Chemistry Commons^™

Experimental And Simulation Study Of Reactive Silver Ink Droplet Evaporation, Weipeng Zhang

Electronic Thesis and Dissertation Repository

The evaporation of particle-free silver ink droplets on heated substrates directly impacts the morphology of the resultant silver particles and films. In this thesis, COMSOL Multiphysics simulations of the solvent (water-ethylene glycol mixture) droplet evaporation process are used to explain the microflows, mass transfers, and heat distribution responsible for the experimental observations. The reactive ink incorporates fluoro-surfactant FS-31 and poly (acrylamide) (PAM) to suppress the coffee-ring effect that negatively impacts the electrical conductivity. Experiments show that the droplet evaporation process results in varied silver particle morphology, depending on the locations within the droplet, leading to uneven surfaces. Large particles (3 …

Application Of Crystal Engineering In Multicomponent Pharmaceutical Crystals: A Study Of Theory And Practice, Soroush Ahmadi Nasrabadi

Electronic Thesis and Dissertation Repository

Multicomponent crystallization, a prominent strategy in crystal engineering, offers the ability to modify the physicochemical properties of crystals by introducing a secondary component to their lattice structure. Such multicomponent crystals have found widespread application in the pharmaceutical industry. This thesis explores the experimental screening, characterization, application, and theoretical prediction of multicomponent crystals of Active Pharmaceutical Ingredients (APIs).

The first case study investigates a new solvate of Dasatinib which exhibits high instability at room temperature and transforms into a different polymorph upon desolvation. The crystal structure of this compound is obtained, revealing insights into its transient nature and the potential application …

Use Of Electrochemical Techniques And Statistical Analysis To Investigate The Pitting Probability Of Copper, Sina Matin

Electronic Thesis and Dissertation Repository

The development of a safe permanent disposal plan is essential for the long-term disposal of used fuel bundles. Nuclear Waste Management Organization (NWMO) has been investigating the deep geologic disposal of nuclear waste which offers the optimum passive safety system with a negligible probability of release of radionuclides into the environment.

The proposed used fuel containers (UFC) for the permanent disposal of high-level nuclear waste in Canada is comprised of a carbon steel vessel coated with a 3 mm corrosion-resistant copper layer deposited using a combination of electrodeposition and cold spray deposition. Although copper is often considered to be thermodynamically …

Near-Ir Laser Ablation Of Simulated Radiologically Contaminated Oxides On Carbon Steel Feeder Pipes, Thao Viet Do

Electronic Thesis and Dissertation Repository

As nuclear power plants age and retire from service, many countries face significant challenges concerning the safe long-term storage and disposal of large volumes of low and intermediate level radioactive wastes (L&ILW). The volumes of metallic waste are of particular concern, as when metal corrodes it produces hydrogen that could lead to pressure build-up in interim storage and disposal. In Canada, a significant fraction of the metallic wastes for Canada Deuterium Uranium (CANDU) nuclear reactors are out-of-core reactor components, such as carbon steel (CS) feeder pipes. The radioactive contamination is expected to be largely confined to the surface oxide layers …

Development Of Advanced Solid-State Electrolytes And Interfaces For High-Performance Sulfide-Based All-Solid-State Lithium Batteries, Feipeng Zhao

Electronic Thesis and Dissertation Repository

All-solid-state lithium batteries (ASSLBs) have become increasingly attractive due to the demand of high-energy-density and high-safety lithium-ion batteries for electric vehicles (EVs). As the core component of ASSLBs, solid-state electrolytes (SSEs) are regarded as essential to determine the electrochemical performance of ASSLBs. The inorganic SSEs is one of the most important categories in all developed SSEs, representing the advance of superionic lithium conductors as well as the cornerstone to construct flexible polymer/inorganic composite SSEs. The sulfide-based inorganic SSE is one of the most promising SSEs that is receiving a lot of attentions, because only sulfide SSEs can show ultrahigh ionic …

Non-Linear Effects Of Solution Parameters And Gamma Radiation On Nickel Oxidation Dynamics, Razieh Karimihaghighi

Electronic Thesis and Dissertation Repository

Nickel is the main component in nickel-based superalloys which are known for their superior corrosion resistance and mechanical properties. These alloys are used in nuclear power plants, mainly for thin-walled heat exchanger tubing where these materials are exposed to a continuous flux of ionizing radiation. The long-term corrosion behaviour of these alloys at high temperatures and in the presence of gamma-radiation is not well understood. Moreover, the mechanism by which nickel improves the corrosion resistance of these alloys is also not known. Therefore, a mechanistic understanding of the nickel oxidation process is required to develop a predictive corrosion model for …

