Open Access. Powered by Scholars. Published by Universities.®
Physical Sciences and Mathematics Commons™
Open Access. Powered by Scholars. Published by Universities.®
Articles 31 - 60 of 68
Full-Text Articles in Physical Sciences and Mathematics
Three-Dimensional-Network Li3v2(Po4) 3/C Composite As High Rate Lithium Ion Battery Cathode Material And Its Compatibility With Ionic Liquid Electrolytes, Jiantie Xu, Shulei Chou, Cuifeng Zhou, Qinfen Gu, Hua-Kun Liu, S X. Dou
Three-Dimensional-Network Li3v2(Po4) 3/C Composite As High Rate Lithium Ion Battery Cathode Material And Its Compatibility With Ionic Liquid Electrolytes, Jiantie Xu, Shulei Chou, Cuifeng Zhou, Qinfen Gu, Hua-Kun Liu, S X. Dou
Australian Institute for Innovative Materials - Papers
A high performance Li3V2(PO4)3 cathode material for lithium ion batteries was synthesized by the microwave-assisted hydrothermal method followed by a post annealing process. The synchrotron X-ray diffraction analysis results confirmed that single-phase Li3V2(PO4)3 with monoclinic structure was obtained. Scanning electron microscope and transmission electron microscope images revealed that the as-prepared Li3V 2(PO4)3 was composed of nanowires and microsized particles. Electrochemical results demonstrated that the Li 3V2(PO4)3 electrode measured at 10 C after 500 cycles can deliver discharge capacities of 85.4 mAh g-1 and 103.4 mAh g-1, with a capacity retention of 99.3% and 95.9%, in the voltage ranges of 3.0-4.3 …
Porous Ni0.5zn0.5fe2o4 Nanospheres: Synthesis, Characterization, And Application For Lithium Storage, Min Zhang, Xuanwen Gao, Zhenfa Zi, Jianming Dai, Jiazhao Wang, Shulei Chou, Changhao Liang, Xuebin Zhu, Yuping Sun, Hua-Kun Liu
Porous Ni0.5zn0.5fe2o4 Nanospheres: Synthesis, Characterization, And Application For Lithium Storage, Min Zhang, Xuanwen Gao, Zhenfa Zi, Jianming Dai, Jiazhao Wang, Shulei Chou, Changhao Liang, Xuebin Zhu, Yuping Sun, Hua-Kun Liu
Australian Institute for Innovative Materials - Papers
Monodisperse porous Ni0.5Zn0.5Fe2O4 nanospheres have been successfully synthesized by the solvothermal method. The diameter of the nanospheres can be tuned by controlling the reactant concentration. Lower reactant concentration is favoured for the synthesis of mesoporous Ni0.5Zn0.5Fe2O4 nanospheres with higher surface area. The electrochemical results show that mesoporous Ni0.5Zn0.5Fe2O4 nanospheres exhibit high reversible specific capacity (1110 mAh g-1) for Li storage and high capacity retention, with 700 mAh g-1 retained up to 50 cycles. The excellent electrochemical properties could be attributed to the large surface area and mesoporous structure. The results suggest that Ni0.5Zn0.5Fe2O4 could be a promising high capacity anode …
Graphene-Based Nanocomposites For Energy Storage And Conversion In Lithium Batteries, Supercapacitors And Fuel Cells, Nasir Mahmood, Chenzhen Zhang, Han Yin, Yanglong Hou
Graphene-Based Nanocomposites For Energy Storage And Conversion In Lithium Batteries, Supercapacitors And Fuel Cells, Nasir Mahmood, Chenzhen Zhang, Han Yin, Yanglong Hou
Australian Institute for Innovative Materials - Papers
Due to their unique properties, together with their ease of synthesis and functionalization, graphene-based materials have been showing great potential in energy storage and conversion. These hybrid structures display excellent material characteristics, including high carrier mobility, faster recombination rate and long-time stability. In this review, after a short introduction to graphene and its derivatives, we summarize the recent advances in the synthesis and applications of graphene and its derivatives in the fields of energy storage (lithium ion, lithium-air, lithium-sulphur batteries and supercapacitors) and conversion (oxygen reduction reaction for fuel cells). This article further highlights the working principles and problems hindering …
Electrode Nanostructures In Lithium-Based Batteries, Nasir Mahmood, Yanglong Hou
Electrode Nanostructures In Lithium-Based Batteries, Nasir Mahmood, Yanglong Hou
Australian Institute for Innovative Materials - Papers
Lithium-based batteries possessing energy densities much higher than those of the conventional batteries belong to the most promising class of future energy devices. However, there are some fundamental issues related to their electrodes which are big roadblocks in their applications to electric vehicles (EVs). Nanochemistry has advantageous roles to overcome these problems by defi ning new nanostructures of electrode materials. This review article will highlight the challenges associated with these chemistries both to bring high performance and longevity upon considering the working principles of the various types of lithium-based (Li-ion, Li-air and Li-S) batteries. Further, the review discusses the advantages …
