Physical Sciences and Mathematics Commons^™

Inorganic Cesium Lead Mixed Halide Based Perovskite Solar Materials Modified With Functional Silver Iodide, Vincent Obiozo Eze, Lucas Braga Carani, Haimanti Majumder, M. Jasim Uddin, Okenwa Okoli

Chemistry Faculty Publications and Presentations

Inorganic CsPbIBr2 perovskites have recently attracted enormous attention as a viable alternative material for optoelectronic applications due to their higher efficiency, thermal stability, suitable bandgap, and proper optical absorption. However, the CsPbIBr2 perovskite films fabricated using a one-step deposition technique is usually comprised of small grain size with a large number of grain boundaries and compositional defects. In this work, silver iodide (AgI) will be incorporated as an additive into the CsPbIBr2 perovskite precursor solution to prepare the unique perovskite CsI(PbBr2)1-x(AgI)x. The AgI additive in the precursor solution works as a nucleation promoter which will help the perovskite to grow …

Simulation And Improvement Of The Efficiency Of The Cfts Solar Cell Using Scaps-1d, Hardan T. Ghanem Dr., Ayed N. Saleh, Muaamer A. Kamil

Karbala International Journal of Modern Science

A simulation of the AZO/i-ZnO/CdS/CFTS solar cell was carried out using SCAPS software. The results were obtained (Voc=0.55 V, Jsc=6.2 mA/cm², FF=39 %, ɳ=1.35 %). Simulation results were compared with experimental research and we got convergence in the results (Voc=0.56 V, Jsc=6.5 mA/cm², FF=37 %, ɳ=1.37 %). The simulated solar cell is improved by increasing the doping concentration and thickness of the buffer and absorption layers. The efficiency of the solar cell was improved to ɳ=4.29%, fill factor FF=52.92%, open circuit voltage Voc=0.74 V and short circuit current Jsc=10.8 mA/cm²

Structural Tuning Of Two-Dimensional Perovskites At High Pressure, Lauren A. Diloreto

Undergraduate Student Research Internships Conference

Two-Dimensional Perovskites are semiconductors and are of interest to researchers as the class of materials show great promise for innovating improvements to solar cells. The purpose of this experiment is to determine if a metastable change will occur in the materials: DPDAPbI4 and CMA2PbI4 upon compression to approximately 9 GPa. The experiment was conducted using diamond anvil cells (DAC) to apply static pressure to the materials. The pressure of the sample was then measured using ruby fluorescence. Then, FTIR or Raman spectroscopy acquisitions were obtained at various pressures. Subsequently, the data suggests that a metastable change did not occur. Additionally, …

Aspect Ratio Dependent Air Stability Of Pbse Nanorods And Photovoltaic Applications, Demet Asi̇l, Tuğba Haciefendi̇oğlu

Turkish Journal of Chemistry

Development of unique strategies to overcome Shockley-Queisser (SQ) limit in solar cells has gained a great deal of interest. Multiple exciton generation (MEG) process has been considered as one of the best approaches to the SQ limitation. In this respect, PbSe quantum dots (QDs) and nanorods (NRs) have been regarded as promising solar energy harvesting materials owing to their noticeable MEG yields. Although air stability has been regarded as one of the main disadvantage of PbSe QDs, no study has pointed out to the air sensitivity of PbSe NRs yet. Here, we reveal the effect of aspect ratio on air …

Chemical Synthesis Of Nonstoichiometric Nio${}_{X}$ Nanoparticles Using Differentnickel Salts And Application As An Additive Or Interface Layer Inphotovoltaic Devices, Fatma Pinar Choi

Turkish Journal of Physics

The stoichiometric nickel oxide is an insulator while it becomes a p-type semiconductor with the presence of divalent and trivalent states. Here nonstoichiometric nickel oxide nanoparticles (NiO${}_{x}$NPs) were synthesized via a chemical route using two different starter salts; nickel chloride hexahydrate and nickel nitrate hexahydrate. The nanoparticles were investigated by X-ray diffraction and transmission electron microscopy, scanning electron microscopy, to determine the crystal structure, morphology, and particle size. The effect of different nickel salts in the reaction and the formation of NiO${}_{x\ }$nanoparticles were observed for the first time in the literature. Because of the high uniformity and stability, nitrate-based …

Laboratory Experiments To Study The Effect Of Temperature On Cigs Solar Cells, Asliddin Komilov

Acta of Turin Polytechnic University in Tashkent

Abstract - In this work, we studied the effect of temperature on CIGS solar cells as a function of the thickness of the CdS buffer layer. It was found that with an increase in temperature in CIGS-based solar cells (SC), an increase in the acceptor doping concentration occurs in the region where carrier-generation- recombination prevails. It was also established that in solar cells with a thin buffer layer, generationrecombination through interface prevail, and the temperature influences them more.

