Operations Research, Systems Engineering and Industrial Engineering Commons^™

Computational Decision Support For Socio-Technical Awareness Of Land-Use Planning Under Complexity—A Dam Resilience Planning Case Study, Andreas Tolk, Jennifer A. Richkus, F. Leron Shults, Wesley J. Wildman

VMASC Publications

Land-use planning for modern societies requires technical competence as well as social competence. We therefore propose an integrative solution enabling better land-use planning and management through better-informed decision-making. We adapt a method developed for cross-disciplinary team building to identify the stakeholders and their various objectives and value systems. We use these results to populate artificial societies embedded into a dynamic data analytics framework as a tool to identify, explore, and visualize the challenges resulting from the different objectives and value systems in land-use planning and management. To prove the feasibility of the proposed solution, we present two use cases from …

Simulation, Optimization, And Economic Assessment Of Pelamis Wave Energy Converter, Hana Ghaneei, Mohammadreza Mahmoudi

Faculty Peer-Reviewed Publications

Wave energy and power is accessible on almost any body of water. One of the most widely known floating structures to generate renewable energy from the seas and the ocean is wave energy converter Pelamis. In this study, an attempt was made to simulate the dynamic behaviour of Pelamis P2 in the software AQWA under the influence of a nonlinear second-order Stokes wave. Pelamis P2 was simulated in different marine conditions including different water depths, wave heights, periods, and angles to assess its optimal operation. With the results in mind, it can be argued that with an increase in water …

Combining Green Metrics And Digital Twins For Sustainability Planning And Governance Of Smart Buildings And Cities, Casey R. Corrado, Suzanne M. Delong, Emily G. Holt, Edward Y. Hua, Andreas Tolk

VMASC Publications

Creating a more sustainable world will require a coordinated effort to address the rise of social, economic, and environmental concerns resulting from the continuous growth of cities. Supporting planners with tools to address them is pivotal, and sustainability is one of the main objectives. Modeling and simulation augmenting digital twins can play an important role to implement these tools. Although various green best practices have been utilized over time and there are related attempts at measuring green success, works in the published literature tend to focus on addressing a single problem (e.g., energy efficiency), and a comprehensive approach that takes …

Manufacturing: The Qualitative Study Of A Transition To A Green Facility, Brandon David Staves

Masters Theses & Specialist Projects

This qualitative study focused on answering three core questions: How have facilities reduce pollutions in regards to the quality of air, water, land, light and noise? Which Types of pollution reduction projects are more or less successful to implement? What types of pollution are facilities focusing on and why? The results of the 15 companies surveyed show a variety of projects that facilities have used to reduce pollution, it also shows that cost is a major factor in the unsuccessful projects, and that facilities are actively focused on reducing Air, Land, and Water pollution. While the data shows a variety …

Human Factors, Ergonomics And Industry 4.0 In The Oil & Gas Industry: A Bibliometric Analysis, Francesco Longo, Antonio Padovano, Lucia Gazzaneo, Jessica Frangella, Rafael Diaz

VMASC Publications

Over the last few years, the Human Factors and Ergonomics (HF/E) discipline has significantly benefited from new human-centric engineered digital solutions of the 4.0 industrial age. Technologies are creating new socio-technical interactions between human and machine that minimize the risk of design-induced human errors and have largely contributed to remarkable improvements in terms of process safety, productivity, quality, and workers’ well-being. However, despite the Oil&Gas (O&G) sector is one of the most hazardous environments where human error can have severe consequences, Industry 4.0 aspects are still scarcely integrated with HF/E. This paper calls for a holistic understanding of the changing …

Investigation Of Anaerobic Digestion Of The Aqueous Phase From Hydrothermal Carbonization Of Mixed Municipal Solid Waste, Kameron J. Adams, Ben Stuart, Sandeep Kumar

Civil & Environmental Engineering Faculty Publications

In 2017, the United States Environmental Protection Agency (EPA) reported that Americans generated over 268 million tons of municipal solid waste (MSW). The majority (52%) of this waste ends up in landfills, which are the third largest source of anthropogenic methane emissions. Improvements in terms of waste management and energy production could be solved by integrating MSW processing with hydrothermal carbonization (HTC) and anaerobic digestion (AD) for converting organic carbon of MSW to fuels. The objectives of this study were to (a) investigate HTC experiments at varying temperatures and residence times (b) evaluate aqueous phase and solids properties, and (c) …

