Physical Sciences and Mathematics Commons^™

Towards Carbon Dioxide Reduction: Synthesis And Characterization Of Ccc-Nhc Pincer Iron Complexes., Joshua Mensah

Theses and Dissertations

The industrial revolution came with its downside of emission of greenhouse gases into the atmosphere. The NOAA reported in 2019 that, of the greenhouse gases emitted into the atmosphere, CO2 contributed to about 80% of the increased greenhouse gases hence the need for CO2 Sequestering and Storage (CSS) and ultimately leading to Carbon Capture and Recycling (CCR) as a viable option to convert CO2 into useful forms. The race to find the best catalyst for CCR has led to the synthesis of many organometallic compounds. Pincer complexes catalyzed CO2 reduction has gained notoriety recently because of the tunability and robustness …

Gis And Genetic Diversity- Case Studies In Stylosanthes, P G. Jones, M C. Sawkins, B L. Maass, P C. Kerridge

IGC Proceedings (1997-2023)

We present a new technique for mapping the potential occurrence of wild germplasm based in climate data and show its application to six important Stylosanthes species. The method can be used to develop hypotheses as to the distribution for purposes of collection and/or in situ conservation. It can also be used to investigate genetic diversity with a species. We present some first results based in isozyme data from S. guianensis.

Characterization Of Carbon Nanotube/Polystyrene Composites Prepared Via Microwave-Induced Polymerization, Hubert Agamasu

Electronic Theses and Dissertations

Carbon nanotubes (CNTs), with their excellent mechanical properties, are well suited to the production of composites with good strength-to-weight ratio. However, the use of nanotubes as reinforcement is hampered by the lack of interaction between their inert surfaces and matrices. This, coupled with the van der Waal’s interactions between individual nanotubes, leads to agglomeration of CNTs in media. Functionalization is an efficient means to disperse nanotubes as well as increase their reactivity. The irradiation of CNTs with microwaves generates instantaneous, localized heating, being used in this work to trigger the rapid, thermal, free radical polymerization of styrene. Under microwaves, olefin-functionalized …

Multiple Structural And Functional Annotations Based In-Silico Characterization Of Q9brx8 Protein, Eiman Zahid, Muhammad Farhan Sarwar

Karbala International Journal of Modern Science

Numerous proteins found in humans are poorly understood because there is a dearth of experimental evidence. Hypothetical proteins (HPs) or uncharacterized proteins are the terms used to describe these proteins. In this work, one of these proteins, Q9BRX8, is investigated using in-silico or bioinformatics tools to reveal its significant properties. In this regard, NCBI for the sequence retrieval, ProtParam tool for analysis of physiochemical properties, SOPMA for secondary structure prediction, SWISS-Model for homology modelling, STRING for protein-protein interaction and HDOCK for protein-protein docking analysis among other tools, were incorporated. The physiochemical characteristics indicated that Q9BRX8, which has an instability score …

Thermal, Magnetic, And Electrical Properties Of Thin Films And Nanostructures: From Magnetic Insulators To Organic Thermoelectrics, Michael J. M. Roos

Electronic Theses and Dissertations

Modern fabrication and growth techniques allow for the development of increasingly smaller and more complex solid state structures, the characterization of which require highly specialized measurement platforms. In this dissertation I present the development of techniques and instrumentation used in magnetic, thermal, and electrical property measurements of thin films and nanostructures. The understanding of trapped-flux induced artifacts in SQUID magnetometry of large paramagnetic substrates allows for the resolution of increasingly small moments. Using these methods, the antiferromagnetic coupling of the interface between a Y₃Fe₅O₁₂ film and Gd₃Ga₅O₁₂substrate is quantitatively …

The Characterization Of Atmospheric Turbulence And Its Effect On Laser Beam Propagation, Michael Cox

All Theses

Having a controlled environment to measure atmospheric turbulence is essential to understanding its effects on different laser beam characteristics. The Clemson Variable Turbulence Generator (VTG) has the capability to propagate a laser beam up to 100 m and be able to dial many turbulence settings up to a heat flux of 357 W/m². A high-speed camera, power detector, and high-resolution temperature probes characterize the VTG with theoretical turbulence spectrums. The exponent associated with the Rayleigh-Bénard (RB) temperature structure constant equation is studied. Two different laser beam profiles are used throughout this work: Gaussian and Asymmetric Perfect Vortex (APV). …

Characterization Of Particulate Size Distributions And Water-Soluble Ions Measured At A Broiler Farm, P. J. Silva, T. Cress, R. Drover, C. Michael, G. Docekal, P. Larkin, A. Godoy, D. A. Cavero, C. Sin, J. Waites, Rezaul Mamood, M. Cohron, K. L. Purvis-Roberts

School of Natural Resources: Documents and Reviews

No abstract provided.