Powering Advances In Next-Generation Photovoltaics Through Materials Synthesis And Characterization, Christie L.C. Ellis

Doctoral Dissertations

Solar energy is our most abundant natural resource: the energy from sunlight that strikes the Earth in one hour is more than the energy consumed globally in a year. This makes photovoltaics, which convert solar energy into electrical energy, a critical technology to pursue. 95% of the photovoltaic market is dominated by silicon; its high efficiency, stability, and plummeting manufacturing costs made it the clear choice for commercialization. However, silicon solar cells are thick, heavy, opaque, and rigid, limiting potential applications. They are energy- and resource-intensive to produce, and their manufacturing process uses and produces several toxic substances. “Next-generation” photovoltaic …

Photovoltage Enhancement For Stable Perovskite Solar Cells With A Temperature-Controlled Grain Growth Technique, Luis Eduardo Valerio

Open Access Theses & Dissertations

By performing strong characterizations methods, one can begin to fully understand the chemistry and composition behind a great performing perovskite solar cell. Understanding how the interaction between layers inside a solar cell is driven by the temperature and overall environment is a key element to improve the fabrication process and overall efficiency of such cells. This Thesis will present a study of the hybrid organic-inorganic, mixed-cation, mixed-halide, temperature and thickness-controlled perovskite solar cell. A constant power conversion efficiency (PCE) ranging between 15-17% and an open circuit voltage V¬oc above 1.05 V for a wide-band gap perovskite cell is presented.

Investigating New Methods To Develop Perovskite Solar Cells, Amani Hussain Alfaifi

Electronic Theses and Dissertations

Discovering the potential of organic-inorganic metal halide perovskites (MHP) as a harvesting material in solar cells has strongly affected the research direction in solar energy. The fascinating optical and electronic properties offered by MHP combined with tremendous effort from scientists around the world have improved the efficiency to about 25% in a decade.

In the first part of the dissertation, we studied the lamination process as a new fabrication method for producing self-encapsulated perovskite solar cells based on laminating half stacks,as opposed to the conventional layer-by-layer method. Our work focused on optimizing the lamination process of complex triple cations perovskite …

Influence Of Annealing On Photoelectric Characteristics And Stability Of Elements Based On Si-Bi$_{2}$Te$_{3-X}$Se$_{X}$, Gurban Ahmadov

Turkish Journal of Physics

In the manufacture of Bi$_{2}$Te$_{3-x}$Se$_{x}$-based elements using two sources of the deposited substance, they were initially annealed at a temperature of 150-200 \textdegree Ñ in a low vacuum. Heat treatment led to a slight increase in short circuit current and an increase in open circuit voltage. When the elements were heated in high vacuum, as well as in atmospheres of argon, nitrogen, hydrogen, helium and other gases, irreversible changes in the characteristics were not detected. Heat treatment of elements at a temperature of 100--150 \textdegree C in oxygen always improves their performance. It is assumed that annealing stimulates the growth …

Studies Of Initial Growth Of Gan On Inn, Alaa Alnami

Graduate Theses and Dissertations

III-nitride materials have recently attracted much attention for applications in both the microelectronics and optoelectronics. For optoelectronic devices, III-nitride materials with tunable energy band gaps can be used as the active region of devices to enhance the absorption or emission. A such material is indium nitride (InN), which along with gallium nitride (GaN) and aluminum nitride (AlN) embody the very real promise of forming the basis of a broad spectrum, a high efficiency solar cell. One of the remaining complications in incorporating InN into a solar cell design is the effects of the high temperature growth of the GaN crystal …

Investigation Of Structural, Optical And Electronic Properties Of Modified Methylammonium Lead Iodide Perovskites, Rasanjali Jayathissa

Dissertations

Owing to their high-power conversion efficiency (PCE), easy processability, and low fabrication cost, organic lead halide perovskites (OLHP) are emerging as a most promising photovoltaic technology. However, toxicity of lead (Pb) is a major concern for further development. Therefore, it is essential to explore nontoxic metals to replace lead in these materials. In the current research work, nontoxic Mn²⁺, Na⁺ and Ba²⁺ are doped at 1, 5 and 10% mole concentrations to partially substitute Pb²⁺ in methyl ammonium lead iodide (CH₃NH₃PbI₃ or MAPbI₃) perovskite systems, and the effects …

Solar Cells, D. Venkataraman

Science and Engineering Saturday Seminars

Solar cells convert the sun's energy into electrical energy. In this workshop, I will discuss the processes involved in solar cell and various types of solar cells that are being developed as an alternative to silicon solar cells. I will also demonstrate how students can build a solar cell from readily available materials.

