sciences Undergraduate Honors Theses

This honors thesis aims to investigate the reusability and performance of cell coatings for cell therapy applications. Cell therapy, which involves the use of human cells to repair or replace damaged tissues, holds immense potential for medical advancements. However, ensuring the survival and functionality of transplanted cells remains a significant challenge. We focused on studying the effectiveness of coatings applied to cells for improved cell growth and viability. The research project involved the preparation of the coatings using a layer-by-layer method and the subsequent seeding of cells. The coated cells were then subjected to a series of experiments to assess …

Microscale Chemical Manipulation And Imaging Using Photoactive Molecules And Light, Uroob Haris

Chemistry Theses and Dissertations

Chemical manipulation with light has been an active and growing area of research with important implications in materials science, biotechnology, and environmental science. From early investigations of light sensitive materials for photography in the 19^th century, to printing billions of transistors on a semiconductor chip in present day, scientists have gained a deep understanding of photochemistry and the processes that allow us to harness light for everyday applications. In this work, we explore microscale fabrication and molecular imaging using light and photoactive molecules as foundational tools. We develop a visible-light mediated technique for high resolution microscale chemical lithography comprising …

Novel Technique In Production Of Pb (Ii)- Imprinted Polymers, Ehab Mohammed, Mostafa M. Elsheikh, Adham A. El-Zomrawy, Farag A. Ahmed

Al-Azhar Bulletin of Science

Ion imprinting techniques were used to produce ion imprinted polymer (IIP) particles for the selective removal of Pb2+ from aqueous environments. As the Templating monomers, acrylic acid, acrylic amine ligand, and Methylene Bisacrylamide crosslinker were chosen. The imprinted polymer was prepared by free radical polymerization. By leaching with 0.1 M HCl, the (Pb2+) ion was removed from the template. The polymer particles were characterized by IR spectroscopy, Thermal analysis and potentiometric analysis. The produced polymer was mechanically crushed into fine particles, assembled into a sensor probe, and linked to a bare HB graphite pencil electrode (GPE). The sensor has a …

Expanding The Polymer Zwitterion Library – Novel Phosphonium-Based Polymer Zwitterions And Analogous Structures, Marcel U. Brown

Doctoral Dissertations

This dissertation encompasses the synthesis, characterization and application of novel polymer zwitterions that significantly expand the library of available zwitterionic polymers. Their facile synthesis is facilitated by the preparation of a novel functional sultone precursor molecule, which can be ring-opened by commercially available phosphine, amine and sulfide nucleophiles, affording phosphonium, ammonium or sulfonium sulfonate monomers, respectively. Most notably, this work describes the invention of phosphonium-based polymer zwitterions, establishing a new class of zwitterionic polymer structures with unique solution and interfacial properties. Furthermore, the incorporation of these phosphonium sulfonates into block copolymer architectures with conventional polymer zwitterions, and the resulting switchable …

Synthesis And Conductivity Analysis Of A Methyl (Polyethylene Glycol) Comb Polymer, Olivia Fox

Honors Theses

The overall goal of work in this field is to improve materials for use in a variety of applications in fuel cell and battery production. This thesis specifically investigates the synthesis of two variations of a methyl (polyethylene glycol) comb polymer electrolyte (MePEG_nwhere n=7) to understand how the molecular structure of an ion-conducting polymer affects its electrochemical properties. The MePEG used in this synthesis contains seven ethylene glycol groups and was added to a poly (methylhydrosiloxane) comb polymer backbone. In the first sample, the polymer contained only the MePEG sidechain, and in the second sample, the polymer contained …

Degradation Of Natural And Synthetic Fibers In Various Aqueous Environments, Jaylin Bryant

Honors Scholars Collaborative Projects

Fabrics are one variant of polymers, macromolecules that form the foundation of our society. They consist of small subunits called monomers, which are covalently bonded together and layered over each other through intermolecular attractions. There are natural fabrics, such as cotton and silk, and synthetic fabrics like polyester and rayon. Scientists in forensic taphonomy study postmortem changes made to human remains, which can also include clothes found at the scene. In this study, the degradation rates of four white fabrics (cotton, polyester, rayon, and silk) were observed in various aqueous environments (pure, chlorinated, sea, and lake) in order to observe …

In Depth Characterisation Of The Biomolecular Coronas Of Polymer Coated Inorganic Nanoparticles With Differential Centrifugal Sedimentation, André Perez-Potti, Hender Lopez, Beatriz Pelaz, Abuelmagd Abdelmonem, Mahmoud G. Soliman, Ingmar Schoen, Philip M. Kelly, Kenneth A. Dawson, Wolfgang J. Parak, Zeljka Krpetic, Marco P. Monopoli

