Operations Research, Systems Engineering and Industrial Engineering Commons^™

Farmbot Trackless Redesign, Cole Thomas, Cailey Kamm, Clayton Alderson, Otto Akerstrom

Industrial and Manufacturing Engineering

For this project the team PLANT3D worked along with Rory Aronson and FarmBot to generate a cheaper more user-friendly design for the FarmBot Genesis 1.3. Working with Rory and FarmBot, we as a team generated a list of design requirements and engineering specifications for the project. These requirements centered around creating a more accessible FarmBot model for the average person to be able to purchase and set up with ease. Much of this required taking the existing system and eliminating the most common problem areas. These were the track system, built using 1.5 meter aluminum extrusions and the complex interchangeable …

Fixing Vertebral Compression Fractures With Medtronic, Kelly Fitzgerald, Trevor Bingham, Alex Denbaugh, Jordan Tang, Jon Stearns

Industrial and Manufacturing Engineering

No abstract provided.

High Bay Capacity Utilization Tool, Dante C. Mazzanti, Skyler L. Schilke, Conner P. Lawston

Industrial and Manufacturing Engineering

Northrop Grumman’s Space Park facility has many inefficiencies in their high bay scheduling processes. Additionally, it is very hard for project managers to figure out the capabilities of each high bay in order to schedule their specific project. The purpose of this project is to develop a tool that can be used across the facility to easily create projects, assign projects, view room capabilities, and view a master schedule of the rooms. After researching commercially available tools, our approach to designing this system was to use tools that are already utilized at the facility (Microsoft Suite and Tableau) and engineer …

The Pad Route Setting Process Design, Katherine M. Peterson, Dylan C. Breitenbucher

Industrial and Manufacturing Engineering

This study took place at The Pad Climbing, a rock climbing gym in San Luis Obispo. The problem was that the process of setting new climbing routes was time - consuming and potentially dangerous. This resulted in lower capacity, high labor costs, decreased customer satisfaction, and safety risk for employees and customers. The objective of this study was to analyze the route setting process and identify areas of waste and danger, then to redesign the process to improve these areas. Techniques such as time studies, Pareto charts, and process flow mapping were used to analyze the existing process. A new …

Design And Testing Of A Hands-Free Toilet Seat Opener/Closer, Jordan Benjamin Schaeffer

Industrial and Manufacturing Engineering

People tend to get frustrated when the toilet seat must be moved up or down before use. Men and women often leave the toilet seat in different positions when finished which can cause problems when men and women use the same bathroom. With gender neutral bathrooms gaining in popularity, this frustration will only increase. The objective of this project was to design and test a hands-free system to allow a user to quickly and easily open or close a toilet seat. For the product to be viable, it will have to be durable and easy to clean around, while also …

Solar Electric Immersion Heating Element Fabrication, Logan V. Kregness

Industrial and Manufacturing Engineering

Believing that cooking with flame is cheaper and more efficient than cooking with electricity, Ugandan citizens have exposed themselves to several health and safety risks, including major respiratory issues through harmful emissions, pollution, and the burning down of many homes. Even though solar electric cooking is cheaper and healthier than cooking with flames in the long run, many Ugandans lack the resources to invest in cooking with electricity.

The Solar Stove student research team, led by Dr. Pete Schwartz, partnered with Aid Africa to bring solar panels and prototype solar electric cooking units to villages in Uganda. Observing how their …

Connected Alerts Across Manufacturing Facilities, Jordan J. Moy

Industrial and Manufacturing Engineering

The lack of communication during a large project can result in costly delays when striving to achieve previously defined benchmarks. Often times, each part of a project will require verification from an employee of a specified area of expertise before being allowed to advance to the next stage. Finding these individuals can be extremely hard due to the large, spread out campus of manufacturing facilities as well as the numerous projects the company is concurrently working on. These floor support requests can sometimes take from an hour to even a whole work day, causing major delays in the production schedule. …