Microwave Autoclave Synthesized Multi-Layer Graphene/Single-Walled Carbon Nanotube Composites For Free-Standing Lithium-Ion Battery Anodes, Chao Zhong, Jia-Zhao Wang, David Wexler, Hua-Kun Liu
Microwave Autoclave Synthesized Multi-Layer Graphene/Single-Walled Carbon Nanotube Composites For Free-Standing Lithium-Ion Battery Anodes, Chao Zhong, Jia-Zhao Wang, David Wexler, Hua-Kun Liu
Australian Institute for Innovative Materials - Papers
Multi-layer graphene sheets have been synthesized by a time-efficient microwave autoclave method and used to form composites in situ with single-walled carbon nanotubes. The application of these composites as flexible free-standing film electrodes was then investigated. According to the transmission electron microscopy and X-ray diffraction characterizations, the average d-spacing of the graphene-single-walled carbon nanotube composites was 0.41 nm, which was obviously larger than that of the as-prepared pure graphene (0.36 nm). The reversible Li-cycling properties of the free-standing films have been evaluated by galvanostatic discharge-charge cycling and electrochemical impedance spectroscopy. Results showed that the free-standing composite film with 70 wt% …
A Germanium/Single-Walled Carbon Nanotube Composite Paper As A Free-Standing Anode For Lithium-Ion Batteries, Jun Wang, Jiazhao Wang, Ziqi Sun, Xuanwen Gao, Chao Zhong, Shulei Chou, Hua-Kun Liu
A Germanium/Single-Walled Carbon Nanotube Composite Paper As A Free-Standing Anode For Lithium-Ion Batteries, Jun Wang, Jiazhao Wang, Ziqi Sun, Xuanwen Gao, Chao Zhong, Shulei Chou, Hua-Kun Liu
Australian Institute for Innovative Materials - Papers
Paper-like free-standing germanium (Ge) and single-walled carbon nanotube (SWCNT) composite anodes were synthesized by the vacuum filtration of Ge/SWCNT composites, which were prepared by a facile aqueous-based method. The samples were characterized by X-ray diffraction, field emission scanning electron microscopy, and transmission electron microscopy. Electrochemical measurements demonstrate that the Ge/SWCNT composite paper anode with the weight percentage of 32% Ge delivered a specific discharge capacity of 417 mA h g−1 after 40 cycles at a current density of 25 mA g−1, 117% higher than the pure SWCNT paper anode. The SWCNTs not only function as a flexible mechanical support for …
A Solvothermal Strategy: One-Step In Situ Synthesis Of Self-Assembled 3d Graphene-Based Composites With Enhanced Lithium Storage Capacity, Jingjing Ma, Jiulin Wang, Yu-Shi He, Xiao Zhen Liao, Jun Chen, Jiazhao Wang, Tao Yuan, Zi-Feng Ma
A Solvothermal Strategy: One-Step In Situ Synthesis Of Self-Assembled 3d Graphene-Based Composites With Enhanced Lithium Storage Capacity, Jingjing Ma, Jiulin Wang, Yu-Shi He, Xiao Zhen Liao, Jun Chen, Jiazhao Wang, Tao Yuan, Zi-Feng Ma
Australian Institute for Innovative Materials - Papers
A facile and controllable approach has been developed to synthesize three-dimensional (3D) graphene-based monoliths. Here, as a proof-of-concept experiment, self-assembled 3D CoO/graphene sheets (CoO/GS) composites with porous structures have been successfully fabricated in an ethanol medium by a one-step, in situ growth, solvothermal method. During the process, the in situ nucleation and growth of CoO particles on GS were tuned by the formation of a 3D GS network. In the as-prepared composites, the self-assembled 3D GS network around the CoO particles can not only provide a 3D conductive matrix, but also buffer the volume changes of CoO and restrain the …
High Performance Pure Sulfur Honeycomb-Like Architectures Synthesized By A Cooperative Self-Assembly Strategy For Lithium Sulfur Batteries, Xin Liang, Mohammad Kaiser, Konstantin Konstantinov, Richard Tandiono, Zhaoxiang Prof Zhaoxiang Wang, Hua-Kun Liu, S X. Dou, Jiazhao Wang
High Performance Pure Sulfur Honeycomb-Like Architectures Synthesized By A Cooperative Self-Assembly Strategy For Lithium Sulfur Batteries, Xin Liang, Mohammad Kaiser, Konstantin Konstantinov, Richard Tandiono, Zhaoxiang Prof Zhaoxiang Wang, Hua-Kun Liu, S X. Dou, Jiazhao Wang
Australian Institute for Innovative Materials - Papers
Honeycomb-like pure sulfur architectures were synthesized by a cooperative self-assembly strategy, in which a soft template is used to form the porous structure. Their electrochemical performance is significantly improved comparing with the commercial sulfur powder and the as-prepared sulfur without honeycomb morphology. There has been no report on using a soft template to prepare honeycomb-like sulfur particles.
