Operations Research, Systems Engineering and Industrial Engineering Commons^™

Energy-Climate-Manufacturing Nexus: New Insights From The Regional And Global Supply Chains Of Manufacturing Industries, Murat Kucukvar, Bunyamin Canseva, Gokhan Egilmez, Nuri C. Onat, Hamidreza Samadi

Mechanical and Industrial Engineering Faculty Publications

The main objectives of this research are to improve our understanding of energy-climate-manufacturing nexus within the context of regional and global manufacturing supply chains as well as show the significance of full coverage of entire supply chain tiers in order to prevent significant underestimations, which might lead to invalid policy conclusions. With this motivation, a multi region input–output (MRIO) sustainability assessment model is developed by using the World Input–Output Database, which is a dynamic MRIO framework on the world’s 40 largest economies covering 1440 economic sectors. The method presented in this study is the first environmentally-extended MRIO model that harmonizes …

Photovoltaic Cooking In The Developing World, Tyler Watkins, Christopher O'Day, Omar Arriaga

Mechanical Engineering

The challenge of clean cooking is faced by hundreds of millions of people worldwide. We present a cooking technology consisting of a solar panel directly connected to an electric heater in a well-insulated chamber. Assuming continued decrease in solar panel prices, we anticipate that in a few decades Solar Electric Cooking technologies will be the most common cooking technology for the poor. Appropriate use of insulation reduces the power demand making low-power Insulated Solar Electric Cooking systems already cost competitive.

Design And Implementation Of A Fixture For Robotic Welding, Isaac Nathaniel Williams

Industrial and Manufacturing Engineering

The Cal Poly IME department recently purchased a robotic welder. The faculty would like to see this robot incorporated into the welding class. The robot was capable of moving, but was not able to perform a weld prior to this project. This problem is addressed by creating a demonstration part for the welding class. The objectives that need to be complete for this to be possible is designing a part, designing a fixture, analyzing the cost of robotic welding, and implement welding the part in the class. The part is designed with specific requirements in mind. The fixture is designed …

Mri Upgrades At Radiology Associates, Patrick Cheung, Charlene Donlon

Industrial and Manufacturing Engineering

Problem Statement: The MRI machines at Radiology Associates are limiting the company’s ability to expand and compete within the local market. After discussing with technicians and managers at Radiology Associates, we decided to focus on hardware and software upgrades for the MRI machines. With 2 of the 3 locations purchasing new machines in the near future, our focus was on upgrades at the Santa Maria facility. The two machines at this location needed hardware and/or software upgrades to remain on par competitively both within the company and with local scanning options. Flexible coils are beneficial in terms of size, weight, …

Development Of A Process Monitoring Tool For The Manufacturing Process Of An Electric Vehicle Battery Enclosure, Ian Lamond

Industrial and Manufacturing Engineering

High volume manufacturing requires process control that is responsive to manufacturing related issues. It is critical that tools and resources are implemented that gauge manufacturing performance and identify root cause issues.

This project focuses on the design and manufacturing process of an electric vehicle aluminum battery enclosure and the implementation of a production measurement system. The current problem is a lack of process control communication and out of control alarms when uncontrolled events occur for manufacturing associates at the battery enclosure manufacturing work station.

This report examines the core principles of Quality Engineering, the economic advantages of implementing a vision …

Application Of Gearbox Drivetrains For Commuting Bicycles, Loren Sunding

Industrial and Manufacturing Engineering

People all over the world are beginning to ride their bicycles more often to destinations which include work, school, and local markets. Most bicycles being used for these activities have an external drivetrain exposed to the elements of the road including water, mud, dirt, and debris. External drivetrains are very fragile and when damaged, pedaling efficiency is greatly reduced and the overall riding experience diminishes.

