Operations Research, Systems Engineering and Industrial Engineering Commons^™

A Review Of Baobab (Adansonia Digitata) Products: Effect Of Processing Techniques, Medicinal Properties And Uses, Donatien Kabore, Hagrétou Sawadogo-Lingani, Bréhima Diawara, Clarise Compaoré, Mamoudou H. Dicko Prof., Mogens Jacobsen

Pr. Mamoudou H. DICKO, PhD

A general literature review including the effect of processing techniques, medicinal value and uses of baobab tree is reported in this manuscript. Baobab tree has multi-purpose uses, as it produces food and non-food products such as medicines, fuel, timber, fodder. Every part of the baobab tree is reported to be useful. The seeds, leaves, roots, flowers, fruit pulp and bark of baobab are edible. Baobab leaves are used in the preparation of soup. Seeds are used as a thickening agent in soups, but they can be fermented and used as a flavouring agent or roasted and eaten as snacks. The …

Engineering Of A Knowledge Management System For Relational Medical Diagnosis, Maria Carolina Herrera-Hernandez

USF Tampa Graduate Theses and Dissertations

The increasingly high costs of health care in the U.S. have led the general public to search for different medical approaches. Since the 1990's, the use of Complementary and Alternative Medicine (CAM) has radically increased in the U.S. due to its approach to treat physical, mental, and emotional causes of illness. In 2009, the National Health Statistics reported the impact of CAM in the U.S. health care economy, with population expenditures of $14.8 billion out-of-pocket on natural Medicine and $12.4 billion out-of-pocket on visits to CAM providers as a complement to Western Medicine care.

CAM interconnects human functions to reach …

Reliability Analysis Of Nanocrystal Embedded High-K Nonvolatile Memories, Chia-Han Yang

Doctoral Dissertations

The evolution of the MOSFET technology has been driven by the aggressive shrinkage of the device size to improve the device performance and to increase the circuit density. Currently, many research demonstrated that the continuous polycrystalline silicon film in the floating-gate dielectric could be replaced with nanocrystal (nc) embedded high-k thin film to minimize the charge loss due to the defective thin tunnel dielectric layer.

This research deals with both the statistical aspect of reliability and electrical aspect of reliability characterization as well. In this study, the Zr-doped HfO₂ (ZrHfO) high-k MOS capacitors, which separately contain the nanocrystalline zinc …

City Of Industry: An Historical Precedent And Its Concrete Effects, Christina A. Hernandez

Liberal Arts and Engineering Studies

No abstract provided.

Simulation-Based Optimisation Model For The Lean Assessment In Sme: A Case Study, Amr Arisha, Amr Mahfouz, John Shea

Conference papers

Due to their space limitation and small production scale, small and medium enterprises (SME) are vulner-able to rapid changes. Lean principles are considered as effective improvement approach to eliminate sys-tem’s waste and inefficiencies. Although much of the academic materials have addressed the lean practic-es into large, global companies, they can still be adjusted to SMEs. Risks are usually associated with lean implementation process due to the drastic required changes in business policies and operations. Simulation can be successfully used to predict the impact of the proposed changes ahead of the implementation which helps to mitigate risks. Integrating simulation with optimization …

Prognostics-Based Two-Operator Competition For Maintenance And Service Part Logistics, Faranak Fathi Aghdam

Masters Theses

Prognostics and timely maintenance of components are critical to the continuing operation of a system. By implementing prognostics, it is possible for the operator to maintain the system in the right place at the right time. However, the complexity in the real world makes near-zero downtime difficult to achieve partly because of a possible shortage of required service parts. This is realistic and quite important in maintenance practice. To coordinate with a prognostics-based maintenance schedule, the operator must decide when to order service parts and how to compete with other operators who also need the same parts. This research addresses …

Inventory Models For Intermittent Highly Variable Demand And Policy Parameter Adjustments To Meet Desired Service Level Requirements, Yasin Unlu

Graduate Theses and Dissertations

This dissertation consists of three assays. The first assay examines the robustness of lead time demand models for the continuous review (r;Q) inventory policy. A number of classic distributions as well as distribution selection rules are examined under a wide variety of demand conditions. First, the models are compared to each other by assuming a known demand process and evaluating the errors associated with using a different model. Then, the models are examined using a large sample of simulated demand conditions. Approximation results of inventory performance measures - ready, rate excepted number of backorders and on-hand inventory levels are reported. …

Ethnic Difference In Healthcare Delivery, Benny Mathew Varghese

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Quality in healthcare is a very important aspect; this is obtained when there is proper care provided to the patients without any discrimination. The healthcare system in the US can be improved in the fields of patient’s care, the amount of money spent and proper advice, if proper responsibilities are taken. Quality has been improving over the years, but the median by which there is an increase is too small. The other main factor is access to the healthcare system, which has over the year, has not progressed. Studies in healthcare quality should be conducted on a regular base, so …

Economic Analysis Of Continuous Monitoring Of Commercial Truck Tire Pressure Using Tire Pressure Monitoring Systems (Tpms) And Rfid Technologies., Afolabi A. Ogunwemimo

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

The trucking industry is a major contributor to the US economy. By providing the essential services of transportation and distribution needed in today’s dynamic industry, the transportation industry has evolved into an integral player in various supply chains. The trucking industry is the largest transportation provider for other industries and employs 10.1 million workers in the United States (ATA, 2003).

