Operations Research, Systems Engineering and Industrial Engineering Commons^™

Simulation Analysis Of The Distrix Protocol For Political Redistricting, Cui Fu

Theses and Dissertations

This thesis explores the process of political redistricting, a crucial component of ensuring fair representation in legislative bodies. The study first outlines the background and criteria of redistricting in the United States, emphasizing important criteria such as equal population, racial fairness, contiguity, and political fairness. It then focuses on the Distrix protocol for political redistricting in which two or more players (i.e., political parties) take turns assigning small pieces of territory to districts until no more unassigned territory remains. The Distrix protocol was recently introduced in a board game of the same name. After describing the Distrix protocol, we present …

Experimental Comparison Of Load Sharing Techniques For Fast Motion In Industrial Machines, Eike Marten Hillrichs

Theses and Dissertations

Load sharing and synchronization techniques are essential for modern automation applications where single motor systems cannot meet the application requirements. Evenly sharing the load between multiple motors can increase the output of processes and reduce maintenance efforts due to uneven wear and tear. Rockwell Automation has developed two load sharing techniques for fast motion control applications. In this Thesis, the two load sharing techniques are experimentally compared regarding their ability to evenly share loads and control synchronized motions in a multi motor setup for fast motion. The techniques are compared using a setup with two motors coupled by a timing …

Advanced Analytics In Smart Manufacturing: Anomaly Detection Using Machine Learning Algorithms And Parallel Machine Scheduling Using A Genetic Algorithm, Meiling He

Theses and Dissertations

Industry 4.0 offers great opportunities to utilize advanced data processing tools by generating Big Data from a more connected and efficient data collection system. Making good use of data processing technologies, such as machine learning and optimization algorithms, will significantly contribute to better quality control, automation, and job scheduling in Smart Manufacturing. This research aims to develop a new machine learning algorithm for solving highly imbalanced data processing problems, implement both supervised and unsupervised machine learning auto-selection frameworks for detecting anomalies in smart manufacturing, and develop a genetic algorithm for optimizing job schedules on unrelated parallel machines. This research also …

Applying A Statistical Approach To Develop A Sustainable Technology For Capturing Phosphorous From An Agricultural Tile Drainage System Using By-Product Phosphorous Sorbing Materials (Psm), Amir Kordijazi

Theses and Dissertations

Due to nutrient pollution, agriculture is one of the major sources of pollution in water bodies. Every time it rains, fertilizers, pesticides, and animal waste wash nutrients and pathogens—such as bacteria and viruses—into waterways. As rainfall increases due to climate change, the water problem will worsen. One of the nutrients that extensively contributes to the degradation of water quality is phosphorous (P). In this research, the performance of electric arc furnace (EAF) steel slag was investigated as a P sorbing materials (PSM) according to the conditions present in a P removal structure designed for treating water discharge from an agricultural …

Design Of A Novel Manual And Automated Penetration Testing Framework For Connected Industrial Control Systems (Ics), Rafat Elsharef

Theses and Dissertations

This research presents the design of new framework—a manually executed and an automated penetration testing process for Connected Industrial Control Systems (ICS). Both frameworks were built using open-source security software and ICS equipment currently used in critical infrastructure, manufacturing companies, and other institutions in the United States and around the world. Existing penetration testing frameworks have largely been focused on manual testing and are specific to Information Technology (IT). In addition, a new severity scoring system framework, called Common Vulnerability Scoring System for Industrial Control Systems (CVSS-ICS), was recommended for calculating the severity score in Industrial Control Systems (ICS).The broader …

Math Models And Heuristic Methods For Constructing Fair Political Districts, Roya Ghorashi

Theses and Dissertations

Political parties’ attempts to manipulate district boundaries in order to gain political advantages in the election system lead to huge inefficiency and unfair election results. Previously some studies have developed methods for forming political districts considering various factors such as population equality, compactness, and contiguity; but only a few recent studies have considered political fairness as an objective for redistricting political map.This study attempts to find a solution to draw political districts using political fairness as a factor in addition to integrity, population equality, contiguity, and compactness of the districts in order to prevent gerrymandering. In this research, we introduce …