One solution to this issue is a gearbox specifically designed for a bicycle frame. A gearbox has several mechanical mechanisms operating inside a protective housing. Since the housing is fully sealed, outside elements are not …

Design And Prototyping Of An Adjustable Putter, Daulton Morgan

Industrial and Manufacturing Engineering

Being able to demo a golf putter is essential for a golfer since the feel of the putter is critical in determining what suits the golfer best. Due to the market being primarily dominated by right-handed players, it is difficult for left-handed players to demo high quality putters since the selection is sparse.

This report is about designing and integrating an interchangeable fastening system that allows a putter to be altered between a right and left-handed orientation, while still maintaining the traditional look of a putter. The report covers the necessary design steps, the prototyping of the putter, the projected …

Assembly Line Kitting: Foam Mold Material Substitute, Samer Samy Saleh

Industrial and Manufacturing Engineering

Kitting is considered an incredibly innovative and effective solution intended to aid operators within a mixed model assembly line. However, it is a non-value added procedure and one that customers may not be willing to pay for. With this project, the goal is to examine opportunities to employ lean principles and provide a solution that further eliminates non-value added procedures, while also producing the potential for a flexible, mixed model assembly line.

To achieve the aforementioned purpose, the production of foam molds, located within industrial totes and sent to the assembly line, was found to be a major waste within …

The Effect Of Process Parameters And Surface Condition On Bond Strength Between Additively Manufactured Components And Polymer Substrates, Bharat Bhushan Chivukula

Graduate Theses and Dissertations

Additive patching is a process in which printers with multiple axes deposit molten material onto a pre-defined surface to form a bond. Studying the effect of surface roughness and process parameters selected for printing auxiliary part on the bond helps in improving the strength of the final component. Particularly, the influence of surface roughness, as established by adhesion theory, has not been evaluated in the framework of additive manufacturing (AM). A full factorial design of experiments with five replications was conducted on two levels and three factors, viz., layer thickness, surface roughness, and raster angle to examine the underlying effects …

The Effects Of The Stratosphere On Materials, Ashley C. Greene, Theresa M. Palandro

Posters-at-the-Capitol

Abstract 1:

Making AND Breaking: How reliable are some water pipes?

Ashley C. Greene.

Three different types of pipes were tested to see at what point in time they would break. The pipes, PVC pipe, PEX pipe, and CPVC pipe, were filled with water and attached to a helium filled weather balloon. The ends of the pipes were sealed to trap the water inside. The pipes were secured onto a payload in a Styrofoam box surrounded by cheese cloth. This frame secured the pipes and ensured that they stayed in one place and could not move around the container. The …

Fatigue Analysis Of The Welded Region In The Automotive Torsion Beam Rear Suspension System, Nan Zhan, Xiaochuan Zhang

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Development Of A Dsm-Based Model For Managing The Design Of Complex Systems Considering The Impact Of Technological Obsolescence, Gershom Kwaku Obeng

Mechanical & Aerospace Engineering Theses & Dissertations

Obsolescence has been a constant issue for process planners and designers and if not properly accounted for, obsolescence can become an expensive issue. As systems become more complex, interconnected, and nonhomogeneous, separate studies of single groups of equipment are no longer sufficient in modeling the obsolescence of the systems that they make up. The purpose of this dissertation is to model the likelihood of a process's design becoming obsolescent given the obsolescent behavior of the equipment used to complete the process. The methodology discussed in this work is based on a combination of using a systems engineering tool called the …

Environmental Efficiency Assessment Of U.S. Transport Sector: A Slack-Based Data Envelopment Analysis Approach, Yong Shin Park, Siew Hoon Lim, Gokhan Egilmez, Joseph Szmerekovsky

Mechanical and Industrial Engineering Faculty Publications

Sustainable transportation in the U.S. is essential for long-term economic growth and mobility, and environmental preservation. Using a non-radial slack-based measurement data envelopment analysis (SBM-DEA) model and state-level data, this study assesses the environmental efficiency of the transportation sector in the U.S. from years 2004 to 2012. In addition to environmental efficiency, carbon efficiency and potential carbon reduction were estimated for the 50 U.S. states. The findings of this study reveal that U.S. transportation sector was environmentally inefficient; U.S. states had an average transportation environmental efficiency score below 0.64. Therefore the states could substantially reduce carbon emissions to improve the …

