Open Access. Powered by Scholars. Published by Universities.®

Life Sciences Commons

Open Access. Powered by Scholars. Published by Universities.®

Articles 31 - 60 of 94

Full-Text Articles in Life Sciences

Comparative Analysis Of Physiological Measurements And Environmental Metrics On Predicting Heat Stress Related Events, Mckenzie Lee Barlow Jun 2018

Comparative Analysis Of Physiological Measurements And Environmental Metrics On Predicting Heat Stress Related Events, Mckenzie Lee Barlow

Master's Theses

Exposure to high heat and humidity can lead to serious health risks, including heat exhaustion and heat stroke. Wet Bulb Globe Temperature (WBGT) and heat index have historically been used to predict heat stress events, but individualized factors are not included in the measurement. It has been shown that there is a relationship between cardiovascular measurements and heat stress, which could be used to measure heat stress risk on an individual level. Research has been done to find relationships between cardiovascular metrics in a workplace environment, however the study did not include the use of a controlled environment as a …


Effect Of Bioaugmentation Product Biowish® Aqua™ On Nitrogen Removal In Wastewater, Patrick Cassidy Kalvass Jun 2018

Effect Of Bioaugmentation Product Biowish® Aqua™ On Nitrogen Removal In Wastewater, Patrick Cassidy Kalvass

Master's Theses

Biological nutrient removal (BNR) from wastewater, and specifically nitrogen removal, is a growing concern to wastewater dischargers such as municipalities. Excess nutrients in effluent can create problems such as eutrophication, toxicity to aquatic life, and dissolved oxygen depletion in receiving waters. BNR systems have been installed in many locations with success, but their operation presents operational and financial demands greater than conventional biological treatment. Nitrogen removal is typically performed in sequential autotrophic nitrification and denitrification, which increases needed energy input, operational complexity, and therefore cost. Simultaneous nitrification-denitrification (SNdN) achieved in a single system has also been successfully implemented, however operational …


Safety Videos For Major Shop Equipment In Cal Poly Brae Lab 1, Trey Joseph Johnston Mar 2018

Safety Videos For Major Shop Equipment In Cal Poly Brae Lab 1, Trey Joseph Johnston

Agricultural Education and Communication

At California Polytechnic State University, San Luis Obispo, students from all majors can take a variety of classes in the BioResource and Agriculture Engineering Department (BRAE). It is essential for future high school mechanics educators to learn the basic shop tools and the importance of safety in the laboratory. In shop 1 of the BRAE Department, there are many different tools students will find in a mechanics classroom. The five main power tools are the Table Saw, Drill Press, Bench Grinder, Radial Arm Saw, and Disk/Belt Sander.

In BRAE 121 Agricultural Mechanics, students learn basic shop skills about lab safety …


Marine Gastrobot Final Design Report, Wesley B. Williams, Eric Kane Dreischerf, Tommy Nicholas Yath Jun 2017

Marine Gastrobot Final Design Report, Wesley B. Williams, Eric Kane Dreischerf, Tommy Nicholas Yath

Mechanical Engineering

The Marine Gastrobot sponsored by Dr. Christopher Kitts of the Cal Poly Center for Applications in Biotechnology was a research and development effort intended to explore the use of microbial fuel cell technology as a power source for underwater robots. Our team Ocean Locomotion succeeded in developing a first iteration of an underwater robotic platform suitable for microbial fuel cell integration. The primary feature of the design is its sinusoidal fin propulsion intended for benthic exploration with limited risk of entanglement. During the course of development, Ocean Locomotion explored the use of low power actuation methods and determined their limited …