A Mathematical Approach To Paint Production Process Optimization, Ching-Ya Chuang

Theses and Dissertations

As the global paint market steadily grows, finding the most effective processing model to increase production capacity will be the best way to enhance competitiveness. Therefore, this study proposes two production environments commonly used in the paint industry: build-to-order (BTO) and the variation of a configuration-to-order (CTO), called group production, to schedule paint production. Mixed-Integer Linear Program (MILP) was solved using genetic algorithms (GA) to analyze two production environments with various products, different set-up times, and different average demand for each product. The models determine the number of batches, the size and product of each batch, and the batch sequence …

Bullwhip Effect Of A Closed Leep Supply Chain With And Without Information Sharing Of Customer Demand, Jui-Hsin Hsu

Theses and Dissertations

In recent years, companies have become interested in a closed-loop supply chain that is concerned with the recovery pipeline. The expenses of a company can be influenced by large inventories and backlogs due to the bullwhip effect in the supply chain. Previous literature has shown that the bullwhip effect can be decreased by a reverse supply chain. This paper develops a closed-loop supply chain including seven echelons for recovery of end-of-life products. The model considers the order-up-to inventory policy and the exponential smoothing forecasting with a trend method in the system to assist in determining the ordering quantities. The best …

Novel Approach In Measuring Training Effectiveness, Thomas Samuel

Theses and Dissertations

NOVEL APPROACH IN MEASURING TRAINING EFFECTIVENESS

by

Thomas Samuel

The University of Wisconsin-Milwaukee, 2020

Under the Supervision of Dr. Naira Campbell-Kyureghyan

Conducting training for employees is a popular method, in industry, to increase awareness and competencies of individuals that helps start the journey towards a change in performance. Globally, fiscal investments in the order of hundreds of billions of dollars annually are made by organizations and governments to train employees in various concepts. Of the various types of training programs, safety related training is specifically important as it increases awareness of the work risks to employees and plays a critical …

Remanufacturing Process Planning Considering Quality Uncertainties, Environmental Taxes And Incentives, Kuanjui Chen

Theses and Dissertations

As environmental issues are gradually being valued by governments and societies, companies have begun to engage in economic sustainable practices such as remanufacturing, reuse and recycling, among other socially responsible practices. The broader impact of these practices enables companies to archive the goal of circular economies. Under normal circumstances, consumers’ used products have often been released into landfills, resulting in environmental pollution. This is especially so for electronic products since most materials used in their production are non-biodegradable. This research addresses the practice of remanufacturing. The remanufacturing value of the products gradually declines with the usage--also referred to as the …

Reevaluating Order Fulfillment Decisions For E-Tailers Under True Simulated Operating Conditions, Amir H. Kalantari

Theses and Dissertations

This dissertation makes both a methodological and an applied contribution. From a methodological standpoint, this is among the very first works in the literature to explore the concepts of true simulated operating conditions and fully embedded decision-making algorithms. We illustrate the effectiveness of these concepts by applying them to an online retailer (i.e. e-tailer) order fulfillment decision making process.

Online shopping has completely transformed retail markets in recent years. For customers, it provides convenience, visibility and choice, and for retailers it provides market expansion opportunities, operational cost reduction, and many other advantages. There are fundamental differences between the supply chain …

Sequencing Multiple-Spreader Crane Operations: Mathematical Formulations And Heuristic Algorithms, Shabnam Lashkari

Theses and Dissertations

ABSTRACT

SEQUENCING MULTIPLE-SPREADER CRANE OPERATIONS:

MATHEMATICAL FORMULATIONS AND HEURISTIC ALGORITHMS

by

Shabnam Lashkari

The University of Wisconsin-Milwaukee, 2020

Under the Supervision of Professor Matthew E.H. Petering

Maritime container shipping is one the oldest industries and plays a key role in transporting freight all around the world. The International Maritime Organization (IMO) reports that more than 90% of international trade across the world is carried by sea. This method of transportation is by far the most cost-efficient among rail, road, air, and water transportation.

