Operations Research, Systems Engineering and Industrial Engineering Commons^™

A Multi-Objective Stochastic Programming Model For Resilient And Sustainable Supply Chains Under Uncertainty, Mohammad H. Majdfaghihi

Dissertations

Supply chain resilience (SCRES) and sustainable supply chain management (SSCM) have garnered significant attention in the field of Supply Chain Management (SCM) science. This heightened interest is largely attributable to the increasing frequency and severity of uncertainty and disruptions in global supply chains. Resilience is a beneficial approach to managing uncertainties and preparing for and mitigating the adverse consequences of Supply Chain (SC) disruptions. Sustainability is a key concept in SCM, driven by governmental regulations and heightened stakeholder and customer concerns for environmental and societal well-being. Studies on SCRES have traditionally focused on preparing for and reacting to disruptions and …

Sustainable Development: A Data Analysis Investigation For A New Conceptual Model, Case Study Comparison And Validation Techniques, Tiffanie Marie Toles

Doctoral Dissertations

"The three pillars model for sustainability, often represented with three intersecting circles described as economic, environmental, and social factors with sustainability being at the center is a complex and philosophically open model [1]. As society promotes efforts to reduce carbon impacts, there becomes a need to critically review the models employed for understanding. This research presents a validated methodology, an updated conceptual configuration of sustainability for overall use, as well as a sustainable development performance measurement system. Using the 2020 Sustainable Development Goals Index Data, 232 indicators from 193 countries were used to evaluate the efficacy of using more than …

Energy Digital Twins In Smart Manufacturing Systems, Anna Billey

Graduate Theses, Dissertations, and Problem Reports

In this thesis, an Energy Digital Twin for smart manufacturing systems was developed and evaluated. In particular, the study focused on bidirectional parameter communication between the physical and the virtual part with the aim of optimizing the energy used in the manufacturing process. Rising costs and the environmental impacts related to energy consumption have grown in importance worldwide. There are elevated concerns in sectors like manufacturing, leading to an urgent quest to reduce energy consumption. A recent advancement in Industry 4.0 technology, the Digital Twin, represents a promising smart technology and tool that researchers are investigating to help reduce energy …

Part Design Geometry-Driven Toolpath Optimization For Additive Manufacturing Energy Sustainability Improvement, David Kolawole Somade

Graduate Research Theses & Dissertations

One of the most promising new manufacturing technologies in the past three decades isadditive manufacturing (AM), also commonly known as three-dimensional (3D) printing or rapid prototyping. The energy consumption problem in AM can be significant when it is adopted at the industrial scale or used under resource-restricted conditions. The energy consumption of an AM process is influenced by several factors including bed heating, filament extrusion, material infill, component cooling, etc. All these factors are further determined by the equipment and the toolpath for a specific printing task. Build orientation and tool-path direction are frequently used to optimize part and process …

Improving Logistics Efficiency Through Collaborative Truck Routing, Patrick Dougherty

Industrial Engineering Undergraduate Honors Theses

The logistics industry is among the world’s largest and most essential. Specifically, trucking is a massive component of the modern logistics system. In 2012, truck transportation carried 68% of all freight tonnage in the U.S. However, trucking currently faces significant problems with efficiency and sustainability. Of all miles driven by trucks yearly in the U.S., 25% are driven with empty loads and 36% are driven with underutilized loads. In addition to this economic inefficiency, the industry faces social and environmental challenges. Driver turnover rates are near 100%, and trucking accounts for a significant level of greenhouse gas emissions. One potential …

Resilient Design And Crisis Management, Rich Ham

Operations Management Presentations

Explores the techniques to design resilience into systems, business functions, compliance, quality assurance and response to uncertainty. Includes an overview of Federal Emergency Management Agency principles in resilient design and crisis management, including implementation of National Incident Management System processes and industry standards to frame resilient design, procedures and planning documents. Learn to focus on the use of testing, exercises, and implementation of Plan, Do, Check, Act model to continually improve government, business and personal continuity through periods of cascading uncertainty.

Robust And Sustainable Energy Pathways To Reach Mexico’S Climate Goals, Rodrigo Mercado Fernandez

Doctoral Dissertations

As countries set climate change goals for adaptation and mitigation efforts, there are many questions regarding to how to reach these targets. These efforts will necessitate the transition of our electricity infrastructure from relying on conventional electricity generation technologies including natural gas, coal and oil, to clean energy generation with renewables. Through the three essays presented in this dissertation, we explore various pathways of development for the electricity system to reach long term climate change goals. We are interested in identifying: Is there a unique optimal development option or are there various? How do different mixes of electricity generation technologies …

A Comprehensive And Absolute Corporate Sustainability Assessment And Enhanced Input Output Life Cycle Assessment, Joseph M. Wright

Dissertations

Stresses due to economic activity are threatening to exceed environmental and societal limits with the potential to jeopardize local communities and create global crises. This research proposes new methodologies and analytic techniques to comprehensively assess corporate sustainability and enhance the efficiency of estimating environmental and social impacts with Input Output Life Cycle Assessment (IOLCA).