Process Improvement At "The Manse On Marsh", Kevin C. Manko

Industrial and Manufacturing Engineering

The Manse on Marsh is an independent and assisted living facility that prides itself on providing life-enriching care for the elderly. Considering that the staff is essential to supply this care and turnover rates are a constant factor, the company would like to reduce the time it takes to hire new employees by at least one week. To facilitate this goal, process flow maps are utilized to assess the current state of the hiring process and metrics are applied to support future state design decisions. After performing a value added analysis and identifying areas of waste, a total of 20 …

Atlas Copco Mafi-Trench Co. Inventory Management, Logan E. Barr, Sean P. Mcgaffigan

Industrial and Manufacturing Engineering

This Senior Project Report includes three areas of focus pertaining to the inventory management practices of Atlas Copco Mafi-Trench Company (ACMTC) - cycle counting, ergonomics, and material purchasing. Various literature reviews as well as an analysis of the current state led to the project objectives. First, reduce time spent on the non-value added process of cycle counting. Second, eliminate the ergonomic hazard presented by the heavy inventory bins. Lastly, diminish the totals costs associated with inventory (ordering + carrying). The project objectives spurred numerous alternatives and a few specific deliverables. The creation of a ‘Small Parts Cycle Count’ Excel file …

Facilities Redesign Of Stockroom At Elcon Precision, David M. Brawner, Tyler O. Mastromattei, Jay Y. Matsumoto

Industrial and Manufacturing Engineering

Elcon Precision is a company based out of San Jose, California specializing in the photochemical processing of materials and brazing of metals and ceramics for a variety of different industries. Three students from the Industrial Engineering Department at California Polytechnic State University, San Luis Obispo were contacted by Elcon Precision to help redesign their stockroom and inventory areas in their San Jose location in order to allow for the future growth of the company. Elcon asked the Cal Poly project team to help increase efficiencies throughout the stockroom by creating an alternative layout that best suited the company's needs. This …

Improving Efficiencies For The Loading And Packaging Departments At San Luis Sourdough, Alexis Bergstrom, Isabella Pereira, Claudia Robinson

Industrial and Manufacturing Engineering

San Luis Sourdough, currently has issues with efficiency and standardization in their packaging department, ergonomics problems in the packaging department, shipment accuracy in their loading department, and lacks an organized layout design. As a result, four objectives were designed within a six month period. The first was to create standard operating procedures for the packaging department. To inform this decision time studies were performed before and after creating these SOPs. It was discovered that there was a clear need for the SOPs due to variation in packaging efficiency among new and experienced associates. The second set of time studies showed …

Database Implementation For Fines Management Of Student Organization, Parker K. Nomura

Industrial and Manufacturing Engineering

The Delta Upsilon fraternity at California Polytechnic State University in San Luis Obispo, California, currently has no formal system for fines management. This facilitated over $9000 in uncollected dues and fines during the 2016-17 academic year. The executive board have difficult access to accurate financial information and general members have difficult access to personal fines information. This project aims to design, implement, and test a fines management system to reduce the annual amount of unpaid dues by $4500. The system is to be cost-effective, which will be measured as a decrease in uncollected dues. The system will be beneficial to …

Development Of An Additive Manufacturing Compression Molding Process For Low Cost In-House Prototyping, Grant Forrester Warden

Industrial and Manufacturing Engineering

Composite parts can be manufactured using various processes. Generally, a mix of resin and fiber is formed into the desired geometry using a mold and pressure. One process used by Dr. Joseph Mello in his research is known as compression molding. Compression molds are generally made from large billets of aluminum or stainless steel, are machined by a CNC mill, and are then hand-finished with polishes and mold preparation products. This process is expensive, requires large machinery and experienced operators, and introduces long lead times relative to the design cycle of the part being manufactured. The nature of Dr. Mello's …

Designing A Manufacturing System To Reduce Production Learning Curve, Nicholas Devin Kuhnsman

Industrial and Manufacturing Engineering

The goal of this project was to design a new manufacturing system for Patio Pacific that would reduce the learning curve and the skilled labor required in the production process. Multiple ideas to decrease the scrap rate in the vert manufacturing process were tested. It was determined that outsourcing the manufacturing of the vertical frame piece was the most optimal because it would reduce overall cost and increase product quality. A new facility and production layout were designed in order to accommodate the new pre-manufactured parts. The approved facility design included a new production flow that transitioned manufacturing from single …