Electronic And Local Structures Of Pt-Based Bimetallic Alloy And Core-Shell Systems, Jiatang Chen

Electronic Thesis and Dissertation Repository

This thesis investigates the electronic structure of Pt for catalysis applications. The importance of the Pt 5d band is discussed in terms of the bonding capability of Pt. The oxygen reduction reaction in proton exchange membrane fuel cells is chosen as the catalytic reaction model to illustrate the effect of Pt 5d states on Pt-O interaction. Pt-based bimetallic systems are introduced as a solution for the high price and limited resources of Pt. Despite lower usage of Pt, the tuning capability to optimize the Pt 5d band in bimetallic catalysts is supposed to provide superior catalytic activity. Advanced synchrotron X-ray …

Nonlinear Dynamics Of Carbon Steel Corrosion Under Gamma Radiation, Youn Gyeong Shin

Electronic Thesis and Dissertation Repository

Corrosion of materials is still an unresolved problem affecting a multitude of industries. One of the grand challenges facing the corrosion community is the development of high-fidelity models for corrosion in actual service environments. The difficulties arise since corrosion involves transfer of metal atoms between the solid and solution phases thus making the system non-adiabatic. Interfacial transfer of atoms increases the chance of establishing systemic feedback between chemical reactions and transport processes, which results in chemical oscillation and periodic patterns on the corroding surfaces. These oscillating behavior in electrochemical measurements and pattern formation on corroding surfaces have been reported in …

High-Pressure Studies On The Transition From Red Phosphorus To Black Phosphorus, Heng Xiang

Electronic Thesis and Dissertation Repository

Black phosphorus (BP) is a promising material in many research fields. However, the transition process from amorphous red phosphorus (ARP) is elusive and hence hinders large scale synthesis and applications. This work describes the application of the high-pressure method to study the transition process from ARP to BP.

In this thesis, the following three objectives were achieved: (1) to understand the mechanism of the transition, (2) to facilitate the synthesis of BP by taking the advantage of less pure ARP, (3) to propose new methods of synthesizing BP-based materials, such as the moderately oxidized BP and the black phosphorus/ amorphous …

Novel Avenues Toward Controlling The Photophysical Properties Of Ultra-Small Silicon Quantum Dots, Mohammed Abdelhameed

Electronic Thesis and Dissertation Repository

Quantum dots (QDs) have attracted an increasing attention in the last decade over many conventional organic dyes. This is due to their unique optical properties including broad absorption spectra, high photostability, and size-tunable photoluminescence (PL). However, some toxicity concerns associated with traditional quantum dots have hindered their wide applicability. Interestingly, silicon quantum dots (SQDs) have been shown to be more advantageous than most of QDs thanks to their excellent biocompatibility and biodegradability, low cytotoxicity, and versatile surface functionalization capability. Thus, SQDs are promising candidates for various biological and biomedical applications such as bioimaging, biosensing, and photodynamic therapy. Unfortunately, only a …

Progress Toward Durable Icephobic Materials, Matthew J. Coady

Electronic Thesis and Dissertation Repository

Ice accumulation is a major engineering challenge in many fields including aerospace, power generation, transportation, and infrastructure. A variety of solutions are being researched to address this challenge. Perhaps the most promising method of combating ice accumulation is by applying coatings with low values of interfacial ice adhesion strength, τ_ice. Icephobic materials are those with ice adhesion below 100 kPa, and it has been shown that passive delamination can occur on surfaces with τ_ice below 20 kPa. While various low adhesion surfaces have been prepared, durability concerns pervade applications where surfaces experience repeated icing or freeze-thaw cycles, …

Shape-Controlled Nanoparticles As Effective Catalysts For Proton Exchange Membrane (Pem) Fuel Cells, Ali Feizabadi

Electronic Thesis and Dissertation Repository

Polymer electrolyte membrane fuel cell (PEMFC), is considered a promising candidate for the next generation power sources in transportation, stationary and portable applications. However, oxygen reduction reaction (ORR), one of the key reactions occurring on PEMFC is kinetically slow; this has limited performance and further advancement in this kind of fuel cells. Thus, improving the PEMFC efficiency requires a thorough understanding of the ORR mechanism on the desired catalyst. To address the above-mentioned demands, the scope of this thesis is focused on the fundamental understanding of facet-controlled nanoparticles, metal-support interactions, and bimetallic platinum catalysts, utilizing synchrotron-based X-ray absorption, X-ray photoelectron …

Development Of In Situ Forming Hydrogels For Intra-Articular Drug Delivery, Andy Prince