Tuning Three-Dimensional Tio2 Nanotube Electrode To Achieve High Utilization Of Ti Substrate For Lithium Storage, Zhijia Zhang, Qing-Yi Zeng, Shulei Chou, Xinjun Li, Huijun Li, Kiyoshi Ozawa, Hua-Kun Liu, Jiazhao Wang
Tuning Three-Dimensional Tio2 Nanotube Electrode To Achieve High Utilization Of Ti Substrate For Lithium Storage, Zhijia Zhang, Qing-Yi Zeng, Shulei Chou, Xinjun Li, Huijun Li, Kiyoshi Ozawa, Hua-Kun Liu, Jiazhao Wang
Australian Institute for Innovative Materials - Papers
Three-dimensional (3D) TiO2 nanotube arrays grown on Ti mesh were prepared via the anodization process. The diameters of the Ti and TiO 2/Ti wires and the length of the TiO2 nanotubes have linear relationships with the anodization processing time. When the anodization processing time is 600 min, the TiO2/Ti mesh anode materials showed good capacity retention and high specific area capacity, without the need for a current collector or binder, due to their high surface area, high substrate utilization, and large active material loading rate per unit area. At the current density of 50 μA cm-2, TiO2/Ti mesh with 600 …
Mesoporous Hexagonal Co3o4 For High Performance Lithium Ion Batteries, Dawei Su, Xiuqiang Xie, Paul Munroe, S X. Dou, Guoxiu Wang
Mesoporous Hexagonal Co3o4 For High Performance Lithium Ion Batteries, Dawei Su, Xiuqiang Xie, Paul Munroe, S X. Dou, Guoxiu Wang
Australian Institute for Innovative Materials - Papers
Mesoporous Co3O4 nanoplates were successfully prepared by the conversion of hexagonal beta-Co(OH)(2) nanoplates. TEM, HRTEM and N-2 sorption analysis confirmed the facet crystal structure and inner mesoporous architecture. When applied as anode materials for lithium storage in lithium ion batteries, mesoporous Co3O4 nanocrystals delivered a high specific capacity. At 10 degrees C current rate, as-prepared mesoporous Co3O4 nanoplates delivered a specific capacity of 1203 mAh/g at first cycle and after 200 cycles it can still maintain a satisfied value (330 mAh/g). Fromex-situ TEM, SAED and FESEM observation, it was found that mesoporous Co3O4 nanoplates were reduced to Li2O and Co …
Tio2 Coated Three-Dimensional Hierarchically Ordered Porous Sulfur Electrode For The Lithium/Sulfur Rechargeable Batteries, Hongqiang Wang, Sha Li, Dan Li, Zhixin Chen, Hua-Kun Liu, Zaiping Guo
Tio2 Coated Three-Dimensional Hierarchically Ordered Porous Sulfur Electrode For The Lithium/Sulfur Rechargeable Batteries, Hongqiang Wang, Sha Li, Dan Li, Zhixin Chen, Hua-Kun Liu, Zaiping Guo
Australian Institute for Innovative Materials - Papers
A three-dimensional (3D) hierarchically ordered mesoporous carbon-sulfur composite slice coated with a thin TiO2 layer has been synthesized by a low-cost process and investigated as a cathode for the lithium-sulfur batteries. The TiO2 coated carbon sulfur composite thin slice works as a binder-free cathode without any current collectors for lithium-sulfur batteries. The hierarchical architecture provides a 3D conductive network for electron transfer, open channels for ion diffusion and strong confinement of soluble polysulfides. Meanwhile, TiO2 (titanium dioxide) coating layer could further effectively prevent the dissolution of polysulfides and also improve the strength of the entire electrode, thereby enhancing the electrochemical …
Study On Vanadium Substitution To Iron In Li2fep 2o7 As Cathode Material For Lithium-Ion Batteries, Jiantie Xu, Shulei Chou, Qinfen Gu, M F. Md Din, Hua-Kun Liu, S X. Dou
Study On Vanadium Substitution To Iron In Li2fep 2o7 As Cathode Material For Lithium-Ion Batteries, Jiantie Xu, Shulei Chou, Qinfen Gu, M F. Md Din, Hua-Kun Liu, S X. Dou
Australian Institute for Innovative Materials - Papers
A series of Li2Fe1-3x/2VxP 2O7 (x = 0, 0.025, 0.05, 0.075, and 0.1) cathode materials for LIBs were prepared by the sol-gel method. Structural characterization of Li2Fe1-3x/2VxP2O7 (x = 0, 0.025, 0.05, 0.075, and 0.1) samples was conducted by synchrotron X-ray diffraction. The morphology and oxidation states of Fe2+ and V 3+ in the Li2Fe1-3x/2VxP 2O7 samples were confirmed by scanning electron microscopy and magnetic susceptibility measurements, respectively. The electrochemical measurements indicated that Li2Fe1-3x/2VxP 2O7 (x = 0.025) delivered the higher reversible capacity of 79.9 mAh g-1 at 1 C in the voltage range of 2.0 - 4.5 V with …