This research is an analysis of the economic impact of maintaining proper air pressure in the tires of commercial trucks. Various studies have been carried out on understanding the relationship between tire pressure and fuel consumption (National Research Council, 2006). …

Optimal Charging Scheduling For Battery Electric Vehicles Under Smart Grid., Nur Dayana Abd Rahman

Electronic Theses and Dissertations

A projected high penetration of battery electric vehicles (BEV s) in the market will introduce an additional load in the electricity grid. Furthermore, uncontrolled BEV charging from residential users will exacerbate the existing peak load during evening hours. In this thesis, we propose two optimization models to alleviate the impact of extra demand from electric vehicles on the power grid. The first is a centralized charging scheduling model that coordinates the charging among BEV users under the goal of minimizing the total electricity cost for all users. The second model uses a decentralized agent-based approach to scheduling the BEV charging. …

City Of Industry: Los Efectos Concretos En El Condado De Los Angeles En La Economía, El Medio Ambiente Y La Salud Pública, Christina Andrea Hernandez

World Languages and Cultures

This project attempts to document the development of the City of Industry, located in eastern Los Angeles County, and to examine the environmental as well as socio-economic effects this industrial hub maintains on its surrounding neighborhoods. City of Industry, since its incorporation in 1957, has established an alarming precedent as a privatized city that has informed concrete changes in the local economy, the environment, and the public health of the surrounding communities that are predominantly Latina(o).

The research undertaken for this project represents an interdisciplinary intersection of a special topic in the study of Industrial Engineering: the global logistics industry, …

Adaptive Intensity Modulated Radiation Therapy Planning Optimization With Changing Tumor Geometry And Biology Enforcing Both Cumulative And Fraction Size Dose Constraints, Behlul Saka

Graduate Theses and Dissertations

Intensity Modulated Radiation Therapy (IMRT) is a modern technique of delivering radiation treatments to cancer patients. In IMRT technology, intensities must be chosen for the many small unit grids into which the beams are divided to produce a desired distribution of dose at points throughout the body with the goal of maximizing dose delivered to the tumor while sparing healthy tissues from excessive radiation and keeping dose homogeneous across the tumor. Although IMRT plans are optimized as a single overall treatment plan, they are delivered over 30-50 treatment sessions (fractions) and both cumulative and per-fraction dose constraints apply. The extended …

Integrated Planning For Rural Rail Transportation, Jeffrey Cohan Gwaltney

Graduate Theses and Dissertations

Population growth in rural areas has led to new interest in rail transportation. Planning a passenger rail system involves numerous difficult decisions, most representing a trade-off between customer service and cost. In this work, we attempt to integrate many of these planning decisions. We consider strategic decisions such as station location and vehicle procurement, as well as tactical issues that include vehicle scheduling. Our integrated model exploits the linear network structure that best suits many rural American communities, including Northwest Arkansas. Due to the intractability of the integrated rail planning problem, we have developed a customized heuristic approach to solve …

The Importance Of Project Management In Smes For The Development Of New Products Through E-Collaboration, Marjan Mohammadjafari, Shamsuddin Ahmed, Siti Zawiah Md Dawal, Hadi Zayandehroodi

Dr. Marjan Mohammadjafari

The research in this paper seeks ways for manufacturing companies to accomplish projects in real time with less cost. This paper describes a new model using critical success factors of implementing projects in small- and medium-sized enterprises (SMEs). The factors in the conceptual model were identified in past studies and are validated from interviews with 20 project managers in the electronics industry in Iran. Several prior researches have suggested critical success factors for reducing time and cost in the development of a new product. These factors are related to design, product, planning and procurement. However, none of these studies has …

Electronic Monitoring Of Hand Hygiene Compliance In An Inpatient Hospital Setting, Christopher M. Masek

