Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 30 of 46
Full-Text Articles in Chemistry
Development Of Boron-Containing Polyimide Materials And Poly(Arylene Ether)S For Radiation Shielding, Brittani May Collins
Development Of Boron-Containing Polyimide Materials And Poly(Arylene Ether)S For Radiation Shielding, Brittani May Collins
Dissertations, Theses, and Masters Projects
No abstract provided.
Polymeric Radiation Shielding For Applications In Space: Polyimide Synthesis And Modeling Of Multi-Layered Polymeric Shields, Clinton Cleveland Schiavone
Polymeric Radiation Shielding For Applications In Space: Polyimide Synthesis And Modeling Of Multi-Layered Polymeric Shields, Clinton Cleveland Schiavone
Dissertations, Theses, and Masters Projects
No abstract provided.
Characterization Of Pa-11 Flexible Liner Aging In The Laboratory And In Field Environments Throughout The World, Arthur Jaeton Mitman Glover
Characterization Of Pa-11 Flexible Liner Aging In The Laboratory And In Field Environments Throughout The World, Arthur Jaeton Mitman Glover
Dissertations, Theses, and Masters Projects
Polyamide-11 (PA11) is a polymer of the Nylon family whose monomer is obtained from the castor bean, a renewable resource. It is widely used in offshore oil and gas production as a non-rigid flexible pipe liner, allowing for oil and gas transport from the wellhead to floating platforms for processing. The degradation of PA11 over time may lead to the pipe's failure, with possibly catastrophic results which include loss of life. Until now, the characterization of the degredative process has been limited to laboratory studies of the effects of water and temperature on the rate and degree of hydrolysis. In …
Production Of Cyclohexylene-Containing Diamines In Pursuit Of Novel Radiation Shielding Materials, Norah G. Bate
Production Of Cyclohexylene-Containing Diamines In Pursuit Of Novel Radiation Shielding Materials, Norah G. Bate
Dissertations, Theses, and Masters Projects
No abstract provided.
Processing And Conversion Of Algae To Bioethanol, Sara Katherine Kampfe
Processing And Conversion Of Algae To Bioethanol, Sara Katherine Kampfe
Dissertations, Theses, and Masters Projects
No abstract provided.
Silver-Polyimide Nanocomposite Films: Single-Stage Synthesis And Analysis Of Metalized Partially-Fluorinated Polyimide Btda/4-Bdaf Prepared From Silver(I) Complexes, Joshua Erold Robert Abelard
Silver-Polyimide Nanocomposite Films: Single-Stage Synthesis And Analysis Of Metalized Partially-Fluorinated Polyimide Btda/4-Bdaf Prepared From Silver(I) Complexes, Joshua Erold Robert Abelard
Dissertations, Theses, and Masters Projects
No abstract provided.
Multifunctional Polymer Synthesis And Incorporation Of Gadolinium Compounds And Modified Tungsten Nanoparticles For Improvement Of Radiation Shielding For Use In Outer Space, Emily Grace Harbert
Multifunctional Polymer Synthesis And Incorporation Of Gadolinium Compounds And Modified Tungsten Nanoparticles For Improvement Of Radiation Shielding For Use In Outer Space, Emily Grace Harbert
Dissertations, Theses, and Masters Projects
No abstract provided.
Effects Of Metal-Based Montmorillonite Clay And Zeolite Additives On The Fire Retardance And Smoke Suppression Of Poly(Vinyl Chloride), Alexander George Zestos
Effects Of Metal-Based Montmorillonite Clay And Zeolite Additives On The Fire Retardance And Smoke Suppression Of Poly(Vinyl Chloride), Alexander George Zestos
Dissertations, Theses, and Masters Projects
No abstract provided.
Novel Approaches To The Fabrication Of Highly Conductive Silver Surfaces Well Adhered To Polyimide Substrates, Luke Michael Davis
Novel Approaches To The Fabrication Of Highly Conductive Silver Surfaces Well Adhered To Polyimide Substrates, Luke Michael Davis
Dissertations, Theses, and Masters Projects
No abstract provided.
Boron Carbide Filled Neutron Shielding Textile Polymers, Derrick Anthony Manzlak
Boron Carbide Filled Neutron Shielding Textile Polymers, Derrick Anthony Manzlak
Dissertations, Theses, and Masters Projects
No abstract provided.
