Chemistry Commons^™

Material Formulation And Process Optimization Towards Fabricating Robust 3d Printed Structures, Austin Riggins

Doctoral Dissertations

This dissertation focuses on understanding and addressing the fundamental physicochemical phenomena that lead to weak interfaces and structural warpage in material extrusion 3D printing. Polymeric feedstocks used for this manufacturing technique were manipulated through the incorporation of additives that alter the dynamics of the matrix during and after printing. In Chapter II, adhesion between layers of structures printed from PEEK was strengthened through a combination of low-molecular weight additive incorporation and post-printing thermal annealing. Chapter III reports a method for decreasing the irreversible thermal strain of structures printed from poly(lactic acid) by introducing nanographene and photoinitiator additives into the feedstock …

Integration Of Raman Spectroscopy And Python-Based Data Analysis For Advancing Neurobiological Research, Natalie E. Dunn

Doctoral Dissertations

The field of Raman spectroscopy continues to expand into biological applications due to its usefulness as a non-invasive technique that can be utilized qualitatively and quantitatively. However, the inherent weakness of Raman scattering leads to the need for each collected spectra to undergo a preprocessing step to remove noise, background drift, and cosmic rays. Biological research in particular needs large datasets due to the increased variability in samples. As datasets grow, the need to perform preprocessing on each individual spectra becomes daunting. Often, these steps are done by hand with the help of specialized software programs. Preprocessing can be accelerated …

Synthesis Of Block Copolymer Additives For Examining Phase Morphology And Improving Mechanical Properties Of Thermoplastics Elastomers., Bishal Upadhyay

Masters Theses

Polystyrene-block-poly(1,4-butaidene)-block-polystyrene (PS-PB-PS) triblock copolymers are one of the most widely studied thermoplastic elastomers (TPEs) due to their ease of synthesis, non-polar nature, and commercial applicability. Like many block copolymers, incompatibility between PS and PB causes these TPEs to undergo microphase segregation. Many studies have examined the mechanical properties of blends of TPEs and PS homopolymer additives. However, there have been few studies focused on understanding the morphology and mechanical properties of blends of TPEs and copolymer additives with different architectures. Herein, I describe the synthesis of linear and graft copolymer additives based on the random copolymers poly(methyl methacrylate-random-cyclohexyl methacrylate) (PrC). …

The Influence Of Ion-Ion Correlations On Conductivity In Concentrated Ionic Systems, Md Dipu Ahmed

Masters Theses

This study delves into the fascinating realm of concentrated ionic systems, such as ionic liquids, superionic materials, organic ionic plastic crystals, and polyelectrolytes, which hold immense potential for energy storage applications. The focus is on understanding the intricate role of ionic correlations in shaping their ionic conductivity behavior. These correlations can either boost or impede conductivity, yet their underlying mechanisms remain elusive. Through extensive investigation of various materials, including ionic liquids with differing anionic masses, pure organic ionic plastic crystals, and doped systems, this research employs advanced techniques like dielectric spectroscopy and innovative momentum conservation models to quantify these correlations. …

Dinitrogen Functionalization Using A Molybdenum Atom: Bridging The Gap Between Small And Coordination Complexes Via Quantum Mechanical Methods, Maria Virginia White

Doctoral Dissertations

Chemistry devotes a significant amount of its research to understanding small molecule activation from an electronic structure perspective to help with the investigation of the reaction pathways of catalytically active substances that can promote biomimetic catalysis. A large portion of the energy used annually in our planet is used for the artificial nitrogen fixation (Haber-Bosch process), which renders dinitrogen activation a subject of study. Molybdenum, a fourth row transitional metal, has demonstrated its effectiveness as an essential component of the dinitrogen reduction catalytic process. To better understand the multiple dinitrogen molybdenum binding modes, the work described herein combines wave function …

Theoretical Studies Of Adsorption And Reactivity At The Gas-Solid Interface, Carson J. Mize