Marine Biomass Analyzer, Kai Jay Staal, Brian Paris, Tyler Cottle Jun 2017

Marine Biomass Analyzer, Kai Jay Staal, Brian Paris, Tyler Cottle

Mechanical Engineering

This report documents the design, fabrication, and testing for a marine biomass analyzer. The goal of the project and constructed system was to determine the validity and efficacy of a process that could flatten benthic macrofauna to a consistent thickness such that a biomass for the collected sample could be accurately determined. The system that was built and tested consists of a drive train that turns a mill subassembly where the organisms are flattened, supply and collection spools that hold the white fabric and clear film used to capture the organisms, a collection zone where the sample is injected, and …


Expierience, Seong Bo Chang, Albert Chen, Emily Nguyen May 2017

Expierience, Seong Bo Chang, Albert Chen, Emily Nguyen

Computer Engineering

The name of this project is called “exPIERience” and the technological field of focus is virtual reality. We will be working on creating a virtual reality experience using the Oculus Rift for the Center of Coastal Marine Sciences (CCMS). The purpose of this system is to enable people to experience diving at the Cal Poly Pier even during nonoptimal diving conditions which occur frequently. CCMS hopes to attract further interest and possible momentum in future outreach such as a “Live Dive” program, where live videos of divers under the pier can be streamed. A 360° video from the diver’s perspective …


Photovoltaic Cooking In The Developing World, Tyler Watkins, Christopher O'Day, Omar Arriaga Dec 2016

Photovoltaic Cooking In The Developing World, Tyler Watkins, Christopher O'Day, Omar Arriaga

Mechanical Engineering

The challenge of clean cooking is faced by hundreds of millions of people worldwide. We present a cooking technology consisting of a solar panel directly connected to an electric heater in a well-insulated chamber. Assuming continued decrease in solar panel prices, we anticipate that in a few decades Solar Electric Cooking technologies will be the most common cooking technology for the poor. Appropriate use of insulation reduces the power demand making low-power Insulated Solar Electric Cooking systems already cost competitive.


Weights And Balances: Integrating Models For Prevention And Response To Southern California Offshore Oil Spills, Carmen Watts Clayton, Amoret Bunn Oct 2016

Weights And Balances: Integrating Models For Prevention And Response To Southern California Offshore Oil Spills, Carmen Watts Clayton, Amoret Bunn

STAR Program Research Presentations

Licensing offshore oil and gas reserves in the United States waters are overseen by the U.S. Department of the Interior’s Bureau of Safety and Enforcement (BSEE). The licensing application includes planning for any worst-case oil spill scenario between BSEE and the applicant based on lessons learned from historic offshore spills such as the Deepwater Horizon (2010), Exxon Valdez (1989), and the Union Oil Platform Blowout (1969). The process for planning to respond to oil spills involves coordination with multiple agencies, trustees, and stakeholders to ensure that oil spill responses consider multiple factors, including ecologically sensitive species, commercial transportation and fisheries, …


Studying The Effects Of Serpentine Soil On Adapted And Non-Adapted Species Using Arduino Technology, Kiana Saniee, Edward Himelblau, Brian Paavo Oct 2016

Studying The Effects Of Serpentine Soil On Adapted And Non-Adapted Species Using Arduino Technology, Kiana Saniee, Edward Himelblau, Brian Paavo

STAR Program Research Presentations

Abstract: Serpentine soils are formed from ultramafic rocks and are represent an extreme environment for plants. Serpentine soils are unique in that they carry high concentrations of heavy metals, are nutrient deficient, particularly in calcium, and have poor water retention capabilities. Although these soils constitute harsh conditions for plant growth, there are a number of species that are adapted and even endemic to serpentine soil. Water retention by commercial potting mix was compared with serpentine soil. Also, serpentine adapted and non-adapted species were grown in both soil treatments and physiological data were collected. We used the Arduino electronic platform to …


Gc Verification Of The Spacecraft Atmosphere Monitor, Jessica S. Castro, Richard D. Kidd, Jeffrey D. Hein Sep 2016

Gc Verification Of The Spacecraft Atmosphere Monitor, Jessica S. Castro, Richard D. Kidd, Jeffrey D. Hein