Electronic Thesis and Dissertation Repository

Hydrogels are 3-dimensional crosslinked polymer networks that can absorb significant amounts of water. The physical properties associated with hydrogels affords them resemblance to biological tissues making them good candidates for biomedical applications. Many pharmaceuticals, specifically non-steroidal anti-inflammatory drugs (NSAIDs), have poor aqueous solubility, which limits their bioavailability and efficacy. People suffering from chronic osteoarthritis (OA) are required to frequently take large doses to mitigate pain, which can lead to serious side effects. Hydrogels are good strategies to deliver NSAIDs via articular injection because they can form solid gels in situ. This thesis describes the synthesis, formulation, mechanical testing, in …

Corrosion Dynamics Of Carbon Steel In Used Fuel Container Environments, Dan Guo

Electronic Thesis and Dissertation Repository

The current Canadian used nuclear fuel container (UFC) design uses a pressure‑grade carbon steel (CS) vessel with its outer surface coated with a thin layer of copper. One concern regarding the structural integrity of the UFC design is the potential internal corrosion of the CS vessel. Moisture trapped inside a UFC could condense within the gap between the hemispherical head and the cylindrical body of the vessel. The internal UFC environment will be exposed to a continuous flux of ionizing radiation arising from the decay of radionuclides trapped in the used UO₂ fuel matrix.

This thesis research project investigates …

Plant Stimuli-Responsive Biodegradable Polymers For The Use In Timed Release Fertilizer Coatings, Spencer Heuchan

Electronic Thesis and Dissertation Repository

The use of nitrogen-based fertilizers continues to accelerate with human population growth and increases in global food requirements. Enhanced efficiency fertilizers (EEFs) have been developed to improve the synchronization between nutrient supply and crop nutrient demand. However, many of the current controlled release fertilizers are coated with non-degradable polymers that contribute to accumulation of microplastics within ecosystems. This thesis describes research towards the development of a new class of fertilizer coatings using a self-immolative polymer known as poly (ethyl glyoxylate) (PEtG). PEtG itself does not have suitable properties to produce a viable coating but once blended with another degradable polyester …

Study On The Surface Features Of Preg-Robbing Carbonaceous Matter During Oxidation Treatment, Mana Pourdasht

Electronic Thesis and Dissertation Repository

Carbonaceous gold ores have the ability to adsorb gold (I) cyanide from leach solutions during processing. This phenomenon, known as preg-robbing, is responsible for poor recoveries as the carbonaceous materials of the ore compete with activated carbon used during the leaching and adsorption phase of processing. Chemical oxidation of carbonaceous materials by different reagents has been utilized to investigate and compare the mechanism of Au (CN)₂ adsorption onto carbonaceous materials prior to and following the treatment.

The procedure for characterization of the carbonaceous materials (plain and modified) in the sample combines the use of several analytical techniques and test …

Fabrication And Modification Of Titania Nanotube Arrays For Harvesting Solar Energy And Drug Delivery Applications, Ahmed El Ruby Abdel Rahman Mohamed

Electronic Thesis and Dissertation Repository

The fast diminishing of fossil fuels in the near future, as well as the global warming caused by increasing greenhouse gases have motivated the urgent quest to develop advanced materials as cost-effective photoanodes for solar light harvesting and many other photocatalytic applications. Recently, titania nanotube arrays (TNTAs) fabricated by anodization process has attracted great interest due to their excellent properties such as: high surface area, vertically oriented, highly organized, one-dimensional, nanotubular structure, photoactivity, chemical stability and biocompatibility. This unique combination of excellent properties makes TNTAs an excellent photoanode for solar light harvesting. However, the relatively wide band gap energy of …

Gamma-Radiation Induced Corrosion Of Alloy 800, Mojtaba Momeni

Electronic Thesis and Dissertation Repository

This thesis presents a newly developed mechanism and predictive model for the corrosion of Alloy 800. The Fe-Cr-Ni Alloy (Incoloy 800) is mainly used for steam generator (SG) tubing in CANDU and PWR reactors and is a candidate material for the proposed Canadian Supercritical Water Reactor (SCWR) in which it will be exposed to extreme conditions of high radiation flux and large temperature gradients. The influence of gamma radiation and water chemistry conditions on the corrosion behaviour of Alloy 800 are studied in this work. Ionizing radiation creates reducing (•e_aq^–, •H, •O₂^-) and oxidizing …

Crystal Engineering Of Active Pharmaceutical Ingredients With Low Aqueous Solubility And Bioavailability, Jenna M. Skieneh