Exposure Of Candyland Red Tomatoes (¬Solanum Lycopersicum L.) To Various Metal Oxide Nanomaterials: Full Life Cycle And Assessment Of Fruit Quality, Jesus Manuel Cantu

Open Access Theses & Dissertations

The use of nanotechnology in agriculture has attained high interest to enhance crop production due to their unique properties. Moreover, metal oxide nanomaterials can potentially supplement nutrients, enhance plant growth, and crop production. When investigating fruits' nutritional quality, carbohydrates and phytonutrients (bioactive compounds) play important roles. Therefore, it is important to understand how nanomaterials will affect the quality of tomato fruits. In this dissertation, various metal oxides were synthesized and applied to Candyland Red tomato seedlings to assess the plant growth and tomato production. In the first investigation, Candyland Red tomatoes (Solanum lycopersicum) were exposed to synthesized pristine CuO and …

Isolation And Characterization Of Extracellular Vesicles From Various Biological Matrices Using Capillary-Channeled Polymer (C-Cp) Fiber Solid-Phase Extraction Spin-Down Tips, Kaylan Jackson

All Dissertations

A number of recent works have emphasized the need to isolate nanometer-scale analytes, like extracellular vesicles (EVs), from various biologically-relevant fluids. Exosomes are a subset of small EVs that range from 30-200 nm in diameter that serve as biomolecular snapshots of their cell of origin containing mother cell-specific DNA, miRNA, mRNA, and proteins. As critical components of intercellular communication, exosomes and other EVs play significant roles in many physiological and pathological processes. Diverse populations of these vesicles can be collected from biofluids, including blood, saliva, and urine, from cell culture conditioned media and primary cells, and even from plant …

Ultrasmall Nanodiamonds: Perspectives And Questions, Shery L.Y. Chang, Philipp Reineck, Anke Krueger, Vadym Mochalin

Chemistry Faculty Research & Creative Works

Nanodiamonds are at the heart of a plethora of emerging applications in areas ranging from nanocomposites and tribology to nanomedicine and quantum sensing. The development of alternative synthesis methods, a better understanding, and the availability of ultrasmall nanodiamonds of less than 3 nm size with a precisely engineered composition, including the particle surface and atomic defects in the diamond crystal lattice, would mark a leap forward for many existing and future applications. Yet today, we are unable to accurately control nanodiamond composition at the atomic scale, nor can we reliably create and isolate particles in this size range. In this …

Plant Protein-Based Nanocomposite Films: A Review On The Used Nanomaterials, Characteristics, And Food Packaging Applications, Shima Jafarzadeh, Mehrdad Forough, Sajed Amjadi, Vahid J. Javan Kouzegaran, Hadi Almasi, Farhad Garavand, Masoumeh Zargar

Research outputs 2022 to 2026

Consumer demands to utilize environmentally friendly packaging have led researchers to develop packaging materials from naturally derived resources. In recent years, plant protein-based films as a replacement for synthetic plastics have attracted the attention of the global food packaging industry due to their biodegradability and unique properties. Biopolymer-based films need a filler to show improved packaging properties. One of the latest strategies introduced to food packaging technology is the production of nanocomposite films which are multiphase materials containing a filler with at least one dimension less than 100 nm. This review provides the recent findings on plant-based protein films as …

Efficient Removal Of Common Organic Pollutants From Water By Zn-Doped Tio2 Nanoparticles With Different Applications, Khaled Elgendy, Ibrahim Elmehasseb, Saleh Kandil

Karbala International Journal of Modern Science

Water purification via adsorption without energy consumption was considered a green process. Zn-doped TiO2 nanoparticles were fabricated by the Sol-gel method and characterized by different analysis techniques. Zinc doping of TiO2 increases the surface area to 26.7m2g-1 with adsorption results, 75.1%, 71.1%, and 68.2% for methylene blue, ofloxacin, and SLS, respectively. Variable affecting factors on adsorption have been studied. The adsorption behavior fitted with Langmuir and Freundlich equations than Temkin isotherm, indicating the preferred heterogeneous adsorption at equivalent adsorbent sites. The application of nanoparticles in many synthetic specimens of pollutants gave excellent removal results, which exceeded 75% of detoxification.