Reducing Overall Overtime Hours Accumulated By San Luis Sourdough, Marie Scholl, Emily Vallejos, Randall Yonce

Industrial and Manufacturing Engineering

The packaging department of San Luis Sourdough Company was redesigned to increase bread throughput and decrease overtime hours issued to employees. Time studies were performed to get an accurate representation of the average throughput of bread with the current packaging conveyor system. After collecting data and surveying the employees and management, we came up with three design solutions to improve their current packaging system. The first design recommendation has a low-investment and is quick to implement as it pertains to changing the worker’s schedule to alleviate the employees from working long hour shifts while increasing the bread throughput. The second …

The Design Of A Digital Scheduling Solution For Healing Alternatives, Hailey A. Malin, Krista L. Mcallester, Anne E. Shields

Industrial and Manufacturing Engineering

The focus of this senior project is to assist Healing Alternatives, an acupuncture clinic located in San Luis Obispo, in developing a business management software to fit their needs and boost their overall organization. The approach to finding the right fit for this business included assessing their current system while simultaneously investigating other providers. Once alternatives were found that met all of Healing Alternatives’ initial requirements, trial demos were generated in order to perform user experience testing. The presented final solution, a scheduling software called Acuity Scheduling, was implemented in a three-phase move plan that occurred over the period of …

Slm Materials Development, Justin G. Reiner, Michael T. Schembri

Industrial and Manufacturing Engineering

The purpose of this project was to create a procedure to efficiently determine a “recipe” of parameter values that create a desired set of mechanical properties. Research was conducted into the laser powder bed fusion process with focus on underdeveloped materials. A design of experiment was used with a set of density correlated parameters to establish a method of producing nearly dense parts. Our methods include SLM printing, metrology, and statistical analysis. An experimental procedure for materials development was designed, but unable to be validated during the scope of this project, due to unforeseen safety issues (exposure to Chromium 6, …

Julian's Forecasting, Krista R. Bowdle

Industrial and Manufacturing Engineering

This report focuses on developing a solution to a current problem faced at Julian’s Cafe and Bistro. The problem is that inaccurate order quantities are leading to inventory shortage and surplus which is causing unnecessary profit loss. After accessing and analyzing historical sales data, several forecasts were created using various approaches. After assessing each method and applying a mean absolute percentage error to see how accurate the forecasts were, the seasonal forecast with removing outliers initially was the selected method. After, this method was used to forecast the top three selling items at Julian’s and make demand predictions for busy …

Healing Alternatives Workspace Remodel, Lissandra Ilcyn, Jenifer Astrid Colmenares, Grace E. Kuffner

Industrial and Manufacturing Engineering

Healing Alternatives is an acupuncture office space located in a repurposed house in San Luis Obispo. Healing Alternatives’ current facility layout does not allow for an additional treatment room or the space to provide additional services because of the wasted space within the facility. Furthermore, patients can be disrupted by noise outside the treatment room causing a negative customer experience. The project team’s objectives are to:

o Design two layout alternatives

o Provide a time estimate for each alternative

o Provide a cost analysis of each alternative

o Implement 5s methodology on the storage room

o Provide a 2D-3D model …

Vial Of Life Redesign, Andrew Scott Heim, Marisonn Manalo

Industrial and Manufacturing Engineering

Cambria Anonymous Neighbors (CAN), a nonprofit organization assisting the residences of Cambria, hopes to standardize first responder procedures and make medical information easily accessible in case of a medical emergency. Currently the container costs $3.78. CAN would like to provide 2000 containers at a lower cost. After researching materials, acrylic was found to be the best option for the container material due to its low cost and durability. A laser cutter was used to cut the acrylic pieces, and then a set of step by step instructions were created to assemble the product. To reduce the cost of acrylic, the …

Analysis Of Verification And Validation Techniques For Educational Cubesat Programs, Noah Weitz

