Chemistry Commons^™

Characterization Of Deposited Copper Oxide Films On Copper Substrates, Millicent Castillo

Electronic Thesis and Dissertation Repository

The deposition of copper oxide films on copper substrates was investigated by the electrochemical, thermal, and hydrothermal oxidation of copper. The formed oxides were characterized using various surface analytical techniques to determine the film’s morphology, composition, and thickness. The results show that by growing oxides electrochemically, a duplex layer composing of CuO and Cu₂O film was formed on the copper surface, having characteristics of being porous and possessing needle-like structures. An oxide film composed of CuO and Cu₂O, which shows minimal porosity and possess mixtures of crystalline and non-crystalline structures, is formed on the copper surface …

Surface Modification Of Carbon-Based Electrodes For Electrochemical Conversion Processes: Oxygen Reduction Reaction And Bicarbonate Conversion, Udari Shyamika Kodithuwakku Arachchige

Theses and Dissertations--Chemistry

Oxygen reduction reaction (ORR) and conversion of bicarbonate into value-added chemicals are two significant electrochemical processes for energy storage and conversion. ORR is an important electrochemical reaction in fuel cells and metal-air batteries that provide power conversion and storage capacity, respectively, for portable electronics, and electric vehicles. However, the performance of catalysts (e.g., platinum-based) is critically limited by slow kinetics, inefficient four-electron pathway, and surface deactivation. This limited performance of platinum-based catalysts, the scarcity of platinum, and vulnerable supply chains for critical minerals require the development of alternative electrocatalysts now more than ever. Carbon-based materials possess several key properties that …

Effects Of Gamma-Radiation On The Evolution Of Copper Corrosion Dynamics In Deep Geological Repository Solution Environments, Lindsay J. Grandy

Electronic Thesis and Dissertation Repository

The Canadian plan for permanent disposal of used nuclear fuel involves a used fuel container (UFC), a carbon steel vessel with a copper coating to provide the corrosion protection. The corrosion conditions for the copper layer of the UFC are expected to involve small, stagnant water volumes, pH values between 6 and 9, and a continuous flux of γ-radiation emitted from the radionuclides trapped in the fuel matrix. While γ-radiation does not affect the copper metal directly, humid air and water will radiolytically decompose into redox-active and acidic species which will be produced at constant concentrations and can alter the …

Copper Corrosion Dynamics Under Deep Geologic Repository Conditions, Masoumeh Naghizadeh

Electronic Thesis and Dissertation Repository

Canada’s plan for the permanent disposal of spent nuclear fuel involves a multiple-barrier system contained within a deep geologic repository (DGR). The key engineered barrier is the used fuel container (UFC), which is a copper-coated carbon steel vessel. The environments to which the copper coating will be exposed in the DGR are very different from those commonly encountered in copper corrosion studies. The copper (Cu) will be in contact with thin stagnant layers of water, and the corrosion system will be exposed to a continuous flux of γ-radiation. In the presence of γ-radiation, water and humid air decompose to redox-active …

Galvanic Corrosion Of Carbon Steel Coupled To Copper In Used Nuclear Fuel Containers, Lindsay J. Braithwaite

Electronic Thesis and Dissertation Repository

Deep geological containment of used nuclear fuel will rely on multiple engineered and natural barriers, two of which are the copper-coated used fuel containers and the compacted bentonite clay buffer boxes in which the containers will rest. This work focused on possible galvanic interactions between the copper coating and the steel substrate of the container, which may occur at a hypothetical through-coating defect. In the presence of various amounts of chloride, bentonite, and oxygen, corrosion of the copper/carbon steel couple was studied using electrochemical tests complemented by surface characterization and 3D X-ray imaging. We investigated the effects of copper-to-steel area …

The Electrochemical And Corrosion Study Of Copper For Nuclear Waste Containers Under Deep Geological Disposal Conditions, Mengnan Guo

Electronic Thesis and Dissertation Repository

The proposed method for the safe disposal of Swedish, Finnish, and Canadian high-level nuclear waste (HLNW) is to isolate it in iron or steel containers with an outer copper (Cu) shell or coating and bury it in a deep geological repository (DGR). Copper has been selected as the corrosion barrier due to its stability in the aqueous anoxic environments anticipated in DGR conditions. The container will initially be exposed to humid aerated conditions which will evolve to cool and anoxic as radiation fields in the fuel decay and heat production ceases. When the DGR is cool and anoxic, sulphide (SH …

Structure, Surface, And Interfacial Modifications Of Carbon And Supported-Metal Electrodes For Electrochemical Carbon Dioxide Conversion, Namal Wanninayake

Theses and Dissertations--Chemistry

Currently, the global emission of greenhouse CO₂ is over 36 billion tons per year. Consequently, the atmosphere's CO₂ concentrations have exceeded 400 ppm, which is the highest reported in the last three million years. The accumulation of CO₂ is the most critical origin for today's climate change; thus, closing the carbon cycle is vital to reverse the detrimental impacts of climate change. Under this goal, the electrochemical reduction of CO₂ into commodity fuels and chemicals via renewable energy is one of the most promising strategies to recycle CO₂. Despite significant progress made in electrocatalysis, …

Galvanic Corrosion Of Copper-Coated Carbon Steel For Used Nuclear Fuel Containers, Thalia E. Standish

Electronic Thesis and Dissertation Repository

Carbon steel vessels coated with ∼3 mm of Cu have been proposed for the permanent disposal of used nuclear fuel in a deep geological repository (DGR) in Canada. In the event of an undetected defect in the Cu coating that exposes the steel substrate, galvanically accelerated corrosion of steel is, in principle, possible. To investigate this scenario, the progression of steel corrosion at the base of novel simulated through-coating defects was monitored electrochemically and imaged non-destructively using X-ray micro-computed tomography (micro-CT) as a function of time, O₂ availability (including anoxic conditions), and coating method (cold spray deposition (with and …

Electrochemical And Corrosion Examination Of Copper Under Deep Geologic Conditions For The Application Of Nuclear Waste Containers, Taylor L. Martino

Electronic Thesis and Dissertation Repository

Copper is the selected material for the fabrication of nuclear fuel waste containers in Sweden, Finland and Canada due to its corrosion resistance in the anoxic aqueous environments, anticipated in deep geological repositories. A potential oxidant for copper is bisulphide produced either by the dissolution of minerals or by sulphate-reducing bacteria. The primary goals of this thesis were to determine the mechanism of corrosion of copper in bisulphide environments and to investigate the chemistry of the bentonite porewater that will ultimately be in contact with the copper container.

The mechanism of sulphide film growth and the details of copper corrosion …

Application Of Lipid Styryl Dye For Staining Intracytoplasmic Membranes In Gram-Negative Bacteria, Theodore J. Hammer

Williams Honors College, Honors Research Projects

Intracytoplasmic membranes are structures that form within cells which help facilitate a variety of different metabolic processes. This feature of intracellular membranes makes them particularly valuable for studying compartmentalization and cell dynamics in bacteria. In the past, transmission electron microscopy has been the primary method for imaging bacteria with intracytoplasmic membranes. Because transmission electron microscopy takes images of a cell in fixed slices, it’s impossible to follow a cell’s growth and development over time. Fluorescence microscopy is a particularly effective method of measurement that can combat these issues when evaluating live bacterial cells. Here, standard biochemical laboratory procedures were used …