Articles

Advances in nanofabrication methods have enabled the tailoring of new strategies towards the controlled production of nanoparticles with attractive applications in healthcare. In many cases, their characterisation remains a big challenge, particularly for small-sized functional nanoparticles of 5 nm diameter or smaller, where current particle sizing techniques struggle to provide the required sensitivity and accuracy. There is a clear need for the development of new reliable characterisation approaches for the physico-chemical characterisation of nanoparticles with significant accuracy, particularly for the analysis of the particles in the presence of complex biological fluids. Herein, we show that the Differential Centrifugal Sedimentation can …

Reversible Addition-Fragmentation Chain-Transfer Emulsion Polymerization And Its Application To Waterborne Coatings, Andrew Balgeman

Graduate Research Theses & Dissertations

Waterborne acrylic latex makes up a vast majority of the architectural coatings market, including most of the paints sold in retail stores. Most, if not all, of these latex formulations are prepared using radical polymerization of acrylic monomers. Reversible addition-fragmentation chain-transfer (RAFT) polymerization has been researched for over two decades, but to this point has made very little progress finding success in commercial applications. Indeed, a majority of RAFT research has been dedicated to successfully polymerizing different monomers with good degree of polymerization control, and very little research has been directed toward actual coating applications. In this study, we focused …

Visualization Without Vision – How Blind And Visually Impaired Students And Researchers Engage With Molecular Structures, Croix J. Laconsay, Henry B. Wedler, Dean J. Tantillo

Journal of Science Education for Students with Disabilities

This article examines the tools and techniques currently available that enable blind and visually impaired (BVI) individuals to visualize three-dimensional objects used in learning chemistry concepts. How BVI individuals engage with and visualize molecular structure is discussed and recent tactile (or haptic) and auditory methods for visualization of various chemistry concepts are summarized. Remaining challenges for chemistry education researchers are described with the aim of highlighting the potential value of educational research in further enabling BVI students to pursue careers in science, technology, engineering, and mathematics (STEM) fields.

I. Non-Degradable Polysiloxane Networks For Controlled Release Applications, And Ii. Additive Free, Degradable Silyl-Ether Furyl-Maleimide Networks, Caleb M. Bunton

Chemistry Theses and Dissertations

I. Two different series of non–degradable polysiloxane networks were prepared for the encapsulation and controlled release of a small molecule agent. For the first series, hydrosilylation was utilized to prepare networks of varying crosslink densities, as determined from swelling studies, from vinyl terminated and silylhydride functional poly(dimethyl)siloxanes. For the second series, the thiol-ene reaction was utilized to prepare networks of varying crosslink densities, as determined from swelling studies, from vinyl terminated and mercaptopropyl functional poly(dimethyl)siloxanes. Nile red dye was used as an encapsulated agent and dye release from each series of networks was measured using UV–vis spectroscopy to determine controllability …

Research And Review Of Polymethyl-Methacrylate Copolymers In The Development Of Enhanced Pharmaceutical Delivery Systems, Jake Dyess

Senior Honors Theses

The following thesis shall primarily explore the current research regarding the implementation of modifiable microscopic and nanoscopic polymer particles as novel pharmaceutical delivery systems. Polymethacrylate-based copolymers, such as Eudragit^TM, are sensitive to alterations in pH levels, becoming increasingly more soluble in response to an increase in pH. The selective solubility and modifiable nature of these polymers allows for greater flexibility of treatment options for patients (Patra et al., 2017). The wide range of functionality of polymethacrylate (PMA) may provide solutions to challenges relating to the current treatment and therapy of certain conditions. Research indicates that PMA based micro- …

Synthesis Of Bio-Based Polymer Products, Joshua Sukie

Williams Honors College, Honors Research Projects

The project covers the synthesis of two bio-based polymers. One aspect of the research investigates the synthesis of materials for use in vegetable oil-based UV-curable coating, and the subsequent polymerization of the materials into a coating film. The second aspect of the research follows the synthesis of a functionalized cellulose material for use as a reinforcer in a vegetable oil-based composite. Both products are subsequently analyzed by various methods.

Hypervalent Iodine Compounds With Carboxylate And Tetrazolate Ligands, Avichal Vaish

Chemistry Theses and Dissertations

In modern organic chemistry, hypervalent (HV) iodine(III) compounds are frequently used as oxidizing agents but application of λ³-iodanes in polymer and material chemistry is still underexplored. This dissertation describes the preparation of dynamic and self-healing materials by employing ligand exchange reactions involving HV iodine(III) compounds of the type ArIL₂ (Ar = Aryl, L = ligand, e.g., carboxylate or (pseudo)halide). These compounds can undergo ligand exchange reactions in presence of nucleophiles (Nu^-) to form ArINu₂. Diacetoxyiodo benzene was successfully employed as a crosslinker to prepare dynamic and self-healing gels derived from carboxylate-containing polymers. Furthermore, …