Technology Innovations And The Financial Services Industry., Olubukola Akinniyi Akinwunmi

Bullion

This article explores the future of the financial services industry in the context of new technologies. Technological innovations were reviewed and likely implications for the industry were highlighted. The article suggests that a symbiotic relationship among new and incumbent financial services providers will benefit the industry. Since technology is re-defining the financial services industry and the global financial system as undergone transformation in the last couple of decades.

Performance Prediction Of Drying Process In Residential Clothes Dryer Using Multiphysics Modeling And Simulation, Molly Shircliff

Mahurin Honors College Capstone Experience/Thesis Projects

The clothes dryer is the second highest consumer of electricity among household appliances in the U.S. However, few improvements have been made to the overall design of dryers since the 1970s. For this reason, energy efficiency research in domestic clothes dryers is a promising topic. In order to effectively and accurately research and test efficiency and design of new prototypes of the dryer, a mathematical model of the air-vented, residential dryer was created in the Energy Systems Lab at Western Kentucky University, using the text-based environment of MATLAB. This model was developed and simulated using numerical solver techniques. This model …

An Engineering Approach To Industrial Research And Development Of Pillows, Wesley Patterson

Mahurin Honors College Capstone Experience/Thesis Projects

Comfort during sleep, though taken for granted, involves a great amount of research and engineering. Few give it a second thought, but nearly one-third of a person’s life is spent with their head on a pillow, thus making them a point for increased quality. Having been approached by a tier-1 bedding manufacturer, a team of both mechanical and electrical engineers was been tasked with the goal of creating a valid research tool that the customer, Tempur-Sealy, will utilize in the company’s research and development of high-end pillows. The team sought to tackle this project utilizing tools and knowledge gained throughout …

A Fuzzy Data Envelopment Analysis Framework For Dealing With Uncertainty Impacts Of Input–Output Life Cycle Assessment Models On Eco-Efficiency Assessment, Gokhan Egilmez, Serkan Gumus, Murat Kucukvar, Omer Tatari

Mechanical and Industrial Engineering Faculty Publications

The uncertainty in the results of input–output-based life cycle assessment models makes the sustainability performance assessment and ranking a challenging task. Therefore, introducing a new approach, fuzzy data envelopment analysis, is critical; since such a method could make it possible to integrate the uncertainty in the results of the life cycle assessment models into the decision-making for sustainability benchmarking and ranking. In this paper, a fuzzy data envelopment analysis model was coupled with an input–output-based life cycle assessment approach to perform the sustainability performance assessment of the 33 food manufacturing sectors in the United States. Seven environmental impact categories were …

Mechanisms And Solutions To The Brittle Solder Joint In Electroless Ni Plating, Xuan Wang, C. Key Chung

Industrial and Manufacturing Engineering

Brittle solder joints in Electroless Ni electroless Pd immersion Au (ENEPIG) surface finishes are one of the key reliability issues in electronics assembly. Previous characterization of the reflow process has indicated that interfacial voids formed after solder reflow are responsible for the decreases in solder joint strength. However, the mechanisms behind the formation of these voids in the ENEPIG process remain unclear. In this paper, the interaction between various aspects of the ENEPIG process and solder joint strength were investigated. Surface roughness, morphology, and nano-pitting at the interface between electroless Pd and Ni-P were characterized. The size and density of …

A Benders Based Rolling Horizon Algorithm For A Dynamic Facility Location Problem, Mohammad Marufuzzaman, Ridvan Gedik, Mohammad S. Roni