Optimizing The Environmental And Economic Sustainability Of Remote Community Infrastructure, Jamie E. Filer, Justin D. Delorit, Andrew J. Hoisington, Steven J. Schuldt

Faculty Publications

Remote communities such as rural villages, post-disaster housing camps, and military forward operating bases are often located in remote and hostile areas with limited or no access to established infrastructure grids. Operating these communities with conventional assets requires constant resupply, which yields a significant logistical burden, creates negative environmental impacts, and increases costs. For example, a 2000-member isolated village in northern Canada relying on diesel generators required 8.6 million USD of fuel per year and emitted 8500 tons of carbon dioxide. Remote community planners can mitigate these negative impacts by selecting sustainable technologies that minimize resource consumption and emissions. However, …

An Artificial Bee Colony-Based Hybrid Approach For Waste Collection Problem With Midway Disposal Pattern, Qu Wei, Zhaoxia Guo, Hoong Chuin Lau, Zhenggang He

Research Collection School Of Computing and Information Systems

This paper investigates a waste collection problem with the consideration of midway disposal pattern. An artificial bee colony (ABC)-based hybrid approach is developed to handle this problem, in which the hybrid ABC algorithm is proposed to generate the better optimum-seeking performance while a heuristic procedure is proposed to select the disposal trip dynamically and calculate the carbon emissions in waste collection process. The effectiveness of the proposed approach is validated by numerical experiments. Experimental results show that the proposed hybrid approach can solve the investigated problem effectively. The proposed hybrid ABC algorithm exhibits a better optimum-seeking performance than four popular …

36% Reduction In Fuel Resupply Using A Hybrid Generator & Battery System For An Austere Location, David J. Chester [*], Torrey J. Wagner, Douglas S. Dudis

Faculty Publications

The DOD energy policy is to increase energy security resiliency, and mitigate costs in the use and management of energy^[1] Forward operating bases (FOBs) are remote, austere base camps that support an operationally defined mission with a limited or no ability to draw from an energy grid and have historically relied on diesel-powered generators for the primary production of energy.^[2] Generators are sized to meet a theoretical peak demand, but steady state loads are far below this peak, resulting in under-loaded generators.^[3] Under-loaded diesel generators decrease efficiency and increase the need for maintenance, affecting the lifespan of …

Natural Resources Governance Employing Blockchain-Based Decision-Making, Farinaz Sabz Ali Pour, Adrian Gheorghe

Engineering Management & Systems Engineering Faculty Publications

Natural resources are essential structures of socio-economic systems which shape the well-being of humanity, environment, and the economy. Human actions have become the critical responsibility for environmental changes and pressuring many planetary boundaries. Having a systematic approach can provide a governance platform including the inherent characteristics of the resource, the historically established form of use, and transaction costs. A natural resource governance framework is developed by applying Blockchain technology as the primary goal of this study to regulate and manage the extraction and trades. Blockchain technology provides a distributed concurrency monitoring system for sustainable resource management. Persistent and pervasive cooperation …

Cost Benefit Analysis Of Led Vs Florescent Lighting, Kurtis Clark, Phillip Humphrey

Student Research

Over the last few years, the state of Oklahoma has been looking at ways to reduce expenses to address concerns about a budget deficit. There have been efforts made to reduce expenses due to the use of energy. It has been said, when the lights are on, work is getting done. Running lights is therefore the cost of doing business. Our research examines the question, “is there a way to provide better lighting while operating at a lower cost.” This research examines the current lighting at Southwestern State University, primarily fluorescent lighting (FL), and a cost benefit analysis of switching …

Recent Trends In The Frequency And Duration Of Global Floods, Nasser Najibi, Naresh Devineni

