Operations Research, Systems Engineering and Industrial Engineering Commons^™

A Multi-Criteria Gis-Based Route Selection Tool For Hazardous Material Transport: Consideration Of Environmental Consequence, Traffic Congestions And Costs, Bahareh Inanloo

FIU Electronic Theses and Dissertations

Hazardous materials are substances that, if not regulated, can pose a threat to human populations and their environmental health, safety or property when transported in commerce. About 1.5 million tons of hazardous material shipments are transported by truck in the US annually, with a steady increase of approximately 5% per year.

The objective of this study was to develop a routing tool for hazardous material transport in order to facilitate reduced environmental impacts and less transportation difficulties, yet would also find paths that were still compelling for the shipping carriers as a matter of trucking cost. The study started with …

Value Focused Inland Waterway Infrastructure Investment Decisions, Othman Boudhoum

Graduate Theses and Dissertations

Maritime transportation functions as the backbone of world trade. The U.S. inland waterway transportation system is comprised of 12,000 miles of navigable waterways that connect and move freight between the global supply chain and thirty eight States. When investing in inland waterway infrastructure, we should aim to maximize all benefits associated with the investment including flood protection, water supply, hydropower generation, recreation, and environmental impact benefits. We formulate an initial qualitative value model for the inland waterway infrastructure investment decision based on a value-focused thinking approach which allows us to holistically evaluate project investment alternatives. Given limited resources, a portfolio …

Problem Tree & Italian Transport Companies, Sajjad Khaksari

SAJJAD KHAKSARI

Slides of Report: Production System Analysis & Italian Transport Companies; A briefly endeavor to modeling, 3th edition; Problem Tree; Production Functions (PF's); Organization Chart; Information Pattern; Standard Time; Make-span (MS); Modeling; DM's; Work Sequence; Report; Table of Agents; Table of Resources; Production System Analysis & Italian Transport CompaniesCourse of Prof. Agostino Villa; Politecnico di Torino, Student: Sajjad Khaksari; June 11, 2015;

Lessons Learned From A Simulation Project In Construction Education, Saeed Rokooei, James D. Goedert

Department of Construction Engineering and Management: Faculty Publications

Virtual Interactive Construction Education (VICE) is a simulation designed for construction education. The purpose was to provide the traditional lecture-based construction contents along with supplementary instructions in a project-based learning environment. Six modules were proposed as a curriculum delivery guideline including: single span bridge, residential building, light commercial, heavy commercial, highway, and segmental bridge. The single span bridge was the first module used for prototype development providing an opportunity to design, analyze, implement, and test for effectiveness. This paper describes the design steps and results of this three-year research project. VICE-Bridge required participants to sequentially order the construction activities and …

Applying Fram To Enhance Formal Safety Assessment In The Maritime Domain, Gesa Praetorius

Gesa Praetorius

Presentation given at the Functional Resonance Analysis Method (FRAM) workshop in Olten, Switzerland, 12 June 2015.

Global Sensitivity Analysis Applied To Model Inversion Problems: A Contribution To Rail Condition Monitoring, René Schenkendorf, Jörn Groos

René Schenkendorf

Rising demands on railroad infrastructure operator by means of profitability and punctuality call for advanced concepts of Prognostics and Health Management. Condition based preventive maintenance aims at strengthening the rail mode of transport through an optimized scheduling of maintenance actions based on the actual and prognosticated infrastructure condition, respectively. When applying model-based algorithms within the framework of Prognostics and Health Management unknown model parameters have to be identified first. Which of these parameters should be known as precisely as possible can be figured out systematically by a sensitivity analysis. A comprehensive global sensitivity analysis, however, might be prohibitive by means …

Algorithms For Bundling And Pricing Trucking Services: Deterministic And Stochastic Approaches, Rodrigo Mesa-Arango

Open Access Dissertations

Bundling and pricing trucking services is an important strategic decision for carriers. This is helpful when they consider the incorporation of new businesses to their networks, look for economic and optimal operations, and develop revenue management strategies. Reverse combinatorial auctions for trucking services are real-world examples that illustrate the necessity of such strategies. In these auctions, a shipper asks carriers for quotes to serve combinations of lanes and the carriers have to bundle demand and price it properly. This dissertation explores several dimensions of the problem employing state-of-the-art analytical tools. These dimensions include: Truckload (TL) and less-than-truckload (LTL) operations, behavioral …