Today most overseas shipping of finished consumer goods is done via 20-, 40-, or 45-foot long steel …

The Effect Of Kinesiology Tape Application Duration On Endurance Of Knee During An Isotonic Fatiguing Flexion/Extension Exercise, En Yi Wu

Theses and Dissertations

Kinesiology Tape (KT) is an elastic athletic tape and is popular among athletes as it was claimed that it can to be worn for several days and is capable of preventing injuries, improving rehabilitation processes, improving muscle oxygenation levels, and enhancing muscle performance. The goal of this study was to determine if there was any potential enhancing effect of KT on joint endurance in healthy subjects, in particular with respect to time to fatigue (TTF), muscle oxygenation, and muscle activity in fatiguing knee flexion/extension exercise across sessions.

Fourteen healthy male subjects with no previous history of knee injury participated in …

A Reinforcement Learning Approach To Sequential Acceptance Sampling As A Critical Success Factor For Lean Six Sigma, Hani A. Khalil

Theses and Dissertations

In the 21st century, globalization coupled with technological advancement and free trade has created competition among various businesses enterprises. This competition has led many businesses to adopt various management techniques such as acceptance sampling aimed at transforming their processes in order to remain competitive in the global market and adapt to new market demands. The successful implementation of acceptance sampling is highly dependent on what the academic literature refers to as acceptance sampling optimization. A literature review on the optimization of acceptance sampling has not shown any work that studied whether acceptance sampling and machine learning (ML) plans can be …

A Game Modeling Of A Closed-Loop Supply Chain In A Water-Energy Nexus: Technology Advancement, Market Competition And Capacity Limit, Nabeel Hamoud

Theses and Dissertations

Water and energy are two scarce and concerning resources interconnected in the water-energy nexus. In the nexus, production of energy needs water, and production of water needs energy. For better management of these resources in the nexus, this research considers a supply chain that consists of water suppliers, power suppliers, and consumers of these commodities. In the chain, water suppliers purchase power from power suppliers, and power suppliers purchase water from water suppliers. Other consumers can also buy these resources at the water and power markets. Each firm tries to maximize its own profit. The suppliers of water and power …

Dynamic Vehicular Trajectory Optimization For Bottleneck Mitigation And Safety Improvement, Wenqing Chen

Theses and Dissertations

Traffic bottleneck is defined as a disruption of traffic flow through a freeway or an arterial, which can be divided as two categories: stationary bottleneck and moving bottleneck. The stationary bottleneck is mainly formed by the lane drops in the multi-lane roadways, while the moving bottleneck are due to the very slowing moving vehicles which disrupt the traffic flow. Traffic bottlenecks not only impact the mobility, but also potentially cause safety issues.

Traditional strategies for eliminating bottlenecks mainly focus on expanding supply including road widening, green interval lengthening and optimization of intersection channelization. In addition, a few macroscopic methods are …

A Data-Driven Predictive Model Of Reliability Estimation Using State-Space Stochastic Degradation Model, Farhad Balali

Theses and Dissertations

The concept of the Industrial Internet of Things (IIoT) provides the foundation to apply data-driven methodologies. The data-driven predictive models of reliability estimation can become a major tool in increasing the life of assets, lowering capital cost, and reducing operating and maintenance costs. Classical models of reliability assessment mainly rely on lifetime data. Failure data may not be easily obtainable for highly reliable assets. Furthermore, the collected historical lifetime data may not be able to accurately describe the behavior of the asset in a unique application or environment. Therefore, it is not an optimal approach anymore to conduct a reliability …

Two Essays On Distribution, Fulfillment And Pricing Decisions For Retailers With E-Commerce Channel, Khosro Pichka

Theses and Dissertations

E-commerce has grown rapidly in the past decade. In 2015, e-commerce was accounted for 7.2 percent of all retail sales in the U.S., which is massively higher than 0.2 percent in 1998 (U.S. Department of Commerce 2017). Worldwide e-commerce sales also show the same trend and reached $2.356 trillion in 2018 and are expected to grow steadily (Statista 2017). This trend has impacted major areas of operations management including supply chain management and revenue management. Today, e-commerce companies cannot satisfy their customers’ demand using traditional distribution systems. Therefore, retailers with e-commerce channels (e-tailers), cooperate with third party logistic service providers …

Equilibrium Modeling And Policy Analysis Of A Biofuel Supply Chain With A Hydroelectric Reservoir, Jinwoo Bae

Theses and Dissertations

This research proposesd a game theoretic model of a biofuel supply chain (BSC) where a utility company supplies reservoir water to two farmers, located in downstream and upstream of a hydropower dam. The decision-making process of the model is formulated as a three-stage Stackelberg game. We analyze the equilibrium of the decentralized systems and the effect of the government subsidy on energy crop (switchgrass) production for cellulosic biofuel industries, with two forms of subsidy: (1) discriminated subsidies and (2) equalized subsidies.

