Physical Sciences and Mathematics Commons^™

A Model To Predict Concentrations And Uncertainty For Mercury Species In Lakes, Ashley Hendricks

Dissertations, Master's Theses and Master's Reports

To increase understanding of mercury cycling, a seasonal mass balance model was developed to predict mercury concentrations in lakes and fish. Results indicate that seasonality in mercury cycling is significant and is important for a northern latitude lake. Models, when validated, have the potential to be used as an alternative to measurements; models are relatively inexpensive and are not as time intensive. Previously published mercury models have neglected to perform a thorough validation. Model validation allows for regulators to be able to make more informed, confident decisions when using models in water quality management. It is critical to quantify uncertainty; …

Evaluation, Improvement, And Application Of Models Of Environmental Fate And Transport Of Atmosphere-Surface Exchangeable Pollutants (Aseps), Tanvir Khan

Dissertations, Master's Theses and Master's Reports

Certain toxic, semivolatile chemicals, also known as atmosphere-surface exchangeable pollutants (ASEPs) are emitted into the environment from anthropogenic activities and natural sources. This dissertation focused on the (i) evaluation and improvement of dry particle deposition and atmosphere-surface exchange parameterizations of ASEPs for use in chemical transport models (CTMs), and (ii) application of a dynamic multimedia model to examine recovery of Lake Superior from historical inputs of polychlorinated biphenyl (PCB) compounds (a class of ASEPs) contamination.

Current knowledge has been inadequate to propose quantitative measures of the relative performance of available dry particle deposition parameterizations. In Chapter 1 of this dissertation, …

Investigation Of Mercury Use, Release, Deposition, And Exposures In The Tampa Bay Area, Ryan Algernon Michael

USF Tampa Graduate Theses and Dissertations

I investigate the links between mercury use, release, deposition, and population exposure in Tampa Bay, with the focus of identifying levers for reducing population mercury exposures. To achieve this, I investigated the trends in mercury use and release by products and processes in the Tampa Bay area using a Material Flow Analysis. Analysis of USEPA National Emissions Inventory data over time (1999 - 2008) identified relevant air source emission categories, and explored and compared state and regional trends in mercury emissions. To understand source contributions to wet deposited mercury in the Tampa Bay area, I analyzed trends in mercury deposition …

Slides: Drilling Waste, Blake Scott

Opportunities and Obstacles to Reducing the Environmental Footprint of Natural Gas Development in Uintah Basin (October 14)

Presenter: Blake Scott, Scott Environmental Services, Inc.

24 slides

Slides: Environmentally Friendly Drilling Systems Program (Efd), Rich Haut

Best Practices for Community and Environmental Protection (October 14)

Presenter: Rich Haut, Houston Advanced Research Center

23 slides

An Investigation Of The Sintering Of Iron-Wire Compacts, George L. Vivian

Bachelors Theses and Reports, 1928 - 1970

A study of the sintering of iron has been made by observing the rate of bonding of iron wires wound on iron spools. The specimens were sintered at a constant temperature of 850c in vacuum furnaces capable of producing pressures of 10-5 to 10-4 mm of mercury, and the growth of the bond between wires was observed as a function of time.

It has been concluded that the volume-diffusion mechanism is strongly operating in the sintering of iron at 850c, but in an evacuated system, the evaporation-condensation mechanism also contributes to the sintering process.

Electrowinning With Amalgam Electrode, Ralph V. Anderson Jr.

Bachelors Theses and Reports, 1928 - 1970

Amalgam Metallurgy, a relatively new expression in the technology of metal extraction, was first chosen to describe certain new processes developed at the Duisburg Copper Works in Germany. The idea of using mercury, a costly and poisonous metal, as an intermediate in heavy chemical industry and in polarography are of recent origin; with the exception of a series of patents of little signif­icance and occasional comments in the literature, the work is hardly known.

Polarographic Analysis Applied To Metallurgical Solutions And Products, Donald W. Johnson

Bachelors Theses and Reports, 1928 - 1970

The polarograph has been applied to a large number of chemical and metallurgical analyses, and is especially applicable to solution control analysis and to the deter­mination of minute quantities of ions in the presence of large amounts of other ions.

Determination Of The Activities Of Indium And Mercury And The Vapor Pressures Of Mercury Over These Amalgams From 0.00216 To 0.02494 Mole Fraction Indium At 25 C And From 0.00067 To 0.02410 Mole Fraction Indium At 70 C By Electromotive Force Measurements, Arthur H. Lutts

Bachelors Theses and Reports, 1928 - 1970

This work was performed to determine by experimental means the activities of both indium and mercury and the vapor pressures of mercury over these amalgams at 25 and 70 C.

An Investigation Of The Gallium-Indium Binary System, Allen D. Kennedy

Bachelors Theses and Reports, 1928 - 1970

Twenty-four alloys, at 5 weight per cent or smaller intervals, were investigated by the thermal method. Very low temperatures had to be attained, because most of the alloy melts supercooled remarkably. Analysis showed only a liquidus and solidus line, and the solidus temperature was the same for each alloy.

The Alloys Of Gallium And Indium, C. J. Adams

Bachelors Theses and Reports, 1928 - 1970

Thermal analysis VIPS used to construct cooling and heating curves from which the phase diagram was determined. The data for the entire set of cooling curves were obtained by the use of mercury thermo­meters.

The Determination Of Aluminum In The Presence Of Manganese And Iron By The Use Of A Mercury Cathode, William R. Opie

Bachelors Theses and Reports, 1928 - 1970

Since 1880, when Wolcott Gibbs made the suggestion that mercury could be used as a cathode in gravimetric electroanalysis, many articles have appeared in literature either criticizing the method or citing successful results which have been obtained by it.

Some Investigations On Quantitative Measurement Of Amalgamation, Charles Moore

Bachelors Theses and Reports, 1928 - 1970

Amalgamation is a process in which precious metals are collected by mercury. The exact way in which the mercury holds the other metals is not positively known. It is proba­ble that a series of intermetallic compounds form. Very little work has been done so far on the theory of amalgama­tion.

The Quantitve Measurement Of Amalgamation, Robert A. Mcguire

Bachelors Theses and Reports, 1928 - 1970

Mercury has been known since ancient times. In fact, one mine, the "Almaden" in Spain, has been worked continuously since Roman times. It has been used during all this time for the recovery of free gold from gold concentrates, and from black sand and galena in concentrates from placer work.

The Effects Of Lime On The Amalgamation Of Gold., Rollien R. Wells

Bachelors Theses and Reports, 1928 - 1970

An amalgam is an alloy of mercury with other metals, and amalgamation is the art of making or forming amalgams. In metallurgical language the word is limited to the means adopted for the recovery of gold and silver from their ores by the use of mercury.

A Metallurgical Study Of Gold Ores, Alfred A. Bloom

Bachelors Theses and Reports, 1928 - 1970

Gold is widely distributed in the earth's crust in small quantities. Gold is found in nature in two forms; the element itself and the compound gold telluride. In all cases, silver in some proportion is an alloying constituent.