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Proper hand hygiene is known to reduce hospital acquired infections. Currently the most widely accepted method used to measure hand hygiene compliance is through direct observation. This method often provides data that may not accurately represent true hand hygiene compliance due to such factors such as the Hawthorne Effect. Perhaps a better approach is to use counting devices to capture hand hygiene opportunities and activities. This thesis focuses on the measurement of hand hygiene activities of all individuals that either work or visit an inpatient medical ward including healthcare workers, patients and visitors at the patient’s bedside for non-isolation patients. …

Improving The Polymer Injection Manufacturing Process By Using Quality Engineering Methodology, Dotan I. Shvorin

Dr. Dotan Shvorin

Using quality engineering tools and methodologies are proven to be the back bone of a successful organization. Yet, they present challenges to engineers because in order to use them correctly the engineer needs to rely on his own analysis. From his findings, the engineer would be able to determine the location and the purpose for each unique quality tool or methodology. This paper presents a quality engineered methodology usage in the polymer injection manufacturing process in order to minimize the manufacturing process defects.

A Study Of Solder Joint Failure Criteria, Jianbiao Pan, Julie Silk

Industrial and Manufacturing Engineering

One of the challenges in an experimental study of solder joint reliability is to determine when cracks occur in a solder joint or when a solder joint fails. Cracks in a real solder joint are difficult to identify using an X-Ray system. Cross-sectioning and scanning electron microscopy (SEM) is a destructive method. A common non-destructive test method is to monitor resistance increase in a solder joint or a daisy-chain. However, no scientific research has been done in establishing the relationship between the crack area of an interconnection and the change in resistance of the interconnection. This paper proposes a method …

Effect Of Gold Content On The Reliability Of Snagcu Solder Joints, Jianbiao Pan, J. Silk, M. Powers, P. Hyland

Industrial and Manufacturing Engineering

Electroplated Ni/Au over Cu is a popular metallization for printed circuit board finish as well as for component leads, especially wire-bondable high-frequency packages, where the gold thickness requirement for wire bonding is high. The general understanding is that less than 3 wt% of Au is acceptable in SnPb solder joints. However, little is known about the effect of Au content on the reliability of SnAgCu solder joints. The purpose of this paper is to determine the acceptable level of Au in SAC305 solder joints. Three different package platforms with different Au thicknesses were assembled on boards with two different Au …

Revised Reference Curves For Bone Mineral Content And Areal Bone Mineral Density According To Age And Sex For Black And Non-Black Children: Results Of The Bone Mineral Density In Childhood Study, Babette S. Zemel, Heidi J. Kalkwarf, Vicente Gilsanz, Joan M. Lappe, Sharon Oberfield, John A. Shepherd, Margaret M. Frederick, Xangke Huang, Ming Lu, Soroosh Mahboubi, Thomas N. Hangartner, Karen K. Winer

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Context: Deficits in bone acquisition during growth may increase fracture risk. Assessment of bone health during childhood requires appropriate reference values relative to age, sex, and population ancestry to identify bone deficits.

Objective: The objective of this study was to provide revised and extended reference curves for bone mineral content (BMC) and areal bone mineral density (aBMD) in children.

Design: The Bone Mineral Density in Childhood Study was a multicenter longitudinal study with annual assessments for up to 7 yr.

Setting: The study was conducted at five clinical centers in the United States.

Participants: Two thousand fourteen healthy children (992 …

Effect Of Gold Content On The Reliability Of Snagcu Solder Joints, Jianbiao Pan, J. Silk, M. Powers, P. Hyland

Jianbiao Pan

Electroplated Ni/Au over Cu is a popular metallization for printed circuit board finish as well as for component leads, especially wire-bondable high-frequency packages, where the gold thickness requirement for wire bonding is high. The general understanding is that less than 3 wt% of Au is acceptable in SnPb solder joints. However, little is known about the effect of Au content on the reliability of SnAgCu solder joints. The purpose of this paper is to determine the acceptable level of Au in SAC305 solder joints. Three different package platforms with different Au thicknesses were assembled on boards with two different Au …

Supply Chain And Logistics Technology Investment In Small And Medium-Sized Enterprises, Edward Sweeney

Practitioner Journals

No abstract provided.

Selection Of Temperature Measuring Sensors Using The Analytic Hierarchy Process, Shadi Mohammad Al-B'Ool

Systems Science and Industrial Engineering Faculty Scholarship

This study presents an analytic hierarchy process (AHP) method to objectively select the best temperature sensor from among different alternative sensors in a certain industrial application. The underlying decision method based on AHP methodology, ranks temperature sensors with different features with a score resulting from the synthesis of relative preferences of each alternative with respect to the others at different levels considering independent evaluation criteria and sub-criteria. At each level, relative preferences of each candidate alternative with respect to the upper immediate level are calculated from pair-wise comparisons among the candidate alternative sensors with respect to a selected application. Pair-wise …

Collaboration Tools For Education - "Learn And Teach Online”, Nader Ale Ebrahim

Nader Ale Ebrahim

No abstract provided.