Sustainability assessments and management require consideration of both social and environmental impacts as outflows of economic activity. There are a number of assessment tools available to gain insight into environmental and social impacts; but in most cases, these approaches lack essential components for a comprehensive and …

Modeling Of Electrical Grid Systems To Evaluate Sustainable Electricity Generation In Pakistan, Muhammad Mustafa Amjad

Masters Theses

Pakistan has always had a history of severe energy shortfalls, which rose up to an alarming 33% in 2013. This situation was countered by investments in the energy sector through the China Pakistan Economic Corridor (CPEC), which were unfortunately largely based on brown fuels. Although beneficial in the short term, these investments do not bode well for the climate scenario of Pakistan, with various parts of the country already having experienced temperatures rise of 1-3°C. To ensure that the current situation doesn’t exacerbate and is tackled in a timely manner, this research aims to examine how the untapped potential of …

Sustainability-Based Expert System For Additive Manufacturing And Cnc Machining, Josage Chathura Pamuditha Perera

Graduate Theses, Dissertations, and Problem Reports

The development of technologies which enable resource efficient production is of paramount importance for the continued advancement of the manufacturing industry. In order to ensure a sustainable and clean energy future, manufacturers should be able to contrast and validate existing manufacturing technologies on a sustainability basis. In the post COVID-19 era of enterprise management, the use of artificial intelligence to simulate human expert decision making abilities will open new doors to achieving heightened levels of productivity and efficiency. The introduction of innovative technologies such as CNC machining and 3D printing to production systems has redefined the manufacturing landscape in a …

Natural Resources Governance Employing Blockchain-Based Decision-Making, Farinaz Sabz Ali Pour, Adrian Gheorghe

Engineering Management & Systems Engineering Faculty Publications

Natural resources are essential structures of socio-economic systems which shape the well-being of humanity, environment, and the economy. Human actions have become the critical responsibility for environmental changes and pressuring many planetary boundaries. Having a systematic approach can provide a governance platform including the inherent characteristics of the resource, the historically established form of use, and transaction costs. A natural resource governance framework is developed by applying Blockchain technology as the primary goal of this study to regulate and manage the extraction and trades. Blockchain technology provides a distributed concurrency monitoring system for sustainable resource management. Persistent and pervasive cooperation …

Aligning Skills In Personnel With The Lean System's Requirements, Anjushree Bangre

Masters Theses

The sustainability of lean systems for long term is a major concern across various organizations implementing lean manufacturing methods. This issue can be attributed to inadequate infrastructure, inefficient process management, unsuitable personnel management methods and strategic tools. There is a strong need for addressing the risks for lean system sustainability. The resolution of the risks from a 'soft side' (people) perspective has not been addressed. The primary focus of this study is on the people-related risks.

The current study elicits a five-phase approach to enhance the implementation of the lean system by accounting for these risks. The first phase classifies …

Modular Product Architecture’S Decisions Support For Remanufacturing-Product Service System Synergy, Johnson Adebayo Fadeyi

Wayne State University Dissertations

Remanufacturing is identified as the most viable product end-of-life (EOL) management strategy. However, about 80% of manufactured products currently end up as wastes. Besides other benefits, the product service system (PSS) could curtail the main bottlenecks to remanufacturing namely quantity, quality, recovery time of used product, and negative perception of remanufactured products. Therefore, the integration of PSS and remanufacturing has been increasingly recommended as an enhanced product offering. However, an integration that is informed by mathematical analysis is missing. Meanwhile, the variables that bolster the performance of PSS and remanufacturing are substantially influenced by product development (PD) decisions. Among the …

Modeling The Economic And Environmental Performance Of Offshore Wind Energy, Alexana Cranmer

Doctoral Dissertations

Offshore wind is a growing source of energy globally. Like any energy technology, it has impacts on the environment. In the case of renewable energy, we need a way to consider the environmental benefits as well as the environmental costs. This dissertation develops a set of models to examine the economic and environmental costs and benefits and the trade-offs between them. We ask how much offshore wind energy should be sited, and where should that offshore wind energy be located? The first model estimates the economic impact of wake interactions between wind farms. Wind farm sites are chosen through a …

Database Design For The Collection And Visualization Of Sustainabilty Data, Henry A. Kozlowski, Nikhila Perugupalli

Industrial and Manufacturing Engineering

The goal of the project was to create a database that would be a repository for the high volume of sustainability data Illumina would like to collect. To couple with the database the project team’s goal was to design a system for visualizing the data graphically. Illumina required a database system that would be user-friendly, easy to add, delete, and edit data inputs, as well as a program that would allow the user to easily sort and graph data. The intent of the graphical representation of the data is to publish the graphs in a monthly report that would be …

