Open Access. Powered by Scholars. Published by Universities.®
- Keyword
-
- Nanostructured materials (6)
- Nanobiotechnology (5)
- Thin films (4)
- Adsorption (3)
- Oligonucleotides (3)
-
- Biomimetic materials (2)
- Biosensors (2)
- Chemistry (2)
- DNA (2)
- Energy transfer (2)
- Extreme ultraviolet lithography (2)
- Gold nanoparticles (2)
- Ligands (2)
- Lithography (2)
- Nanoparticle (2)
- Nanoparticles (2)
- Nucleic acids (2)
- Organometallic compounds (2)
- Photoresist (2)
- Photoresists (2)
- Proton exchange membrane fuel cells (2)
- RNA (2)
- Resist (2)
- Adhesion Energy (1)
- Adsorbate (1)
- Alkahest (1)
- Amine (1)
- Amine oxidase (1)
- Antenna effect (1)
- Array (1)
Articles 1 - 26 of 26
Full-Text Articles in Chemistry
Characterization Of An Amine-Thiol Cosolvent System : Ethylenediamine And Mercaptoethanol, Fernanda Giongo Fernandes
Characterization Of An Amine-Thiol Cosolvent System : Ethylenediamine And Mercaptoethanol, Fernanda Giongo Fernandes
Legacy Theses & Dissertations (2009 - 2024)
Since its introduction, the amine-thiol cosolvent system has been successfully utilized for the deposition of various thin-film devices, but its mechanism of action is still uncertain. Herein, we have attempted to dissect some of the chemical characteristics of amine-thiol cosolvents, with a special interest taken towards a mixture of ethylenediamine (en) and mercaptoethanol (ME). Conductivity was measured for multiple amine-thiol combinations at different ratios to determine extent of ionization in solution, with en-ME having one of the highest solution conductivities. Exposing the solution to air for several days was found to decrease the conductivity of en-ME, indicating the formation of …
Uio-Type Metal-Organic Framework Derivatives As Sorbents For The Detection Of Gas-Phase Explosives, Matthew Ryan Sherrill
Uio-Type Metal-Organic Framework Derivatives As Sorbents For The Detection Of Gas-Phase Explosives, Matthew Ryan Sherrill
Legacy Theses & Dissertations (2009 - 2024)
The detection of energetic compounds – better known to the public as explosives – has is an important cornerstone of counterterrorism and homeland security . While significant advances have been achieved for the detection of trace explosives in various matrices such as soil, wastewater, and clothing, the detection of explosives in the gas phase remains challenging due to their infamously low vapor pressures. In this thesis, we leverage the high sensitivity of direct analysis in real-time mass spectrometry (DART-MS) and the microporosity of metal-organic frameworks (MOFs) to adsorb and therefore concentrate explosives from the vapor phase and subsequently detect them …
Development Of Chemical Methods For Oligonucleotide Purification, Paramagnetic Labeling And Synthesis Of Dna-Based Advanced Materials, Muhan He
Legacy Theses & Dissertations (2009 - 2024)
This thesis describes a chemical method for alternative oligonucleotide purification that is non-chromatographic and gel-free and allows to routinely synthesize and purify long functional RNA strands. The purification of long RNAs is based on the bio-orthogonal inverse electron demand Diels-Alder (IEDDA) chemistry between trans-cyclooctene (TCO) and tetrazine (Tz). Target oligonucleotide strands are selectively tagged with Tz and can be captured and purified from the failure sequences with immobilized TCO. RNA strands are synthesized on solid support through a photolabile linker to avoid the loss of Tz tag. Purity of the isolated oligonucleotides was evaluated using gel electrophoresis, HPLC and mass …
Development Of Dual Functional Dna/Rna Nanostructures For Drug Delivery, Vibhav Amit Valsangkar
Development Of Dual Functional Dna/Rna Nanostructures For Drug Delivery, Vibhav Amit Valsangkar
Legacy Theses & Dissertations (2009 - 2024)
In addition to the traditional biochemical functions, DNA and RNA have been increasingly studied as building blocks for the formation of various 2D and 3D nanostructures. DNA has emerged as a versatile building block for programmable self-assembly. DNA-based nanostructures have been widely applied in biosensing, bioimaging, drug delivery, molecular computation and macromolecular scaffolding. A variety of strategies have been developed to functionalize these nanostructures. The major advantage is that DNA is a very stable molecule and its base-pairing properties can be easily utilized to control and program the formation of desired nanostructures. In addition, some of these DNA/RNA nanostructures have …