Novel Germanium/Polypyrrole Composite For High Power Lithium-Ion Batteries, Xuanwen Gao, Wenbin Luo, Chao Zhong, David Wexler, Shulei Chou, Hua-Kun Liu, Zhicong Shi, Guohua Chen, Kiyoshi Ozawa, Jiazhao Wang
Novel Germanium/Polypyrrole Composite For High Power Lithium-Ion Batteries, Xuanwen Gao, Wenbin Luo, Chao Zhong, David Wexler, Shulei Chou, Hua-Kun Liu, Zhicong Shi, Guohua Chen, Kiyoshi Ozawa, Jiazhao Wang
Australian Institute for Innovative Materials - Papers
Nano-Germanium/polypyrrole composite has been synthesized by chemical reduction method in aqueous solution. The Ge nanoparticles were directly coated on the surface of the polypyrrole. The morphology and structural properties of samples were determined by X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Thermogravimetric analysis was carried out to determine the polypyrrole content. The electrochemical properties of the samples have been investigated and their suitability as anode materials for the lithium-ion battery was examined. The discharge capacity of the Ge nanoparticles calculated in the Ge-polypyrrole composite is 1014 mAh g-1 after 50 cycles at 0.2 C rate, which is …
Sulfur-Graphene Nanostructured Cathodes Via Ball-Milling For High-Performance Lithium-Sulfur Batteries, Jiantie Xu, Jianglan Shui, Jianli Wang, Min Wang, Hua-Kun Liu, S X. Dou, In-Yup Jeon, Jeong-Min Seo, Jong-Beom Baek, Liming Dai
Sulfur-Graphene Nanostructured Cathodes Via Ball-Milling For High-Performance Lithium-Sulfur Batteries, Jiantie Xu, Jianglan Shui, Jianli Wang, Min Wang, Hua-Kun Liu, S X. Dou, In-Yup Jeon, Jeong-Min Seo, Jong-Beom Baek, Liming Dai
Australian Institute for Innovative Materials - Papers
Although much progress has been made to develop high-performance lithium-sulfur batteries (LSBs), the reported physical or chemical routes to sulfur cathode materials are often multistep/complex and even involve environmentally hazardous reagents, and hence are infeasible for mass production. Here, we report a simple ball-milling technique to combine both the physical and chemical routes into a one-step process for low-cost, scalable, and eco-friendly production of graphene nanoplatelets (GnPs) edge-functionalized with sulfur (S-GnPs) as highly efficient LSB cathode materials of practical significance. LSBs based on the S-GnP cathode materials, produced by ball-milling 70 wt % sulfur and 30 wt % graphite, delivered …
Synthesis And Electrochemical Properties Of Wo3/C For Lithium Ion Batteries, Hong Gao, Shuijin S. Yang, Chuanqi Feng, Jiazhao Wang, Zaiping Guo
Synthesis And Electrochemical Properties Of Wo3/C For Lithium Ion Batteries, Hong Gao, Shuijin S. Yang, Chuanqi Feng, Jiazhao Wang, Zaiping Guo
Australian Institute for Innovative Materials - Papers
WO3/C nanorods were prepared by a combination of hydrothermal synthesis method and the solid phase reaction method, using (NH4)10H2(W2O7)6, H2C2O4·2H2O and glucose(carbon source) as raw materials. The effects of different proportions of glucose on the morphologies and electrochemical properties of the final products were systematically investigated. The results showed that the WO3/C nanorods prepared with the 10 wt.% glucose as carbon source exhibited the highest reversible specific capacity (807 mAh g-1) at current density …
Pristine Organo-Imido Polyoxometalates As An Anode For Lithium Ion Batteries, Rao Naumaan Nasim Khan, Nasir Mahmood, Chunlin Lv, Guohui Sima, Jin Zhang, Jian Hao, Yanglong Hou, Yongge Wei
Pristine Organo-Imido Polyoxometalates As An Anode For Lithium Ion Batteries, Rao Naumaan Nasim Khan, Nasir Mahmood, Chunlin Lv, Guohui Sima, Jin Zhang, Jian Hao, Yanglong Hou, Yongge Wei
Australian Institute for Innovative Materials - Papers
Here we have designed a strategy to improve the electronic conductivities of polyoxometalates (POMs) via property-oriented organic grafting for use in lithium-ion batteries (LIBs). POMs usually exhibit limited electronic conductivity that hinders their use in electronic applications. Organic grafting of POMs defines a valuable path for improving electronic conductivities of POMs, due to the enhanced metal to ligand charge transfer (MLCT) via d-π electronic interactions, and results in their feasible application in LIBs. Comparative practical and theoretical study of the effect of functional groups revealed that grafting of the remote electron withdrawing group (-SCN) on POMs via organo-imidoylization along with …
