Operations Research, Systems Engineering and Industrial Engineering Commons^™

Designing And Manufacturing Microelectronic Packages For High-Power Light-Emitting Diodes, Brian Wright, Jianbiao Pan, Richard Savage

Industrial and Manufacturing Engineering

A new microelectronic package was designed for a high-power light-emitting diode (LED). The objective was to build a package that enables the LED to operate with currents as high as 2 Amps. An innovative thin-film interface has been developed to electrically connect the cathode of the LED die to a 22AWG Cu wire. This thin-film interface is wirebondable and solderable, and consists of three layers: Au, Ni93/V7, and Si. Four 1 mil Au wirebonds, supporting 2A of maximum current, connect the Au thin-film to the LED die cathode. Sn96Ag4 solder is used for connecting the Ni93/V7 thin-film to the 22AWG …

In-House Development Of Scheduling Decision Support Systems: Case Study For Scheduling Semiconductor Device Test Operations, Tali Freed, K. H. Doerr, T. Chang

Industrial and Manufacturing Engineering

Most manufacturing processes can benefit from an automated scheduling system. However;: the design of a fast, computerised scheduling system that achieves high-quality results and requires minimal resources is a difficult undertaking. Efficient .. scheduling of a semiconductor device test facility requires an information system that provides good schedules quickly. Semiconductor device testing-is the last stage of the long semiconductor manufacturing process, and therefore. is subjected to customer service pressures. The cost of an off-the-shelf computerised scheduling system may he prohibitive for many companies. In addition, many companies are taken aback by other characteristics of off-the-shelf scheduling systems, such as code …

Fabrication Of Functionally Graded 3a/5a Zeolites By Electrophoretic Deposition, X. Wang, E. A. Olevsky, E. Bruce, M. B. Stern, D. T. Hayhurst

Industrial and Manufacturing Engineering

Functionally graded zeolites of molecular sieve type 3A and 5A are deposited by electrophoretic deposition (EPD) from acetone suspension with 8% volume concentration of n-butylamine as particle charging agent. The EPD characteristics of both 3A and 5A suspensions are studied. Functionally graded zeolite 3A/5A deposits are obtained at 200 V DC. Energy dispersive X-ray dispersion (EDX) analysis results confirm the graded structure. The deposited zeolites are also analysed by scanning electron microscopy (SEM). The factors influencing the deposition process are discussed.

Evaluation Of Surface Residual Stresses In Friction Stir Welds Due To Laser And Shot Peening, Omar Hatamleh, Iris V. Rivero, Jeds Lyons

Iris V. Rivero

The effects of laser, and shot peening on the residual stresses in friction stir welds (FSW) has been investigated. The surface residual stresses were measured at five different locations across the weld in order to produce an adequate residual stress profile. The residual stresses before and after sectioning the coupon from the welded plate were also measured, and the effect of coupon size on the residual stress relaxation was determined and characterized. Measurements indicate that residual stresses were not uniform along the welded plate, and large variation in stress magnitude could be exhibited at various locations along the FSW plate. …

The Benefits Of Automatic Data Collection In The Fresh Produce Supply Chain, Ryan Charles Panos, Tali Freed

Industrial and Manufacturing Engineering

The potential for RFID based systems to improve the safety and efficiency of a supply chain with rapidly decaying products and strict health standards is creating pressure to adopt RFID in several agricultural industries. A handful of fresh produce industry leaders currently participate in mandated pilot projects, while the industry as a whole is still intimidated by the perceived cost of RFID. Therefore in this study we attempt to validate the correlation between performance and automated data collection, paving the way to economic justification of investment in data collection technologies, such as barcode and RFID.

