Physical Sciences and Mathematics Commons^™

Effects Of Electron Beam Irradiation On Crmnv And Crmntiv High Entropy Alloys: Nano-Mechanical, Structural, And Thermodynamic Perspectives, N. A. Sultana, Y. S. Mohammed, S. J. Pendleton, J. Vennekate, G. Ciovati, X. Li, H. Baumgart, A. A. Elmustafa

Mechanical & Aerospace Engineering Faculty Publications

Beam exit windows are crucial components of any particle accelerator as they provide an interface between the beamline vacuum and target material at atmospheric media. For high beam power machines, special materials and designs are required to withstand high radiation and mechanical loads, while minimizing energy loss during transition and maximizing window lifetime. This research investigates the impact of electron beam exposure to bulk CrMnV and CrMnTiV high entropy alloys (HEAs) with the primary goal of identifying suitable candidate materials for the design of robust and durable exit window settings. The selection criteria include intrinsic characteristics, power dissipation, and mechanical …

Scanning Tunneling Spectroscopy Of Homooligonucleotides, T. Sharipov, R. Garafutdinov, A. Mishra, S. Santer, R. Shaikhitdinov, M. Balapanov, R. Bakhtizin

Eurasian Journal of Physics and Functional Materials

Short single-stranded DNA molecules of two types, consisting of dC nucleotides only or dA nucleotides only, were immobilized onto the surface of mica and silver substrates and studied by scanning probe microscopy methods. Geometric dimensions of the studied objects were determined. The currentvoltage curves of d(A)12 and d(C)12 oligonucleotides were measured. Their differential electrical resistances were estimated and compared with each other.

Synthesis And Characterization Of Porphyrin-Encapsulated Nanoparticles: Investigations With Scanning Probe Microscopy, Olajumoke Helen Olubowale

LSU Doctoral Dissertations

Scanning probe microscopy (SPM) encompasses a family of surface measurements that use a sharp probe to “feel” a surface. The tip is scanned point-by-point to build a map of the sample topography, which can be correlated with local measurements of surface properties. This dissertation outlines the history of SPM and describes techniques, operational modes, and applications. A review of force volume mapping (FVM), a 3D characterization mode of SPM used to map material properties detailed. Force volume mapping can be achieved by measuring multiple force measurements point-by-point in a grid pattern. Local properties such as chemical forces, dielectric properties, nanomechanical …

Electromechanical Coupling In Collagen Measured Under Increasing Relative Humidity, Arwa Bazaid, Fengyuan Zhang, Qiancheng Zhang, Sabine Neumayer, Denise Denning, Stefan Habelitz, Ana Marina Ferreira, Brian J. Rodriguez

Articles

The functional role of collagen piezoelectricity has been under debate since the discovery of piezoelectricity in bone in 1957. The possibility that piezoelectricity plays a role in bone remodelling has generated interest in the investigation of this effect in relevant physiological conditions; however, there are conflicting reports as to whether collagen is piezoelectric in a humid environment. In macroscale measurements, the piezoelectricity in hydrated tendon has been shown to be insignificant compared to dehydrated tendon, whereas, at the nanoscale, the piezoelectric effect has been observed in both dry and wet bone using piezo response force microscopy (PFM). In this work, …

Investigation Of Early Complex Formation Of Huntingtin Protein With And Without Lipids, Alyssa R. Stonebraker

Graduate Theses, Dissertations, and Problem Reports

Huntington’s disease (HD) is a fatal neurodegenerative disease caused by the expansion of the polyglutamine (polyQ) domain of the huntingtin protein (htt). The expansion of the polyQ domain beyond a threshold of approximately 35 repeats triggers complex toxic aggregation mechanisms and results in altered interactions between htt and lipid membranes. Many factors modulate these processes. One such modulator includes sequences flanking the polyQ domain, most notably the first 17 amino acids at the N-terminus of the protein (Nt17), and environmental factors including the presence of membranous structures. Nt17 has the propensity to form an amphipathic a-helix in the presence of …