Synthesis Of Hollow Geo2 Nanostructures, Transformation Into Geoc, And Lithium Storage Properties, Li Li, Kuok H. Seng, Chuanqi Feng, Hua-Kun Liu, Zaiping Guo
Synthesis Of Hollow Geo2 Nanostructures, Transformation Into Geoc, And Lithium Storage Properties, Li Li, Kuok H. Seng, Chuanqi Feng, Hua-Kun Liu, Zaiping Guo
Australian Institute for Innovative Materials - Papers
In this work, we synthesize mesoporous and hollow germanium@carbon nanostructures through simultaneous carbon coating and reduction of a hollow ellipsoidal GeO2 precursor. The formation mechanism of GeO 2 ellipsoids and the ratio of Ge4+ to Sn4+ as the starting materials are also investigated. Compared to the solid ellipsoidal Ge@carbon (Ge@C-3), the hollow ellipsoidal Ge@C-1 sample exhibits better cycling stability (100% capacity retention after 200 cycles at the 0.2 C rate) and higher rate capability (805 mA h g-1 at 20 C) compared to Ge@C-3 due to its unique hollow structure; therefore, this hollow ellipsoidal Ge@carbon can be considered as a …
Zno-Doped Lifepo4 Cathode Material For Lithium-Ion Battery Fabricated By Hydrothermal Method, Yemin Hu, Jun Yao, Zhe Zhao, Mingyuan Zhu, Ying Li, Hongming Jin, Huijun Zhao, Jiazhao Wang
Zno-Doped Lifepo4 Cathode Material For Lithium-Ion Battery Fabricated By Hydrothermal Method, Yemin Hu, Jun Yao, Zhe Zhao, Mingyuan Zhu, Ying Li, Hongming Jin, Huijun Zhao, Jiazhao Wang
Australian Institute for Innovative Materials - Papers
LiFePO4 particles doped with zinc oxide was synthesized via a hydrothermal route and used as cathode material for lithium-ion battery. Sample of preferable shape and structure was obtained by a concise and efficient process. ZnO doping into the LiFePO4 matrix was positively confirmed by the results of X-ray diffraction (XRD); high-resolution transmission electron microscopy (HRTEM); energy dispersive spectrometer (EDS), and X-ray photoelectron spectroscopy (XPS). LiFePO4 doped with ZnO tends to form nanometer-size and homogeneous particles, which can improve markedly the performance and stability of charge-discharge cycle. A specific discharge capacity of ZnO-doped LiFePO4 at 132.3 mAh g-1 was achieved, with …
A Hybrid Electrolyte Energy Storage Device With High Energy And Long Life Using Lithium Anode And Mno2 Nanoflake Cathode, Shulei Chou, Yun-Xiao Wang, Jiantie Xu, Jia-Zhao Wang, Hua-Kun Liu, S X. Dou
A Hybrid Electrolyte Energy Storage Device With High Energy And Long Life Using Lithium Anode And Mno2 Nanoflake Cathode, Shulei Chou, Yun-Xiao Wang, Jiantie Xu, Jia-Zhao Wang, Hua-Kun Liu, S X. Dou
Australian Institute for Innovative Materials - Papers
A hybrid electrolyte energy storage system combining the features of supercapacitors and lithium batteries has been constructed. It consists of MnO2 nanoflakes in 1 M Li2SO4 aqueous electrolyte as the cathode and lithium foil in ionic liquid (1 M lithium bis(trifluoromethanesulfonyl)imide (LiNTf2) in N-methyl-N-propyl pyrrolidinium bis(trifluoromethanesulfonyl)imide ([C(3)mpyr][NTf2])) electrolyte as the anode, separated by a lithium super ionic conductor glass ceramic film (LiSICON). This system shows the advantages of both a supercapacitor (long cycle life) and a lithium battery (high energy), as well as low cost and improved safety due to the combination of ionic liquid and ceramic solid state electrolyte …
Polypyrrole Doped With Redox-Active Poly(2-Methoxyaniline-5-Sulfonic Acid) For Lithium Secondary Batteries, Yang Yang, Caiyun Wang, Syed A. Ashraf, Gordon G. Wallace
Polypyrrole Doped With Redox-Active Poly(2-Methoxyaniline-5-Sulfonic Acid) For Lithium Secondary Batteries, Yang Yang, Caiyun Wang, Syed A. Ashraf, Gordon G. Wallace
Australian Institute for Innovative Materials - Papers