The majority of product in …

Reinforcement Learning Based Output-Feedback Control Of Nonlinear Nonstrict Feedback Discrete-Time Systems With Application To Engines, Peter Shih, Jonathan B. Vance, Brian C. Kaul, Jagannathan Sarangapani, J. A. Drallmeier

Electrical and Computer Engineering Faculty Research & Creative Works

A novel reinforcement-learning based output-adaptive neural network (NN) controller, also referred as the adaptive-critic NN controller, is developed to track a desired trajectory for a class of complex nonlinear discrete-time systems in the presence of bounded and unknown disturbances. The controller includes an observer for estimating states and the outputs, critic, and two action NNs for generating virtual, and actual control inputs. The critic approximates certain strategic utility function and the action NNs are used to minimize both the strategic utility function and their outputs. All NN weights adapt online towards minimization of a performance index, utilizing gradient-descent based rule. …

Fabrication Of Net-Shape Functionally Graded Composites By Electrophoretic Deposition And Sintering: Modeling And Experimentation, E.A. Olevsky, X. Wang, A. Maximenko, M.A. Meyers

Industrial and Manufacturing Engineering

It is shown that electrophoretic deposition (EPD) sintering is a technological sequence that is capable of producing net-shape bulk functionally graded materials (FGM). By controlling the shape of the deposition electrode, components of complex shapes can be obtained. To enable sintering net-shape capabilities, a novel optimization algorithm and procedure for the fabrication of net-shape functionally graded composites by EPD and sintering has been developed. The initial shape of the green specimen produced by EPD is designed in such a way that the required final shape is achieved after sintering-imposed distortions. The optimization is based on a special innovative iteration procedure …

The Current Generation Of Integrated Engineering Curriculum, Michael A. Collura, Samuel Bogan Daniels, Jean Nocito-Gobel, David Harding

Engineering and Applied Science Education Faculty Publications

In September of 2004 our university adopted the Multidisciplinary Engineering Foundation Spiral Curriculum as the basis for disciplinary engineering programs in Chemical, Civil, Electrical, Mechanical and General Engineering. The curriculum includes a sequence of first and second year engineering courses, matched closely with the development of students’ mathematical sophistication and analytical capabilities and integrated with course work in the sciences. Students develop a conceptual understanding of engineering basics in this series of courses which stress practical applications of these principles. The new curriculum was designed to provide students with a multidisciplinary perspective while developing basic engineering skills and fostering an …

Civil And Mechanical Engineering Students Learning Mechanics In A Multidisciplinary Engineering Foundation Spiral, Jean Nocito-Gobel, Gregory Broderick, Samuel Bogan Daniels, Michael Collura, Richard Stanley

Engineering and Applied Science Education Faculty Publications

This paper describes how mechanical and civil engineering students are introduced to and develop an understanding of mechanics concepts through a sequence of integrated courses as part of a new curriculum taken during the freshman and sophomore years. The Multi- Disciplinary Engineering Foundation Spiral is a four-semester sequence of engineering courses, matched closely with the development of students’ mathematical sophistication and analytical capabilities and integrated with course work in the sciences. Students develop a conceptual understanding of engineering basics in this series of courses, which stress practical applications of these principles. Mechanics concepts are introduced in a pair of first …

Investigation Of The Lead-Free Solder Joint Shear Performance, James Webster, Jianbiao Pan, Brian J. Toleno

Industrial and Manufacturing Engineering

Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The purpose of this study is to investigate the effects of reflow profile and thermal shock on the shear performance of eutectic SnPb (SnPb) and Sn3.0Ag0.5Cu (SAC305) solder joints. Test boards were assembled with four different sized surface mount chip resistors (1206, 0805, 0603 and 0402). Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb were developed with three levels of peak temperature (12ºC, 22ºC, and 32ºC above solder liquidus temperature, or 230ºC, 240ºC, and 250ºC for SAC …

"Minimizing Injuries Resulting From Patient Handling In Nursing Home Staff" - A Hazard Control Plan, Vikas Singh

Vikas Singh

A concise hazard control plan for "Minimizing Injuries Resulting from Patient Handling In Nursing Home Staff".