Characterization Of Ionic, Dipolar And Molecular Mobility In Polymer Systems, Zhenrong Guo
Characterization Of Ionic, Dipolar And Molecular Mobility In Polymer Systems, Zhenrong Guo
Dissertations, Theses, and Masters Projects
Changes in the ionic and dipolar molecular mobility in a polymer system are the basis for the changes in the dielectric mechanical properties of polymer materials. Frequency Dependent Dielectric Measurements (FDEMS) and Ion Time-of-Flight (ITOF) are two important techniques to investigate ionic and dipolar molecular mobility in polymer systems. The results can be related to the macro- and molecular dielectric, electrical and dynamic properties of polymeric materials. The combination of these two methods provides a full view of electric, dielectric and dynamic behavior for the systems as they undergo chemical and/or physical changes during polymerization crystallization, vitrification, and/or phase separation.;The …
Synthesis And Characterization Of Hydrogen-Rich Polyimide Materials For Radiation Shielding, Sha Yang
Synthesis And Characterization Of Hydrogen-Rich Polyimide Materials For Radiation Shielding, Sha Yang
Dissertations, Theses, and Masters Projects
No abstract provided.
Photochemical Modification Of Polyethylene Terephthalate Surface, Zhengmao Zhu
Photochemical Modification Of Polyethylene Terephthalate Surface, Zhengmao Zhu
Dissertations, Theses, and Masters Projects
The prospect of obtaining desired surface-mediated characteristics while retaining bulk-mediated physical properties and avoiding potential environmental issues with wet chemical technology lends considerable appeal to photochemical approaches to surface modification.;We undertook a combined experimental and computational approach to investigate the effect of deep UV irradiation on the polyethylene terephthalate (PET) surface. its response to 172 nm UV from a xenon examiner lamp in the absence of oxygen was characterized with X-ray Photoelectron Spectroscopy (XPS), Time of Flight/Secondary Ion Mass Spectrometry (ToF/SIMS), transmission infrared spectroscopy (IR), and Atomic Force Microscopy (AFM). The surface chemistry details suggested that the primary photochemical reactions …
Solid State Nmr Characterization Of Conductive Polyanilines, Yanina Anatolievna Goddard
Solid State Nmr Characterization Of Conductive Polyanilines, Yanina Anatolievna Goddard
Dissertations, Theses, and Masters Projects
Different forms of ring deuterated polyaniline with different conductivity have been characterized by solid state deuteron nuclear magnetic resonance.;Quadrupole echo (QE) spectra of all forms of polyaniline consist of a superposition of lineshapes for nearly rigid aromatic rings and a small fraction of rings which undergo fast 180?? flips. The intensity of the fast flipping component is temperature dependent and different for conductive emeraldine salt (ES) and non-conductive emeraldine base (EB). This is a manifestation of the different structure and morphology of these polymers.;Simultaneous measurements of QE lineshapes and the relaxation time anisotropies allowed an accurate description of motion in …
Synthesis And Characterization Of Polyimide Residuum, Friable Balloons, Microspheres And Foams, Erik Saul Weiser
Synthesis And Characterization Of Polyimide Residuum, Friable Balloons, Microspheres And Foams, Erik Saul Weiser
Dissertations, Theses, and Masters Projects
In order to meet requirements of future NASA systems for advanced polymeric cellular materials, research was undertaken to develop the next generation of polyimide foams which could be utilized as a reusable structural insulation on future Reusable Launch Vehicle (RLV) Programs. This research activity focused on developing polyimide foam and foam structures which were made using monomeric solutions or salt solutions formed from the reaction of a dianhydride and diamine dissolved in a mixture of foaming agents and alkyl alcohols. This process produced a precursor solid residuum which could then be manufactured into foams, friable balloons and microspheres. Polyimide foams …
The Dehydrochlorination Mechanism Of The Internal Allylic Chloride Structure In Poly(Vinyl Chloride), Lynda B. Payne
The Dehydrochlorination Mechanism Of The Internal Allylic Chloride Structure In Poly(Vinyl Chloride), Lynda B. Payne
Dissertations, Theses, and Masters Projects
No abstract provided.
A Study Of The Aging Of Polyamide-11 Based On Molecular Weight Measurements, Yao Lin
A Study Of The Aging Of Polyamide-11 Based On Molecular Weight Measurements, Yao Lin
Dissertations, Theses, and Masters Projects
No abstract provided.