STAR Program Research Presentations

International Space Station crew members face the unique challenge of maintaining air quality due to the volatile organic compounds (VOCs) that have the potential to accumulate at unsafe levels. The Spacecraft Atmosphere Monitor (SAM) is a miniature gas chromatograph/mass spectrometer (GCMS) designed to measure major constituents (such as N2, O2 and CO2) and trace VOCs within the cabin of the spacecraft. The gas chromatograph is responsible for separating the sample into its components in order to be characterized. The oven of the gas chromatograph must reach a temperature of 150°C in order to heat constituents …


Crop Selection, Cost Analysis, And Irrigation System Design For The Replanting Of A Nut Orchard, Maximilian Bricker Jun 2016

Crop Selection, Cost Analysis, And Irrigation System Design For The Replanting Of A Nut Orchard, Maximilian Bricker

BioResource and Agricultural Engineering

This report was made to help the landowner of Bricker Farms make decisions regarding the replanting of his orchard. The decisions that need to be made in this process include: which crop to plant, how to plant it, and how to improve the distribution uniformity of irrigation water on the orchard. The report does not give definitive final decisions, but presents viable options that the landowner can utilize when deciding. In addition to the options that are presented, the report offers suggestions to the landowner so that the replanting process is done properly in a timely and economically-friendly manner.


Reducing Food And Packaging Waste Through Developing Edible Fruit Based Packaging Prototypes, Melanie Thatcher Jun 2016

Reducing Food And Packaging Waste Through Developing Edible Fruit Based Packaging Prototypes, Melanie Thatcher

Materials Engineering

Packaging is used to contain, preserve, protect, and advertise both manufactured and natural products. In 2013 it was reported that over thirty percent of solid waste in the United States was from packaging. One way to reduce the impact of packaging on the environment is to create a solution that is edible and sourced from a waste or secondary food product that is not currently being utilized. Food-contact packaging made from recycled materials must meet strict U.S. Food and Drug Administration (FDA) regulations to be utilized as raw material for packaging. Fruit pomace is a candidate material since it may …


Prosthetic Socket Cooling System, Benjamin K. Kraw, Kathy Ha, Derek Piastrelli, Cuong Lai Jun 2016

Prosthetic Socket Cooling System, Benjamin K. Kraw, Kathy Ha, Derek Piastrelli, Cuong Lai

Mechanical Engineering

A team of four senior-level undergraduate students in the Interdisciplinary Senior Project Design course in the Engineering Department of California Polytechnic State University: San Luis Obispo have worked to develop a prosthetic socket cooling system, namely for veteran Taylor Morris and exclusively for a transfemoral prosthetic socket, under the Quality of Life+ Laboratory. This cooling system will utilize the thermoelectric effect known as the Peltier effect to transmit heat generated from the residual limb to the surrounding environment by means of forced convection over small aluminum heat sinks. Two measurement devices have also been developed to, one, measure the heat …


Physical Testing Of Potential Football Helmet Design Enhancements, Michael Jeremy Schuster Jun 2016

Physical Testing Of Potential Football Helmet Design Enhancements, Michael Jeremy Schuster

Master's Theses

Football is a much loved sport in the United States. Unfortunately, it is also hard on the players and puts them at very high risk of concussion. To combat this an inventor in Santa Barbara brought a new design to Cal Poly to be tested.

The design was tested in small scale first in order to make some preliminary conclusions about the design. In order to fully test the helmet design; however, full scale testing was required. In order to carry out this testing a drop tower was built based on National Operating Committee on Standards for Athletic Equipment, NOCSAE, …


Production And Harvest Of Microalgae In Wastewater Raceways With Resource Recycling, Alexander Colin Roberts Dec 2015

Production And Harvest Of Microalgae In Wastewater Raceways With Resource Recycling, Alexander Colin Roberts

Master's Theses

Microalgae can be grown on municipal wastewater media to both treat the wastewater and produce feedstock for algae biofuel production. However the reliability of treatment must be demonstrated, as well as high areal algae productivity on recycled wastewater media and efficient sedimentation harvesting. This processes was studied at pilot scale in the present research.