Towards Machine Learning In Chemical Sensing : Milk Differentiation And Quality Control Through Two-Dimensional Nano-Sensor Array, Yu Sheng Chen
Towards Machine Learning In Chemical Sensing : Milk Differentiation And Quality Control Through Two-Dimensional Nano-Sensor Array, Yu Sheng Chen
Legacy Theses & Dissertations (2009 - 2024)
Herein, we developed a novel artificial tongue using machine learning and 12 nanoassemblies (2D-NAs) to identify and analyzed different kinds of milk beverages for quality control. This biomimetic sensor array was trained to “taste” different milk types as an “artificial tongue” which is the first time we demonstrated that this sensor array can be implemented to complex systems. Two-dimensional nanoparticles (2D-nps) and nine fluorescently labeled single stranded oligonucleotides (ssDNA) with different length and nucleobases were assembled to create 12 2D-NAs. The artificial tongue was deployed to identify and analyze five milk types. All five milk types were discriminated with 95% …
Synthesis And Adsorption Experiments With Metal-Organic Frameworks For High School And Undergraduate Laboratory Settings, Kate Holley
Legacy Theses & Dissertations (2009 - 2024)
Seven experiments are described and outlined here that introduce high school and undergraduate students to metal–organic frameworks (MOFs) and their applications. The experiments were designed to be completed with basic laboratory equipment and supplies and without the use of expensive characterization instruments, simulating typical high school chemistry laboratory conditions. Students synthesized two well-known MOFs, HKUST-1 and aluminum fumarate, using simple, safe, and rapid methods (fast enough to be performed within the time constrains of a typical high school class). Students then use their synthesized MOFs to explore their inherent sorption properties. In one set of experiments, the synthesized MOFs are …
Synthesis Of Cadmium Arsenide Semiconductor Nanoparticles, Superatomic Silver Clusters, And Silver Coordination Polymers, Sarthak Jashubhai Patel
Synthesis Of Cadmium Arsenide Semiconductor Nanoparticles, Superatomic Silver Clusters, And Silver Coordination Polymers, Sarthak Jashubhai Patel
Legacy Theses & Dissertations (2009 - 2024)
Nanomaterials have chemical, electronic, optical, and other properties distinct from their bulk counterparts. However, the atom-precise synthesis of these materials remains a challenge, leaving open many scientific questions regarding the size regime between nanoparticulate (quantum confined) and bulk character. In this work, efforts toward the synthesis of nanoparticulate and atom-precise metal and semimetal materials are described. The synthesis of II-V semiconductor Cd3As2 having a near-zero bandgap is discussed. Analysis by UV-Vis absorption spectroscopy and powder X-ray diffraction indicate the formation of material with unexpected crystallinity and absorption properties The interaction between the molecular source of As and the solvent was …
Dna Functionalized Nanoparticles In Nanobiosensor And Sensor Array Development For Molecular Diagnostics And In Vitro Identification Of Biomolecules, Mustafa Salih Hizir
Dna Functionalized Nanoparticles In Nanobiosensor And Sensor Array Development For Molecular Diagnostics And In Vitro Identification Of Biomolecules, Mustafa Salih Hizir
Legacy Theses & Dissertations (2009 - 2024)
Nucleic acid technology along with vast variety of nanomaterials has demonstrated a great potential in many applications from biosensing studies to molecular diagnostics, from biomedical and bioanalytical research to environmental analysis. Especially short single stranded (ss) DNA molecules, called oligonucleotides, are extraordinary biopolymers featuring diverse functionality on the nanoparticles thanks to their high degree of programmability, target-specific binding or cleavage, molecular recognition ability, structure-switching capability, and unique interactions at the bio-nano interfaces. Among those, there have been many biosensing applications utilizing ss DNAs and numerous nanomaterials through various detection techniques such as fluorometric, colorimetric or electrochemical methods. Although many groundbreaking …
Genetically Engineered Polypeptides As Biomimetic Light Harvesting Optical Antenna, Jason P. Seeley
Genetically Engineered Polypeptides As Biomimetic Light Harvesting Optical Antenna, Jason P. Seeley
Legacy Theses & Dissertations (2009 - 2024)
