Operations Research, Systems Engineering and Industrial Engineering Commons^™

Review Of Package Warning Labels And Their Effect On Consumer Behaviour With Insights To Future Anticounterfeit Strategy Of Label And Communication Systems, John Spink, Jay Singh, S. Paul Singh

Industrial Technology and Packaging

This paper investigates and reviews literature regarding a range of topics important to the research question – the themes apply across all the topics. The topics include label and package warnings, including tamperevident features, to review their effect on the consumer behaviour of changing usage or purchase decisions. This information was then applied to gain insight into anticounterfeit product/package efforts. Based on this research, it appears that there is value for brand marketers to enhance their anticounterfeit efforts and consumer confidence by utilizing warning labels and information labels on their labels or packages. Currently, consumer perception of a domestic counterfeit …

Effect Of Processing, Packaging And Vibration Treatment On The Sensory Quality Of Fresh-Cut Apple Slices, M. Siddiq, J. B. Harte, S. P. Singh, A. A. Khan, K. D. Dolan, Koushik Saha

Industrial Technology and Packaging

Fresh-cut fruit industry has seen tremendous growth in recent years. The present study was designed with the objective of studying the sensory quality of fresh-cut apple slices that were treated with different antibrowning agents, packed in three types of packaging materials and subjected to vibration treatment to simulate commercial transportation. The slices were treated with two commercial antibrowning agents [NatureSeal (Mantrose-Haeuser Co., Inc., Westport, CT, USA) and Ever-Fresh (Kraft Foods, Inc., Rye Brook, NY, USA)] at 5% (w/v) application rate. The treated slices were packaged in 5 oz polystyrene rigid container, 2 lb polyethylene bag or 2 oz polyethylene bag. …

Effect Of Horizontal Offset On Vertical Compression Strength Of Stacked Corrugated Fiberboard Boxes, Jay Singh, S. Paul Singh, Koushik Saha

Industrial Technology and Packaging

The purpose of this study was to evaluate the effect of horizontal offset on the compression strength of stacked box configurations. Four different boxes of varying sizes and similar board combinations, made from similar flute but different manufacturers were studied. The single box compression strength for each type of box was determined to represent as the control for this study. The compression strength of control boxes were compared to overall strength of a three-high stack and in three different offset configurations. In addition a set of perfectly aligned boxes were compared to overall strength of a three-high stack and in …

Effect Of Palletized Box Offset On Compression Strength Of Unitized And Stacked Empty Corrugated Fiberboard Boxes, S. Paul Singh, Jay Singh, Koushik Saha

Industrial Technology and Packaging

The purpose of this study was to evaluate the effect of pallet type, tie-sheet and stack configuration on compression strength of a palletized load of boxes. Four boxes made from similar board grade and different dimensions were selected for this study. The column stack configuration which represented the control was compared with the 3 stack configurations either on a CHEP® or GMA pallet. The unitized load either had a tie-sheet in between layers or no tie-sheet between layers of boxes on the respective pallets, for compression strength comparison with the control unitized load represented by a column stack configuration. This …

A System Model For Green Manufacturing, Ahmed M. Deif

Industrial Technology and Packaging

Manufacturing systems evolution is afunction in multiple external and internal factors. With today’s global awareness of environmental risks as well as the pressing needs to compete through efficiency, manufacturing systems are evolving into a new paradigm. This paper presents a system model for the new green manufacturing paradigm. The model captures various planning activities to migrate from a less green into a greener and more eco-efficient manufacturing. The various planning stages are accompanied by the required control metrics as well as various green tools in an open mixed architecture. The system model is demonstrated by an industrial case study. The …

Evaluation Of An Innovative System For Improving Readability Of Passive Uhf Rfid Tags Attached To Reusable Plastic Containers, Jay A. Singh, S. Roy, B. Roesner

Industrial Technology and Packaging

Radio frequency identification (RFID) is a contactless identification technology that has proven to work well in conjunction with reusable plastic containers (RPCs). The impact of this technology on returnable containers has been explored by several past studies. This study evaluates an innovative system for improving readability of passive UHF RFID tags in conjunction with RPCs. The system involves an energy transfer device (ETD), which when attached to the RPCs, passively transfers radio frequency signals to interior regions of a unitized load thereby improving the readability of all RFID tags attached to the RPCs. This study included an evaluation of the …

Partial Budgeting Analysis Of Conventional Pump Over Versus Pulsair Cap Management System For A Large–Scale California Winery, Zachary Thomas Hicks

Agribusiness

The purpose of this project was to evaluate the financial feasibility of implementing an automated gas injection system from Pulsair as an alternative to the traditional pump over cap mixing technique that is used during the alcoholic fermentation stage of winemaking.