Doctoral Dissertations

Catalytic transformations of small molecules is of great interest for both laboratory and industrial practices. Two specific transformations are ethylene to ethylene oxide and combinations of azides and alkenes into aziridine molecules. Ethylene oxide is an epoxide used as a feed-stock for many bulk reactions and commercial products such as antifreeze and various sterilization techniques, while molecules with the aziridine functional group are used for many ring opening and closing techniques as well as in pharmaceuticals and other drug treatments. For production of ethylene oxide, the combination of oxygen adsorbed onto a silver crystal is the known catalysts for thus …

Chirality, Symmetry-Breaking, And Chemical Substitution In Multiferroics, Kiman Park

Doctoral Dissertations

Multiferroic materials attract significant attention due to their potential utility in a broad range of device applications. The inclusion of heavy metal centers in these materials enhances their magnetoelectric properties, yielding fascinating physical phenomena such as the Dzyaloshinskii–Moriya interaction, nonreciprocal directional dichroism, enhancement of spin-phonon coupling, and spin-orbit-entangled ground states. This dissertation provides a comprehensive survey of magnetoelectric multiferroics containing heavy metal centers and explores spectroscopic techniques under extreme conditions. A microscopic examination of phase transitions, symmetry-breaking, and structure-property relationships enhances the fundamental understanding of coupling mechanisms.

In A2Mo3O8 (A = Fe, Zn, Ni, and Mn), we use optical spectroscopy …

Comprehensive Studies Of Magnetic Properties Of Metal-Organic Frameworks And Molecular Compounds, Pagnareach Tin

Doctoral Dissertations

Single-ion magnets (SIMs) are at the forefront of molecular electronic spin magnets with potential applications in magnetic memory storage devices. However, the magnetic properties of the SIMs are yet to be completely understood, especially the magnetic properties of large anisotropy systems. A part of this dissertation is to utilize optical and neutron spectroscopies such as far-IR magneto-spectroscopy (FIRMS) and inelastic neutron scattering (INS) to quantify the anisotropy and study the phonon properties of the SIMs as two-dimensional (2-D) metal-organic frameworks (MOFs) or coordination polymer (CP), and a molecular magnet. In addition, ab initio calculations are used to understand the origin …

Expression And Purification Of Polyketide Synthase Domains To Investigate Protein-Protein Interactions In Polyketide Biosynthetic Pathways, Mujeeb Adeyinka Wakeel

Masters Theses

Polyketide synthases (PKSs) are multienzyme proteins catalyzing the production of the polyketide class of natural products with vast structural diversity. Type II PKSs catalyze polyketide biosynthesis using discrete (standalone) enzymes (domains), while type I PKSs use covalently linked enzymes arranged in a module to catalyze polyketide production. It is hypothesized that type II PKSs are the precursors to type I PKSs, proposing that the genes encoding individual discrete enzymes in type II PKSs fused to give the multienzyme modules of type I PKSs. We reasoned that the intramolecular-like reactions occurring in type I PKS modules might be a driving force …

Redox-Active Polymerization Catalysts And Their Applications, Nicholas M. Shawver

Masters Theses

Traditional catalyst systems are reliable means to produce polymers with well-defined architectures and thermomechanical properties; however, they are often limited by a narrow monomer scope and their ability access few, if any, advanced polymer architectures. To address this limitation, a new class of catalysts have recently emerged that feature redox-active moieties that may access advanced architectures through catalyst electronic modulation that arises from redox events occurring on the ligand scaffold or at the active metal center itself. For example, researchers have explored the ability of redox-active catalysts to impart “on-off” kinetic control during ring-opening polymerizations and their ability to access …

Synthesizing, Purifying, And Characterizing Molten Chloride Salts, Phillip W. Halstenberg