Near-Infrared High Efficiency Organic Dye Sensitized Solar Cells (Dscs) And Biological Fluorescent Imaging Dyes, Yanbing Zhang

Electronic Theses and Dissertations

With the energy consumption increase every year, the non-renewable energy sources such as fossil fuels, natural gas, and coal will not sustain forever. In this case, searching for a way to develop a renewable energy source is an emergency. For decades, dye-sensitized solar cells (DSCs) have received intensive attention due to their high power conversion efficiency and low material cost. This dissertation describes efforts to design and synthesize near-infrared organic dyes to apply to two systems: first, for use in the improvement of DSCs by the optimization of electron rich components such as ullazine and cross-conjugated -bridges to increase photon-to-electricity …

Three-Dimensional Nanotube Arrays For Solar Energy Harvesting And Production Of Solar Fuels, Wipula P. R. Liyanage

Doctoral Dissertations

"Over the past decade extensive research has been carried out on photovoltaic semiconductors to provide a solution towards a renewable energy future. Fabricating high-efficiency photovoltaic devices largely rely on nanostructuring the photoabsorber layers due to the ability of improving photoabsorption, photocurrent generation and transport in nanometer scale. Vertically aligned, highly uniform nanorods and nanowire arrays for solar energy conversion have been explored as potential candidates for solar energy conversion and solar-fuel generation owing to their enhanced photoconversion efficiencies.

However, controlled fabrication of nanorod and especially nanotube arrays with uniform size and shape and a pre-determined distribution density is still a …

Nearly Defect-Free Dynamical Models Of Disordered Solids: The Case Of Amorphous Silicon, Raymond Atta-Fynn, Parthapratim Biswas

Faculty Publications

It is widely accepted in the materials modeling community that defect-free realistic networks of amorphous silicon cannot be prepared by quenching from a molten state of silicon using classical or ab initio molecular-dynamics (MD) simulations. In this work, we address this long-standing problem by producing nearly defect-free ultra-large models of amorphous silicon, consisting of up to half a million atoms, using classical MD simulations. The structural, topological, electronic, and vibrational properties of the models are presented and compared with experimental data. A comparison of the models with those obtained from using the modified Wooten-Winer-Weaire bond-switching algorithm shows that the models …

Carbon Nanotube Yarn Based Dye Sensitized Solar Cells With Enhanced Electron/Hole Pair Recombination Prevention Characteristics, Glenn E. Grissom

Theses and Dissertations

Carbon nanotube yarn based solar cells (CNTYSCs) show promise in a variety of applications such as military and smart fabrics. We use a highly aligned and interwoven Carbon nanotube yarn (CNTY) for the working electrode (WE) and counter electrode (CE), to create a flexible super strong, conductive, and photo active surface for the support of a calcined TiO2 nano-solution and macro-solution deposition as a base for added functionalizations of a dye-sensitized solar cell (DSSC) that is able to maintain its flexibility and integrity. The CNT fiber based solar cells have power conversion ability that is independent of the direction of …

Crystal Growth And Surface Modification Of Pyrite For Use As A Photovoltaic Material, Eric Rustad Young

Dissertations and Theses

Pyrite (FeS₂) has recently attracted significant interest as a photovoltaic material due to its promising optical properties, high photon to electron conversion yield, and low-cost raw materials. However, hopes have been tempered by recent discoveries that suggest the presence of hard to remove bulk sulfur defects. This research was focused on engineering and implementing the crystallization of pyrite from a sulfur rich solution to counteract the material's natural tendency to form bulk sulfur defects. Homoeptiaxial layers and single-crystal samples have been grown from tellurium sulfur melts with an Fe:S ratio of 1:4 using both natural and synthetic substrates. …

Bandgap Profiling In Cigs Solar Cells Via Valence Electron Energy-Loss Spectroscopy, Julia I. Deitz, Shankar Karki, Sylvain X. Marsillac, Tyler J. Grassman