A pilot facility was operated with nine CO2-supplemented raceway ponds, each with a 33-m2 surface area and a 0.3-m depth, continuously from March 6, 2013 through September 24, 2014. The ponds were operated as three sets of triplicates with two sets continuously fed …


Designing A Remote Aerial System To Image And Analyze The Health Of Grape Crops At Cal Poly San Luis Obispo, Alexander D. Vice, Dylan Benton, Adipratnia Asmady, Andrew Mercier, Andrew Meyer, Eric Belfield, Aaron Drake Aug 2015

Designing A Remote Aerial System To Image And Analyze The Health Of Grape Crops At Cal Poly San Luis Obispo, Alexander D. Vice, Dylan Benton, Adipratnia Asmady, Andrew Mercier, Andrew Meyer, Eric Belfield, Aaron Drake

STAR Program Research Presentations

In the last decade the prevalence of unmanned aerial vehicles (UAVs) has exploded; however, the presence of UAVs in research situations is still a relatively new and untested field. The autonomous flight lab (AFL) at Cal Poly San Luis Obispo is a new lab site that is dedicated to using UAVs to benefit research for all backgrounds. Before AFL was able to fly missions we first needed to actually receive our vehicles, create a lab space that would provide all of the necessary resources and equipment necessary to fly, and to be granted permission by the Federal Aviation Administration (FAA) …


Wireless Sensor Mesh Network For Irrigation Systems, Rosana Cheruvelil, Oswaldo Garcia, Nabil Haque, Justin Ignacio, Stanley Thomas Jun 2015

Wireless Sensor Mesh Network For Irrigation Systems, Rosana Cheruvelil, Oswaldo Garcia, Nabil Haque, Justin Ignacio, Stanley Thomas

Electrical Engineering

Pepper Oak Farms, a company that grows their own olives for olive oil and has approximately 40,000 olive trees, is in need of an efficient way to monitor the soil and atmospheric conditions that are critical to the cultivation of their trees. The company at the moment only has two sensors and has to manually place the sensors at different locations to collect data on soil moisture and temperature. This is expensive, time consuming, and a lot of effort on the owner’s part to go out on the fields to collect this data. As a solution, the company would like …


Sports For Nathan, Delaney Bales, Joseph Garrett, Chris Harter Jun 2015

Sports For Nathan, Delaney Bales, Joseph Garrett, Chris Harter

Mechanical Engineering

Nathan Cooper is a local boy with spinal muscular atrophy. He enjoys playing games and being active. One assistive device that Nathan uses is his Standing Dani, a motorized mobile stander. Nathan enjoys playing golf and kickball, and prior to this project he had no way of playing golf and no safe way of playing kickball. The purpose of this project was to design and build a golf attachment for Nathan’s Standing Dani that allows him to putt, and a kickball attachment that allows him to play kickball safely. First, the design team researched and defined the problem in terms …


Fresh Bytes - Connected Hydroponics For Small-Scale Growing, Jack Bowen Dec 2014

Fresh Bytes - Connected Hydroponics For Small-Scale Growing, Jack Bowen

Liberal Arts and Engineering Studies

Many users are now transitioning to small-scale hydroponics and aquaponics at home. There can be a barrier to entry with these systems as there is a delicate balance of chemicals, pH, etc. that must be maintained. There are sensors for these various components but they are either aimed at commercial production or are un-automated. Fresh Bytes is a microcomputer with sensors to detect all of these unseen components in a hydroponic system. A prototype of this microcomputer is produced along with CAD plans for more professional versions of it. The sensors are verified and future development is contemplated.