Doctoral Dissertations

Molten chloride salts have vast potential as heat transfer fluids with both nuclear and concentrated solar power applications. For application in energy systems, the characteristics that govern these systems must be well understood. This work focuses on inorganic molten chloride salts with a special emphasis on the experimental aspect of chemical research. Chapter 2 covers the synthetic approaches for the formation of molten chloride mixtures. Many salts can be purchased from industrial suppliers, but most must be purified therefore, Chapter 3 evaluates various methodology developed for removal of impurities in salt mixtures. Once the salt of proper content and purity …

Mechanochemical Synthesis Of Task-Specific Conjugated Porous Networks Towards Enhanced Energy Storage, Juntian Fan

Doctoral Dissertations

Conjugated scaffolds with high electronic conductivity, high surface area, etc. are promising materials for diverse technological applications, especially in the electrochemical field. However, the current synthesis methods are still limited to the traditional solution-based method or the ionothermal method, which always require an inert atmosphere shield, large amounts of organic solvents, noble catalysts, long reaction time up to days, and high temperatures, etc. Therefore, there is a common goal of developing conjugated scaffolds through facile, green, straightforward pathways. Mechanochemistry, which is an efficient, sustainable, solvent-free methodology, could provide a unique reaction environment to synthesize this kind of functionalized materials, resulting …

Utilizing Ultra-Performance Chromatography High-Resolution Mass Spectrometry To Investigate Fatty Acid Mediated Antibiotic Tolerance, Brittni Woodall

Doctoral Dissertations

The lipid membrane is the first component necessary to sustain life. To maintain homeostasis, segregate cellular machinery, provide protection from the environment, and reproduce, an organism must establish a boundary in which the processes can occur. Throughout the last two decades, research has propelled our knowledge of lipid membranes much beyond original hypotheses. Once thought of to be static and uniform, the understanding of the lipid membrane has evolved to encompass a structure that is responsive, unique, and intricately constructed by the organism itself. By chance or by choice, organisms adapt the lipid membrane according to the environment for which …

The Novel Chlorination Of Zirconium Metal And Its Application To A Recycling Protocol For Zircaloy Cladding From Spent Nuclear Fuel Rods, Breanna K. Vestal

Doctoral Dissertations

A novel protocol has been developed for the chemical removal of zirconium alloy (Zircaloy) cladding from spent nuclear fuel rods and subsequent isolation and purification of nuclear-grade zirconium chloride derived therefrom. This protocol is based on the chemistry developed from two new scientific findings.

First, two new oxidative chlorination reactions have been discovered for zirconium metal. In both solvents, zirconium can be quantitatively chlorinated at temperatures less than 150°C, with the operative equations seen below. In sulfur monochloride, the reaction is completed in 2 – 4 hours via surface etching, exhibiting 0^th order kinetic behavior. The elemental sulfur byproduct …

The Development Of Tailored Amphiphilic Copolymers For Detergent-Free Integral Membrane Protein Extraction, Cameron Edward Workman

Doctoral Dissertations

Integral membrane proteins are prolific targets for the design, development, and delivery of pharmaceuticals. In fact, over 60% of all currently available drugs target these proteins to accomplish their therapeutic effect. However, integral membrane proteins remain the least characterized class of all proteins, accounting for only ~2% of all solved protein structures. One of the primary reasons for this low number of solved protein structures is that many membrane proteins lose their native conformation when extracted using conventional methods (e.g. detergents), convoluting accurate structure determination. In contrast, amphiphilic styrene-maleic acid copolymers (SMAs) were recently discovered to readily isolate membrane proteins …

Development Of Artificial Lipids For Metal Ion-Responsive Liposomes And Related Medicinal Applications, Ruhani Sagar

Doctoral Dissertations

Liposomes are synthetic vesicles made of phospholipids that are effective for wide-ranging applications in drug delivery and studying biological membranes. Understanding and controlling membrane properties such as fluidity and permeability is crucial for designing liposomes for specific biomedical applications. Pathological changes in these properties can also help us gain insights into disease mechanisms and develop effective treatments. In this dissertation, we describe the design, synthesis, and study of several lipid analogs for a range of applications including liposome triggered cargo release and therapeutic treatment related to lipids.