The Dissolution And Recovery Of Critical Materials (Li2co3 And Uf6) From Ionic Liquid, Cassara Higgins

UNLV Theses, Dissertations, Professional Papers, and Capstones

Lithium and uranium are critical materials in both the energy industry and for national security. Lithium is necessary for the next generation of batteries and 6Li is valuable for the production of tritium necessary for both fusion energy and to maintain our nuclear stockpiles. Uranium is a fuel source or precursor fuel source for commercially operating nuclear fission power. The monitoring of uranium hexafluoride (UF6) enrichment at foreign facilities is important for the monitoring of nuclear safeguards and enforcement of non-proliferation treaties. Recovery methods for lithium at the end of life of batteries are necessary to ensure abundance of the …

Synthesis, Characterization And Activity Of Palladium Catalysts On The Dual Support Of Cerium And Aluminum Oxides, Jihyeon Park

Theses and Dissertations

The effects of sequence of impregnation (Pd on cerium oxides -alumina and cerium oxides on Pd-alumina) and calcination temperature (500 ℃ and 850 ℃) on the catalytic oxidation of methane under lean conditions were investigated. The catalysts were prepared by a combination of impregnation, slurry and vortexing methods. The catalysts had 4.7 wt.% Pd and 10.7 wt.% Ce based on inductively coupled plasma optical emission spectrometry (ICP-OES) analysis. The catalysts were characterized by pulse chemisorption, temperature programmed reduction (TPD), scanning transmission electron microscopy (STEM), and X-ray photoelectron spectroscopy (XPS). The activity of the catalysts for methane combustion was measured in …

Infrared Investigation Of Lithium Ion Electrolytes: Characterization Of Structure And Dynamics Via Linear And Nonlinear Spectroscopy, Jeramie Christopher Rushing

LSU Doctoral Dissertations

Lithium ion batteries are widely employed in energy storage, but the connection between the molecular interactions in their electrolytes and the macroscopic properties remains elusive. Across three vastly different electrolytes, speciation and dynamics were studied via linear and nonlinear infrared spectroscopy to shed light on this relationship. The impact of mixed solvation on ionic speciation was studied from the perspective of the anion, which revealed a significant energetic favorability for the formation of contact ion pairs in linear carbonate solvents over cyclic carbonates. Infrared spectroscopy and density functional theory calculations described a complete inversion of the speciation due to solvent …

Synthesis And Advanced Characterization Of Energy Materials, Erik Sarnello

Graduate Research Theses & Dissertations

Catalysts are used in an extremely broad range of systems including everything from biological systems to industrial processes. An ideal catalyst offers robust stability and high activity. This work focuses on the synthesis and characterization of materials that show promise in the field of catalysis. Advanced synchrotron characterization techniques and unique experimental design are highlighted to provide foundation work that will provide the necessary information to aid in designing and fabricating catalytic materials. Supported metal nanoparticle (SMN) catalysts are enormously crucial for many catalytic applications. However, catalyst deactivation, caused by sintering and coke formation, is a ubiquitous problem that significantly …

Catalytic Activity Of Ethylbenzene With Product Selectivity By Gold Nanoparticlessupported On Zinc Oxide, Afiq Anwar, Azman Ma'amor, H.N.M. Ekramul Mahmud, Wan Jefrey Basirun, Iskandar Abdullah

Turkish Journal of Chemistry

The oxidation of ethylbenzene (EB) using tert-butyl hydroperoxide as the oxidizing agent was carried out in presence of gold nanoparticles (3 nm) supported on zinc oxide in acetonitrile solution. A higher selectivity towards acetophenone (ACP) as the major product, and a moderate selectivity towards other products such as 1-phenylethanol (PE), benzaldehyde (BZL), and benzoic acid (BzA) were observed using the prepared Au/ZnO nanocatalysts at 100 °C for 24 h. It is suggested the reaction produces an intermediate product, which is dimethylethyl-1-phenylethyl peroxide through a radical mechanism. A small amount of benzaldehyde was observed because benzaldehyde went autoxidation to form benzoic …

Characterization Of Nanoparticles Using Inductively-Coupled Plasma Mass Spectrometry, Jabez D. Campbell