Mechanical and Industrial Engineering Faculty Publications

This study presents a well-known capacitated dynamic facility location problem (DFLP) that satisfies the customer demand at a minimum cost by determining the time period for opening, closing, or retaining an existing facility in a given location. To solve this challenging NP-hard problem, this paper develops a unique hybrid solution algorithm that combines a rolling horizon algorithm with an accelerated Benders decomposition algorithm. Extensive computational experiments are performed on benchmark test instances to evaluate the hybrid algorithm’s efficiency and robustness in solving the DFLP problem. Computational results indicate that the hybrid Benders based rolling horizon algorithm consistently offers high quality …

Design For Manufacturability: Off-Road Toyota Bumper, Drew Donlon

Industrial and Manufacturing Engineering

The purpose of this project is to design a new off-road bumper that is improved from the stock form of a 1996-2002 Toyota 4Runner and a 1996-2004 Toyota Tacoma. The current state of the component is too weak to endure to off-road endeavors, and a kit bumper market is virtually untapped for these vehicles. The objectives of this project were met by redesigning the stock front bumper, conducting a finite element analysis on the model to test for strength, prototyping the bumper with CNC cut cardboard, and conducting a full cost analysis including the costs for waterjet and laser cutting …

Integrating E-Learning Modules Into Engineering Courses To Develop An Entrepreneurial Mindset In Students, Nadiye O. Erdil, Ronald S. Harichandran, Jean Nocito-Gobel, Maria-Isabel Carnasciali, Cheryl Q. Li

Engineering and Applied Science Education Faculty Publications

Engineering graduates who will be leaders in today’s rapidly changing environment must possess an entrepreneurial mindset and a variety of professional skills in addition to technical knowledge and skills. An entrepreneurial mindset applies to all aspects of life, beginning with curiosity about our changing world, integrating information from various resources to gain insight, and identifying unexpected opportunities to create value. The Kern Entrepreneurial Engineering Network (KEEN) defines curiosity, connections and creating value as three core components of an entrepreneurial mindset. These 3Cs coupled with associated engineering skills forms KEEN’s entrepreneurial mindset framework. An entrepreneurial mindset enables engineers to develop sound …

Preliminary Assessment Of And Lessons Learned In Pitch: An Integrated Approach To Developing Technical Communication Skills In Engineers, Nadiye O. Erdil, Ronald S. Harichandran, Michael A. Collura, Jean Nocito-Gobel, David J. Adams, Amanda Simson

Mechanical and Industrial Engineering Faculty Publications

The Project to Integrate Technical Communication Habits (PITCH) has been implemented across seven engineering and computer science undergraduate programs starting in fall 2012. The overarching goal of PITCH is to develop written, oral and visual communication skills and professional habits in engineering students. PITCH activities begin in the very first semester and are reinforced and extended through all four years of each program. After three years of progressively more extensive development and deployment, a preliminary assessment of student writing over their first three years in programs was performed. In May 2016 the first cohort of students will have completed the …

Socio-Eco-Efficiency Analysis Of Highways: A Data Envelopment Analysis, Omer Tatari, Gokhan Egilmez, Dhruva Kurmapu

Mechanical and Industrial Engineering Faculty Publications

To ensure the large network of highways is performing sustainably, there is a dire need to quantify sustainability for highways. In this paper, data envelopment analysis (DEA) based mathematical model is developed to evaluate sustainability in an attempt to aid these efforts. Sustainability goals pertaining to the three dimensions of sustainability, social, economic and environmental, were utilized. Utilizing the developed model, sustainability scores of thirty highway sections were calculated and ranked accordingly. Percent improvement analysis was carried out to gain more insight. In addition, sensitivity analysis was carried out to understand how different values of input parameters impacted the socio-eco-efficiency …

Solar Turbines Compressor Blade Installation Tools, Ryan Bruce, Carolyn Honeycutt, Stephen Oltrogge, Emmett Ross

Mechanical Engineering

The following report documents a California Polytechnic State University, Mechanical Engineering Senior Project sponsored by the gas turbine manufacturer, Solar Turbines. The senior project team consisted of four senior mechanical engineering students at Cal Poly, all with general concentrations; Ryan Bruce, Carolyn Honeycutt, Steve Oltrogge, and Emmett Ross. Kenneth Thomas sponsored the group and serves as the point of contact between the senior project team and Solar Turbines. He is a member of the Solar Turbines Mechanical Design Engineering Team and a Cal Poly graduate. Christoph Maurer served as the project team’s on-campus advisor.