Polypyrrole is a promising electrode material for flexible/bendable energy storage devices due to its inherent fast redox switching, mechanical flexibility, easy processability and being environmentally benign. However, its low attainable capacity limits its practical applications. Here, we synthesise a polypyrrole/poly(2-methoxyaniline-5-sulfonic acid) (PPy/PMAS) composite by incorporating redox-active PMAS into a PPy matrix via an electropolymerization method. For comparison, polypyrrole containing the electrochemically inert dopant p-toluenesulfonate (PPy-pTS) was prepared under the same conditions. The resultant PPy/PMAS film shows greatly improved electrochemical properties by harnessing the contribution from PMAS, i.e. higher specific capacity, better rate capability and improved cycling stability when used as …
A Facile Route To Synthesize Transition Metal Oxide/Reduced Graphene Oxide Composites And Their Lithium Storage Performance, Chongjun Zhao, Shulei Chou, Yunxiao Wang, Cuifeng Zhou, Hua-Kun Liu, S X. Dou
A Facile Route To Synthesize Transition Metal Oxide/Reduced Graphene Oxide Composites And Their Lithium Storage Performance, Chongjun Zhao, Shulei Chou, Yunxiao Wang, Cuifeng Zhou, Hua-Kun Liu, S X. Dou
Australian Institute for Innovative Materials - Papers
Transition metal oxide (Mn3O4, Fe2O3, Co3O4, and ZnO) and reduced graphene oxide (RGO) composites were successfully synthesized via a hydrothermal method using the direct reaction between the corresponding metal powder and graphene oxide (GO). In this process, the GO can be reduced by transition metal powder in water, and the nanosized metal oxide can be obtained, and homogeneously mixed with and wrapped by RGO to form a metal oxide/RGO composite at the same time. X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, and scanning and transmission electron microscopy were used to characterize the as-prepared materials. The different experimental parameters, including reactants, …
The Effects Of Fec (Fluoroethylene Carbonate) Electrolyte Additive On The Lithium Storage Properties Of Nio (Nickel Oxide) Nanocuboids, Kuok H. Seng, Li Li, Dapeng Chen, Zhixin Chen, Xiaolin Wang, Hua-Kun Liu, Zaiping Guo
The Effects Of Fec (Fluoroethylene Carbonate) Electrolyte Additive On The Lithium Storage Properties Of Nio (Nickel Oxide) Nanocuboids, Kuok H. Seng, Li Li, Dapeng Chen, Zhixin Chen, Xiaolin Wang, Hua-Kun Liu, Zaiping Guo
Australian Institute for Innovative Materials - Papers
Nanocuboid shaped NiO (nickel oxide) has been synthesized using an optical floating zone furnace. It was found that the nanocuboids exhibit single crystalline nature, and have clean and sharp edges. Furthermore, the NiO nanocuboids were tested for their electrochemical performances as anode material for LIBs (lithium-ion batteries) in a coin-type half cell. The effects of FEC (fluoroethylene carbonate) additive on the lithium storage performance were also investigated, which is the first of such studies for transition metal oxides. It was found that FEC has a positive effect on the cycling stability and also improves the rate performances of the nanocuboids. …
Hollow Structured Li3vo4 Wrapped With Graphene Nanosheets In Situ Prepared By One-Pot Template-Free Method As An Anode For Lithium-Ion Batteries, Yi Shi, Jia-Zhao Wang, Shulei Chou, David Wexler, Hui-Jun Li, Kiyoshi Ozawa, Hua-Kun Liu, Yu-Ping Wu
Hollow Structured Li3vo4 Wrapped With Graphene Nanosheets In Situ Prepared By One-Pot Template-Free Method As An Anode For Lithium-Ion Batteries, Yi Shi, Jia-Zhao Wang, Shulei Chou, David Wexler, Hui-Jun Li, Kiyoshi Ozawa, Hua-Kun Liu, Yu-Ping Wu
Australian Institute for Innovative Materials - Papers
To explore good anode materials of high safety, high reversible capacity, good cycling, and excellent rate capability, a Li3VO4 microbox with wall thickness of 40 nm was prepared by a one-pot and template-free in situ hydrothermal method. In addition, its composite with graphene nanosheets of about six layers of graphene was achieved. Both of them, especially the Li3VO4/graphene nanosheets composite, show superior electrochemical performance to the formerly reported vanadium-based anode materials. The composite shows a reversible capacity of 223 mAh g−1 even at 20C (1C = 400 mAh g−1). After 500 cycles at 10C there is no evident capacity fading.
