Physical Sciences and Mathematics Commons^™

Enhanced Mechanical Strength Of Soybean Oil-Based Non-Isocyanate Polyurethane Adhesive For Wood Application By Introducing Nanofillers, Vatsal Chaudhari

Electronic Theses & Dissertations

Polyurethane (PU) is a versatile material that finds extensive use in various industries including bedding, construction, automotive, and packaging. Historically, this particular polymer relied significantly on petrochemical resources, a practice that was considered to have negative environmental impacts. The conventional method for preparing PU involves the use of isocyanate, which is a disadvantage due to its negative impact on the environment and human health. The resolution of this problem entails identifying an appropriate substitute for petroleum-derived products that minimize their impact on both the environment and human health. The researchers earlier utilized soybean oil, for the formulation of PUs in …

Exploring Soybean Oil-Based Polyol And Effect Of Non-Halogenated Flame Retardants In Rigid Polyurethane Foam, Sahithi Kondaveeti

Electronic Theses & Dissertations

To address the increasing demand for sustainable biomaterials due to the depletion of fossil fuel resources and growing environmental concerns, a new type of biodegradable and environmentally friendly rigid polyurethane foam (RPUF) has been synthesized. These foams are derived from chemically modified soybean oil-based polyol obtained from soybean oil by epoxidation followed by a ring-opening reaction. Polyurethane foam is generally used in construction, furniture, and automobile industries but is highly flammable and releases toxic gases and smoke during combustion. In this study, a highly efficient synergistic effect halogen-free flame-retardant (FR) melamine salt, 2-carboxyethyl(phenyl)phosphinic acid melamine salt (CMA) was synthesized from …

Influence Of Soft Segment Structure, Hydrogen Bonding, And Diisocyanate Symmetry On Morphology And Properties Of Segmented Thermoplastic Polyurethanes And Polyureas, Emel Yilgör, İskender Yilgör

Turkish Journal of Chemistry

A comprehensive review of the structure-morphology-property relations in segmented thermoplastic polyurethanes and polyureas (TPU) is provided. Special emphasis is given to the influence of the soft segment structure, polarity, and molecular weight, diisocyanate symmetry and the nature, extent, and strength of hydrogen bonding on the morphology and thermal and mechanical properties of TPUs. Experimental results obtained on composition-dependent TPU morphology and properties by various techniques were also compared by the morphology profiles generated by computational methods such as quantum mechanical calculations and molecular dynamics simulations

Effect Of Graphene-Based Fillers On The Properties Of Sunflower-Based Polyurethane, Vishwa Suthar

Electronic Theses & Dissertations

Polyurethane market majorly depends on synthetic materials which are noxious. This stimulated an idea to replace petrochemical resources with renewable resources for polyurethane production. Keeping this in mind, this research focused on the use of sunflower oil for the preparation of polyol and its use in polyurethane composition. The reaction mechanism of epoxidation and ring-opening was approached for the conversion of sunflower oil to polyol. During the conversion of sunflower oil, unsaturated groups of sunflower oil were converted into hydroxyl groups of polyol.

Sunflower oil-based polyol was successfully blended with methylene diphenyl diisocyanate (MDI) to form urethane bonds. Confirmative tests …

Using Catalysis To Control The Morphology And Stiffness Of Shape Memory Poly(Isocyanurate-Urethane) (Pir-Pur) Aerogels, A. B.M. Shaheen Ud Doulah, Chandana Mandal, Hojat Majedi Far, Vaibhav A. Edlabadkar, Rushi U. Soni, Stephen Y. Owusu, Nicholas Leventis, Chariklia Sotiriou-Leventis