Publications and Research

Frequency and duration of floods are analyzed using the global flood database of the Dartmouth Flood Observatory (DFO) to explore evidence of trends during 1985–2015 at global and latitudinal scales. Three classes of flood duration (i.e., short: 1–7, moderate: 8–20, and long: 21 days and above) are also considered for this analysis. The nonparametric Mann–Kendall trend analysis is used to evaluate three hypotheses addressing potential monotonic trends in the frequency of flood, moments of duration, and frequency of specific flood duration types. We also evaluated if trends could be related to large-scale atmospheric teleconnections using a generalized linear model framework. …

A Decision Support Tool For Building Integrated Renewable Energy Microgrids Connected To A Smart Grid, Damilola A. Asaleye, Michael D. Murphy, Michael Breen

Publications

The objective of this study was to create a tool that will enable renewable energy microgrid (REμG) facility users to make informed decisions on the utilization of electrical power output from a building integrated REμG connected to a smart grid. A decision support tool for renewable energy microgrids (DSTREM) capable of predicting photovoltaic array and wind turbine power outputs was developed. The tool simulated users’ daily electricity consumption costs, avoided CO₂ emissions and incurred monetary income relative to the usage of the building integrated REμG connected to the national electricity smart grid. DSTREM forecasted climate variables, which were used …

Mapping And Integrating Value Creation Factors With Life-Cycle Stages For Sustainable Manufacturing, P. Bilge, S. Emec, G. Seliger, Ibrahim S. Jawahir

Institute for Sustainable Manufacturing Faculty Publications

Instead of implementing each element individually, engineers must be aware of multiple interactions among all major value creation factors and their life-cycle stages. Interactions are analyzed by a set of factors and hierarchical levels within a production system based on empirical observations and described in analytical models. Such analyses and missing information about the current condition of the system and its parts remain limited to addressing specific aspects of interactions among factors and stages for multiple decision making. To build a case-based scope addressing the interactions among a set of factors and life-cycle stages, a comprehensive approach for mapping and …

Temporal Variations Of Water Productivity In Irrigated Corn: An Analysis Of Factors Influencing Yield And Water Use Across Central Nebraska, Tony Carr, Haishun Yang, Chittaranjan Ray

Nebraska Water Center: Faculty Publications

Water Productivity (WP) of a crop defines the relationship between the economic or physical yield of the crop and its water use. With this concept it is possible to identify disproportionate water use or water-limited yield gaps and thereby support improvements in agricultural water management. However, too often important qualitative and quantitative environmental factors are not part of aWP analysis and therefore neglect the aspect of maintaining a sustainable agricultural system. In this study, we examine both the physical and economic WP in perspective with temporally changing environmental conditions. The physical WP analysis was performed by comparing simulated maximum attainable …

A Five-Year Performance Review Of Field-Scale, Slow-Release Permanganate Candles With Recommendations For Second-Generation Improvements, Mark Christenson, Ann Kambhu, James Reece, Steve D. Comfort, Laurie Brunner

Nebraska Water Center: Faculty Publications

In 2009, we identified a TCE plume at an abandoned landfill that was located in a low permeable siltyclay aquifer. To treat the TCE, we manufactured slow-release potassium permanganate cylinders (oxidant candles) that had diameters of either 5.1 or 7.6 cm and were 91.4 cm long. In 2010, we compared two methods of candle installation by inserting equal masses of the oxidant candles (7.6-cm vs 5.1-cm dia). The 5.1-cm dia candles were inserted with direct-push rods while the 7.6-cm candles were housed in screens and lowered into 10 permanent wells. Since installation, the 7.6-cm oxidant candles have been refurbished approximately …

Energy Sustainability Of Turkey In The Case Of Lng, Omer Ilker Poyraz, Omer Keskin, Resit Unal

Engineering Management & Systems Engineering Faculty Publications

Energy is both vital and strategic element for a nation to sustain its fundamental activities like security, logistics, heating, etc. Countries sustain their energy demands through internal or external sources. In the case of not being able to maintain energy demands from their internal sources, they would need to import their requirements. Whenever they need to buy raw materials, they have to build terminals to process the raw material into the required form. The dependency on the imports may cause the importing country to weaken its advantage in international conflicts, unemployment, and welfare. Therefore, countries aim to mitigate dependence to …

Learning By Doing - Energy Systems Management, Nima Shahriari, Adrian V. Gheorghe