An Overview - Functional Nanomaterials For Lithium Rechargeable Batteries, Supercapacitors, Hydrogen Storage, And Fuel Cells, Hua-Kun Liu
Australian Institute for Innovative Materials - Papers
There is tremendous worldwide interest in functional nanostructured materials, which are the advanced nanotechnology materials with internal or external dimensions on the order of nanometers. Their extremely small dimensions make these materials unique and promising for clean energy applications such as lithium ion batteries, supercapacitors, hydrogen storage, fuel cells, and other applications. This paper will highlight the development of new approaches to study the relationships between the structure and the physical, chemical, and electrochemical properties of functional nanostructured materials. The Energy Materials Research Programme at the Institute for Superconducting and Electronic Materials, the University of Wollongong, has been focused on …
Simple Synthesis Of Yolk-Shelled Znco2o4 Microspheres Towards Enhancing The Electrochemical Performance Of Lithium-Ion Batteries In Conjunction With A Sodium Carboxymethyl Cellulose Binder, Jingfa Li, Jiazhao Wang, David Wexler, Dongqi Shi, Jianwen Liang, Hua-Kun Liu, Shenglin Xiong, Yitai Qian
Simple Synthesis Of Yolk-Shelled Znco2o4 Microspheres Towards Enhancing The Electrochemical Performance Of Lithium-Ion Batteries In Conjunction With A Sodium Carboxymethyl Cellulose Binder, Jingfa Li, Jiazhao Wang, David Wexler, Dongqi Shi, Jianwen Liang, Hua-Kun Liu, Shenglin Xiong, Yitai Qian
Australian Institute for Innovative Materials - Papers
Mixed metal oxides have been attracting more and more attention recently because of their advantages and superiorities, which can improve the electrochemical performance of single metal oxides. These advantages include structural stability, good electronic conductivity, and reversible capacity. In this work, uniform yolk-shelled ZnCo2O4 microspheres were synthesized by pyrolysis of ZnCo-glycolate microsphere precursors which were prepared via a simple refluxing route without any precipitant or surfactant. The formation process of the yolk-shelled microsphere structure during the thermal decomposition of ZnCo-glycolate is discussed, which is mainly based on the heterogeneous contraction caused by non-equilibrium heat treatment. The performances of the as-prepared …
Spinel Linixmn2-Xo4 As Cathode Material For Aqueous Rechargeable Lithium Batteries, F X. Wang, S Y. Xiao, Y Shi, L L. Liu, Y S. Zhu, Y P. Wu, J. Z. Wang, R Holze
Spinel Linixmn2-Xo4 As Cathode Material For Aqueous Rechargeable Lithium Batteries, F X. Wang, S Y. Xiao, Y Shi, L L. Liu, Y S. Zhu, Y P. Wu, J. Z. Wang, R Holze
Australian Institute for Innovative Materials - Papers
Ni-doped spinel LiNixMn2-xO4 (x = 0, 0.05, 0.10) samples were prepared by a sol-gel method. Structure and morphology of the samples were characterized by X-ray diffraction, scanning electron microscopy, Brunnauer-Emmet-Teller method and inductively coupled plasma atomic absorption spectrometry. The electrochemical behavior as a cathode material (positive mass) for aqueous rechargeable lithium batteries (ARLBs) was investigated by cyclic voltammetry, electrochemical impedance spectroscopy, capacity measurements and cycling tests. The results show that the LiNi 0.1Mn1.9O4 electrode presents the best rate and cycling performance but low reversible capacity. In contrast, the LiNi 0.05Mn1.95O4 electrode shows a higher reversible capacity and relatively good cycling …
Nanocomposites Of Silicon And Carbon Derived From Coal Tar Pitch: Cheap Anode Materials For Lithium-Ion Batteries With Long Cycle Life And Enhanced Capacity, Yun-Xiao Wang, Shulei Chou, Hua-Kun Liu, S X. Dou
Nanocomposites Of Silicon And Carbon Derived From Coal Tar Pitch: Cheap Anode Materials For Lithium-Ion Batteries With Long Cycle Life And Enhanced Capacity, Yun-Xiao Wang, Shulei Chou, Hua-Kun Liu, S X. Dou