Fabrication And Characterisation Of Large Area, Uniform And Controllable Surface Relief Patterns In Photopolymer Material, Owen Kearney, Izabela Naydenova

Conference Papers

As the risk of antibiotic resistant pathogens increases, development of convenient point of care devices is essential. Such devices would help avoid infection – ensure cleanliness of environments and assist in bacteria analysis. The ultimate aim of the research presented here is to develop a compact, cost effective, easy to use optical device which is capable of detecting and quantifying bacteria in an aqueous sample. The surface relief patterns have a dual role, they provide a diffracted light signal, and control the adhesion of the bacteria to the surface. The strength of the diffracted signal is expected to provide a …

Exogenous Factors That Impact Huntingtin Aggregation, Adam Skeens

Graduate Theses, Dissertations, and Problem Reports

While expansion of a polyglutamine (polyQ) domain is the immediate cause of huntingtin (htt) aggregation associated with Huntington’s Disease (HD), other cellular factors modify aggregation. These include interactions with cellular membranes, protein biding partners, molecular crowding, and proteinaceous seeds. Here, two important factors are biophysically characterized: 1) the interaction of htt with endomembranes and 2) proteinaceous seeds obtained from a variety of htt-derived peptides. In the first project, the aggregation of htt at bilayer interfaces and in the presence of divalent cations was investigated. A major cellular factor implicated in altered htt aggregation is the binding of lipids. Furthermore, the …

Membrane Elasticity Modulated By Cholesterol In Model Of Porcine Eye Lens-Lipid Membrane, Nawal K. Khadka, Max-Florian Mortimer, Mason Marosvari, Raju Timsina, Laxman Mainali

Physics Faculty Publications and Presentations

Experimental evidence shows that the eye lens loses its elasticity dramatically with age. It has also been reported that the cholesterol (Chol) content in the eye lens fiber cell plasma membrane increases significantly with age. High Chol content leads to the formation of cholesterol bilayer domains (CBDs) in the lens membrane. The role of high Chol associated with lens elasticity is unclear. The purpose of this research is to investigate the membrane elasticity of the model of porcine lens-lipid (MPLL) membrane with increasing Chol content to elucidate the role of high Chol in lens membrane elasticity. In this study, we …

Nanopore Structure And Surface Roughness In Brittle Tectonically Deformed Coals Explored By Atomic Force Microscopy, Zhang Ningyuan, Yao Suping

Coal Geology & Exploration

The pore structure of coal is the key to coalbed methane (CBM) exploration and exploitation, and coal mining safety. Compared to primary coals, tectonically deformed coals (TDCs) have stronger heterogeneity and are of great importance in coal reservoir study. Here, the pore structure and surface roughness of brittle TDCs were obtained with atomic force microscopy (AFM) and NanoScope Analysis and Gwyddion software. The results show that tectonic deformation generally promotes the pore development in brittle TDCs, but the extent of tectonic impact varies greatly among different brittle TDCs. As a result, two stages in brittle TDCs were identified: weak brittle …

An Afm Approach Applied In A Study Of Α-Crystallin Membrane Association: New Insights Into Lens Hardening And Presbyopia Development, Nawal K. Khadka, Raju Timsina, Laxman Mainali

Physics Faculty Publications and Presentations

The lens of the eye loses elasticity with age, while α-crystallin association with the lens membrane increases with age. It is unclear whether there is any correlation between α-crystallin association with the lens membrane and loss in lens elasticity. This research investigated α-crystallin membrane association using atomic force microscopy (AFM) for the first time to study topographical images and mechanical properties (breakthrough force and membrane area compressibility modulus (K_A), as measures of elasticity) of the membrane. α-Crystallin extracted from the bovine lens cortex was incubated with a supported lipid membrane (SLM) prepared on a flat mica surface. The …