The results show that both forms of subsidy improve social welfare in the BSC unless the amount of subsidy …

Using Pythagorean Fuzzy Sets (Pfs) In Multiple Criteria Group Decision Making (Mcgdm) Methods For Engineering Materials Selection Applications, Alaa Fouad Momena

Theses and Dissertations

The process of materials’ selection is very critical during the initial stages of designing manufactured products. Inefficient decision-making outcomes in the material selection process could result in poor quality of products and unnecessary costs. In the last century, numerous materials have been developed for manufacturing mechanical components in different industries. Many of these new materials are similar in their properties and performances, thus creating great challenges for designers and engineers to make accurate selections. Our main objective in this work is to assist decision makers (DMs) within the manufacturing field to evaluate materials alternatives and to select the best alternative …

A Hierarchical, Fuzzy Inference Approach To Data Filtration And Feature Prioritization In The Connected Manufacturing Enterprise, Phillip Matthew Lacasse

Theses and Dissertations

The current big data landscape is one such that the technology and capability to capture and storage of data has preceded and outpaced the corresponding capability to analyze and interpret it. This has led naturally to the development of elegant and powerful algorithms for data mining, machine learning, and artificial intelligence to harness the potential of the big data environment. A competing reality, however, is that limitations exist in how and to what extent human beings can process complex information. The convergence of these realities is a tension between the technical sophistication or elegance of a solution and its transparency …

A Biofuel Supply Chain Equilibrium Analysis With Subsidy Consideration, Amirsaman Hamzeh Bajgiran

Theses and Dissertations

Growing environmental concerns in the last few decades along with the energy security issues have led governments to take actions to reduce their dependence on fossil fuels and enhance renewable energy usage, including biofuels. Enforcement of federal or state mandates and regulations that obligate a certain amount of biofuel production are one of the main levers that governments use to achieve their goals. In the U.S. as an example, Renewable Fuel Standard (RFS) requires the production of 36 billion gallons of ethanol by 2022, 21 billion gallons of which should be advanced biofuels derived from biostocks other than corn starch. …

A Microscopic Simulation Laboratory For Evaluation Of Off-Street Parking Systems, Yun Yuan

Theses and Dissertations

The parking industry produces an enormous amount of data every day that, properly analyzed, will change the way the industry operates. The collected data form patterns that, in most cases, would allow parking operators and property owners to better understand how to maximize revenue and decrease operating expenses and support the decisions such as how to set specific parking policies (e.g. electrical charging only parking space) to achieve the sustainable and eco-friendly parking.

However, there lacks an intelligent tool to assess the layout design and operational performance of parking lots to reduce the externalities and increase the revenue. To address …

Heuristic Algorithm To Minimize Total Weighted Tardiness On The Unrelated Parallel Machine With Sequence Dependent Setup And Future Ready Time, Tzu Yi Li

Theses and Dissertations

This study presents a heuristic algorithm to minimize total weighted tardiness on unrelated parallel machines with sequence-dependent setup time and future ready time. We propose a new rule based on Apparent Tardiness Cost (ATC). The performance of the rule is evaluated on unrelated parallel machines. In order to solve a problem, we use a look-ahead method and a job-swap method. When a machine becomes idle, the heuristic compares the jobs on the machine and selects the one with the smallest total tardiness value to carry out a process.