Reducing Selection Bias In Case-Control Studies From Rare Disease Registries, J. Alexander Cole, John S. Taylor, Thomas N. Hangartner, Neal J. Weinreb, Pramod K. Mistry, Aneal Khan

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Background: In clinical research of rare diseases, where small patient numbers and disease heterogeneity limit study design options, registries are a valuable resource for demographic and outcome information. However, in contrast to prospective, randomized clinical trials, the observational design of registries is prone to introduce selection bias and negatively impact the validity of data analyses. The objective of the study was to demonstrate the utility of case-control matching and the risk-set method in order to control bias in data from a rare disease registry. Data from the International Collaborative Gaucher Group (ICGG) Gaucher Registry were used as an example.

Methods: …

A Numerical Study Of Droplet Formation And Behavior Using Interface Tracking Methods, Sandeep Menon

Open Access Dissertations

An adaptive remeshing algorithm has been developed for multiphase flow simulations using the moving-mesh interface tracking (MMIT) technique. The edge-swapping algorithm uses the Delaunay criterion (in 2D) and a dynamic programming technique (in 3D) to maximize the quality of mesh primitives surrounding edges in the mesh, and performs local remeshing to minimize interpolation errors. Edge bisection and contraction operations are also performed to adjust the mesh resolution around important features like fluid-interfaces, driven by a local length scale estimation algorithm that is efficient and easily parallelized. Flow-field interpolation after reconnection is achieved using a conservative, second-order accurate remapping scheme that …

Impulsive Displacement Of A Liquid In A Pipe At High Reynolds Numbers, Gerald G. Kleinstein

Gerald G. Kleinstein

We consider the problem of an impulsive displacement of a liquid, originally at rest in a circular pipe, which is displaced by another liquid. The purpose of this analysis is to show that at a sufficiently high inertia the initial essentially inviscid motion can be extended to cover the entire displacement process, thus creating an inviscid window to which an inviscid analysis can be applied. We simplify the problem first, by considering a 1-liquid problem where the displacing liquid and displaced liquid are the same. We identify two characteristic times in this problem: the time it takes an inviscid liquid …

Characterization Of Key Process Parameters In Injection Blow Molding For Improving Quality, Aspen D'Costa

Online Journal for Workforce Education and Development

The purpose of this study was to discover the performance of significant process parameters in manufacturing 20 oz. plastic beverage bottles. An experimental methodology was carefully designed to examine the characteristics of key variables such as ambient and operating temperatures, process line operators, resin types, resin colors and operating lines associated with a plastic bottle manufacturing line. More explicitly, this study seeks to identify the definitive relationship between the selected process parameters for the production machine (Sidel™) and the ensuing product quality. Also, this study was conducted to evaluate the performance characteristics of Post Consumer Resin (PCR), virgin resin and …

Assessment System Based On Fuzzy Scoring In European Foundation For Quality Management (Efqm) Business Excellence Model, J Dodangeh

Javad Dodangeh

There are a few popular business excellence models that provide standard criteria against which an organization can measure its performances. European Foundation for Quality Management (EFQM) is the most popular one. The organizational self-assessment process is an admissible system in the area of Total Quality Management (TQM). Most specialists concur to the description of self-assessment that is presented by the European Foundation for Quality Management (EFQM). However, the current selfassessment methods in EFQM model have some drawbacks and problems which are scoring in these methods influenced by experts’ judgment and thus, are subjective. Furthermore, these methods cannot consider the empirical …

The Impact Of Change On System Of Systems Performance With An Application To Small And Medium Multihospital Systems, Karima Tayeb

Doctoral Dissertations

An entity that functions as a system of systems (SoS) is composed of multiple systems that individually provide various functions which collectively provide a holistic functional capability. It is complex in design and function and tends to become even more complex over time as it evolves and responds to both internal and external changes. These changes might be in the composition or in the interoperability among its system members. Since interoperability affects how well the members work as one system, managing it is critical to the performance of the SoS over its lifespan.

In support of this goal, this dissertation, …

Metaheuristics For Hub Location Models, Ornurai Sangsawang

All Dissertations

In this research, we propose metaheuristics for solving two p-hub median problems.. The first p-hub median problem, which is NP-hard, is the uncapacitated single p-hub median problem (USApHMP). In this problem, metaheuristics such as genetic algorithms, simulated annealing and tabu search, are applied in different types of representations. Caching is also
applied to speed up computational time of the algorithms. The results clearly demonstrate that tabu search with a permutation solution representation, augmented with caching is the highest performing method, both in terms of solution quality and computational time among these algorithms for the USApHMP. We also investigate the performance …