There were various costs involved in this project that were determined and explained through the use of the partial budgeting method. The costs that were thoroughly analyzed included equipment, labor, utility, and initial investment costs for the Pulsair system as well as the related pump over operation costs. After the two methods associated numbers were evaluated, they were then …

The Fresh Express Lean Changeover Project, Mario Borbas

Industrial Technology and Packaging

In the current economic turmoil, industry leaders across the globe are resorting to means of increasing efficiency without having a large initial investment. Lean manufacturing principles have been adopted by companies because of its ability to increase throughput, lower overhead, reduce waste, and increase the overall quality of products. The value of lean manufacturing solutions has been increasing in the past decade and continues to increase into 2011.

This project is centered on a current situation regarding a changeover process that has recently been made more efficient. The goal is to create new ways to make this same process even …

Material Weight Station Optimization Senior Project, Douglas Peters, Michael Eng

Industrial Technology and Packaging

The main principle of all industry is that “time is money”. This senior project focuses on reducing operation times for Specialty Silicone Fabricators (SSFab) materials weighing station. Currently SSFab is set up so that multiple operators check the weights of materials. This is done to guarantee the accuracy of the readings and maintain tight quality control. This project will focus on eliminating the need of multiple weight checkers as a way to save time and ultimately save money.

Through detailed research and studies it has been determined that the most appropriate solution to this problem is a weight checking software …

Gauge Repeatability And Reproducibility Study For A Bulge Test Fixture For Corrugated Boxes, Anthony J. Hall

Industrial Technology and Packaging

This senior project evaluates the measurement variation within a corrugated container bulge tester by utilizing a gauge repeatability and reproducibility study. Bulge is a type of deformation containers experience when subject to compressive forces such as stacking or internal forces due to under- and over-packaging. Both compressive and internal forces can accelerate the failure of a container by causing panels to flex and flutes to buckle, compromising structural integrity. Additionally, variable environmental conditions such as temperature and humidity can magnify the effect bulge has on a container, speeding up the failure rate of a container.

An Exploratory Model For Predicting Post-Consumer Recycled Pet Content In Pet Sheets, Dong Ho Kang, Rafael Auras, Keith Vorst, Jay Singh

Industrial Technology and Packaging

An exploratory model for determining post-consumer recycled polyethylene terephthalate (PET) content in PET sheets for one specific stream of mechanically recycled PET (RPET) was developed. Six kinds of PET sheets with varying percent of virgin (V) and recycled (R) PET contents (i.e., 100V, 80V20R, 60V40R, 40V60R, 20V80R, and 100R PET) were commercially extruded. The optical, thermal, physicomechanical and barrier properties of the PET sheets were evaluated as function of RPET content. Differences were found between the sheets for UV and visible light absorption in the regions 200–350 nm and 670–700 nm, respectively. Intrinsic viscosities of 100V and 100R PET sheets …

Life Cycle Inventory Of Hdpe Bottle-Based Liquid Milk Packaging Systems, Jay Singh, Aric Krasowski, S. Paul Singh

Industrial Technology and Packaging

This study aims at providing a relatively straightforward methodology to serve as a decision-making tool when more than one packaging solution could be available to a user. It involves a life cycle inventory (LCI) analysis and comparison of three currently available 3.79 l (1 gallon) packaging systems for liquid milk. Two of the primary container types studied use reusable plastic crates (RPCs) for stacking and shipping,
while the third type is a heavier duty container that does not require secondary shipping containers. The three primary containers studied are identified as original, cube and stackable throughout this paper. The study shows …

A Multiple Performance Analysis Of Market-Capacity Integration Policies, Ahmed M. Deif, Hoda A. Elmaraghy

Industrial Technology and Packaging

A model that uses simulation augmented with Design of Experiments (DOE) is presented to analyse the performance of a Make-to-Order (MTO) reconfigurable manufacturing system with scalable capacity. Unlike the classical capacity scaling policies, the proposed hybrid capacity scaling policy is determined using multiple performance measures that reflect cost, internal stability and responsiveness. The impact of both tactical capacity and marketing policies and their interaction on the overall performance was analysed using DOE techniques and real case data. In addition to the different insights about the trade-offs involved in capacity planning decisions, the presented results challenged the conventional capacity planning wisdoms …