Chemistry Faculty Research & Creative Works

A large array of anhydrous metal ions were tested as catalysts in the preparation of shape memory poly(isocyanurate-urethane) (PIR-PUR) aerogels from the reaction of 1,3,5-tris(6-isocyanatohexyl)-1,3,5-triazinane-2,4,6-trione (Desmodur N3300A: a well-known isocyanurate-based aliphatic triisocyanate) and triethylene glycol (TEG) in anhydrous acetonitrile. The reaction yielded wet gels that were dried into aerogels in an autoclave with supercritical fluid CO2. The catalytic activity was mostly identified among CH3CN-soluble salts (mainly chlorides) of third-row d-block elements from iron to zinc, group 13 elements from aluminum to thallium, as well as cadmium, bismuth, and tin. Tin (119Sn) NMR indicated that the metal ion complexes with TEG, …

Sunflower Oil-Based Polyol In Flame-Retardant Rigid Polyurethane Foams, Magdalene Asare

Electronic Theses & Dissertations

The current shift from solely depending on petroleum sources to seeking renewable alternatives is due to their fast depletion, spike in prices, and the need to reduce our carbon footprint. For instance, the polyurethane industry currently calls for renewable and less toxic polyols and isocyanates for their synthesis over the traditionally used ones. To tackle an aspect of this matter, this work investigates the generation of polyol from sunflower oil, and further probes their use in rigid foams, one of the widely utilized polyurethanes. Epoxidation and ring-opening reactions were used to convert the sunflower oil into a more reactive form, …

Studies In The Use Of 1,1'-Di(1-Hydroxyethyl)Ferrocene As A Flame Retardant For Polyurethanes, Chanel Yeary

Electronic Theses & Dissertations

Significant research in non-toxic flame retardants (FR) has been performed in recent years since the dangerous consequences of halogenated FR were found. As early as the 1970’s, carcinogenic the side effects of halogenated compounds were being acknowledged. Since the early 2000’s halogenated FRs began being phased out of use due to these negative side effects. Since then, significant research has been exploring alternative effective flame retardants. Ferrocene (Fc) is a promising alternative to halogenated FRs due to its nontoxicity and FR properties. This research will report on the synthesis of 1,1’-di(1-hydoxyethyl) ferrocene (DHEFc) and its incorporation into a polyurethane. A …

Single-Side Polypyrrole Coated Conductive And Flexible Polyurethane Films, Meli̇s Bi̇lal, Esma Sezer, Belkis Ustamehmetoglu

Turkish Journal of Chemistry

In this study, single-side polypyrrole (PPy) coated conductive stretchable polyurethane (PU) / PPy composite films were synthesized by chemical oxidative method in the acetonitrile (ACN)/H₂O interface as a new alternative to two-side coated PU films which have already reported in the literature. One surface of the PU film was contacted with aqueous Py solution and the other surface with cerium ammonium nitrate (CAN) solution in ACN, so that only one surface of the film was coated with PPy and the resulting composite was named PU/PPy (PUP). This composite was characterized by four-point probe conductivity measurement, Fouriertransform infrared spectroscopy …

Environment-Friendly Flame Retardants For Bio-Based Polyurethanes, Felipe Martins De Souza

Electronic Theses & Dissertations

Finding alternative ways to decrease the large consumption of non-renewable resources has been one of the greatest challenges faced by the industry and academia. The trend of using bio-renewable-based materials is an interesting alternative to tackle environmental issues as well as provide economically viable materials. In this work, carvone, an essential oil, was used to synthesize a bio-based polyol through a thiol-ene reaction. The chemical functions were analyzed through Fourier transformed infrared spectrum (FTIR), gel permeation chromatography (GPC), viscosity, and hydroxyl number, which confirmed the synthesis of carvone-based polyol. The latter was then physically blended with three different flame-retardants separately: …

Preparation Of Underwater Quick-Set And Expansion Polyurethane Grouting Material And Its Properties, Yang Zhu, Xue Ren, Wang Jun, Lan Zhili

