Biotechnology Commons^™

Flowability And Handling Characteristics Of Bulk Solids And Powders—A Review With Implications For Ddgs, V. Ganesan, Kurt A. Rosentrater, Kasiviswanathan Muthukumarappan

Kurt A. Rosentrater

Much research regarding handling and storage characteristics of bulk solids has been conducted over the years. Physical properties of granular solids play a significant role in their resulting storage and flow behaviour, and are therefore essential to design appropriate, efficient, and economic bulk solids handling and storage equipment and structures. Distillers Dried Grains with Solubles (DDGS) is a bulk material that has been widely used as a protein source for ruminants and non-ruminants for more than two decades. Distillers grains are energy and nutrient dense, and are often used as a replacement for corn in animal diets. With the exponential …

Comparison Of Electrically Mediated And Liposome-Complexed Plasmid Dna Delivery To The Skin, Loree C. Heller, Mark J. Jaroszeski, Domenico Coppola, Richard Heller

Bioelectrics Publications

BACKGROUND: Electroporation is an established technique for enhancing plasmid delivery to many tissues in vivo, including the skin. We have previously demonstrated efficient delivery of plasmid DNA to the skin utilizing a custom-built four-plate electrode. The experiments described here further evaluate cutaneous plasmid delivery using in vivo electroporation. Plasmid expression levels are compared to those after liposome mediated delivery.

METHODS: Enhanced electrically-mediated delivery, and less extensively, liposome complexed delivery, of a plasmid encoding the reporter luciferase was tested in rodent skin. Expression kinetics and tissue damage were explored as well as testing in a second rodent model.

RESULTS: Experiments …

Determination Of Machining Parameters Of Corn Byproduct Filled Plastics, Kurt A. Rosentrater

Kurt A. Rosentrater

In a collaborative project between the USDA and Northern Illinois University, the use of ethanol corn processing by-products as bio-filler materials in the compression molding of phenolic plastics has been studied. This paper reports on the results of a machinability study in the milling of various grades of this material. Three types of samples were studied: 100%, 75% and 50% phenolic samples. The milling operation was carried out with a fixed depth of cut of 2.0 mm using a 12.5 mm diameter two-fluted end-mill. The cutting speed was varied between 120 and 160 m/min at feeds between 200 and 300 …

Flow Properties Of Ddgs With Varying Soluble And Moisture Contents Using Jenike Shear Testing, V. Ganesan, Kasiviswanathan Muthukumarappan, Kurt A. Rosentrater

Kurt A. Rosentrater

Distillers dried grains with solubles (DDGS) are an excellent source of energy, minerals, and bypass protein for ruminants and are used in monogastric rations as well. With the remarkable growth of the US fuel ethanol industry in the past decade, large quantities of distillers grains are now being produced. Flow of DDGS is often restricted by caking and bridging during its storage and transportation. In our previous works, the Carr powder tester was used to measure various flow properties of DDGS. The objective of this study was to measure the flow properties (cohesion, effective angle of friction, internal angle of …

Metabolic Engineering Of A Thermophilic Bacterium To Produce Ethanol At High Yield, A. Joe Shaw, Kara K. Podkaminer, Sunil G. Desai, John S. Bardsley, Stephen R. Rogers, Philip G. Thorne, David A. Hogsett, Lee R. Lynd

Dartmouth Scholarship

We report engineering Thermoanaerobacterium saccharolyticum, a thermophilic anaerobic bacterium that ferments xylan and biomass-derived sugars, to produce ethanol at high yield. Knockout of genes involved in organic acid formation (acetate kinase, phosphate acetyltransferase, and L-lactate dehydrogenase) resulted in a strain able to produce ethanol as the only detectable organic product and substantial changes in electron flow relative to the wild type. Ethanol formation in the engineered strain (ALK2) utilizes pyruvate:ferredoxin oxidoreductase with electrons transferred from ferredoxin to NAD(P), a pathway different from that in previously described microbes with a homoethanol fermentation. The homoethanologenic phenotype was stable for >150 generations …

