Chemistry Commons^™

Broadband Dielectric Spectroscopic Detection Of Volatile Organic Compounds With Zinc Oxide And Metal-Organic Frameworks As Solid-State Sensor Materials, Papa Kojo Amoah

Electrical & Computer Engineering Theses & Dissertations

The industrial revolution drove technological progress but also increased the release of harmful pollutants, posing significant risks to human health and the environment. Volatile organic compounds (VOCs), which have various anthropogenic and natural sources, are particularly concerning due to their impact on public health, especially in urban areas. Addressing these adverse effects requires comprehensive strategies for mitigation as traditional gas sensing techniques have limitations and there is a need for innovative approaches to VOC detection.

VOCs encompass a diverse group of chemicals with high volatility, emitted from various human activities and natural sources. These compounds play a crucial role in …

Nb3Sn Coating Of Twin Axis Cavity And Other Complex Srf Cavity Structures, Jayendrika Kumari Tiskumara

Physics Theses & Dissertations

In the field of Accelerator Science, for the low cost and increased quality factor, thin films coated niobium cavities are used in the modern SRF research. Within the potential substances, Nb₃Sn has shown higher critical temperature than niobium. Here the tin vapor diffusion method is used as the preferred technique to coat niobium cavities. So far, only elliptical cavities have been coated with Nb₃Sn and this technique has not yet been applied to cavities with complex geometries, which are also helpful in the accelerator science field. The Half-wave resonator could provide us data across frequencies of …

Development Of High Quantum Efficiency Strained Superlattice Spin Polarized Photocathodes Via Metal Organic Chemical Vapor Deposition, Benjamin Belfore

Electrical & Computer Engineering Theses & Dissertations

Spin polarized photocathodes are necessary to examine parity violations and other fundamental phenomena in the field of high energy physics. To create these devices, expensive and complicated growth processes are necessary. While integral to accelerator physics, spin polarized electrons could have other exciting applications in materials science and other fields of physics. In order to explore these other applications feasibly, the relative supply of spin polarized photocathodes with a high rate of both polarization and photoemission needs to be increased. One such way to increase this supply is to develop the means to grow them faster and at a larger …

Synthesis And Characterization Of 4,6-Protected Glucosamine Derivatives And Branched Glycoconjugates, Jonathan Bietsch

Chemistry & Biochemistry Theses & Dissertations

Low molecular weight gelators (LMWGs) are small molecules that self-assemble in appropriate solvents to form three dimensional networks that immobilize the solvent, creating a supramolecular gel. The self-assembly of LMWGs occurs through non-covalent interactions such as hydrogen bonding, aromatic interactions, donor-acceptor interactions, Van der Waals interactions, hydrophobic forces, halogen bonding, etc. Due to self-assembly occurring through reversible non-covalent interactions, supramolecular gels can undergo a gel to solution transformation. Because of this, these materials can be sensitive to external stimuli such as temperature changes, pH changes, and other stimuli that effect non-covalent interactions. This makes the synthesis of LMWG’s an appealing …

Molecular Dynamics Simulations Of Ion Transport Through Electrically Stressed Biological Membranes, Federica Castellani

Biomedical Engineering Theses & Dissertations

The cell membrane is a selectively permeable barrier that controls the transport of ions, molecules, and other materials into and out of a cell. The manipulation of the cell membrane permeability is the basis for several biotechnological and biomedical applications, including electroporation. Electroporation (or electropermeabilization) occurs when the application of an external electric pulse causes water intrusion into the membrane interior and the formation of conductive transmembrane electropores. These electropores allow drugs, genetic material, and other normally impermeant molecules to enter a cell. Despite years of study, the complex mechanisms underlying this process are still not well understood. Molecular dynamics …

The Development Of Novel Carbohydrate-Based Gelators And Their Applications As Advanced Soft Materials, Joedian Morris