Electrical & Computer Engineering Faculty Publications

A robust, reproducible method for the extraction of relative bandgap trends from scanning transmission electron microscopy (STEM) based electron energy-loss spectroscopy (EELS) is described. The effectiveness of the approach is demonstrated by profiling the bandgap through a CuIn_1-xGa_xSe₂ solar cell that possesses intentional Ga/(In + Ga) composition variation. The EELS-determined bandgap profile is compared to the nominal profile calculated from compositional data collected via STEM-based energy dispersive X-ray spectroscopy. The EELS based profile is found to closely track the calculated bandgap trends, with only a small, fixed offset difference. This method, which is particularly advantageous …

Broadband Spectral Splitting Of White Light Via 2d Diffractive Optical Elements, Yalin Başay, Emre Yüce

Turkish Journal of Physics

An effective way of increasing the efficiency of solar cells is to spectrally split sunlight into several frequencies and absorb each frequency using appropriate photovoltaic materials. In this study, we establish a method to show spectral splitting of broadband solar light via iteratively optimized diffractive optical elements. We develop an algorithm in order to calculate 2D holographic patterns that focus two different frequencies to designated positions.

Fundamental Studies Of Chemical Stability And Carrier Process In Hybrid Perovskite Materials, Jue Gong

Graduate Research Theses & Dissertations

This dissertation comprehensively studies the optoelectronic properties of organic-inorganic hybrid perovskites to fundamentally answer their foundations of outstanding performance on solar cells, photodetectors, nanowire lasers and other optoelectronic applications. Specifically, a novel type of charge carrier-lattice interaction was discovered in perovskite methylammonium lead iodide (CH3NH3PbI3), where photoluminescence lifetime of photoinduced carriers is strongly dependent on the rotational frequency of CH3NH3+, as modulated via substitution of hydrogens with deuterium atoms in the organic cation. In addition, two-dimensional Ruddlesden-Popper perovskite (CH3NH3)2Pb(SeCN)2I2 was first synthesized and characterized in the field, and its photoluminescence properties were systematically examined. The existence of intensive photoluminescence peak …

Fabrication And Characterization Of Cuins₂ And Cuinse₂ Light-Absorbing Thin Films For Use In Solar Cells, Amy R. Tapley

Electronic Thesis and Dissertation Repository

Solar energy is free and globally abundant and harnessed cost-effectively, it has the potential to be the world’s main source of energy. CuInGa(S,Se)₂ solar cells have a very high efficiency of 20 %. However, gallium is a rare and expensive element. We have decided to work on its alternative CuInSe₂ (CISe) and CuInS₂ (CIS) by removing gallium or both gallium and selenium. The p-type CISe or CIS light-absorbing semiconducting layer is crucial for this type of solar cell. Preparation methods for CIS and CISe films were developed to reduce the costs and enhance the photoelectrochemical efficiency.

The …

Zr-Doped Tio2 As A Thermostabilizer In Plasmon-Enhanced Dye-Sensitized Solar Cells, Anastasia Pasche, Bernd Grohe, Silvia Mittler, Paul A. Charpentier

Physics and Astronomy Publications

Harvesting solar energy is a promising solution toward meeting the world’s evergrowing energy demand. Dye-sensitized solar cells (DSSCs) are hybrid organic–inorganic solar cells with tremendous potential for commercial application, but they are plagued by in efficiency due to their poor sunlight absorption. Plasmonic silver nanoparticles (AgNPs) have been shown to enhance the absorptive properties of DSSCs, but their plasmonic resonance can cause thermal damage resulting in cell deterioration. Hence, the influence of Zr-doped TiO2 on the efficiency of plasmon-enhanced DSSCs was studied, showing that 5 mol.% Zr-doping of the photoactive TiO2 material can improve the photovoltaic performance of DSSCs by …

Band Offsets At The Interface Between Crystalline And Amorphous Silicon From First Principles, Karol Jarolimek, E. Hazrati, R. A. De Groot, D. A. De Wijs

Center for Applied Energy Research Faculty and Staff Publications

The band offsets between crystalline and hydrogenated amorphous silicon (a−Si∶H) are key parameters governing the charge transport in modern silicon heterojunction solar cells. They are an important input for macroscopic simulators that are used to further optimize the solar cell. Past experimental studies, using x-ray photoelectron spectroscopy (XPS) and capacitance-voltage measurements, have yielded conflicting results on the band offset. Here, we present a computational study on the band offsets. It is based on atomistic models and density-functional theory (DFT). The amorphous part of the interface is obtained by relatively long DFT first-principles molecular-dynamics runs at an elevated temperature …