Wildlife Deterrence Method Test Device, Garrett Tietz, Adam Webb, Dane Knutson Dec 2014

Wildlife Deterrence Method Test Device, Garrett Tietz, Adam Webb, Dane Knutson

Mechanical Engineering

The objective of the Deer Busters team is to design and build a device or system of devices that will be used to determine which method, or methods, are most effective at deer deterrence. JumpSport suspects that a method which gives the appearance of approach to the deer in an aggressive or startling manner but also changes the way it attacks so that the deer do not get used to the device will be most effective. Deer Busters is committed to the completion of the deer deterrent testing device by the end of the fall quarter of 2014.


Methane Production By A Packed-Bed Anaerobic Digester Fed Dairy Barn Flush Water, Sean Richard Thomson Dec 2014

Methane Production By A Packed-Bed Anaerobic Digester Fed Dairy Barn Flush Water, Sean Richard Thomson

Master's Theses

Packed-bed digesters are an alternative to covered lagoon digesters for methane production and anaerobic treatment of dilute wastewaters such as dairy barn flush water. The physical media of packed-beds retain biofilms, often allowing increased treatment rates. Previous studies have evaluated several types of media for digestion of dilute wastewaters, but cost and media fouling have setback commercial development. A major operational cost has been effluent recirculation pumping.

In the present effort, a novel approach to anaerobic digestion of flush dairy water was developed at pilot-scale: broken walnut shells were used as a low-cost packed-bed medium and effluent recirculation was replaced …


Development Of A Public Education Website: Building Bridges Over Water, Angelina Mckee Jul 2014

Development Of A Public Education Website: Building Bridges Over Water, Angelina Mckee

Agricultural Education and Communication

Website created by Angelina McKee to educate the public about water resource issues. Water is the basic unit of life, water resources are the basis for what societies and ecosystems are founded upon. Water shortages and droughts are more prevalent in our ever-changing world. It is no shock that there are discrepancies between various stockholders on either sides of the dry riverbed. This senior project resulted in the development of a website that addresses global water resources, water use in California, water conservation, and water allocation. The website informs the public on water resources and related issues and will hopefully …


Ultraviolet Led Biofouling Mitigation, Andrew Lam Jun 2014

Ultraviolet Led Biofouling Mitigation, Andrew Lam

Computer Engineering

The goal is to determine if low-cost UV LEDs can mitigate marine biofouling on small glass or acrylic camera lenses. A microprocessor-controlled experimental setup to control the illumination of low-cost UV LEDs of various wavelength and packaging was fashioned. The system consists of a programmed microcontroller, a manufactured LED breakout interface, and a submergible UV LED array enclosed in a borosilicate glass tube. A preliminary qualitative assessment of four different UV LEDs was conducted during a three-week deployment of the experimental setup in the raw seawater system at the Cal Poly Center for Costal and Marine Sciences in Avila Beach, …


Developent Of A Phospholipid Encapsulation Process For Quantum Dots To Be Used In Biologic Applications, Logan Grimes Jun 2014

Developent Of A Phospholipid Encapsulation Process For Quantum Dots To Be Used In Biologic Applications, Logan Grimes

Master's Theses

The American Cancer Society predicts that 1,665,540 people will be diagnosed with cancer, and 585,720 people will die from cancer in 2014. One of the most common types of cancer in the United States is skin cancer. Melanoma alone is predicted to account for 10,000 of the cancer related deaths in 2014. As a highly mobile and aggressive form of cancer, melanoma is difficult to fight once it has metastasized through the body. Early detection in such varieties of cancer is critical in improving survival rates in afflicted patients. Present methods of detection rely on visual examination of suspicious regions …


Project Proposal And Development Plan For A New Security Gate At Swanton Pacific Ranch, K. Morgan Perry Jun 2014

Project Proposal And Development Plan For A New Security Gate At Swanton Pacific Ranch, K. Morgan Perry