Chemistry & Biochemistry Theses & Dissertations

Low molecular weight gelators (LMWGs) are attractive molecules that have been explored extensively due to their practical applications in many disciplines. These small molecules self-assemble forming solid-like gels via three-dimensional cross-linked networks with the solvent as the key component within the matrix. Carbohydrate-based LMWGs are small molecules that can form solid-like gels in water, organic solvents, and aqueous solutions. They have great potential to be utilized in different applications because carbohydrates are biocompatible and can be made from easily accessible and renewable resources. Designing gelators is still a challenge within the field, even though researchers have developed tools to predict …

Synthesis, Characterization, Spectroscopic, And Mesomorphic Studies Of New Schiff Base Ligands And Titanium, Cobalt, Nickel And Copper Metal Centers, Raj K. Gurung

Chemistry & Biochemistry Theses & Dissertations

Transition metal complexes with Schiff base ligands offer a wide application in the field of development of catalysis and material. The straightforward synthesis allowed the structural modification and helped to optimize in various application of such complexes. Titanium-containing complexes have been reported to be important for their catalytic and material applications through the coordination of a tetradentate Schiff base ligand, viz. N, N’-ethylene bis(salicylideneiminate) dianion (salen). Studies reporting the characterization of achiral titanium(IV) salen complexes are scarce due to their intricate nature. Such complexes would be comparatively less expensive and easier to prepare synthetically and thus could represent an …

Lignin: A Likely Precursor Of A Significant Fraction Of Humic Substances Via Oxidative Transformations, Seyyedhadi Khatami

Chemistry & Biochemistry Theses & Dissertations

Lignin is a major component of decaying terrestrial vegetation in soils and has been arguably reported to contribute substantially to the formation of soil carbon humus, and natural dissolved organic matter (DOM). To better understand the process by which this humification occurs, lignin and lignin-derived monomers were subjected to both biotic and abiotic oxidation processes. Two well-known oxidative transformation strategies were employed. The first involved the fungal degradation of brown-rot degraded wood subjected to a white-rot fungus (Phanerochaete chrysosporium) whose enzymes are particularly effective in lignin degradation via enzymatic oxidation. This enzymatic attack was monitored by ultrahigh resolution …

A Dual Nanostructured Approach To Sers Amenable To Large-Scale Production, Kory Brian Castro

Chemistry & Biochemistry Theses & Dissertations

A SERS device was made using a dual-nanostructured surface comprised of silver nanoparticle and silver nanowires. The ability of each nanostructure to produce a uniform surface was characterized and the surface-enhanced Raman scattering (SERS) response of the resulting surfaces were examined using the reporter molecule 4-aminothiolphenol (ATP) and a 638 nm excitation laser.

A synthetic method was developed to produce silver nanowires with lengths of ~20 μm and diameters of ~100 nm with a narrow size distribution. The method utilized a simple, one-pot synthesis that is amenable to large-scale production. A selective precipitation method was used to the isolate the …

Development And Evaluation Of Post-Production Oxygenation Techniques For The Augmentation Of Biochar, Matthew David Huff

Chemistry & Biochemistry Theses & Dissertations

Biochar is the carbon rich solid by-product of biomass pyrolysis. Interest in biochar can be broken down to several main categories: use as a carbon sequestration agent, use as a medium for the removal via adsorption of unwanted materials in wastewater, and as a soil amendment for the increase of cation exchange capacity (CEC). In order to generate a biochar which is stable enough for carbon sequestration, higher temperature pyrolysis must be used in order to ensure a lower O:C ratio in order to increase the half-life of biochar in soil. This dissertation addresses the evaluation of biochars made from …

Possible Sources And Impacts Of Biochar Water Extractable Organic Compounds On Aquatic Microorganisms, Cameron Russell Smith

Chemistry & Biochemistry Theses & Dissertations

Smokeless biomass pyrolysis with application of biochar as a soil amendment could be a significant approach for carbon sequestration to possibly control climate change for energy and environmental sustainability. If biochar were to be utilized as a soil amendment and a carbon sequestration agent at Gt C scales, the release of potentially toxic compounds into soils and associated hydrological systems, through soil rainwater runoff and leaching, might have negative consequences, in both agro-ecosystems and aquatic environmental systems. Therefore, the main focus of this dissertation was to study the sources and chemical composition of biochar water extractable (soluble) organic compounds and …