Master's Theses

Since their creation, CubeSats have become a valuable educational tool for university science and engineering programs. Unfortunately, while aerospace companies invest resources to develop verification and validation methodologies based on larger-scale aerospace projects, university programs tend to focus resources on spacecraft development. This paper looks at two different types of methodologies in an attempt to improve CubeSat reliability: generating software requirements and utilizing system and software architecture modeling. Both the Consortium Requirements Engineering (CoRE) method for software requirements and the Monterey Phoenix modeling language for architecture modeling were tested for usability in the context of PolySat, Cal Poly's CubeSat research …

Building A Database For A Startup: Boltabout, Danielle Tran

Industrial and Manufacturing Engineering

BoltAbout is a young start-up based out of San Luis Obispo, CA. Their primary business is renting out bikes via monthly-subscription with the opportunity to lease to own. BoltAbout has seen great success over the past 2 years and is looking to expand. The company currently has 200 bikes, but the demand is far outweighing the supply. The CEO of BoltAbout hopes to grow to grow the company’s inventory to 500 bikes by the end of 2017 and 1500 by the end of the school year. As the company continues to expand, it will need to be able to accurately …

Reducing Same Day Missed Appointments, Lucas Madison, Tyler Moore, Jolani Chun-Moy

Industrial and Manufacturing Engineering

Radiology Associates (RA) is a diagnostic imaging center that offers high-quality, digital medical imaging and interventional radiology services for patients, physicians and healthcare organizations across the Central Coast. They are an ongoing problem that involves a considerable portion of their patients not showing up for their appointments Our project aims to reduce same day missed appointments at Radiology Associates. Radiology Associates currently has a no-show rate of 13.48%. They lose approximately $240 for every same day missed appointment. Our goal was to find new ways to reduce their no-show rate to 8%. Based on our calculations, Radiology Associates could save …

Student Shop Access And Inventory Control In The College Of Architecture And Environmental Design Shops, Ryan Raj Mattel, Chris Steven Chen, Kevin Michael Gallagher

Industrial and Manufacturing Engineering

The Cal Poly College of Architecture and Environmental Design shops, directed by David Kempken, give the opportunity for thousands of students to use the “Learn By Doing” philosophy and operate various machinery, tooling, and devices to complete projects inside and outside of the classroom. These students are able to check out tools and machinery to complete these projects on a weekly basis. This report will discuss the complexities and shortcomings of the current database system, FileMaker Pro, that is used for these transactions. The report will furthermore discuss the design and methodology of replacing this system with an improved integrated …

Crystal Engineering Manufacturing Facility Analysis, Maximiliano Cortes, Eric Dustin Kornrumpf, Sthefano Alvarado

Industrial and Manufacturing Engineering

This report will encompass a two-quarter long senior project effort to provide a recommendation for the client, Crystal Engineering. Crystal Engineering is currently in the process of introducing three new products, one now and two within the next six months. However, their existing lines already occupy the available production space and as a result, they are unable to determine how to effectively incorporate new production lines within the facility. Therefore, the main objectives of this project were to deliver several facility redesign layouts backed by a holistic justification for each. The formulation of the facility redesign layouts incorporated several industrial …

Sensel Morph: Product Communication Improvement Initiative, Kasper W. Lui-Delange, Samuel Distler, Rafael Paroli

Industrial and Manufacturing Engineering

Sensel is a startup company that recently launched their first product. The Morph is a multi-functional touch interface that interacts with a wide range of software through touching enabled silicon overlays. The support documentation was believed to cause confusion, which is leading to limited sales and increased returns. We focused on the structures of its website and product documentation, which were initially developed without end user testing. Our team explored Sensel’s current state to develop two multiphase design alternatives. These designs provide multiple user-facing testing frameworks as well as determine the root-cause of the Morph’s current communication issues. The designs …

Improving Warehouse Capacity For Synergy Manufacturing, Brian Garcia

Industrial and Manufacturing Engineering

This report aims to aid Synergy Manufacturing (a well-recognized producer of high-performance components for off-roading vehicles) to improve in-house production capacity in wake of an expanded facility space and substantial increase in the number of current available products over the span of a few years. Current warehouse issues include struggling to meet demand, high inventory, and an unsafe overcrowding of WIP on the floor space. The steps taken to resolve these issues are to collect setup times, operational times, total process times, machine tool usage, and flow process from a selected group of five high-demand items from Synergy Manufacturing’s current …