One-Dimensional Lateral Force Anisotropy At The Atomic Scale In Sliding Single Molecules On A Surface, Yuan Zhang, Daniel J. Trainer, Badri Narayanan, Yang Li, Anh T. Ngo, Sushila Khadka, Arnab Neogi, Brandon Fisher, Larry A. Curtiss, Subramanian K.R.S. Sankaranarayanan, Saw Wai Hla

Physics Faculty Publications

Using a q+ atomic force microscopy at low temperature, a sexiphenyl molecule is slid across an atomically flat Ag(111) surface along the direction parallel to its molecular axis and sideways to the axis. Despite identical contact area and underlying surface geometry, the lateral force required to move the molecule in the direction parallel to its molecular axis is found to be about half of that required to move it sideways. The origin of the lateral force anisotropy observed here is traced to the one-dimensional shape of the molecule, which is further confirmed by molecular dynamics simulations. We also demonstrate that …

Data Processing & Analysis For Atomic Force Microscopy (Afm), Molly Mcdonough, Polievkt Perov, Walter Johnson, Stevan Radojev

Undergraduate Theses and Capstone Projects

Scanning Probe Microscopy (SPM) has become a critical tool for characterization of materials in fields such as physics, material science, chemistry, and biology. Atomic Force Microscopy (AFM) is an increasingly useful technique because of its high resolution in three dimensions, the sample does not need to be conductive, and the technique does not need to take place in vacuum. AFM can image a wide variety of topographies and many different types of materials. AFM can deliver 3D topography information from the angstrom level to the micron scale with high resolution. One of the most important aspects of Atomic Force Microscopy …

Atomic Force Microscopic Characterization Of Solid Electrolyte Interphase In Lithium Ion Batteries, Qing-Yu Dong, Yan-Li Chu, Yan-Bin Shen, Li-Wei Chen

Journal of Electrochemistry

In recent years, the rapid growing in the electric vehicle market has raised higher requirement on the lithium-ion batteries (LIBs) performance towards energy density and safety. However, considering the successful development of LIBs techniques in the past 30 years, there is little room left for improving the LIBs performance on the aspects related to the electrode materials, battery structure design and production processes. It is important to pursue more comprehensive fundamental understanding in the entire system and working principle of LIBs. Solid electrolyte interphase (SEI), existing between the electrode material and the electrolyte, has been proved to be an important …

Factors Influencing Huntingtin Aggregation At Surfaces: Implications For Huntington’S Disease, Sharon E. Groover

Graduate Theses, Dissertations, and Problem Reports

Huntington’s Disease (HD) is a genetic, neurodegenerative disease characterized by an abnormal polyglutamine (polyQ) expansion in the first exon of the huntingtin protein (htt). The polyQ domain facilitates aggregation and initiates the formation of a diverse collection of aggregate species, including fibrils, oligomers and annular aggregates. The first 17 amino acids of htt (Nt17) directly flank the polyQ domain and is a key factor in htt’s association to membranous structures. In addition to Nt17 being an amphipathic αhelix, it also promotes aggregation through self-association and contains numerous posttranslational modifications (PTMs) that can modulate toxicity and subcellular localization. For in depth …

Reaction Induced Morphology Changes Of Tetracene And Pentacene Surfaces, Feifei Li, Jacob W. Ciszek

Chemistry: Faculty Publications and Other Works

Morphology plays a critical role in determining the properties of solid-state molecular materials, yet fluctuates wildly as these materials undergo reaction. A prototypical system, a vapor–solid Diels–Alder reaction of tetracene and pentacene thin-films, is used to observe the evolution of morphology features as the reaction transitions from surface to bulk. The initial stages of reaction display little topographical change as measured by atomic force microscopy (AFM) and scanning electron microscopy (SEM), and substrates are coated with a uniform layer of product 1–2 molecules thick, as determined by energy-dispersive X-ray (EDX) spectroscopy. The highly textured surfaces of late stage reactions are …