Not Just Informative, But Necessary: Infusing Green And Sustainable Topics Into Engineering And Technology Curricula, Kurt A. Rosentrater, Elif Kongar

Kurt A. Rosentrater

Generally accepted duties of engineers and technologists encompass designing and implementing solutions to problems. When so doing, it is their responsibility to be cognizant of the impacts of their designs on, and thus their accountability to, not only society in general, but also subsequent effects upon the environment. They need to be able to concurrently satisfy these competing needs, as well as constraints specific to the design challenges at hand. Responding to these requirements are the growing fields of green engineering and sustainable engineering. Both of these areas encompass many concepts, ideas, and tools, all of which are essential information …

The Biomass Bandwagon: Three Ideas For Engineering And Technology Programs To Get Onboard, Kurt A. Rosentrater, Jerry Visser

Kurt A. Rosentrater

As society demands more energy and material goods, engineers and technologists will be relied upon to design and implement systems to produce and deliver these. There is growing interest in using renewable resources to produce fuels, chemicals, and finished products to meet these increasing needs. Additionally, popularity is gaining, both in research as well as industry, in developing and commercializing biobased products. Within this arena, there are tremendous opportunities for teaching innovations as well. To date, very limited discussions at ASEE regarding these potentials have occurred. The goal of this paper is to discuss possibilities for augmenting engineering and technology …

Modeling The Effects Of Value-Added Processing And Logistics Using Arena, Kurt A. Rosentrater, Elif Kongar

Kurt A. Rosentrater

Scarcity and cost of nonrenewable fossil fuels have been a growing focus of many energy-dependent nations, including the U.S., for the past couple of decades. There are mainly two ways to approach these problems: (1) reducing the energy dependency and/or (2) developing alternative means of energy production. Utilizing biofuels, which are renewable sources of energy, is a promising way to produce energy. But, as this industry grows, so too does the quantity of byproducts, which are known as DDGS. This paper discusses a model that has been developed to analyze the economic viability of DDGS processing, and includes both deterministic …

The Highly Similar Arabidopsis Homologs Of Trithorax Atx1 And Atx2 Encode Proteins With Divergent Biochemical Functions, Abdelaty Saleh, Raul Alvarez-Venegas, Mehtap Yilmaz, Oahn-Le, Guichuan Hou, Monther Sadder, Ayed Al-Abdallat, Yuannan Xia, Guoqinq Lu, Istvan Ladunga, Zoya Avramova

Nebraska Center for Biotechnology: Faculty and Staff Publications

Gene duplication followed by functional specialization is a potent force in the evolution of biological diversity. A comparative study of two highly conserved duplicated genes, ARABIDOPSIS TRITHORAX-LIKE PROTEIN1 (ATX1) and ATX2, revealed features of both partial redundancy and of functional divergence. Although structurally similar, their regulatory sequences have diverged, resulting in distinct temporal and spatial patterns of expression of the ATX1 and ATX2 genes. We found that ATX2 methylates only a limited fraction of nucleosomes and that ATX1 and ATX2 influence the expression of largely nonoverlapping gene sets. Even when coregulating shared targets, ATX1 and ATX2 may employ different …

Determining Machining Parameters Of Corn Byproduct Filled Plastics, Kurt A. Rosentrater, Andrew W. Otieno, Pratyusha Melampati

Kurt A. Rosentrater

In a collaborative project between the USDA and Northern Illinois University, the use of corn ethanol processing byproducts (i.e., DDGS) as bio-filler materials in the compression molding of phenolic plastics has been studied. This paper reports on the results of a machinability study in the milling of various grades of this material. Three types of samples were studied: 100% (0% DDGS), 75% (25% DDGS), and 50% (50% DDGS) phenolic samples. The milling operation was carried out with a fixed depth of cut of 2.0 mm using a 12.5 mm diameter two-fluted end-mill. The cutting speed was varied between 120 and …