Natural resources useful for the generation of energy are limited. The development of efficient materials capable of utilizing the abundant free solar radiation is of considerable interest. Utilization of otherwise wasted energy sources, including solar radiation, is a progressive step in the quest for sustainable energy. Solar radiation incident upon the earth’s surface exceeds current energy requirements and motivates scientists to investigate and develop functional devices and nanomaterials including light harvesting complexes (LHC) capable of capturing solar radiation for energy conversion and storage.
Technology Development For Detection Of Circulating Disease Biomarkers From Liquid Biopsies Using Multifunctional Nanomaterials, Mustafa Balcioglu
Technology Development For Detection Of Circulating Disease Biomarkers From Liquid Biopsies Using Multifunctional Nanomaterials, Mustafa Balcioglu
Legacy Theses & Dissertations (2009 - 2024)
Despite the advance health care, devastating health conditions such as cancer and infectious diseases that affect populations worldwide are too often not diagnosed until morbid symptoms become apparent in the late phase. Obtaining an early and accurate diagnosis that reveal a hidden lethal threat before the disease becomes complicated may dramatically reduce the severity of its impact on the patient’s life and increase the probability of survival. For example, in the case of ovarian cancer, which is the fifth most common malignancy and the fifth leading cause of cancer mortality in women in the US, the 5-year relative survival is …
Homo- And Heterometallic Bis(Pentafluorobenzoyl)Methanide Complexes Of Copper(Ii) And Cobalt(Ii), Janell Crowder
Homo- And Heterometallic Bis(Pentafluorobenzoyl)Methanide Complexes Of Copper(Ii) And Cobalt(Ii), Janell Crowder
Legacy Theses & Dissertations (2009 - 2024)
β-Diketones are well known to form metal complexes with practically every known metal and metalloid. Metal complexes of fluorinated β-diketones generally exhibit increased volatility and thermal stability compared to the non-fluorinated analogues, and thus are used extensively in various chemical vapor deposition (CVD) processes for the deposition of metal, simple or mixed metal oxides, and fluorine-doped metal oxide thin films. Furthermore, the electron-withdrawing nature of the fluorinated ligand enhances the Lewis acidity of a coordinatively unsaturated metal center which facilitates additional coordination reactions. The physical and structural properties of fluorinated β-diketonate complexes are discussed in Chapter 1 …
Towards A Biomimetic Elastin-Based Nanofiber Scaffold For Salivary Gland Tissue Regeneration And Growth Factor Delivery, Zahraa Ismail Ahmed Foraida
Towards A Biomimetic Elastin-Based Nanofiber Scaffold For Salivary Gland Tissue Regeneration And Growth Factor Delivery, Zahraa Ismail Ahmed Foraida
Legacy Theses & Dissertations (2009 - 2024)
Development of electrospun nanofibers that mimic the structural, mechanical and biochemical properties of natural extracellular matrices (ECMs) and the basement membranes is a promising approach for tissue regeneration. Electrospun fibers of synthetic polymers partially mimic the topography of the ECM, however, their high stiffness, poor hydrophilicity and lack of in vivo-like biochemical cues is not optimal for epithelial cell self-organization and function. In search of a biomimetic scaffold for salivary gland tissue regeneration, we utilized proteins and peptides to induce biomechanical and biochemical cues that resembles the native tissue environment. These functional molecules were introduced to our previously-developed poly lactic-co-glycolic …
Computational Optimization And Characterization Of Molecularly Imprinted Polymers, Jacob Jordan Terracina
Computational Optimization And Characterization Of Molecularly Imprinted Polymers, Jacob Jordan Terracina
Legacy Theses & Dissertations (2009 - 2024)
Molecularly imprinted polymers (MIPs) are a class of materials containing sites capable of selectively binding to the imprinted target molecule. Computational chemistry techniques were used to study the effect of different fabrication parameters (the monomer-to-target ratios, pre-polymerization solvent, temperature, and pH) on the formation of the MIP binding sites. Imprinted binding sites were built in silico for the purposes of better characterizing the receptor – ligand interactions. Chiefly, the sites were characterized with respect to their selectivities and the heterogeneity between sites.