Low-Temperature Artificial Maturation Studies Of Type Ii And Type Iii Kerogens: Implications For Biogenic Gas Production, Albert Willy Nguena Kamga

Chemistry & Biochemistry Theses & Dissertations

Ancient organic matter (OM) in shales and coals, known mainly as Type II and Type III OM are known to produce both biogenic, thermogenic gas and oil. In this dissertation, mild artificial maturation, via closed system pyrolysis, is employed to determine the thermal reactivity of Type II and Type III OM beyond diagenesis. We select three Type II kerogens: i) Type II kerogen isolated from recent cores (3.3 Ma, Ro = 0.28) recovered from an upwelling basin in Namibia, Africa referred to as ODP Sediment, ii) Type II-S isolated from sediments (150 Ma, Ro = 0.38) recovered from an outcrop …

Synthesis, Morphological Control, Dispersion Stabilization And In Situ Self-Assembly Of Noble Metal Nanostructures Using Multidentate Resorcinarene Surfactants, Sangbum Han

Chemistry & Biochemistry Theses & Dissertations

In this dissertation, a detailed investigation on the influence of various macrocyclic resorcinarene surfactants in determining the morphology, stabilization and self-assembly of mono- and bi- metallic nanoparticles was undertaken. Chapter 2 describes the influence of resorcinarene surfactants functionalized with amine- and thiol- headgroups in determining the morphology of monometallic Pt nanoparticles synthesized via the Brust-Schiffrin reaction. We found that while resorcinarene benzylthiol can lead to the formation of highly branched Pt nanostructures, resorcinarene amine can lead to the formation of anisotropic crystalline Pt nanoparticles. Further, we have evaluated the influence of resorcinarene ligands in determining the catalytic activity of these …

Synthesis, Characterisation, Electrochemical, And Spectroscopic Studies Of Cobaloximes: Unique Clues Of Cobalt(I) Species In Various Solvents, Michael John Celestine

Chemistry & Biochemistry Theses & Dissertations

With the dwindling amount of fossil fuels in the world’s reserve is said to run out in the future. The use of alternative fuels such as hydrogen can be produced from renewable sources. One source is the use of first row transition metal complexes that can harness the power of the sun to reduce protons to hydrogen. In this thesis we investigated a well-known hydrogen evolution catalyst in a quest to understand the behavior of different oxidation states that occur during the catalytic cycle.

In an attempt to synthesize a binuclear ruthenium(II) complex, [{Ru(phen)2}2{µmes(1,4-phO-Izphen)3}](PF6)4, as a possible photosensitizer for the …

Investigation Of The Potential For Algaenan To Produce Hydrocarbon Based Fuels From Algae By Hydrous Pyrolysis, Wassim Adel Obeid

Chemistry & Biochemistry Theses & Dissertations

The use of algae as a feedstock for hydrous pyrolysis has a high potential for producing biofuels. The non-food nature of algae in addition to the various advantages associated with the hydrous pyrolysis process makes this combination for the production of biofuels of high interest. However, current results from algae processing have alluded to some challenges: byproducts arising from the thermal transformation of carbohydrates and proteins, which become incorporated in the oil fraction, result in high oxygen and nitrogen contents of the oil. Accordingly, this produces an oil of low quality for refineries. This dissertation investigates use of a pretreatment …

In Vivo Near Ir Fluorescent Imaging Of Hollow Polymeric Nanocapsules, Venkata Suresh Patthipati

Biological Sciences Theses & Dissertations

Medical Imaging has been an integral component in medical diagnosis and therapeutics. It is frequently used in conjunction with other treatment modalities and has been used for developing applications that range from cancer management to clinical practice. Nanotechnology and its applications are foreseen to have a profound impact on life sciences. Nanomaterial based imaging has a significant potential in addressing medical challenges such as tumor localization, targeted delivery of drugs and real time diagnosis and management of circulation pathology. In particular, polymer based nanoparticles are increasingly being developed as they can be customized according to the diagnostic and/or therapeutic requirements. …