MSU Graduate Theses

Nanomaterials are a relatively new class of materials that have many applications which span a wide host of fields from medical products to consumer products. The possible compositions and forms of nanomaterials are just as varied as the applications. Therefore, a versatile characterization method is needed for researchers and regulators alike to ensure nanomaterials are properly used. Single Particle Inductively Coupled Plasma Mass Spectrometry (SP-ICP-MS) is a functional method that could fill the characterization need in the nanomaterial research field. Using data from both SP-ICP-MS tests and data from literature established characterization methods, the viability of making SP-ICP-MS the standard …

Development And Characterization Of An Underwater Acoustics Laboratory Via In Situ Impedance Boundary Measurements, Cameron Taylor Vongsawad

Theses and Dissertations

Modeling underwater acoustic propagation comes with a variety of challenges due to the need for proper characterization of the environmental conditions. These conditions include ever changing and complex water properties as well as boundary conditions. The BYU underwater acoustics open-air tank test-bed and measurement chain were developed to study underwater acoustic propagation within a controlled environment. It was also developed to provide ways to test and validate ocean models without the high cost associated with obtaining open ocean measurements. However, tank measurements require additional characterization of boundary conditions associated with the walls of the tank which would not be present …

Advances In Modeling Gas Adsorption In Porous Materials For The Characterization Applications, Max A. Maximov

Dissertations

The dissertation studies methods for mesoporous materials characterization using adsorption at various levels of scale and complexity. It starts with the topic introduction, necessary notations and definitions, recognized standards, and a literature review.

Synthesis of novel materials requires tailoring of the characterization methods and their thorough testing. The second chapter presents a nitrogen adsorption characterization study for silica colloidal crystals (synthetic opals). These materials have cage-like pores in the range of tens of nanometers. The adsorption model can be described within a macroscopic approach, based on the Derjaguin-Broekhoff-de Boer (DBdB) theory of capillary condensation. A kernel of theoretical isotherms is …

The Design And Characterization Of Advanced Li Metal Anodes For Next-Generation Batteries, Keegan R. Adair

Electronic Thesis and Dissertation Repository

Li metal batteries have been widely regarded as the next stage of energy storage technology, which is enabled by the low electrochemical potential (-3.04 V vs. the standard hydrogen electrode) and high specific capacity (3860 mAh g^-1) of the Li metal anode. However, the implementation of Li metal anodes has been hindered by several issues including parasitic side reactions with electrolyte, large volume fluctuations, and dendrite formation which can cause short-circuits and safety issues. This thesis will cover some novel Li anode stabilization strategies while using advanced characterization techniques to provide critical information on the working mechanisms of …

Synthesis And Characterization Of Novel Organic Ligands With Their Complexes Of Platinum, Copper And Uranium, Mustafa Adnan Yasin Aldulaimi

Dissertations

Transition metal complexes of symmetrical and asymmetrical Schiff bases have played a significant role in the field of coordination, inorganic, and bioinorganic chemistry as models for biological, analytical, industrial, and pharmaceutical applications. Over recent years a great deal of interest has developed in new transition metal complexes of Schiff base ligand. The preparation of novel organic ligands is the most important step in the development of metal complexes that exhibit unique properties and novel reactivity. To highlight the presentation of this dissertation and to provide more detailed investigations, the dissertation was separated into six chapters according to the sequence of …

Synthesis And Characterization Of Functiona Materials For 3d Printed Composites, Elizabeth Irene Reza

Open Access Theses & Dissertations

The following body of work encompasses the synThesis, upscaling, additive manufacturing, and characterization of microspheres as functional fillers incorporated into polymer syntactic foams. Synthesizing microspheres permits control over morphology, dispersion of particles, and size while the use of direct write manufacturing allowed for the controllability of filler orientation. Two different syntactic foams were developed from similar methodologies: (1) a silicone syntactic foam (2) epoxy syntactic foam. The silicone epoxy foam showed an increasing in damping and elastic modulus. The epoxy syntactic foams showed an enhanced thermal and electrical properties.

Nitro Group Reduction For Use In Organic, Cathodic Materials, Brock G. Goeden

Honors Thesis

The industrial demand for higher capacity, light-weight battery materials has skyrocketed in recent years due to heavy investments in portable electronics, electronic vehicles, and renewable energy sources. However, rechargeable battery technology has seen little improvement since the invention of the Lithium-Ion battery in the 1980s. The low energy density of the traditionally utilized LiCoO2 cathodic material (specific capacity: 272 mAh g-1), has limited its potential to meet these increasing demands. To solve this problem, our research group is investigating new types of lightweight, organic, polymeric materials with conductive backbones as a possible replacement for the cathodic materials in Lithium-Ion batteries. …