The Technology Development And Commercialization Of 'Smart' Scientific Instrumentations, Tony Hoang
The Technology Development And Commercialization Of 'Smart' Scientific Instrumentations, Tony Hoang
Legacy Theses & Dissertations (2009 - 2024)
The technology development of two centrifuge-based instruments gave rise to an Internet-of-Things (IOT) biotech startup. The first instrument: the centrifuge force microscope (CFM) was recently introduced as a platform for massively parallel single-molecule manipulation and analysis. Here we developed a low-cost and self-contained CFM module that works directly within a commercial centrifuge, greatly improving accessibility and ease of use. Our instrument incorporates research grade video microscopy, a power source, a computer, and wireless transmission capability to simultaneously monitor many individually tethered microspheres. Building off of the first project, the second instrument we introduced was the “smart” centrifuge-test tube holder. The …
Mechanisms Of Euv Exposure : Photons, Electrons And Holes, Amrit Kausik Narasimhan
Mechanisms Of Euv Exposure : Photons, Electrons And Holes, Amrit Kausik Narasimhan
Legacy Theses & Dissertations (2009 - 2024)
The microelectronics industry’s movement toward smaller and smaller feature sizes has necessitated a shift to Extreme Ultra-Violet (EUV) lithography to be able to pattern sub 20-nm features, much like earlier shifts from i-line to 248 nm. However, this shift from 193-nm lithography to EUV (13.5 nm) poses significant obstacles. EUV is the first optical lithography to operate in an energy range (92 eV per photon vs. 6.4 eV per photon for 193 nm lithography) above the electron binding energies of common resist atomic species. This significant energy increase complicates resist design. For exposures of equal dose, resists receive 14 times …
Degradation And Exciton Energy Transfer Studies In Single-Walled Carbon Nanotube Bundles, Abhishek Gottipati
Degradation And Exciton Energy Transfer Studies In Single-Walled Carbon Nanotube Bundles, Abhishek Gottipati
Legacy Theses & Dissertations (2009 - 2024)
Single walled carbon nanotubes (SWNTs) due to their unique optical behavior, large surface area, robust mechanical strength and electrical properties make them one of the ideal candidates for sensing and opto-electronic applications. In this work, we explore the energy transfer (exciton energy transfer-EET) phenomena occurring between nanotubes in bundles, using resonance Raman spectroscopy.
Initiated Chemical Vapor Deposition (Icvd) Polymer Thin Films : Structure-Property Effects On Thermal Degradation And Adhesion, Vijay Jain Bharamaiah Jeevendrakumar
Initiated Chemical Vapor Deposition (Icvd) Polymer Thin Films : Structure-Property Effects On Thermal Degradation And Adhesion, Vijay Jain Bharamaiah Jeevendrakumar
Legacy Theses & Dissertations (2009 - 2024)
Opportunities and challenges for chemical vapor deposition (CVD) of polymer thin films stems from their applications in electronics, sensors, and adhesives with demands for control over film composition, conformity and stability. Initiated chemical vapor deposition (iCVD) is a subset of the CVD technique that conjoins bulk free-radical polymerization chemistry with gas-phase processing. The novelty of iCVD technique stems from the use of an initiator that can be activated at low energies (150 – 300 °C) to react with surface adsorbed monomer to form a polymer film. This reduces risk for potential unwarranted side-reactions.