Electronic Thesis and Dissertation Repository

Approximately 75% of new molecular entities approved by the Food and Drug Administration (FDA) for use in the pharmaceutical industry are found to have poor aqueous solubility. This undesirable attribute leads to consequences such as higher doses required to reach therapeutic levels, greater vulnerability to food effects, lesser fraction absorbed in the small intestine and damage to the environment due to increased quantity of excretion. The addition of an excipient (i.e. a FDA approved inactive ingredient) to the molecular structure of an active pharmaceutical ingredient (API) through intermolecular bonding is of growing interest because the properties of the API can …

Nanostructured Air Electrodes And Electrochemical Reaction Mechanism Studies For Sodium-Oxygen Batteries, Hossein Yadegari

Electronic Thesis and Dissertation Repository

Alkali metal-O₂ batteries, i.e. Li- and Na-O₂, are considered as the next generation of energy saving technologies with potential application in electric transportation. The high theoretical energy density in these cells is related to the use of high energy alkali metals as negative and oxygen as the positive electrode materials. The performance of alkali metal-O₂ cells is highly dependent on the positive electrode material, where oxygen reduction and evolution reactions take place. Besides, the primary products of oxygen reduction reaction in these cells are typically metal oxides, which are insoluble in nonaqueous electrolytes, resulting in accumulation …

Hydraulic And Electrokinetic Delivery Of Remediants For In-Situ Remediation, Ahmed I. A. Chowdhury

Electronic Thesis and Dissertation Repository

Nano-scale zero valent iron (nZVI) has shown promising mobility and in-situ reactivity with chlorinated volatile organic compounds when injected into saturated porous media. The current study evaluated nZVI mobility and subsequent reactivity with in-situ contaminants in a variably saturated porous media. The nZVI particles, synthesized onsite at subzero temperatures, demonstrated complete trichloroethene (TCE) degradation within the target area. Furthermore, a three dimensional finite difference model (CompSim) was utilized to investigate nZVI mobility in variably saturated zones. Model predicted well head data were in very good agreement with field observations. Simulation results showed that the injected slurry migrated radially outward from …

Mechanism Of Ethanol Partial Oxidation Over Titania Supported Vanadia Catalysts: Geometric And Electronic Structure Consequences On Reaction Kinetics, Dongmin Yun

Electronic Thesis and Dissertation Repository

Supported vanadium oxide catalysts (VO_x) are used for a wide range of industrial processes. A significant amount of research has been carried on this specific system with the aim to identify the critical parameters involved in catalytic activity. The results on this relative large body of research indicate that the catalyst support plays a critical role in determining the catalytic activity of vanadia and the use of titanium dioxide as support renders a catalyst with superior activity. Studies on supported vanadia on titanium oxide (VO_x/TiO₂) have provided an understanding on support interactions that result …

Doped Tio2 Nanowires For Applications In Dye Sensitized Solar Cells And Sacrifical Hydrogen Production, Qasem Alsharari

Electronic Thesis and Dissertation Repository

This thesis explores the synthesis of metal oxide 1-D nanowires using a sol-gel method in supercritical carbon dioxide (sc-CO₂), as an environmental friendly enabling solvent. Porous nanowires were synthesized and their performance was tested in dye sensitized solar cell and sacrifical hydrogen production. Titanium isopropoxide (TIP) was used as a precursor for titania synthesis while copper, bismuth and indium were examined as dopants, respectively. The sol-gel reactions were catalyzed by acetic acid in CO₂ at a temperature of 60 °C and pressure of 5000 psi. It was observed that acetic acid/monomer ratio > 4 produced nanowires while a …

Field Scale Application Of Nanoscale Zero Valent Iron: Mobility, Contaminant Degradation, And Impact On Microbial Communities, Chris M.D. Kocur

Electronic Thesis and Dissertation Repository

This thesis began by verifying that nanoscale zero valent iron (nZVI) synthesis methods could be scaled up and implemented at the field scale in a safe manner. This led to successful demonstration of nZVI injection and mobility under constant head gravity injection into a contaminated utility corridor in Sarnia, Ontario. Where field studies have fallen short in the past was linking the somewhat qualitative field geochemical parameters to other evidence of nZVI transport. Definitive nZVI detection was elusive in previous field studies due to the highly reactive nature of the particles caused by their high surface area. nZVI was detected …

Exploring The Chemistry Of Phosphorus For Photopolymer Applications, Ryan Guterman

Electronic Thesis and Dissertation Repository

Prior to this thesis, phosphorus-containing polymers and photopolymerization represented two distinct, non-overlapping fields of study. This thesis examined the prospect of combining these two approaches to create a system possessing the benefits of both techniques. By exploiting the chemistry of phosphorus, and using photopolymerization as a fabrication method, new materials were developed and assessed for their use in various applications.