Fabrication Of Metal-Silicon Nanostructures By Reactive Laser Ablation In Liquid, Eric J. Broadhead

Theses and Dissertations

Metal-silicon nanostructures are a growing area of research due to their applications in multiple fields such as biosensing and catalysis. In addition, silicon can provide strong support effects to metal nanoparticles while being more cost effective than traditionally used supports, like titania. Traditional wet-chemical methods are capable of synthesizing metal-silicon nanostructures with a variety of composition and nanoparticle shapes, but they often require high temperatures, toxic solvents, strong reducing agents, or need capping agents added to stabilize the nanoparticles. Laser processing is an emerging technique capable of synthesizing metal-silicon composite surfaces that offers a faster, simpler, and greener synthesis route …

Analysis Of Titanium Dioxide Nanoparticles In Foods Using Raman Spectroscopic Techniques, Janamkumar Pandya

Doctoral Dissertations

Titanium dioxide (TiO2) and its nanoparticles (NPs) are widely used in various applications. Recently, the presence of TiO2 NPs in food and consumer products raised safety concerns to human health and the environment. The goal of this project is to explore the capability of Raman Spectroscopy in the analysis of TiO2-NPs and apply this technique for the analysis of TiO2-NPs in food and environmental samples. Two approaches, i.e. the ligand-based and the mapping-based, were evaluated. The ligand-based approach utilized the surface enhanced Raman scattering (SERS) property of the TiO2 NPs as a substrate to enhance the signal of a surface …

Three-Dimensional (3d) Characterization Of The Middle Ordoovician (Darriwilian) Strata In The Southern Great Basin, Western United States, Uday Mohamed Baheej Kara Ali

UNLV Theses, Dissertations, Professional Papers, and Capstones

Carbonates are mostly produced in shallow-marine environments and their deposition is sensitive to water depth changes on carbonate platforms. The water depth in depositional environments of a particular carbonate platform is controlled by the interplay of eustatic sea-level change, tectonic subsidence, platform morphology, and depositional rate. Due to the morphological variations of carbonate platforms in different tectonic settings, facies distribution across carbonate platforms varies significantly even during a single eustatic sea-level cycle. Carbonate platforms developed on passive continental margins are thought to be the most stable platforms and their facies distribution is commonly taken as examples in textbook depositional models. …

Phenotypic Variability Of Cenchrus Ciliaris L. Germplasm In Field Gene Bank, C. S. Shantharaja, R. K. Bhatt, M. P. Rajora

IGC Proceedings (1997-2023)

The world faces a continual need to increase forage crop productivity, and to develop new varieties more adapted to changing environmental and biological challenges, and evolving needs of Local communities. One of the main reasons for under-utilization of germplasm, according to curators, breeders and other users of plant genetic resources, is the lack of adequate passport, characterization and evaluation data (Biodiversity International, 2007). Buffel grass (Cenchrus ciliaris L.) is a C₄ perennial grass of arid lands distributed over hotter and drier parts of India, Mediterranean region and tropical and southern Africa. This forage grass is under the focus …

On Characterizing Quantum Processes And Detectors, Kevin Valson Jacob

LSU Doctoral Dissertations

In 2009, physicists at the National Institute of Standards and Technology in Colorado, Boulder developed what could arguable be called the first rudimentary quantum computer [1]. The past decade has seen unprecedented improvements in quantum information science culminating in the demonstration of quantum supremacy --- that quantum computers can solve problems that are impractical to be solved on the best supercomputers [2]. This remarkable progress necessitates the development of techniques to characterize the quantum devices that are being developed. In my thesis, I will focus on such devices that manipulate and detect light.

In Chapter 1, I will introduce the …

Size-Controlled Synthesis Of Nickel Nanoparticles Enclosed In Carbon Nanocages, Felicity Peebles, Grigorii Rudakov, Gamini U. Sumanasekera

Undergraduate Arts and Research Showcase

We have demonstrated a simple, scalable, and tunable method of obtaining densely packed Ni Nanoparticles encapsulated in Carbon Nanocages (Ni@CNCs). Using a facile method, it was shown that via a simple annealing process of precursor based on nickel acetate and citric acid, Ni@CNCs with sizes varying from 5 to 20 nm can be synthesized by changing the heating ramp rate during the synthesis from 25 to 53 °C/min. The final temperature of 600 °C was held for 10 min, and was the same for all the samples. X-Ray Diffraction (XRD) multiple peaks analysis was performed to show large Ni nanoparticles …