Two-Dimensional Chalcogenides : Material Synthesis And Nano-Device Applications, Robin Bay Jacobs-Gedrim
Two-Dimensional Chalcogenides : Material Synthesis And Nano-Device Applications, Robin Bay Jacobs-Gedrim
Legacy Theses & Dissertations (2009 - 2024)
Low-dimensional nanostructures exhibit distinct properties from their bulk counterparts. Here the synthesis of novel low-dimensional nanostructures is demonstrated using both top down and bottom up processes and their properties are investigated. Two-dimensional (2D) binary sesquichalcogenides are introduced as a viable material platform for phase change random access memory, photodetection, and the investigation of topological insulator surface states. An exponential relationship is observed between layer thickness and energy consumption during switching of 2D phase change devices, ultra-high responsivity in 2D photoresistors, and surface-rich conduction in 2D topological insulator nanoplates. Additionally, methods for the assessment of chemical purity, stoichiometry, and dimensions of …
Characterization Of Metallic And Semimetallic Oxide Nanoparticles In Industrial Wastewater And Associated Toxicity, Gary Roth
Legacy Theses & Dissertations (2009 - 2024)
Engineered nanomaterials (ENMs) play an increasing role in manufacturing and consumer products. Currently, there is no standard approach to studying ENM toxicity, and a growing body of literature suggests that ENMs may have toxicity differing from similar compounds in bulk or dissolved form. I examined ENMs used in the semiconductor manufacturing process called chemical-mechanical planarization (CMP) for their properties, removal in the wastewater treatment system (WWT), in-vitro toxicity, and location post-inhalation in-vivo. It was found that ENMs in CMP slurries have morphology determined by their elemental composition, but assessment of size and concentration can differ substantially between accepted techniques. Particles …
First-Principles Study Of The Electric Field Effect On The Water-Adsorbed Rutile Titanium Dioxide Surface, Abraham L. Hmiel
First-Principles Study Of The Electric Field Effect On The Water-Adsorbed Rutile Titanium Dioxide Surface, Abraham L. Hmiel
Legacy Theses & Dissertations (2009 - 2024)
TiO2 is a semiconducting material that has been used extensively in many industrial applications, and recently has become a candidate for photocatalytic water splitting, fuel cell anode support materials, sensors, and other novel nanodevices. The interface of TiO2 with water, historically well-studied but still poorly understood, presents a ubiquitous environmental challenge towards the ultimate practical usefulness of these technologies. Ground-state density functional theory (DFT) calculations studying the characteristics of molecular adsorption on model surfaces have been studied for decades, showing constant improvement in the description of the energetics and electronic structure at interfaces. These simulations are invaluable in the …
The Effect Of Nanostructure On The Electrical Properties Of Metal Oxide Materials, Philip Zachary Rice
The Effect Of Nanostructure On The Electrical Properties Of Metal Oxide Materials, Philip Zachary Rice
Legacy Theses & Dissertations (2009 - 2024)
Resistive random access memory (ReRAM) is a potential replacement technology for Flash and other memory implementations. Advantages of ReRAM include increased scalability, low power operation, and compatibility with silicon semiconductor manufacturing. Most of the ReRAM devices described to date have utilized thin film based metal oxide dielectrics as a resistive switching matrix. The goal of this dissertation project has been to investigate the resistive switching behavior of nanoparticulate metal oxides and to develop methods to utilize these materials in ReRAM device fabrication. To this end, nanoparticles of TiO2 and HfO2 were synthesized under a variety of conditions resulting …
Novel Resist Systems For Euv Lithography : Ler, Chain-Scission, Nanoparticle And More, Brian Cardineau
Novel Resist Systems For Euv Lithography : Ler, Chain-Scission, Nanoparticle And More, Brian Cardineau
Legacy Theses & Dissertations (2009 - 2024)
Extreme Ultraviolet (EUV) lithography is currently the best option for replacing 193-nm lithography in future IC fabrication. For EUV to be successful, however, there are a number of challenges that must be overcome. Current resist designs struggle to meet the demands of future lithography nodes. We propose the best way to overcome these obstacles is through the design of novel resist systems.