Polyarylenes: Synthesis And Characterization Towards Advanced Applications, Stephen Budy

Chemistry Theses and Dissertations

A series of semi-fluorinated and non-fluorinated Diels−Alder step-growth polyarylene polymers and co-polymers were synthesized via typical oil bath heating (days/weeks) and more rapid microwave-assisted polymerization (hours). The polymers were characterized by multi-nuclear (¹H, ¹³C, and ¹⁹F) NMR and ATR−FTIR spectroscopy, thermal analysis (TGA, DSC, and DMA), GPC, XRD, water contact analysis (WCA), and refractive index (RI) measurements. The NMR spectra indicated a mixture of para and meta conformations through the polymer backbone increasing to more para with greater fluorine content. Thermal gravimetric analysis revealed the fluorine-containing polyarylenes possessed the highest char yields at almost 80% at …

Hierarchical Conjugated Polymer Systems Prepared By Controlled Chain-Growth Polymerization, Chunwa Peter Kei

LSU Doctoral Dissertations

π-Conjugated polymer materials may have a significant economic impact on society by providing means for designing affordable, flexible, and portable organic electronic devices. Their successful commercialization will depend on major scientific advancements, which will challenge human society to seek out ever more detailed and fundamental processes to command. Controlled polymerization affords such a power; allowing for the design of meticulous and precisely defined systems granting detailed insight into structure-property relationships in the polymer materials and bettering understanding of novel physical phenomena.

This dissertation primarily focuses on development and preparation of well-defined hierarchically organized macromolecular systems. The novel chain-growth polymerization methodologies …

Hypervalent Iodine(Iii) Compounds With (Pseudo)Halide And Tetrazole Ligands In The Synthesis Of Functional Polymers, Rajesh Kumar

Chemistry Theses and Dissertations

The organic compounds of iodine(III) with the general formula ArIL₂ (Ar = aryl, L = (pseudo) halides) degrade homolytically upon irradiation or heating to the corresponding monovalent iodine compound (ArI) and the radicals L^• . If the latter contains a functional group, they can be used to initiate the polymerization of vinyl monomers to afford chain end-functionalized linear polymers. When "conventional" monovinyl monomers are copolymerized with di- or multivinyl monomers (crosslinkers) in the presence of relatively high concentrations of rapidly decomposing ArIL₂ compounds, highly branched polymers are formed that contain multiple chain-end functionalities derived from the radicals …

Glucosamine From Hydrolysis Of 3d Printing Chitosan For Osteoarthritis Treatment, Ruj Dansriboon, Laphon Premcharoen

The International Student Science Fair 2018

This project aims to introduce a new way for osteoarthritis treatment which is expected to increase in the future. Glucosamine is the main subject for a treatment, which can be derived by hydrolyzing chitosan. This project also includes extraction of chitosan from shrimp waste to make a worthy use of food waste from industry. In this project, 3D printer is applied to print chitosan gel since 3D printing is adjustable to form various shapes of the gel.

The research process begins with the extraction of chitosan from shrimp shells. For the next step, the percent of deacetylation of chitosan was …

An Entirely New Molecular Glue For Mof Using Unusual Structural Transformation Of A Coordination Polymer, Sukwoo Jung, Hangyeol Kim, Junseok Ahn

The International Student Science Fair 2018

In this research, an entirely new molecular glue is reported. This ‘coordination polymer glue’ is synthesized from zinc metal and BDC-NPE(2,5-bis{4-[1-(4-nitrophenyl)ethylamino]butoxy}terephthalic acid). Molecular glue transforms from 1D coordination polymer to a 3D cross-linked framework, resulting in a phase change of solution to solid. The carboxylate group of this glue makes the preformed MOF bind to its framework. Therefore, when the solution of molecular glue is mixed with preformed MOF powder and heated, homogeneous and thin MOF film – MOF/ZnNPE film – is fabricated. The film is irrelevant to the kind of its substrate, and its thermal stability was enhanced in …

Synthesis Of A Silsesquioxane Based Supramolecular Polymer, Rachel Bianculli

Honors Projects

Research toward smart materials, specifically self-healing polymers, is an expanding topic within the materials science field. These materials rely heavily on dynamic crosslinking that is achieved by inducing different degrees of hydrogen bonding, van der Waals forces, etc. This work, demonstrated by research previously done within the Ostrowski research group, shows how coordination bonds of transition metals have been shown to create light activated, self-healing properties. Work done with these light-activated chromium (III) complexes with a poly(butylyene-co-ethylene) backbone have shown how metal—ligand coordination geometries can tune mechanical properties of the polymeric material. However, these materials suffer from being incredibly soft …