Chemical Approaches For Nanofabrication Based On Colloidal Lithography With Organosilanes, Nanoparticles And Nickel Films: The Role Of Water In Directing Surface Self-Assembly, Neepa Malsi Kumari Kuruppu Arachchige

LSU Doctoral Dissertations

The capabilities for accomplishing fundamental surface studies with molecular systems are demonstrated in this dissertation using measurement and imaging modes of scanning probe microscopy. Model systems were chosen for investigations of surface self-assembly mechanisms, with an emphasis on understanding the role of interfacial water in surface reactivity. A key strategy for molecular level studies was to prepare nanostructures using protocols with colloidal lithography and scanning probe-based lithography (SPL). Nanofabricated samples were characterized ex situ with contact and tapping-mode atomic force microscopy (AFM) after key reaction steps, providing direct views of changes in surface morphology at the nanoscale. Magnetic sample modulation …

Exploring The Electrical Properties Of Twisted Bilayer Graphene, William Shannon

Senior Theses

Two-dimensional materials exhibit properties unlike anything else seen in conventional substances. Electrons in these materials are confined to move only in the plane. In order to explore the effects of these materials, we have built apparatus and refined procedures with which to create two-dimensional structures. Two-dimensional devices have been made using exfoliated graphene and placed on gold contacts. Their topography has been observed using Atomic Force Microscopy (AFM) confirming samples with monolayer, bilayer, and twisted bilayer structure. Relative work functions of each have been measured using Kelvin Probe Force Microscopy (KPFM) showing that twisted bilayer graphene has a surface potential …

Influence Of Structural Defects In Silicon On Formation Of Photosensitive Heterostructures Mn4si7-Si-Mn4si7 And Mn4si7-Si-M, T. S. Kamilov, A. S. Rysbaev, V. V. Klechkovskaya, A. S. Orekhov, Sh. Kh. Dzhuraev, A. S. Kasymov

Eurasian Journal of Physics and Functional Materials

The paper considers the influence of a transition amorphous layer at the interface between the higher manganese silicide (HMS) Mn ₄ Si ₇ and silicon doped with manganese (Si ) on the photoelectric properties of heterostructures. The role of the initial structural defects in the near-surface layers of the single-crystal silicon on the penetration of manganese atoms into Si upon doping from the gas phase is shown.It has been established that at high temperatures (T>1050 ◦ C) Mn atoms deposited on the silicon surface group together (due to surface diffusion), forming droplets of liquid manganese, which dissolve the near-surface …

Structure Study Of Al+Al2o3 Composite By Atomic Force Microscopy, D. S. Koleukh, A. S. Kaygorodov, S. V. Zayats, S. N. Paranin

Eurasian Journal of Physics and Functional Materials

The structure of a metal matrix composite based on aluminum containing 6, 17 and 24 wt % Al² O³ was studied by atomic force microscopy. The composite was prepared by the method of magneticpulse compaction from aluminum nanopowder obtained by the electric wire explosion method. The samples compacted at 400 ◦ C have more clearly expressed grain boundaries than those obtained at room temperature. The structure of a composite subjected to dynamic plastic deformation is studied.

Some Radiation Effects In Ii-Vi Quantum Dots, M. B. Sharibaev, Q. A. Ismailov

Eurasian Journal of Physics and Functional Materials

The effect of electron irradiation (E=0.6-1.8 MeV) on the optical characteristics (photoluminescence, PL) of CdTe/ZnTe structures with quantum dots, QDs, was investigated in the temperature range from 4.2 to 250 K. The data on the influence of irradiation on the temperature dependence of PL intensity, energy position and PL line width, W, from QDs were obtained. The narrowing of PL band and the blue shift of the QD peak position are explained by quenching of the low energy component connected with larger QDs. A slight decrease in PL intensity for both QDs and the buffer ZnTe layer as well as …