A Novel Fabrication Technique For Three-Dimensional Nanostructures, Ravi Kiran Bonam
A Novel Fabrication Technique For Three-Dimensional Nanostructures, Ravi Kiran Bonam
Legacy Theses & Dissertations (2009 - 2024)
Three dimensional micro- and nano-structures are commonly used in the field of Photonics, Optoelectronics, Sensors and Biological applications. Although numerous physical models are developed, a major challenge has been in their fabrication which is commonly limited to conventional layer-by-layer techniques. In this dissertation, a novel method for fabricating three dimensional structures using Electron Beam Lithography (EBL) will be presented.
Investigation Of Titanium Nitride As Catalyst Support Material And Development Of Durable Electrocatalysts For Proton Exchange Membrane Fuel Cells, Bharat Avasarala
Investigation Of Titanium Nitride As Catalyst Support Material And Development Of Durable Electrocatalysts For Proton Exchange Membrane Fuel Cells, Bharat Avasarala
Legacy Theses & Dissertations (2009 - 2024)
The impending energy and climatic crisis makes it imperative for human society to seek non-fossil based alternative sources for our energy needs. Although many alternative energy technologies are currently being developed, fuel cell technology provides energy solutions, which satisfy a wide range of applications. But the current fuel cell technology is far from its target of large scale commercialization mainly because of its high cost and poor durability. Considerable work has been done in reducing the cost but its durability still needs significant improvement. Of the various materials in a PEM fuel cell, the degradation of electrocatalyst affects its durability …
Design And Development Of Highly Active, Nanoengineered, Platinum Based Core-Shell Electrodes For Proton Exchange Membrane Fuel Cells, Seth Louis Knupp
Design And Development Of Highly Active, Nanoengineered, Platinum Based Core-Shell Electrodes For Proton Exchange Membrane Fuel Cells, Seth Louis Knupp
Legacy Theses & Dissertations (2009 - 2024)
Highly active nanoengineered core-shell electrocatalyst have a great potential to be used as fuel cell electrodes. They can alleviate problems related with commercial carbon supported platinum by simultaneously lowering cost while enhancing reaction kinetics and overall performance. More recently, use of nanoengineered core-shell electrode structures have showed their ability to enhance the stability and overall lifetime of the catalyst without sacrificing the electrode's performance. We studied the potential of using highly active core-shell nanoparticles supported on carbon nanomaterials as fuel cell electrodes.
Nanocomposite Thin Films Of Au Nanoparticles Embedded In Yttria-Stabilized Zirconia For Plasmonic-Based Harsh Environment Gas Detection, Phillip Henry Rogers
Nanocomposite Thin Films Of Au Nanoparticles Embedded In Yttria-Stabilized Zirconia For Plasmonic-Based Harsh Environment Gas Detection, Phillip Henry Rogers
Legacy Theses & Dissertations (2009 - 2024)
Increased health concerns due to the emission of gases linked to the production of tropospheric ozone by petroleum based fuel burning engines has resulted in the codification of more stringent emissions regulations domestically. Emissions regulations on commercial jetliners are one of the areas to be met with stricter standards. Currently there is not a sensing technology that can detect the emissions gases in the exhaust stream of a jet turbine engine with lower detection limits that meet these standards.