A gas turbine uses internal combustion …

Design & Analysis Of A Bicycle Towing Device, Austin Lynch, William Max Mcewan, Fredrik Stenson

Industrial and Manufacturing Engineering

A local businessman had the idea to build a device that allows a bicycle to tow another bicycle. He built a prototype to demonstrate his idea but he wanted help in developing a product that could fit more bikes, did not require a rear rack to operate, and be manufacturable at his facility. He also expressed interest in an economic evaluation of production and marketing of the device. An analysis of customer needs led to adding reduction of weight and ease of attachment to the design requirements.

This report is about improving the original design and presents the process of …

Mentoring Management Database, Alexandra Cava, Samantha Kin

Industrial and Manufacturing Engineering

A new mentoring program is set to begin next year pairing children from Kindergarten through 12th grade with college students as their mentors. Keeping track of the mentor information, mentee information, pairings, stipend disbursements, interview question results, events, and final assessments by hand would be extremely difficult, therefore, a database would be a great asset to the program.

Creating a database in Microsoft Access allows a user to have all this information in one convenient location, therefore, ensuring there is a good user interface is a key component to this project. Using Perach’s "Guide to the Perplexed" as the base …

Zero Waste Campus Dining, Jenny Caudillo, Sarah Dahel, Youlen Ghazalian

Industrial and Manufacturing Engineering

Cal Poly Campus Dining has a goal of becoming a zero waste entity by providing their customers with alternative methods of disposing their trash. Their current operations produce waste, specifically their methods of packaging the food. Campus dining plans to be more sustainable by providing their customers with reusable containers. The objective of this implementation is to reduce waste produced from one-time use, disposable food containers. The success criteria for the desired system is based around the ability to track and measure the reusable containers to prevent further waste, while providing the user an accommodating environment to ensure they will …

Building A Startup Wine Brand, Sean Christopher Silvestre

Industrial and Manufacturing Engineering

Lisso Wine is a company that currently purchases wine from a California winemaker and resells it in China. In order to reach more customers and increase sales, Lisso wants to create their own brand of wine while keeping the winemaker as a supplier. However, they do not have a plan for the marketing, production, or distribution of their new product. This project will be treated as a startup venture by Lisso Wine and designed to be operated by a handful of people with limited resources. Sustainable and cost-effective materials were selected for the product and it’s packaging in order to …

Ymca Operations Manual Development, Devlin Stewart

Industrial and Manufacturing Engineering

The San Luis Obispo YMCA sports department was losing money and overworking their employees due to lack of processes and organizational issues. To address this, a plan was made with the sports director to begin organizing the sports department. This would be done by creating an operations manual for them to organize and consolidate all of their relevant information.

The project was scoped to develop a plan for the YMCA to implement an operations manual. By delivering a work breakdown structure, a gantt chart, and a plan for continuous improvement, the YMCA could use these tools to develop their operations …

Soto's True Earth Market Optimization, Hironari Fujita, Wei Lin Luong, Sean Macwilliams

Industrial and Manufacturing Engineering

Soto’s True Earth Market is a new organic market startup which is located in a historical facility in the small town of Cambria. The new owner of Soto’s Andre Ponce has a vision to create a community revolved around local organic foods and sustainability. Since Soto’s is still in the initial startup phase there is a large amount of room for optimization and redesign in order to create a solid customer foundation. Andre presented several opportunities for improvement to the team. With a time constraint of solely two quarters the project team decided to provide the following:

● Old and …