Resilience Of Transportation Infrastructure Systems To Climatic Extreme Events, Alexandra C. Testa

Masters Theses

A topology-based approach has been used to measure the resilience of a highway network to climatic events. Civil infrastructure systems are inarguably critical to the everyday functions of society. Because such systems are regionally distributed, their components undergo a wide range of hazard intensities, often dependent on their relative locations. The ability of an infrastructure system to withstand, adapt to, and rapidly recover from extreme events is paramount to its ability to continuously serve users. The topological properties of a network can provide a good means to assess the resilience of the system which is adequate to comprehend the preparedness …

Timetable Management Technique In Railway Capacity Analysis: Development Of The Hybrid Optimization Of Train Schedules (Hots) Model, Hamed Pouryousef

Dissertations, Master's Theses and Master's Reports - Open

There are two general approaches to improve the capacity in a rail corridor, either by applying new capital infrastructure investment or by improving the operation of the rail services. Techniques to evaluate the railway operation include modeling and optimization through the use of commercial timetable management and rail simulation tools. However, only a few of the existing tools include complete features of timetable management techniques (e.g. timetable compression) are equipped with an optimization model for rescheduling and timetable improvement and this is especially true when it comes to the U.S. rail environment that prevalently uses unstructured operation practices.

This dissertation …

Eight Principles Of Uncertainty For Life Cycle Assessment Of Biofuel Systems, Adam J. Liska

Adam Liska Papers

New environmental regulations in the USA and Europe require a reduction of greenhouse gas (GHG) emissions from transportation fuels as a component of climate change mitigation policy. The US Energy Independence and Security Act of 2007 (EISA) requires GHG emission reductions from the life cycles of biofuels compared to gasoline, by 20% for ethanol from maize grain (maize-ethanol), 60% for cellulosic ethanol, and 50% for other advanced biofuels. To determine these reductions, the US Environmental Protection Agency (EPA) employs life cycle assessment (LCA) methods which were not used previously in national environmental regulations. These regulations, entitled the “Renewable Fuel Standard …

Inżynieria Chemiczna Ćw., Wojciech M. Budzianowski

Wojciech Budzianowski

-

Tematyka Prac Doktorskich, Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.

Making The Case For Crew-Centered Design (Ccd) In Merchant Shipping, Aditi Kataria, Gesa Praetorius, Jens-Uwe Schröder-Hinrichs, Michael Baldauf

Conference Papers

Since 2003, the International Maritime Organization (IMO) has emphasised the need to address and integrate ergonomics knowledge in a concerted manner. However, there is little guidance on the application of this knowledge in the design of merchant vessels. Utilizing a mixed methods approach, the paper identifies the need for crew-centered design (CCD), highlighting the importance of using concepts derived from Human-Centred Design (HCD) to be able to design work spaces and operational procedures that facilitate the work of the crew on board. Drawing upon results obtained from accident analysis (utilising the Technique for the Retrospective and predictive Analysis of Cognitive …

Planning Rural Water Services In Nicaragua: A Systems-Based Analysis Of Impact Factors Using Graphical Modeling, Jeffrey P. Walters, Paul S. Chinowsky

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

The success or failure of rural water services in the developing world is a result of numerous factors that interact in a complex set of connections that are difficult to separate and identify. This research effort presented a novel means to empirically reveal the systemic interactions of factors that influence rural water service sustainability in the municipalities of Darío and Terrabona, Nicaragua. To accomplish this, the study employed graphical modeling to build and analyze factor networks. Influential factors were first identified by qualitatively and quantitatively analyzing transcribed interviews from community water committee members. Factor influences were then inferred by graphical …

Long-Term Functionality Of Rural Water Services In Developing Countries: A System Dynamics Approach To Understanding The Dynamic Interaction Of Causal Factors, Jeffrey P. Walters, Amy N. Javernick-Will

