Chemistry Commons^™

A Modeling Study For The Implementation Of In Situ Cometabolic Bioremediation Of Trichloroethylene-Contaminated Groundwater., John A. Christ

Theses and Dissertations

The limitations of conventional groundwater remediation technologies have led to the development of innovative technologies which may achieve national hazardous waste site remediation goals. Before an innovative technology can be implemented in the field, remedial project managers, regulators and other stakeholders require adequate modeling tools to help assess the applicability of the technology at a particular site. This modeling study investigates how an innovative technology, in situ cometabolic bioremediation, might be implemented to remediate a TCE-contaminated site, under different site conditions. A steady-state model is developed which couples an analytical expression to simulate the effect of flow between multiple pumping …

Evaluation Of The Natural Biodegradation Of Aircraft Deicing Fluid Components In Soils, Laura M. Johnson

Theses and Dissertations

This research effort was conducted to analyze the biodegradation of propylene glycol (PG) and tolyltriazole in two different soil types; a sandy soil and a high clay soil. Both an automated respirometer and a high performance liquid chromatograph (H PLO) were used in the analysis. Two separate experiments were conducted. In the first experiment, one level of tolyltriazole was added to the soils to determine whether or not there was a difference in the biodegradation rates of tolyltriazole in the two soils. The respirometer results indicated that there was a significant difference between the respiration rates of the microorganisms in …

Correlation Of Dynamic Dielectric Properties To Reaction Kinetics And Changing Mechanical Properties Of Epoxy Resins During Cure, Yunfei Wang

Dissertations, Theses, and Masters Projects

The principal objective of this paper is to describe how complex impedance, obtained from frequency dependent dielectric sensing technique, can be used as an effective diagnostic tool for in situ real-time investigation in the fabrication of thermoset structures.;Two epoxy systems (Pr500 from 3M and My720 from Ciba Geigy) with different functionality are characterized in terms of their dielectric, thermal, and rheological behavior. It is observed that there is a one to one relationship between Tg and conversion which is independent of cure temperature. The chemical kinetics of the reaction is satisfactorily described by an autocatalyzed reaction mechanism. The chemical rate …

The Synthesis Of Reflective And Electrically Conductive Polyimide Films Via An In Situ Self-Metallization Procedure Using Silver(I) Complexes, Robin Elaine Southward

Dissertations, Theses, and Masters Projects

Optically reflective polyimide films have been prepared by the incorporation of silver(I) acetate and a {dollar}\beta{dollar}-diketone solubilizing agent, hexafluoroacetylacetone (HFAH), into a dimethylacetamide solution of the poly(amic acid) formed from {dollar}3,3\sp\prime,4,4\sp\prime{dollar}-benzophenonetetracarboxylic acid dianhydride (BTDA) and {dollar}4,4\sp\prime{dollar}-oxydianiline {dollar}(4,4\sp\prime{dollar}-ODA). Optically reflective and conductive polyimide films have been prepared by replacing the {dollar}\beta{dollar}-diketone (HFAH), with the less substituted {dollar}\beta{dollar}-diketone, trifluoroacetylacetone (TFAH). The former system has been both cast directly from the poly(amic acid) resin and cast from the poly(amic acid) resin onto a fully imidized {dollar}\rm BTDA/4,4\sp\prime{dollar}-ODA base (forming a metallized topcoat). Thermal curing of the silver(I)-containing poly(amic acid) leads to imidization with …

Characterization Of Epoxy-Amine Systems And Nylon-11 And Pvdf Degradation, Wendy Raquel Mahler

Dissertations, Theses, and Masters Projects

No abstract provided.

The Influence Of Microstructure On The Thermal Degradation Behavior Of Poly(Vinyl Chloride), Hoang Vi Tran

Dissertations, Theses, and Masters Projects

No abstract provided.

The Synthesis, Characterization, And Molecular Modeling Of Cyclic Arylene Ether Oligomers, Sheeba Ahmed

Dissertations, Theses, and Masters Projects

Cyclophanes are a family of bridged cyclic aromatic compounds that have found extensive applications in host-guest chemistry, molecular recognition, biomimetics and most recently as precursors in ring-opening polymerizations.;This research presents the synthesis of several novel cyclic arylene ether oligomers, based on 1,3-bis(4-fluorobenzoyl) benzene and 3,3{dollar}\sp\prime{dollar}-methylene diphenol and 3,3{dollar}\sp\prime{dollar}-(ethylene dioxy) diphenol, and their characterization by LC-MS/MS, 1-D {dollar}\sp1{dollar}H-NMR and x-ray crystallography. Electrospray ionization (ES) along with MS/MS was used to characterize cyclic oligomers of molecular weight up to 1600 Da. The thermal properties of these cyclic oligomers were studied by differential scanning calorimetery (DSC) and thermal gravimetric analysis (TGA).;These cyclic oligomers …

The Thermal Cure Of Phenylethynyl-Terminated Polyimides And Selected Model Compounds, Karen H. Wood

Dissertations, Theses, and Masters Projects

The ability to process high performance polymers into useful adhesives and high quality composites has been significantly advanced by synthetic techniques in which oligomers terminated with reactive groups cure or crosslink at elevated temperature after the article has been fabricated. Several matrix resin systems of considerable interest to the aerospace community utilize phenylethynyl terminated imide (PETI) technology developed at the Langley Research Center to achieve this advantage. This work addresses the cure chemistry of PETI oligomers.;The thermal cure of selected oligomers and model compounds was studied using a variety of analytical techniques including differential scanning calorimetry, high pressure liquid chromatography, …

The Promotion Of Poly(Methyl Methacrylate) Depolymerization By Metal-Based Initiators, Jason Andrew Macko

Dissertations, Theses, and Masters Projects

No abstract provided.

Characterization Of Iron Oxides And Atmospheric Corrosion Of Steel, Sei Jin Oh

Physics Theses & Dissertations

The study of corrosion behavior was performed using three different analytical techniques, which provided information on the formation, development and layering of iron oxides on the corrosion products as a function of atmospheric conditions, exposure time and type of steel. In particular, the protective layer formed on weathering steel was investigated as a function of different amounts of alloying elements in the steel, atmospheric conditions and exposure times. Combined together, the results provided a better understanding of the atmospheric corrosion behavior of steel, and formed a part of database of the atmospheric corrosion characteristics.

Accurate characterization of the iron oxides …