Combining Atomic Force Microscopy And Shear-Force Acoustic Near-Field Microscopy To Characterize Confined Mesoscopic Fluids, Monte Allen Kozell, Theodore Brockman, Andres H. La Rosa

Physics Faculty Publications and Presentations

An atomic force microscopy (AFM) cantilever is integrated into to a quartz tuning fork (QTF) to probe the viscoelastic properties of mesoscopic fluid layers confined between two solid surfaces under shear. Two procedures to fabricate the AFM/QTF probe are described herein. In the first, a nano-manipulator is used to transport a commercially available afm cantilever from its chip holder to the edge of a QTF tine. In the second, an afm cantilever is fabricated at the edge of the QTF tine itself. In both cases we exploit the capabilities of a dual-beam system (focused ion beam/scanning electron microscope), equipped with …

An Investigation On The Structure Of Au(111)/Imidazolium-Based Ionic Liquid Interface: Effect Of Alkyl Side Chain Length, Li Chen, Shuai Liu, Mian-Gang Li, Jian-Jia Su, Jia-Wei Yan, Bing-Wei Mao

Journal of Electrochemistry

In this work, we comparatively investigated the interfacial structures at Au(111) electrode surfaces in two ionic liquids (ILs) with different alkyl chain lengths by combining AFM force curve technique and electrochemical methods. The number and stability of the layering structures, and their potential-dependency were analyzed. The experimental results indicated that the tendencies of force-potential curves in the two ILs behave the same way. At potentials close to PZC, the ions arrange loosely, which lowers the stability of the layering structure. As the potential shifting away from PZC, more ions attach to electrode surface, which increases the stability of layering structure, …

Investigation Of The Acoustic Response Of A Confined Mesoscopic Water Film Utilizing A Combined Atomic Force Microscope And Shear Force Microscope Technique, Monte Allen Kozell

Dissertations and Theses

An atomic force microscopy beam-like cantilever is combined with an electrical tuning fork to form a shear force probe that is capable of generating an acoustic response from the mesoscopic water layer under ambient conditions while simultaneously monitoring force applied in the normal direction and the electrical response of the tuning fork shear force probe. Two shear force probes were designed and fabricated. A gallium ion beam was used to deposit carbon as a probe material. The carbon probe material was characterized using energy dispersive x-ray spectroscopy and scanning transmission electron microscopy. The probes were experimentally validated by demonstrating the …

Experimental And Sensitivity Analysis Of Dmasp Cantilever Vibration Behavior Based On Mcs Theory In The Moist Environment, M. H. Korayem, Byung I. Kim, A. H. Korayem

Physics Faculty Publications and Presentations

A Micro-cantilever (MC) and a probe are two main components of the atomic force microscope (AFM). The dimensions of these components are in micro scales while their oscillation amplitude is on a nanometer scale. The present study intended to not only increase the accuracy of the simulation with regard to geometric discontinuities based on the Timoshenko Beam Model using the modified couple stress (MCS) theory but also increase the accuracy of the prediction of a system behavior by considering the effect hysteresis effect into the system vibration equations based on Bouc-Wen Model. Due to the lack of the experimental results …

Effects Of Edge Inclination Angles On Whispering-Gallery Modes In Printable Wedge Microdisk Lasers, Cong Chen, Lei Wan, Hengky Chandrahalim

Faculty Publications

The ink-jet technique was developed to print the wedge polymer microdisk lasers. The characterization of these lasers was implemented using a free-space optics measurement setup. It was found that disks of larger edge inclination angles have a larger free spectral range (FSR) and a lower resonance wavelength difference between the fundamental transverse electric (TE) and transverse magnetic (TM) whispering-gallery modes (WGMs). This behavior was also confirmed with simulations based on the modified Oxborrow’s model with perfectly matched layers (PMLs), which was adopted to accurately calculate the eigenfrequencies, electric field distributions, and quality parameters of modes in the axisymmetric microdisk resonators. …

Size Investigation Of Silicon Nanoclusters Deposited On Hopg Using Noncontact Atomic Force Microscopy, Mümi̇n Mehmet Koç