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Research has shown that sustainability of rural water infrastructure in developing countries is largely affected by the dynamic and systemic interactions of technical, social, financial, institutional, and environmental factors that can lead to premature water system failure. This research employs systems dynamic modeling, which uses feedback mechanisms to understand how these factors interact dynamically to influence long-term rural water system functionality. To do this, the research first identified and aggregated key factors from literature, then asked water sector experts to indicate the polarity and strength between factors through Delphi and cross impact survey questionnaires, and finally used system dynamics modeling …

Management Of Rural Water Services In Nicaragua: A Systematic Network Approach To Evaluating Stakeholder Alignment, Jeffrey P. Walters, Amy N. Javemick-Will

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Water sector literature attributes a substantial cause of rural water system failure in developing countries to poor alignment between water service stakeholders. This study aimed to investigate a means for assessing stakeholder alignment by comparing the systemic interaction of stakeholder values, where the term ‘stakeholder values’ refers to aspects stakeholders believe are necessary to ensure rural water services are sustainable. The research held focus groups with key stakeholder groups involved in the management of rural water infrastructure in Terrabona, Nicaragua, to identify stakeholder values, and then used cross-impact analysis to evaluate how these values interacted to form stakeholder value networks …

Color Removal From Pulp Mill Effluent Using Coal Ash Produced From Georgia Power Coal Combustion Plants, Christopher B. Willett

Electronic Theses and Dissertations

Two environmental concerns currently face Georgia: coal fly ash (CFA) waste from coal power plants, and the effluent generated by pulp mills. Pulp mill effluent discolors surface waters into which it is discharged, and has been proven to negatively impact the dissolved oxygen and carbon necessary for aquatic life. The proposed solution is a cost-effective adsorption treatment using an inexpensive but abundantly available waste material: CFA. CFA possesses beneficial properties that allow it to effectively remove contaminants, and is available at significantly reduced cost. The primary research objective was to define treatment parameters that would result in the maximum removal …

The Engagement Of Expert Opinions In The Modeling Of Multi-Attribute Decision Making For The Selection Of Project Delivery Methods In Building Construction, Issam H. Algraiw

Doctoral Dissertations

"Choosing the most appropriate project delivery method (PDM) available is acknowledged as a crucial issue in the construction industry. Both the choice and application of an unsuitable PDM can result in project failure. Likewise, the selection of a suitable PDM can increase the chance for project success. A method of selecting from among the seven PDMs recognized by the Construction Specifications Institute (CSI) was created in an attempt to address this issue.

This research was comprised of three objectives. The first objective was to determine the influential factors needed to select the appropriate PDMs available to the US construction industry. …

Wind Farm Optimization Using Evolutionary Algorithms, Carlos Marco Ituarte-Villarreal

Open Access Theses & Dissertations

In recent years, the wind power industry has focused its efforts on solving the Wind Farm Layout Optimization (WFLO) problem. Wind resource assessment is a pivotal step in optimizing the wind-farm design and siting and, in determining whether a project is economically feasible or not. In the present work, three (3) different optimization methods are proposed for the solution of the WFLO: (i) A modified Viral System Algorithm applied to the optimization of the proper location of the components in a wind-farm to maximize the energy output given a stated wind environment of the site. The optimization problem is formulated …

Influence Of Spatial Variations Of Railroad Track Stiffness And Material Inclusions On Fatigue Life, Celestin Nkundineza

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Railroad transportation is very important for economic growth and effective maintenance is one critical factor for its economic sustainability. The high repetitive forces from a moving railcar induce cyclic stresses that lead to rail bending and potential deterioration due to fatigue crack initiation and propagation. Previous research for prediction of fatigue life has been done under the assumptions of a uniform track bed and a homogeneous rail. However the spatial variation of the track stiffness is expected to increase the maximum stresses in the rail and, therefore, accelerate the fatigue process. The research described in this dissertation is focused on …

Cyclades – Användarcentrerad Design Av Fartyg, Teknik Och Procedurer, Gesa Praetorius

Gesa Praetorius

Presentation given at the Swedish Work Environment Council annual meeting (SAN-konferens), 22 October 2015, Gothenburg, Sweden.

Zespół Energii Odnawialnej I Zrównoważonego Rozwoju (Eozr), Wojciech M. Budzianowski

Wojciech Budzianowski

No abstract provided.