Improving The Stability Of High And Low Bandgap Polymers Organic Photovoltaic Devices Using A Solution Based Titanium Sub-Oxide Interfacial Layer, Kurniawan Foe

Electrical & Computer Engineering Theses & Dissertations

The improvement in device efficiency has brought organic photovoltaic (OPV) devices closer to commercial viability, highlighting the importance of studying the lifetime and stability of OPV devices. At present, the lifetime and stability of OPV devices is much shorter and poor mainly caused by oxygen, moisture, and light resulting in the oxidation on low work function electrodes and the degradation of the morphology of the photoactive layer. To improve the lifetime and stability of the OPV devices, we used newly developed low bandgap polymer, PCDTBT, as the electron acceptor material and a solution based titanium sub-oxide (TiOx) interfacial layer inserted …

Multidentate Resorcinarene Surfactants For The Phase Transfer Of Metal Nanoparticles And Nanodiamonds: Applications In Catalysis And Diamond Film Growth, Vara Prasad Sheela

Chemistry & Biochemistry Theses & Dissertations

One main objective of the present work is to functionalize cuboctahedral platinum nanoparticles with various multidentate resorcinarene surfactants and study their influence in determining their catalytic activity. We hypothesized that catalytically active and recyclable catalysts can be achieved by incomplete yet strong passivation of the nanoparticle surfaces by using multidentate resorcinarene surfactants. We have developed phase transfer protocols for functionalizing cuboctahedral platinum nanoparticles with resorcinarene thiol or amine. Fluorescence assay confirmed that both these nanoparticles contained almost comparable unpassivated metal area. The activity of such phase transferred nanoparticles was tested in the catalytic hydrogenation of allyl alcohol. The conversion of …

Laser Processing Of Metals And Polymers, Senthilraja Singaravelu

Physics Theses & Dissertations

A laser offers a unique set of opportunities for precise delivery of high quality coherent energy. This energy can be tailored to alter the properties of material allowing a very flexible adjustment of the interaction that can lead to melting, vaporization, or just surface modification. Nowadays laser systems can be found in nearly all branches of research and industry for numerous applications. Sufficient evidence exists in the literature to suggest that further advancements in the field of laser material processing will rely significantly on the development of new process schemes. As a result they can be applied in various applications …

Solvent Dependent Morphologies In Thiol-Ene Photopolymerization: A Facile Route To Synthesis Of Resorcinarene Nanocapsules, Zaharoula Marie Kalaitzis

Chemistry & Biochemistry Theses & Dissertations

Synthesis of morphologically distinct polymeric nanostructures is vital for their wide ranging applications from nanomedicine to material science. Among various polymeric nanostructures, nanocapsules in particular have attracted a lot of attention as nanoreactors and drug delivery vehicles in nanomedicine. Often, synthesis of nanocapsules is achieved by template-based approaches. A direct, template-free method for the fabrication of nanocapsules and a variety of other morphologically distinct polymeric architectures was developed. The photopolymerization of a resorcinarene thiol-ene surfactant in various solvents lead to the formation of nanocapsules, nanoparticles, fibers, distorted honeycomb-like lattices, and sheets. The progress of the polymerization reaction and the morphology …

Melting And Solidification Study Of Indium And Bismuth Nanocrystals Using Reflection High-Energy Electron Diffraction, Mohamed K. Zayed

Electrical & Computer Engineering Theses & Dissertations

As technology begins to utilize nanocrystals for many chemical, biological, medical, electrical, and optoelectrical applications, there is a growing need for an understanding of their fundamental properties. The study of melting and solidification of nanocrystals is of interest to fundamental understanding of the effect of reduced size and crystal shape on the solid-liquid phase transition. Melting and solidification of as-deposited and recrystallized indium and bismuth nanocrystals were studied using reflection high-energy electron diffraction (RHEED). The nanocrystals were thermally deposited on highly oriented 002-graphite substrate at different deposition temperatures. The growth dynamics of the nanocrystals was studied using in situ RHEED …