Turkish Journal of Physics

The sizes of silicon nanoparticles produced using two different novel methods are investigated in this report. The method of production used to generate silicon oxide nanoparticles was achieved via gas aggregation codeposition with water on a cold target, and also via a liquid jet method. The nanoparticles were drop-cast on a highly oriented pyrolytic graphite (HOPG) substrate and assessed using ultrahigh vacuum atomic force microscopy (AFM). Noncontact constant force mode was used in the AFM investigations. The silicon nanoparticles produced using the gas aggregation and water codeposition method were found to be smaller than 2 nm. A degree of deviation …

Direct Measurement Of Rupture Force Of Single Triazole Molecule By Atomic Force Microscope And Solid Phase Synthesis Of Monodisperse Polyethylene Glycols, Ashok Khanal

Dissertations, Master's Theses and Master's Reports

This dissertation includes two topics, which are related to each other: (1) Rupture force measurement of single triazole molecule by atomic force microscope (AFM) and (2) Solid phase stepwise synthesis of polyethylene glycols (PEGs).

The reaction of an alkyne and an azide to form a 1,2,3- triazole has found wide applications. However, the stability of triazole under mechanical stress is unclear. We investigated the cycloreversion at the single molecular level using atomic force microscopy. A mica surface functionalized with a molecule containing a 1,2,3-triazole moiety in the middle and an activated ester at the end was prepared. An AFM tip …

Fabrication And Characterization Of Intricate Nanostructures, Treva T. Brown

University of New Orleans Theses and Dissertations

Encapsulation of nanoparticles within hexaniobate nanoscrolls presents interesting advances in the formation of nanocomposites exhibiting unique multi-dimensional properties. Building upon previous successes, facile yet versatile wet-chemical and microwave-irradiation synthetic protocols for the fabrication of a series of hexaniobate composites are presented herein. Solvothermal and, more recently, microwave-assisted methods have been developed that allow for the fabrication of peapod-like structures. During solvothermal treatment, exfoliated hexaniobate nanosheets scroll around highly ordered chains of preformed nanoparticles (NPs) to produce nanopeapods (NPPs). This approach offers versatility and high yields, in addition to the potential for advanced functional device fabrication.

For the characterization of these …

Nanopatterns Of Zinc Phthalocyanines, Gold Nanoparticles, And Porphyrins Prepared Using Particle Lithography: Characterization Of Patterning Steps With Scanning Probe Microscopy, Ashley Marie Taylor

LSU Doctoral Dissertations

The growth and self-assembly of molecules on surfaces can be directly visualized at the molecular level using studies which combine nanoscale lithography and high-resolution imaging. Nanopatterning provides a unique and practical approach for direct views of surface changes after the key chemical steps of nanopatterning, providing landmarks and baselines for measuring growth in vertical and lateral dimensions. Controlling the arrangement of materials on surfaces at the nanoscale can be achieved using particle lithography. Arrays of well-defined nanostructures can be prepared with reproducible geometries and arrangement. Results for the preparation of nanopatterns produced with particle lithography are presented using high resolution …

Property Morphology Correlations Of Organic Semiconductor Nanowires, Frederick Marshall Mcfarland

Dissertations

Chemically doped and non-doped P3HT nanoaggregates are studied to establish a comprehensive understanding of the interplay between their morphology and various optoelectronic properties. One-dimensional nanoaggregates of P3HT are chosen as the model systems here due to their high surface/volume ratio and suitability for microscopic investigations.

Atomic force microscopy (AFM) and kelvin probe force microscopy (KPFM) are used to correlate property/morphology characteristics of non-doped P3HT nanowhiskers. Topographical measurements indicate that individually folded P3HT motifs stack via interfacial interactions to form nanowhiskers in solution. Further aging leads to multi-layered nanowhiskers with greater stability and less instances of π-π sliding of interfacial edge-on …