Coal Geology & Exploration

Quick plugging and dynamic grouting technology under complex geologic conditions in mines is a technical problem in the field of grouting and one of the effective solutions is to develop new chemical grouting materials. Based on the reaction principle of polyurethane materials, we carried out the research and development on production formula of polyurethane grouting materials. By analyzing the polyurethane synthesis reaction temperature and the way of adding reagents as well as conducting contrast experiments on various auxiliaries and additives the best formula for the material was determined. It was found that the grouting material prepared by 4% nano silica …

Uv-Curable Organic-Inorganic Hybrid Polyurethane Coating, Shiyin Yu

Master's Theses and Doctoral Dissertations

This thesis explored a series of organic-inorganic hybrid polyurethane oligomers with varying molecular weights and functional groups (acrylate and/or silane) that were cured with a single ultraviolet (UV) trigger but two photo-initiators. Upon UV irradiation, the free-radical initiator initiated a free-radical reaction for acrylate cross-linking, and the photo-latent base initiated a sol-gel reaction for condensation of the silanes. This study explored the cure extent of both reactions by FTIR for acrylates and silanes and a weight-loss method for silanes as a function of functional group concentration and time. The general film properties were also studied. The results showed that the …

Silylation Of Epoxidized Soybean Oil With Triethoxysilanes, Synthesis And Characterization Of Their Polyurethanes, Aynur Özşeker, Kemal Karadeni̇z, Mustafa Yasi̇n Şen

Turkish Journal of Chemistry

Silylation of epoxidized soybean oil (ESBO) was carried out by epoxy ring opening reaction of methoxy and ethoxy silane compounds. $^{1}$H NMR and FTIR spectra confirmed that two novel bio-based polyols, PSiTh and PSiAm, were obtained through the ring opening of epoxy by the mercapto and amino moieties of MPTMS and APTES, respectively. Polyurethanes of these polyols were prepared using 4,4'- methylene-bis(phenyl isocyanate) (MDI) to incorporate silanol groups into polymer network and were labeled as PUSiTh and PUSiAm, respectively. To see the impact of silanol and phosphorous groups on flame retardant properties, the chain extended polyurethanes, PUSiThCE and PUSiAmCE were …

Nanomorphology Dependent Optical And Mechanical Properties Of Aerogels, Chandana Mandal

Doctoral Dissertations

"Aerogels are very low density, light weight open pore materials. A hypothesis that is under intense current investigation by the scientific community states that the mechanical properties of nanostructured polymers depend on their nanomorphology. Aerogels are nanostructured ultra-lightweight nanoporous materials with skeletal frameworks that can display a wide range of nanomorphologies. Thereby aerogels comprise a suitable platform for testing not only that hypothesis but also a wide range of other properties such as light scattering for applications, for example, in thermally insulating windows.

To study the mechanical properties of nanostructured matter as a function of nanomorphology, various shape-memory polyurethane aerogels …

A Detailed Study Of Novel High-Performance Bromine And Phosphorus Based Reactive Flame Retardants In High-Quality Bio-Polyol Based Rigid Polyurethane Foams, Sanket Bhoyate

Electronic Theses & Dissertations

Structural fire is one of the most catastrophic issues related to human safety observed from reports of National Fire Protection Association of United States in past years. Polyurethanes are one of the important structural material used as thermal insulation in housing. They are also used in automotive, construction, medical, packaging, furniture, thermal, electrical, and vibration insulation. Considering this, we have synthesized bio-based polyurethane foams using limonene-based polyol, isocyanates, and other compounds. Flame retardancy was imparted using reactive flame retardant polyols. Firstly, flame retardancy test was performed on the foams using two novel aliphatic and two novel aromatic bromine-based synthesized reactive …

Castor Oil And Peg-Based Shape Memory Polyurethane Films: Effect Of Chain Extender Amount On Some Polymer Properties And Performance, Ece Gi̇zem Çakmak, Di̇lek Dalgakiran, Fatma Seni̇ha Güner