Fourier Transform Raman Spectroscopy For Process Control In The Petroleum Industry, Kent Lawson Wise

Chemistry & Biochemistry Theses & Dissertations

As early as 1950, Raman spectroscopy was proposed as a method to determine aromatics and olefins in hydrocarbon mixtures. Until recently, extensive use of Raman spectroscopy in the characterization of hydrocarbons has not been practical due to several limitations. One early limitation to Raman analysis was the absence of a high intensity and stable excitation source. This problem has been overcome with the advent of lasers. Another limitation was the presence of fluorescence in hydrocarbon fuels when excited by visible lasers. However, the development of Fourier-transform Raman spectrometers now allows Raman spectra to be collected using near-IR lasers (e.g …

Characterization Of Iron Oxides And Atmospheric Corrosion Of Steel, Sei Jin Oh

Physics Theses & Dissertations

The study of corrosion behavior was performed using three different analytical techniques, which provided information on the formation, development and layering of iron oxides on the corrosion products as a function of atmospheric conditions, exposure time and type of steel. In particular, the protective layer formed on weathering steel was investigated as a function of different amounts of alloying elements in the steel, atmospheric conditions and exposure times. Combined together, the results provided a better understanding of the atmospheric corrosion behavior of steel, and formed a part of database of the atmospheric corrosion characteristics.

Accurate characterization of the iron oxides …

Petrochemical Analysis By Remote Fiber-Optic Raman Spectroscopy And Partial Least Squares Regression Analysis, Philip Edmund Flecher Jr.

Chemistry & Biochemistry Theses & Dissertations

A dispersive Raman system with charge coupled device (CCD) detection, distributed Bragg reflector (DBR) diode laser excitation, and a fiber optic probe has been developed for the rapid analysis of petrochemicals and fuels. Initially, mock petroleum fuels with analyte concentrations from 1.S - 16% were prepared and analyzed with the system. The inability of the original index guided diode laser to maintain a constant frequency during the mock petroleum analysis was a recurrent problem. The DBR laser was subsequently shown to have stability superior to index guided lasers, and was used in the remainder of the research.

Real gasoline samples …

Thermal Characterization Of Carbon Monoxide Oxidation Catalysts Using Thermogravimetric Analysts And Differential Scanning Calorimetry, Rene A. Bartgis

Chemistry & Biochemistry Theses & Dissertations

Catalysts composed of platinum and/or palladium on tin (IV) oxide supports, with and without silica gel, as well as catalysts composed of gold on manganese oxide, have been developed for the recombination of carbon monoxide and oxygen to form carbon dioxide for use in carbon dioxide lasers. A thermogravimetric method and a differential scanning calorimetric method have been developed for the thermal characterization of these catalysts. The mass loss data and the enthalpy changes determined as the catalysts lost water were then related to existing activity data for these catalysts. No relationship was found between the thermal data and the …

The Synthesis Of New Maleimide Addition Polymer Precursors, Richard B. Brown

Chemistry & Biochemistry Theses & Dissertations

1H-2,3-dimethylpyrrolo(1,2-a) benzimidazol-l-one (27) and 1H,9H- 2,3,7,8-tetramethyl-bispyrrolo(1,2-a:6,7-a')benzodiimidazo1-1,9-dione (32) have been synthesized from dimethylmaleic anhydride and o-phenylenediamine and 1,2,4,5-tetraaminobenzene, respectively. The presence of reactive olefinic double bonds in the synthesized compounds was of interest as a site for possible addition polymerization.

The synthetic route involved, in both cases, a simple nucleophilic substitution reaction between the diamine(or tetraamine) and the anhydride to form an intermediate amide-acid-amine which rapidly cyclized to the imide amine. The final ring closure required more rigorous conditions and occurred at melt reaction temperatures.