The Entangled Triplet Pair State In Acene And Heteroacene Materials, Chaw Keong Yong, Andrew J. Musser, Sam L. Bayliss, Steven Lukman, Hiroyuki Tamura, Olga Bubnova, Rawad Hallani, Aurélie Meneau, Roland Resel, Munetaka Maruyama, Shu Hotta, Laura M. Herz, David Beljonne, John E. Anthony, Jenny Clark, Henning Sirringhaus

Chemistry Faculty Publications

Entanglement of states is one of the most surprising and counter-intuitive consequences of quantum mechanics, with potent applications in cryptography and computing. In organic materials, one particularly significant manifestation is the spin-entangled triplet-pair state, which mediates the spin-conserving fission of one spin-0 singlet exciton into two spin-1 triplet excitons. Despite long theoretical and experimental exploration, the nature of the triplet-pair state and inter-triplet interactions have proved elusive. Here we use a range of organic semiconductors that undergo singlet exciton fission to reveal the photophysical properties of entangled triplet-pair states. We find that the triplet pair is bound with respect to …

Design And Fabrication Of Nanostructures For The Enhancement Of Photovoltaic Devices, Richard M. Prevost Iii

University of New Orleans Theses and Dissertations

In 2012 the net world electricity generation was 21.56 trillion kilowatt hours. Photovoltaics only accounted for only 0.1 trillion kilowatt hours, less than 1 % of the total power. Recently there has been a push to convert more energy production to renewable sources. In recent years a great deal of interest has been shown for dye sensitized solar cells. These devices use inexpensive materials and have reported efficiencies approaching 12% in the lab. Here methods have been studied to improve upon these, and other, devices. Different approaches for the addition of gold nanoparticles to TiO₂ films were studied. These …

Configuration And Electronic Properties Of The Interface Between Lead Iodide Hybrid Perovskite And Self-Assembled Monolayers In Solar Cells, Parin Divya Amlani

Browse all Theses and Dissertations

Hybrid perovskite photovoltaic materials are currently the most promising functional materials for solar cell applications with efficiency reaching to those of more conventional materials such as silicon. Using self-assembled monolayers between photovoltaic materials and electrodes is a method for improving the stability and functionality. Recent experiments have shown that using 4-mercaptobenzoic acid and pentafluorobenzenethiol monolayers bridging lead iodide hybrid perovskite photovoltaic materials and electrodes result in improved stability and efficiency. The details of monolayer assembly, molecular adsorption configuration, and resulting modification of electronic properties are important characteristics related to solar cell performance. These characteristics can be obtained through accurate computer …

Fabricating And Characterizing Chalcogenide Thin Films As Light Absorbing Layers In Solar Cells, Daniel Vaccarello

Electronic Thesis and Dissertation Repository

Solar cell development has been a focus in energy research, with light-absorbing layers as the key theme. Copper indium disulphide (CuInS₂) and copper zinc tin sulphide (Cu₂ZnSnS₄ or CZTS) have energy band gaps that are optimal for solar energy conversion. New preparation methods have been developed with practicality, safety, and low costs in mind. The one-pot method developed in this thesis group has been utilized to create nanocrystals that can be used to absorb light and generate current. The use of low temperatures and minimalistic reaction conditions has led to the production of CIS and …

The Effects Of Phosphonic Acids In Dye-Sensitized Solar Cells, Keith Edward James

Dissertations and Theses

Novel methods for the construction of dye-sensitized solar cells (DSSCs) were developed. A thin dense underlayer of TiO₂ was applied on fluorine-doped tin oxide (FTO) glass using as a precursor Tyzor AA-105. Subsequently a mesoporous film of P-25 TiO₂ was applied by spreading a suspension uniformly over the surface of the underlayer and allowing the plate to slowly dry while resting on a level surface. After sintering at 500° C slides were treated with TCPP as a sensitizing dye and assembled into DSSCs. A novel method was used to seal the cells; strips of Parafilm® were used as …

Reflective Efficiencies Of Materials For Applications Of Bifacial Solar Cells, Michael Metter

Senior Theses

The bifacial solar cell is superior to its monofacial predecessor due to its ability to convert both incident light on top and reflected light from below into energy. The scattering of the reflected light is affected by the property of the material on which it is interacting. To date, little work has been contributed to studying the properties of these materials to determine optimal quantities for bifacial solar cells. In the first experiment, reflective efficiencies compared to the angle of reflection were explored for different grit of sandpaper in order to develop an understanding of how surface texture impacts reflectivity. …