In Chapters 2-3, we developed smart liposome platforms that can respond to changes …

Probing Gas Transport Structure-Property Relationships In Vinyl-Addition Polynorbornenes, Trevor Jonas Wilson

Doctoral Dissertations

Polynorbornenes are ideal materials for systematic structure-property investigations designed to correlate gas-transport properties to polymer structure. The modular nature of norbornene-derived systems provides a facile route towards the synthesis of diverse polymeric materials, whose structure may be systematically altered through targeted design of monomers, alterations in polymerization mechanism, or some combination of these two strategies. Though many valuable correlations between gas-permeability and polynorbornene structure have been summarized in prior literature, many of these efforts have focused on homopolymer materials with structural changes imposed — almost exclusively — through modifications in substituent chemistry, or through targeted modulation of molar ratios in …

Development Of Surface-Modified Liposomes For Drug Delivery Applications, Megan Louise Qualls

Doctoral Dissertations

Liposomes are spherical vesicles composed of a lipid bilayer membrane that assembles around an internal aqueous core. This duality gives liposomes the ability to encapsulate both hydrophobic cargo within the lipid bilayer and hydrophilic cargo in the aqueous core, making them versatile molecular carriers for drug delivery. Liposome platforms have many advantages and are promising drug delivery carriers, and research is ongoing to improve their designs for continued clinical applications. Many liposome types have been developed, but further work is needed to improve surface modification, site-specific targeting, and triggered cargo release in order to further the therapeutic applications of these …

Understanding The Polymerization Of Ethyl Cyanoacrylate In The Superglue Fuming Of Latent Prints To Optimize Print Retrieval, Leondra Shawntae Lawson

Masters Theses

The cyanoacrylate fuming method (CFM) is a widespread process used in forensics to make latent prints visible for detection, acquisition, and analysis. CFM is governed by the reaction of ethyl cyanoacrylate (ECA) with biological components in fingerprints, which serve as initiators for this anionic polymerization. CFM is not a well-controlled polymerization and there are different outcomes that may result from lower temperature, one of which fits the generalization of creating more ion-pair initiators. Another effect could be minimizing termination through suppressing side reactions. Alternatively, when paired with humidity, lower temperatures may cause surface condensation, decreasing the quality of the print. …

Impact Of Cover Crop Species Diversity On Soil Nutrient Availability And Crop Productivity, Amanda Kramer

Masters Theses

Cover crops provide multiple environmental benefits that improve both soil and water quality; however, farmers only utilize them on approximately 5% of harvested U.S. cropland. Low adoption rates are attributed to yield impact concerns, seed and planting costs, and lack of advocacy. This study, which began in October 2019, assessed the effects of nitrogen rate and cover crop diversity on weed biomass, soil coverage, in-situ residue decomposition, soil nitrogen and phosphorus availability, and cash crop yield to better understand the costs and benefits of cover crop adoption at two locations in Tennessee (Milan and Spring Hill). Treatments were replicated 4 …

Development And Study Of Small Database For The Activation Of Nitrous Oxide Towards Formation Of Iron(Iv)-Oxo Species, Tobias Barthalomew Robertson

Masters Theses

Nitrous oxide (N₂O) can undergo an oxygen atom transfer (OAT) reaction resulting in inert nitrogen gas (N₂O) while transferring an oxygen atom to a molecular complex or material. This process is of catalytic importance since this OAT reaction can be leveraged to form iron(IV)-oxo sites, which are known to be catalytic intermediates. Here, an investigation of the ligand field effects on primarily iron(II) complexes for the formation of iron(IV)-oxo sites with nitrous oxide as the oxidant is reported. An initial database of sixty-four molecular complexes with ligand environments varying in field strength and coordination geometry was …

Anxiety-Like Behavior In C57bl/6j Mice Is Sexually Dimorphic And Altered By Buprenorphine, Ohm Sharma

Chancellor’s Honors Program Projects

No abstract provided.