Agricultural Education and Communication

The purpose of this project was to develop a prototype gate for Cal Poly’s Swanton Pacific Ranch in Santa Cruz, CA. Swanton Pacific Ranch requested that the author design and build a 21’x5’ single-retractable gate for Swanton Pacific Ranch to help decrease the security issues that have recently arisen at the facility. The design and format of this project are focused towards the desires and goals set forth by Swanton Pacific Ranch and the Operations Manager, Steve Auten in order to obtain a certain outcome. This project provides an outline of what needs to be done in order to produce …


Smooth Muscle Cell Organization In The Stem Region Of The Gracilis Collateral Circulation, Amanda Krall Jun 2014

Smooth Muscle Cell Organization In The Stem Region Of The Gracilis Collateral Circulation, Amanda Krall

Biomedical Engineering

Many patients who suffer from the ischemic Peripheral Arterial Occlusive Disease (PAOD) experience intermittent claudication, which can be attributed to impaired vasodilation. Collateral vessels are the primary site of resistance to blood flow downstream; therefore maximizing vasodilation in collaterals is crucial for efficient circulation. Collaterals function as natural bypasses around the occluded arteries and the increase in flow into these vessels causes them to outwardly remodel into conduit vessels. However, functional vasodilation in the stem region of collateral vessels is impaired at day 7 following femoral ligation, which can be attributed to smooth muscle cell malfunction. However, the increase in …


Adaptive Basketball Shooter - Final Project Report, Jenna N. Becker, Richard A. Galanti, Justin D. Haley, Brett Y. Nayudu Jun 2014

Adaptive Basketball Shooter - Final Project Report, Jenna N. Becker, Richard A. Galanti, Justin D. Haley, Brett Y. Nayudu

Mechanical Engineering

The Friday Club is a joint venture between the Cal Poly Kinesiology Department and the San Luis Obispo Special Olympics that offers people with varying degrees of disability the opportunity to meet weekly and learn various sports and games. At Friday Club, athletes in wheelchairs with limited arm strength use devices built by Cal Poly mechanical engineering students in order to participate in various sports. Many devices are designed to attach to the Universal Play Frame (UPF), a wheel-chair attachment. The purpose of this project was to design and build a UPF device that will launch a basketball, so that …


Team Joseph: Adaptive Aquatic Device, Paul Sands, Lilly Hoff, Andrea Voigt Jun 2014

Team Joseph: Adaptive Aquatic Device, Paul Sands, Lilly Hoff, Andrea Voigt

Mechanical Engineering

The scope of this project included designing and fabricating an adaptive aquatic device for Joseph, a 20 year old student in the Special Education Program at San Luis Obispo High School with a subset of cerebral palsy known as spastic quadriplegia. The project was presented at the beginning of the Fall 2013 quarter to the mechanical engineering students at Cal Poly with the aspiration that a team of engineers would construct a device that would allow Joseph, his friends and family to compete in their first triathlon on July 27, 2014. The project was humbly accepted by mechanical engineering students …


Optimization Of Growth Parameters For Algal Regrowth Potential Experiments, Chadwick D. Boggess Jun 2014

Optimization Of Growth Parameters For Algal Regrowth Potential Experiments, Chadwick D. Boggess

Master's Theses

Water cost is one of the key deterrents in making algal biofuels a feasible alternative to traditional petroleum fuels. Research into recycling of algal media was conducted in a laboratory setting at the California Polytechnic State University in San Luis Obispo. A growth assay was created to allow for algal cultures, specifically Ward’s Chlorella sp., to proliferate in sealed culture vessels. Bold’s Basal Medium (BBM) was selected as the media due to its extensive use with freshwater algal strains. However, this medium can limit algal growth through nutrient limitation and it became necessary to augment the original recipe. 50mM …


Cal Poly Library Of Pyroprints: Quality Control Analysis And Web Development, Chase Ricketts Mar 2014

Cal Poly Library Of Pyroprints: Quality Control Analysis And Web Development, Chase Ricketts

Computer Science and Software Engineering

No abstract provided.