Turkish Journal of Chemistry

A series of polyurethane (PU) films were synthesized via one-shot bulk polymerization with polyethylene glycol, castor oil, hexamethylene diisocyanate, and 1,4-butanediol (BD) at three different chain extender ratios. Since it was found in our previous study that hard segment content is more effective on shape memory property than soft segment length (Bonfil, M., Sirkecioglu, A., Bingol-Ozakpinar, O., Uras, F., Güner, F. S. J. Appl. Polym. Sci. 2014, 131, 1-12), in this study the effects of BD amount on some physical properties, thermal properties, and shape memory performance of the films were investigated. Shape fixity and shape recovery were achieved under …

The Effect Of Plant Source On Lignin-Based Polyurethanes And The Interdiffusion Dynamics Of Semi-Rigid Polymers, Jason Michael Lang

Masters Theses

The work reported in this thesis increases our understanding of the effect of lignin plant source on the mechanical and morphological properties of lignin-based polyurethanes and the interdiffusion of glassy/liquid bilayer thin films. The interdiffusion of glassy/liquid polymer pairs has received much less attention than liquid/liquid bilayers, leading to conflicting results and unresolved discrepancies. Therefore, the reported study of interdiffusion between polysulfone glassy/liquid polymer layers provides insight into the dynamics of these systems.

This thesis first reports the correlation between the mechanical properties of lignin-based polyurethanes and the lignin plant source. Lignin is a molecule that can be used as …

Biowaste Derived Rigid Polyurethane Foams And Supercapacitors: A Renewable And Sustainable Alternative For Petrochemicals, Charith K. R. Akurana Gamaralalage

Electronic Theses & Dissertations

Bio-based polyol for rigid polyurethane (PU) foams and porous structured carbon as an electrode material for supercapacitors were synthesized from readily available biowaste precursor (orange peel) as an alternative to currently used petroleum-based starting materials. Synthesized bio-based polyols were characterized using FTIR, GPC, hydroxyl number, and viscosity measurements. These analyses indicated that intended bio-based polyol was obtained via thiol-ene chemistry with a high yield. Rigid PU foams prepared from bio-based polyol exhibited density around 35 kg/m³, maintained a regular cell structure with uniform cell distribution, closed cell content over 90%, and excellent compressive strength of ~230 kPa, suggesting …

Use Of Decahydrodecaborate As Flame Retardants In Polyurethanes, Austin W. Bailey

Electronic Theses & Dissertations

There is a growing need for non-halogenated flame retardants due to the toxicity and environmental impacts that are exhibited by current ones. The polyurethane industry is one that has expressed a need for flame retardants in many of its industrial and commercial applications. For these reasons, two different decaborate compounds, tetramethyl and tetrabutyl ammonium decahydrodecaborate, were synthesized and incorporated into polyurethane films for testing. The compounds were characterized using Fourier Transform Infrared (FT-IR) spectroscopy, Proton-Nuclear Magnetic Resonance (¹H-NMR) spectroscopy, Carbon-Nuclear Magnetic Resonance (¹³C-NMR) spectroscopy, and Boron-Nuclear Magnetic Resonance (¹¹B-NMR) spectroscopy. The compounds were incorporated …

Synthesis Of Phosphorus-Containing Polyurethanes And Poly(Urethane-Acrylate)S, Mahi̇r Burak Südemen, Hacer Ayşen Önen

Turkish Journal of Chemistry

Solvent-based polyurethanes and poly(urethane-acrylate)s were synthesized using phosphorus-containing polyester polyols in order to compare the thermal properties of different polymer types. Since the location of the phosphorus group might have vital importance when comparing the thermal properties, phosphorus groups were kept on the pendant chains in poly(urethane-acrylate)s using phosphorus-containing urethane macromonomers while they were kept on the backbone in polyurethanes. The effect of molar mass of polyurethanes and pendant urethane chains of poly(urethane-acrylate)s on thermal properties was also investigated. Characterization of the synthesized polymers was carried out using FT-IR, GPC, NMR, and DSC followed by evaluation of the thermal properties.