Synthesis Of Gold Micro- And Nano-Wires By Infiltration And Thermolysis, E.A. Olevsky, X. Wang, E. Bruce, M.B. Stern, S. Wildhack, F. Aldinger

Industrial and Manufacturing Engineering

An approach for synthesizing micro- and nano-sized gold wires by infiltration and thermolysis is investigated. A porous ZrO₂ ceramic preform with aligned pores obtained by unidirectional freezing and freeze-drying is employed as an infiltration template. The sintered porous ZrO₂ preform is then infiltrated by a brushing gold solution. The thermolysis is conducted at 600 °C in air. Micro- and nano-sized gold wires are developed within the walls of the pores after thermolysis. The diameter of the gold wires ranges from several hundred nanometers to several microns.

Automatización Del Sistema De Comunicación Entre Equipos De Proceso Y Llenado Uht/Uat Larga Vida En La Planta De Producción Algarra S.A, Andres Ricardo Pedraza Leguizamon

Ingeniería en Automatización

No abstract provided.

Backward And Forward Compatibility, Jianbiao Pan, Jasbir Bath, Xiang Zhou, Dennis Willie

Industrial and Manufacturing Engineering

In response to the European Union (EU) Restriction of Hazardous Substances (RoHS) and other countries’ impending lead-free directives, the electronics industry is moving toward lead-free soldering. Total lead-free soldering requires not only lead-free solder paste but also lead-free printed circuit board (PCB) finish and lead-free component/packages. Transitioning tin-lead (SnPb) soldering to totally lead-free soldering is a complex issue and involves movement of the whole electronics industry supply chain. In reality, there is a transition period.

Near Optimal Output-Feedback Control Of Nonlinear Discrete-Time Systems In Nonstrict Feedback Form With Application To Engines, Peter Shih, Brian C. Kaul, Jagannathan Sarangapani, J. A. Drallmeier

Electrical and Computer Engineering Faculty Research & Creative Works

A novel reinforcement-learning based output-adaptive neural network (NN) controller, also referred as the adaptive-critic NN controller, is developed to track a desired trajectory for a class of complex nonlinear discrete-time systems in the presence of bounded and unknown disturbances. The controller includes an observer for estimating states and the outputs, critic, and two action NNs for generating virtual, and actual control inputs. The critic approximates certain strategic utility function and the action NNs are used to minimize both the strategic utility function and their outputs. All NN weights adapt online towards minimization of a performance index, utilizing gradient-descent based rule. …

Neural Network Controller Development And Implementation For Spark Ignition Engines With High Egr Levels, Jonathan B. Vance, Atmika Singh, Brian C. Kaul, Jagannathan Sarangapani, J. A. Drallmeier

Electrical and Computer Engineering Faculty Research & Creative Works

Past research has shown substantial reductions in the oxides of nitrogen (NOx) concentrations by using 10% -25% exhaust gas recirculation (EGR) in spark ignition (SI) engines (see Dudek and Sain, 1989). However, under high EGR levels, the engine exhibits strong cyclic dispersion in heat release which may lead to instability and unsatisfactory performance preventing commercial engines to operate with high EGR levels. A neural network (NN)-based output feedback controller is developed to reduce cyclic variation in the heat release under high levels of EGR even when the engine dynamics are unknown by using fuel as the control input. A separate …

Enhancing Design Learning Using Groupware, Andrew Wodehouse, Ozgur Eris, Hillary Grierson, Ade Mabogunje

Ozgur Eris

Project work is increasingly used to help engineering students integrate, apply and expand on knowledge gained from theoretical classes in their curriculum and expose students to `real world' tasks. To help facilitate this process, the department of Design, Manufacture and Engineering Management at the University of Strathclyde has developed a web-based groupware product called LauLima to help students store, share, structure and apply information when they are working in design teams. This paper describes a distributed design project class in which LauLima has been deployed in accordance with a Design Knowledge Framework that describes how design knowledge is generated and …