Using The Triple Bottom Line To Select Sustainable Suppliers For A Major Oil And Gas Company, Pandarinath Adarsh Sunkari

Graduate Theses and Dissertations

Companies have primarily been focusing on the financial bottom line i.e., on increasing profits by increasing revenues and reducing costs. With high energy usage and environmental change posing threats to the environment and business operations, companies are now considering sustainability. Since some global suppliers have low cost labor, Social well-being and human development has also emerged as major goals of a company performing global operations. Focusing on these three goals is termed the "Triple Bottom Line" (TBL). We study and explore the TBL benefits that could be realized by an oil and gas company by focusing on sustainable suppliers. A …

Incorporating Environmental And Social Factors Into Decision-Making Of An Oil And Gas Industry To Improve Sustainability, Gaurav Dabhadkar

Graduate Theses and Dissertations

The energy industry (including the oil and gas industry) is facing unparalleled scrutiny and demands from stakeholders including investors, regulators (industry and environmental), communities, and other stakeholders. Sustainable development is one of the major concerns of the oil and gas industry. Companies are seeking to increase sustainability of their operations by considering environmental and Social concerns in addition to economic concerns. Oil and gas companies need to take decisions at different stages of the product life cycle (e.g. planning, design, exploration, production, and clean-up) which have direct or indirect impact on the organization's objectives. Addressing economic, technical, Social, and environmental …

Applying Sustainability From A Systems Perspective:, Timothy Brophy

Master's Theses

Becoming sustainable is no longer an option. Current industry methods will not be able to support the necessary changes our growing society demands. In order to keep up with ever increasing demands industry will be aimed toward making major system changes toward a fully sustainable model. As of right now only basic sustainability actions have been put in place. Industry needs to make a strategic change toward resilient systems with an end goal of evolving into fully biomimic systems. This thesis covers a brief history of production leading to the Industrial Revolution which created a need for increased sustainability efforts. …

Sustainable Purchasing Practices: An Investigation Into Current Industry Awareness And Practice, Frank Palisi, Kathryne Newton, Edward Sweeney

Conference papers

This research study illustrates the importance of sustainable purchasing practices for organizations in the U.S. distribution industry and answers several important questions: what is the current awareness of U.S. organizations regarding sustainable purchasing practices; to what extent are U.S. organizations evaluating, selecting, and retaining suppliers based upon sustainable purchasing practices; and to what extent are sustainable purchasing practices being implemented by the U.S. organizations under study? With an ever increasing global economy, is it critically important for organizations to put in place sustainability practices; the biggest impact organizations can make is often in an organization’s purchasing department. The researcher begins …

Sustainability For Die Manufacturing: Comparative Study Of Wedm And Milling, Matthew S. Kalus

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Sustainability is more important in today's culture due to the increasing demand for a more eco-friendly society. Concentrations in minimizing and reducing environmental impacts, energy and natural resources have been forthcoming in industry. The tool, mold and die industries are the most well known industries that machine harder materials using mills and WEDM. The objective of this thesis was to compare the sustainability differences in both of these machines utilizing the accepted standards for evaluating the manufacturing process performance for sustainability. These standards include the evaluation of the process parameters, raw materials, power, tools and fluids which all contribute to …

Sustainable Purchasing Practices: An Investigation Into Current Industry Awareness And Practice., Francis X. Palisi

Purdue Polytechnic Masters Theses

This research study illustrates the growing importance of sustainable purchasing practices and answers two important questions: what is the current awareness of U.S. organizations on sustainable purchasing practices with regards to evaluating, selecting, and retaining suppliers and to what extent are these practices being implemented? The research conducted is based upon an in-depth literature review of green purchasing and sustainability initiatives. With an ever increasing global economy with no intention of slowing down it is ever important to look towards sustainability practices and the biggest impact organizations can make is in the purchasing department. The researcher begins by explaining their …

A Model To Integrate Sustainability Into The User-Centered Design Process, Adrienne Shevonne Brown

Electronic Theses and Dissertations

With concerns for the environment becoming more prevalent in business and the government, it is increasingly important to re-evaluate and update processes to include sustainability considerations early in the design process. In response to this charge, this research effort was designed to integrate sustainability factors into the usercentered design process. The results of this research highlight the benefits of sustainability requirement planning, as well as those derived from integrating sustainability into the current user-centered design model

Component Obsolescence Risk Assessment, Craig Josais, Janis P. Terpenny, Kenneth J. Mclean

Janis P. Terpenny

Custom low volume products and systems, such as those utilized by military and avionics applications; often make use of commercial high-tech components. In the past decade, technology has advanced very rapidly causing such components to have a shortened life span. Newer and better technologies are being introduced frequently, rendering components obsolete. Yet, custom low volume products and systems such as ships, submarines and aircraft can be in use for decades. Being proactive about obsolescence is critical to maintaining fully capable products and systems and satisfied customers. This paper presents an obsolescence risk measurement tool that is being developed to better …