Among the many phosphorus compounds that may be used in polymer science, phosphonium salts and primary phosphines were of specific focus. First, highly fluorinated phosphonium monomers were developed to create photopolymerized hydrophobic surfaces. A structure-activity relationship was established, as both …

Production And Applications Of Formaldehyde-Free Phenolic Resins Using 5-Hydroxymethylfurfural Derived From Glucose In-Situ, Yongsheng Zhang

Electronic Thesis and Dissertation Repository

The phenol-formaldehyde (PF) resin manufacturing industry is facing a growing challenge with respect to concerns over human health, due to the use of carcinogenic formaldehyde and sustainability due to the use of petroleum-based phenol in PF resin manufacture. Glucose and its derivative, 5-hydroxymethylfurfural (5-HMF), have proven to be potential substitutes for formaldehyde in the synthesis of phenolic novolac resins.

This thesis investigated a number of glucose and 5-HMF resin systems including the curing of phenol-glucose novolac resin (PG) with a bis-phenol-A type epoxy. The curing process was modeled according to the Sestak-Berggren equation (S, B) using Málek methods. This was …

Poly(Ester Amide) And Poly(Ethyl Glyoxylate) Nanoparticles For Controlled Drug Release, Amira Mohamed Moustafa

Electronic Thesis and Dissertation Repository

The objective of this research was to develop polymeric nanoparticles (NPs) having improved drug release properties for drug delivery. Poly(ester amide)s (PEAs) are promising biodegradable polymers. PEA NPs were prepared via emulsification-evaporation and salting-out methods and optimized through by varying different processing parameters. Polymer-model drug conjugates based on PEAs containing L-aspartic acid and rhodamine B were synthesized and used for NP preparation. Release behavior was studied and compared to a control system with physically encapsulated rhodamine B. It was shown that the release of rhodamine B from the covalent system did not show the burst effect and exhibited a slower …

Scale-Up Methodology For Bench-Scale Slurry Photocatalytic Reactors Using Combined Irradiation And Kinetic Modelling, Patricio J. Valades Pelayo

Electronic Thesis and Dissertation Repository

The present study focuses on developing a predictive methodology to scale-up a slurry annular photoreactor using a TiO₂ Degussa P25 from the bench-scale to a pilot-plant scale. The bench-scale photoreactor is a Photo-CREC-Water II, a 2.65 L internally-irradiated slurry annular photocatalytic reactor. The pilot-plant scale photoreactor is a Photo-CREC Water Solar Simulator, a 9.8 L pilot-plant photoreactor, externally irradiated by eight lamps.

The adopted methodology allows the independent validation of radiative and kinetic models avoiding cross-correlation issues. The proposed approach involves two Monte Carlo methods, to model the Radiative Transfer Equation (RTE) inside each photoreactor. With this end, a …

Diffusion And Adsorption Coefficients Of Aromatic Hydrocarbons In Gas Chromatography Capillary Columns, Gabriela Navarro Tovar

Electronic Thesis and Dissertation Repository

This study focuses on a mathematical description of aromatic species elution peaks from a gas chromatographic BPX5 capillary column. Using the chromatographic peaks, statistical moments are calculated for toluene, naphthalene, phenol and 2-naphthol. This thesis reports two modelling approaches involving laminar gas flow, distribution coefficients (K_s) and diffusion coefficients in the stationary phase (D_s).

Firstly, a model with equilibrium adsorption is considered to describe symmetric peaks for toluene and naphthalene. Moreover, a model with non-equilibrium adsorption is proposed to describe asymmetric peaks of phenol and 2-napthol. In addition to the K_s and D …

Surface Functionalization And Bioconjugation Of Nanoparticles For Biomedical Applications, Longyan Chen

Electronic Thesis and Dissertation Repository

Colloidal inorganic nanoparticles (NPs) have been attracting considerable interest in biomedicine, from drug and gene delivery to imaging, sensing and diagnostics. It is essential to modify the surface of nanoparticles to have enhanced biocompatibility and functionality for the in vitro and in vivo applications, especially in delivering locally and recognizing biomolecules. Herein, the goal of this research work is to develop advanced NPs with well-tailored surface functionalities and/or bio-functionality for the applications in cell tracking and analytes detection.

In the first project, quantum dots incorporating with gelatin nanoparticles (QDs-GNPs) have been developed for bioimaging applications. Two different approaches have been …