Multi-Scale Assembly Methodologies Of Poly(3-Hexylthiophene) Derivative Systems For Enhanced Optoelectronic Anisotropy, David William Bilger

Master's Theses

Conjugated polymers represent a class of semi-conducting materials with numerous applications in optoelectronic devices, including organic light-emitting diodes, field-effect transistors, and photovoltaics. Because of the numerous advantages of macromolecular systems, including solution processing and mechanical flexibility, conjugated polymers have become a burgeoning field of research with the hopes of producing cost-effective solution-based electronics. Importantly, optoelectronic device performance is heavily influenced by conjugated polymer backbone orientation and overall thin film morphology. As such, the processing conditions of these systems are important to the construction of high- performance optoelectronics. Polythiophenes are model conjugated polymers that have been studied extensively in halogenated organic …

Characterization Of S-Swcnt/Pf-Pd Dispersions And Networks, Tamara N. El-Hayek Ms., Jeffrey Blackburn, Andrew Ferguson, Tammy Pheuphong

STAR Program Research Presentations

Single-Walled Carbon Nanotubes (SWCNTs) are being investigated for their use in a wide variety of renewable energy applications. Their unique physical properties contribute to desirable traits such as a high carrier mobility, strong optical absorption and tunable electronic band gap. Unfortunately, due to variability in certain parameters, SWCNTs are limited in their application. The major drawback is that SWCNTs are variable in size and type and typical synthetic methods are not selective. As a result, selective methods must be developed in order to sort these tubes and extract those which are desirable for a particular application. Though there are several …

Morphology-Property Relationship For Binary Organic Thin Films, Alyssa Lynn Griffin

Master's Theses

Organic thin films can be readily mass-produced through solution-based fabrication methods including ink-printing and solution-casting because their light weight, flexibility, and inexpensive sources. Their applications range from organic field-effect transistors (OFET), organic solar cells (OSC), to organic light emitting diodes (OLEDs). Compared with pure component films, binary organic thin films (BOTF) allows for novel characteristics and specialized features to handle more demanding tasks. Due to the complex intermolecular interactions in BOTF, various microscopic phases with different morphological and electronic properties may be formed and this information is difficult to extract through conventional bulk measurements.

Organic thin films can be readily …

Characterization Of Noncovalent Complexes Of Polyelectrolytes By Mass Spectrometry, Anthony J. Marino

Williams Honors College, Honors Research Projects

Various ions of poly-L-lysine and polystyrene sulfonic acid were successfully observed first within a matrix-assisted laser desorption/ionization mass spectrometer and subsequently in an electrospray ionization mass spectrometer. The successful ionization of these polymers allowed for studies to be performed on the noncovalent interactions between the two. Noncovalent interactions were effectively studied on both instruments, but further quantified using tandem mass spectrometry found within the MALDI system and ion-mobility mass spectrometry found within the electrospray ionization system. As a result of employing the use of ion-mobility, various different stoichiometries and charges of polyelectrolyte complexes could be distinguished.

Self-Assembly And Ring-Opening Metathesis Polymerization Of A Bifunctional Carbonate–Stilbene Macrocycle, Yuewen Xu, Weiwei L. Xu, Mark D. Smith, Linda S. Shimizu

Faculty Publications

No abstract provided.

Nanoparticles And Polymer Crystallization Kinetics In Hybrid Electronic Devices, Taylor William Wagner

Master's Theses

Conjugated semi-conducting polymers have become well known for their potential applications in hybrid electronic devices like solar cells, LEDs, and organic displays. These hybrid devices also contain inorganic nanoparticles, which complement the polymer when they are combined into the same layer. Control over the conformation and crystallinity of the polymer is critical for device performance, yet not much is known about the effect that these nanoparticles have on the polymer. Here, zinc oxide nanowire was surface modified with mono-substituted-carboxylic acid tetraphenylporphyrin and dodecanethiol, and introduced to poly(3-hexyl thiophene) in solution. The electron transfer, kinetics, and thermodynamics of this system were …

Controlling Nanoparticle Dispersion For Nanoscopic Self-Assembly, Nathan S. Starkweather

Master's Theses

Nanotechnology is the manipulation of matter and devices on the nanometer scale. Below the critical dimension length of 100nm, materials begin to display vastly different properties than their macro- or micro- scale counterparts. The exotic properties of nanomaterials may trigger the start of a new technological revolution, similar to the electronics revolution of the late 20^th century. Current applications of nanotechnology primarily make use of nanoparticles in bulk, often being made into composites or mixtures. While these materials have fantastic properties, organization of nano and microstructures of nanoparticles may allow the development of novel devices with many unique properties. …

Surge Of Green: A Sustainable Approach To Conductive Polymers, Bethany Masten

Undergraduate Review

No abstract provided.