Molecular Interpretation Of A Trigger For Controlling An Amine Isocyanate Polyurethane Reaction, Katherine V. Carrasquillo

Masters Theses

The temperature profile needed to complete the reaction between the sodium-diamine complex and the isocyanate terminated prepolymer has been established. The sodium diamine complex has the advantage of blocking the nearly instantaneous reaction between the diamine and isocyanate from taking place until it is released at elevated temperatures. Because of its low melting temperature (~40 °C) and its low molecular weight (low viscosity), this chain extension reaction is not dependent on the participation of the prepolymer. Instead, the rate of reaction is dependent on the dissolution of the 4,4’-methylenedianiline (MDA) complex into the system. The dissolution of the MDA complex …

Strain-Responsive Polyurethane/Pedot:Pss Elastomeric Composite Fibers With High Electrical Conductivity, Mohammad Ziabari Seyedin, Joselito M. Razal, Peter C. Innis, Gordon G. Wallace

Australian Institute for Innovative Materials - Papers

It is a challenge to retain the high stretchability of an elastomer when used in polymer composites. Likewise, the high conductivity of organic conductors is typically compromised when used as filler in composite systems. Here, it is possible to achieve elastomeric fiber composites with high electrical conductivity at relatively low loading of the conductor and, more importantly, to attain mechanical properties that are useful in strain-sensing applications. The preparation of homogenous composite formulations from poly­urethane (PU) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) that are also processable by fiber wet-spinning techniques are systematically evaluated. With increasing PEDOT:PSS loading in the fiber composites, the Young's …

Synthesis Of Polyhedral Oligomeric Silsesquioxane (Poss) Functionalized Carbon Nanotubes For Improved Dispersion In Polyurethane Films, Xiaonan Kou

Dissertations

Carbon nanotube (CNT) polymer nanocomposites are promising advanced materials. These materials exhibit the advantages of traditional polymeric materials, such as being light weight and easy to process, combined with the potential to exhibit enhanced mechanical, thermal and electrical properties compared to pure polymers. To achieve substantial improvement of composite properties at low CNT loading, uniform dispersion of CNTs in the polymer matrix and strong CNT-polymer interfacial interaction are needed. However, it is difficult to achieve adequate dispersion and interfacial interactions due to the inert nature of CNTs. In this project, polyhedral oligomeric silsequioxane (POSS) will be used as a dispersing …

Self-Repairable Polymeric Networks: Synthesis And Network Design, Biswajit Ghosh

Dissertations

This dissertation describes the design, synthesis and development of a new class of polymeric networks that exhibit self-repairing properties under UV exposure. It consists of two parts: (a) modification and synthesis of oxetane (OXE), and oxolane (OXO) substituted chitosan (CHI) macromonomer, and (b) design, and synthesis of self-repairing polyurethane (PUR) networks consisting of modified chitosan. Unmodified CHI consisting of acetamide (-NHCOCH₃), primary hydroxyl (-OH), and amine (-NH₂) functional groups were reacted with OXE or OXO compounds under basic conditions in order to substitute the 1° –OH groups, and at the same time, convert -NHCOCH₃ functionalities …

Development And Extrapolation Of An Undergraduate Laboratory Experiment To An Elastomeric Spinal Muscular Atrophy Brace, Richard Sterling Brose

Master's Theses

Ever since the advent of polymer science, polyurethanes have played a huge role in the industrial world. They have been used in endless applications from furniture padding to aircraft coatings, to binders for insensitive munitions. It is therefore important that the chemistry of polyurethanes is well understood as well as the ability to draw relationships between the raw materials selected and the end-use properties of the polymer. Because of the multitude of practical applications, the development of an undergraduate polymer chemistry laboratory focused on polyurethane elastomers is developed and described herein. Polymer chemistry students are exposed to hydroxyterminated polybutadiene (HTPB) …