In-Situ Frequency-Dependent Electromagnetic Sensing For Monitoring Physical And Chemical Attributes During Chemical Processing, Jeffrey David Rogozinski
In-Situ Frequency-Dependent Electromagnetic Sensing For Monitoring Physical And Chemical Attributes During Chemical Processing, Jeffrey David Rogozinski
Dissertations, Theses, and Masters Projects
The objective of this research was to develop an in-situ sensing technique that monitors the molecular-level response of ions and dipoles to an applied electric field in order to characterize the changes in state of a polymer resin during chemical processing. This technique needs to be capable of monitoring the reaction progress not only in the laboratory setting but also in-situ in the processing tool or reaction environment. Frequency Dependent Electromagnetic Sensing (FDEMS) was selected for this task.;This dissertation investigates the applicability of FDEMS to monitoring two types of processing methods: reactive and batch reactor. The reactive processing system examined …
Fabrications And Characterizations Of Boron Containing Polyimides For Radiation Shielding, Christopher Scott Pugh
Fabrications And Characterizations Of Boron Containing Polyimides For Radiation Shielding, Christopher Scott Pugh
Dissertations, Theses, and Masters Projects
No abstract provided.
Platinized Tin Oxide: A Low-Temperature Oxidation Catalyst, Erik Joshua Kielin
Platinized Tin Oxide: A Low-Temperature Oxidation Catalyst, Erik Joshua Kielin
Dissertations, Theses, and Masters Projects
Some combinations of noble metal and reducible metal oxide possess a synergistic level of activity for the catalytic oxidation of CO at lower temperatures and partial pressures of O2 than can be obtained by either component alone. The most promising candidates, Au on MnO2 and Pt on SnO 2, were investigated for the effects on activity of noble metal loading, of reductive pretreatment at elevated temperature, and of reaction gas mixture composition. Optimum activity was obtained at a noble metal loading of 28% Au/MnO2 and 17% Pt/SnO2. Both catalysts benefitted from reductive CO pretreatment at 125??C. Both catalysts showed enhanced …
Chemical Interaction Of "Declorane Plus" With Antimony Trioxide In Nylon 66, Yum Min Kang
Chemical Interaction Of "Declorane Plus" With Antimony Trioxide In Nylon 66, Yum Min Kang
Dissertations, Theses, and Masters Projects
No abstract provided.
Correlation Of Dynamic Dielectric Properties To Reaction Kinetics And Changing Mechanical Properties Of Epoxy Resins During Cure, Yunfei Wang
Dissertations, Theses, and Masters Projects
The principal objective of this paper is to describe how complex impedance, obtained from frequency dependent dielectric sensing technique, can be used as an effective diagnostic tool for in situ real-time investigation in the fabrication of thermoset structures.;Two epoxy systems (Pr500 from 3M and My720 from Ciba Geigy) with different functionality are characterized in terms of their dielectric, thermal, and rheological behavior. It is observed that there is a one to one relationship between Tg and conversion which is independent of cure temperature. The chemical kinetics of the reaction is satisfactorily described by an autocatalyzed reaction mechanism. The chemical rate …
The Synthesis Of Reflective And Electrically Conductive Polyimide Films Via An In Situ Self-Metallization Procedure Using Silver(I) Complexes, Robin Elaine Southward
The Synthesis Of Reflective And Electrically Conductive Polyimide Films Via An In Situ Self-Metallization Procedure Using Silver(I) Complexes, Robin Elaine Southward
Dissertations, Theses, and Masters Projects
Optically reflective polyimide films have been prepared by the incorporation of silver(I) acetate and a {dollar}\beta{dollar}-diketone solubilizing agent, hexafluoroacetylacetone (HFAH), into a dimethylacetamide solution of the poly(amic acid) formed from {dollar}3,3\sp\prime,4,4\sp\prime{dollar}-benzophenonetetracarboxylic acid dianhydride (BTDA) and {dollar}4,4\sp\prime{dollar}-oxydianiline {dollar}(4,4\sp\prime{dollar}-ODA). Optically reflective and conductive polyimide films have been prepared by replacing the {dollar}\beta{dollar}-diketone (HFAH), with the less substituted {dollar}\beta{dollar}-diketone, trifluoroacetylacetone (TFAH). The former system has been both cast directly from the poly(amic acid) resin and cast from the poly(amic acid) resin onto a fully imidized {dollar}\rm BTDA/4,4\sp\prime{dollar}-ODA base (forming a metallized topcoat). Thermal curing of the silver(I)-containing poly(amic acid) leads to imidization with …
Characterization Of Epoxy-Amine Systems And Nylon-11 And Pvdf Degradation, Wendy Raquel Mahler
Characterization Of Epoxy-Amine Systems And Nylon-11 And Pvdf Degradation, Wendy Raquel Mahler
Dissertations, Theses, and Masters Projects
No abstract provided.
The Influence Of Microstructure On The Thermal Degradation Behavior Of Poly(Vinyl Chloride), Hoang Vi Tran
The Influence Of Microstructure On The Thermal Degradation Behavior Of Poly(Vinyl Chloride), Hoang Vi Tran
Dissertations, Theses, and Masters Projects
No abstract provided.