The propose heuristic is divided into three stages: The first stage employs …

In Silico Analysis Of Advanced Processing Methods For Light-Weight Alloys Powders, Marjan Nezafati

Theses and Dissertations

Light-weight Al and Mg-based metal-matrix nanocomposites (MMNCs) are lauded as one of the most promising structural materials for vehicle, military, and construction applications. These MMNCs are often synthesized using the powder metallurgy (PM) process under liquid nitrogen cryogenic environments to control the grain sizes. It is believed that proper incorporation of the nitrogen species into the bulk lattice during processing could strongly enhance the mechanical properties of MMNCs by forming N-rich dispersoids. In this work, using the density-functional theory (DFT), the adsorption, absorption and diffusion behavior of nitrogen molecule/atoms have been studied and related to t Al and Mg MMNC …

Demand Side Management For Building Energy Efficiency Through Hybrid Daylighting System And Battery Energy Storage System, Tonghui Li

Theses and Dissertations

This dissertation aims to investigate demand side management (DSM) to improve building energy efficiency and reduce on-peak electricity demand. Daylighting device and battery energy storage system (BESS) for peak shaving are proposed and studied. To reduce the cost and improve the efficiency of building lighting, an innovative parabolic trough solar lighting and thermal (PTL/T) system is designed and analyzed. In the proposed system, a parabolic trough collector (PTC) controlled by two-axis solar tracking system is used as solar collector. The collected sunlight is split by a cold mirror into visible light and infrared light. The visible light is reflected by …

The Effect Of Kinesiology Tape During Isotonic Knee Flexion Extension Exercise On Time To Fatigue, Rate, And Quadricep Muscle Oxygenation, Yu-Wei Wang

Theses and Dissertations

Some Kinesiology Tape manufacturers claim that Kinesiology Tape (KT) can enhance performance and increase blood flow. Therefore, this study recruited 14 healthy male subjects (college population, 182.9 ± 5.1 cm, 76.52 ± 10.2 kg). to complete an eight-day KT intervention experiment. On Day 1 and Day 2 the subjects did not wear KT. During Days 3 to 6 the subjects wore the KT on their dominant leg (treatment leg) only. Limb dominance was defined by asking the subjects which leg they use to kick a ball. During Days 7 and 8 the subjects did not wear KT. Furthermore, the KT …

Optimal Decision Making For Capacitated Reverse Logistics Networks With Quality Variations, Sajjad Farahani

Theses and Dissertations

Increasing concerns about the environmental impact of production, product take-back laws and dwindling natural resources have heightened the need to address the impact of disposing end-of-life (EOL) products. To cope this challenge, manufacturers have integrated reverse logistics into their supply chain or chosen to outsource product recovery activities to third party firms. The uncertain quality of returns as well as uncertainty in return flow limit the effectiveness of planning, control and monitoring of reverse logistics networks. In addition, there are different recovery routes for each returned product such as reuse, repair, disassembling, remanufacturing and recycling. To determine the most profitable …

Introduction Of Similarity Coefficient-Based Clustering Algorithms To Global Petrochemical Facility Location, Ali Saeed Alarjani

Theses and Dissertations

This research introduces a similarity coefficient-based clustering algorithm to determine the best location for a petrochemical manufacturing facility. The most global petrochemical critical attributes have been selected from relevant literature about manufacturing activities. These critical attributes have been quantified by real world numbers from the World Bank database and have been employed in the proposed model of the research. The model of the research uses the selected critical attributes data and clusters a hundred countries in similar groups according to their attractiveness level to the petrochemical facility location.

The outcomes of the developed model are classifications that show the potential …

Strategic Nurse Allocation Policies Under Dynamic Patient Demand, Osman Tuncay Aydas

Theses and Dissertations

ABSTRACT

STRATEGIC NURSE ALLOCATION POLICIES UNDER DYNAMIC PATIENT DEMAND

by Osman T. Aydas

The University of Wisconsin-Milwaukee, 2017

Under the Supervision of Professor Anthony D. Ross

Several studies have shown a strong association between nurse staffing and patient outcomes. When a nursing unit is chronically short-staffed, nurses must maintain an intense pace to ensure that patients receive timely care. Over time this can result in nurse burnout, as well as dissatisfied patients and even medical errors. Improved accuracy in the allocation of nursing staff can mitigate these operational risks and improve patient outcomes. Nursing care is identified as the single …