Australian Institute for Innovative Materials - Papers
From energy and environmental consideration, an industrial waste product, coal tar pitch (CTP), is used as the carbon source for Si/AC composite. We exploited a facile sintering method to largely scale up Si/amorphous carbon nanocomposite. The composites with 20 wt.% silicon with PVdF binder exhibited stable lithium storage ability for prolonged cycling. The composite anode delivered a capacity of 400.3 mAh g−1 with a high capacity retention of 71.3% after 1000 cycles. Various methods are used to investigate the reason for the outstanding cyclability. The results indicate that the silicon nanoparticles are wrapped by amorphous SiOx and AC in Si/AC …
Highly Uniform Tio2/Sno2/Carbon Hybrid Nanofibers With Greatly Enhanced Lithium Storage Performance, Zunxian Yang, Qing Meng, Zaiping Guo, Xuebin Yu, Tailiang Guo, Rong Zeng
Highly Uniform Tio2/Sno2/Carbon Hybrid Nanofibers With Greatly Enhanced Lithium Storage Performance, Zunxian Yang, Qing Meng, Zaiping Guo, Xuebin Yu, Tailiang Guo, Rong Zeng
Australian Institute for Innovative Materials - Papers
Highly uniform, relatively large area TiO2/SnO 2/carbon hybrid nanofibers were synthesized by a simple method based on thermal pyrolysis and oxidation of an as-spun titanium-tin/polyacrylonitrile nanoweb composite in an argon atmosphere. This novel composite features the uniform dispersion and encapsulation of highly uniform nanoscale TiO 2/SnO2 crystals in a porous carbon matrix. The high porosity of the nanofiber composite material, together with the conductive carbon matrix, enhanced the electrochemical performance of the TiO 2/SnO2/carbon nanofiber electrode. The TiO 2/SnO2/carbon nanofiber electrode displays a reversible capacity of 442.8 mA h g-1 for up to 100 cycles, and exhibits excellent rate capability. …
K0.25mn2o4 Nanofiber Microclusters As High Power Cathode Materials For Rechargeable Lithium Batteries, Chaofeng Zhang, Chuanqi Feng, Peng Zhang, Zaiping Guo, Zhixin Chen, Sean Li, Hua-Kun Liu
K0.25mn2o4 Nanofiber Microclusters As High Power Cathode Materials For Rechargeable Lithium Batteries, Chaofeng Zhang, Chuanqi Feng, Peng Zhang, Zaiping Guo, Zhixin Chen, Sean Li, Hua-Kun Liu
Australian Institute for Innovative Materials - Papers
K0.25Mn2O4 microclusters assembled from single-crystalline nanofibers were synthesized via a hydrothermal process at different temperatures. The possibility of using these materials as cathode material for lithium ion batteries was studied for the first time. The charge/discharge results showed that the K0.25Mn2O4 nanofiber microclusters synthesized at 120 degrees C exhibit excellent lithium storage properties, with a high reversible capability (360 mA h g-1 at current density of 100 mA g-1) and stable lithium-ion insertion/de-insertion reversibility. The charge/discharge mechanism in lithium ion batteries was studied and proposed for the …
Free-Standing Single-Walled Carbon Nanotube/Sno2 Anode Paper For Flexible Lithium-Ion Batteries, Lukman Noerochim, Jia-Zhao Wang, Shulei Chou, David Wexler
Free-Standing Single-Walled Carbon Nanotube/Sno2 Anode Paper For Flexible Lithium-Ion Batteries, Lukman Noerochim, Jia-Zhao Wang, Shulei Chou, David Wexler
Australian Institute for Innovative Materials - Papers
Free-standingsingle-walledcarbonnanotube/SnO2 (SWCNT/SnO2) anodepaper was prepared by vacuum filtration of SWCNT/SnO2 hybrid material which was synthesized by the polyol method. From field emission scanning electron microscopy and transmission electron microscopy, the CNTs form a three-dimensional nanoporous network, in which ultra-fine SnO2 nanoparticles, which had crystallite sizes of less than 5 nm, were distributed, predominately as groups of nanoparticles on the surfaces of singlewalled CNT bundles. Electrochemical measurements demonstrated that the anodepaper with 34 wt.% SnO2 had excellent cyclic retention, with the high specific capacity of 454 mAh g−1 beyond 100 cycles at a current …