The Synthesis, Characterization, And Molecular Modeling Of Cyclic Arylene Ether Oligomers, Sheeba Ahmed
The Synthesis, Characterization, And Molecular Modeling Of Cyclic Arylene Ether Oligomers, Sheeba Ahmed
Dissertations, Theses, and Masters Projects
Cyclophanes are a family of bridged cyclic aromatic compounds that have found extensive applications in host-guest chemistry, molecular recognition, biomimetics and most recently as precursors in ring-opening polymerizations.;This research presents the synthesis of several novel cyclic arylene ether oligomers, based on 1,3-bis(4-fluorobenzoyl) benzene and 3,3{dollar}\sp\prime{dollar}-methylene diphenol and 3,3{dollar}\sp\prime{dollar}-(ethylene dioxy) diphenol, and their characterization by LC-MS/MS, 1-D {dollar}\sp1{dollar}H-NMR and x-ray crystallography. Electrospray ionization (ES) along with MS/MS was used to characterize cyclic oligomers of molecular weight up to 1600 Da. The thermal properties of these cyclic oligomers were studied by differential scanning calorimetery (DSC) and thermal gravimetric analysis (TGA).;These cyclic oligomers …
The Thermal Cure Of Phenylethynyl-Terminated Polyimides And Selected Model Compounds, Karen H. Wood
The Thermal Cure Of Phenylethynyl-Terminated Polyimides And Selected Model Compounds, Karen H. Wood
Dissertations, Theses, and Masters Projects
The ability to process high performance polymers into useful adhesives and high quality composites has been significantly advanced by synthetic techniques in which oligomers terminated with reactive groups cure or crosslink at elevated temperature after the article has been fabricated. Several matrix resin systems of considerable interest to the aerospace community utilize phenylethynyl terminated imide (PETI) technology developed at the Langley Research Center to achieve this advantage. This work addresses the cure chemistry of PETI oligomers.;The thermal cure of selected oligomers and model compounds was studied using a variety of analytical techniques including differential scanning calorimetry, high pressure liquid chromatography, …
The Promotion Of Poly(Methyl Methacrylate) Depolymerization By Metal-Based Initiators, Jason Andrew Macko
The Promotion Of Poly(Methyl Methacrylate) Depolymerization By Metal-Based Initiators, Jason Andrew Macko
Dissertations, Theses, and Masters Projects
No abstract provided.
Synthesis And Characterization Of Boron-Containing Polymeric Materials For Neutron Shielding Applications, Michael B. Glasgow
Synthesis And Characterization Of Boron-Containing Polymeric Materials For Neutron Shielding Applications, Michael B. Glasgow
Dissertations, Theses, and Masters Projects
The development of boron-containing polymeric materials for neutron shielding applications was undertaken. Three types of materials were characterized for physical and thermal properties: boron powder-filled epoxy composites, carborane polyamides having boron chemically bonded into the polymer, and boron-loaded polyimide thin films. Addition of amorphous submicron boron powder did not affect significantly the thermal performance of the epoxy. The 17% boron loading produced a 26% increase in compressive failure strength and a 68% increase in the compressive modulus. 0.125 inch thick specimens containing 17% boron absorbed 92% of incident neutrons from a 5-Curie Pu/Be source compared with {dollar}<{dollar}1% for the neat epoxy. Dispersion of the boron in the epoxy was improved with the addition of larger size crystalline boron powders. Carborane polyamides containing up to 35% boron were thermally stable up to 400{dollar}\sp\circ{dollar}C in air. The polymers had hydrogen/boron ratios from 2.0 to 3.8 and were soluble in several organic solvents. Polymer solutions were processed into clear, colored thin films. Boron-filled polyamic acid solutions of a PMDA-ODA polyimide containing up to 10% boron were processed into thin films. Neutron absorption of the opaque films measured in a 5-Curie Pu/Be neutron source was linear with boron concentration and film thickness. The fraction of neutrons absorbed varied linearly with boron concentration and film thickness. The applicability of boron-containing materials to the aerospace, nuclear power and accelerator industries was investigated.
Characterizing The Degradation Of Nylon-11 And Pvdf In A Flexible Oil Pipe And Cure Monitoring Of Chemflake Vinylester, John Chen Yang
Characterizing The Degradation Of Nylon-11 And Pvdf In A Flexible Oil Pipe And Cure Monitoring Of Chemflake Vinylester, John Chen Yang
Dissertations, Theses, and Masters Projects
No abstract provided.