Engineering Management & Systems Engineering Faculty Publications

Climate change concerns have confronted energy policy makers by unprecedented challenges in the 21st century. Revolution of renewable energy technologies, as well as more efficient energy systems, has been promising in the context of global warming. However, these technologies are not maturing and chaning. Consequently planning for development of these resources requires dealing with various multidisciplinary research questions such as financial feasibility of renewable energy projects. Nevertheless, there is considerable lack of education programs offering multidisciplinary approach for addressing the current energy challenges. Based on the 21st evolving energy landscape, an interdisciplinary graduate certificate course work was designed at Old …

The Green Manufacturing Industrial Consortium’S (Gmic) Approach To Zero-Waste-To-Landfill (Zwtl), Nathan J. Christensen, Marylin Glass-Angeles

Research and Creative Activities Poster Day

Introduction: As organizations continually seek to reduce various forms of waste, some may seek to reduce their landfill impact and improve recycling and material disposal practices. Many organizations interested in reducing their landfill waste have embarked on a zero-waste-to-landfill (ZWTL) journey. This journey involves thoroughly exploring the landfill waste of an organization, reverse tracking the waste to its source, and establishing new practices and procedures for eliminating the source of waste from the landfill stream. The purpose of this poster is to describe the methodology used by the Green Manufacturing Initiative to assist companies on their ZWTL journey.

College Of Engineering Senior Design Competition Spring 2013, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Senior Design Experience

Part of every UNLV engineering student's academic experience, the Senior Design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs and prototypes a product in this required element of the curriculum. Working in teams, the senior design project encourages students to use everything learned in the engineering and computer design programs to create a practical, real world solution to an engineering challenge.

Beyond the classroom ...

Because of the requirement to work in teams, students also build good communication skills, presentation skills and even business writing skills. They also have to …

A Study On Facility Planning Using Discrete Event Simulation: Case Study Of A Grain Delivery Terminal., Sarah M. Asio

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

The application of traditional approaches to the design of efficient facilities can be tedious and time consuming when uncertainty and a number of constraints exist. Queuing models and mathematical programming techniques are not able to capture the complex interaction between resources, the environment and space constraints for dynamic stochastic processes. In the following study discrete event simulation is applied to the facility planning process for a grain delivery terminal. The discrete event simulation approach has been applied to studies such as capacity planning and facility layout for a gasoline station and evaluating the resource requirements for a manufacturing facility. To …

Improving Compressed Air Energy Efficiency In Automotive Plants: Practical Examples And Implementation, Nasr Alkadi, J. Kelly Kissock

Mechanical and Aerospace Engineering Faculty Publications

The automotive industry is the largest industry in the United States in terms of the dollar value of production [1]. U.S. automakers face tremendous pressure from foreign competitors, which have an increasing manufacturing presence in this country. The Big Three North American Original Equipment Manufacturers (OEMs)-General Motors, Ford, and Chrysler-are reacting to declining sales figures and economic strain by working more efficiently and seeking out opportunities to reduce production costs without negatively affecting the production volume or the quality of the product. Successful, cost-effective investment and implementation of the energy efficiency technologies and practices meet the challenge of maintaining the …

Development Of Integrated Process Simulation System Model For Spent Fuel Treatment Facility Design, Yitung Chen, Sean Hsieh

Separations Campaign (TRP)

The major objectives will lead to the creation of a framework that combines all the strengths of AMUSE’s complicated calculations, well-established commercial system process package, and ISOPro’s flexible parameter optimization modules. Development of the process simulation code can be done using the solvent extraction process at Argonne National Laboratory in collaboration with the research team from the Mechanical Engineering Department at UNLV.

Research accomplishments:

• Completed final version of the ISOPro User Manual associated with summarized ISOPro source codes.

• Redesigned and completed use case and design class diagrams (DCD) of the ISOPro package using ArgoUML.

• Improved ISOPro system …

Development Of Integrated Process Simulation System Model For Spent Fuel Treatment Facility (Sftf) Design, Yitung Chen, Sean Hsieh

Separations Campaign (TRP)

The major objectives will lead to a creation of framework that combines all the strengths of AMUSE’s complicated calculations, well-established commercial system process package and ISOPro’s flexible parameter optimization modules. Development of the process simulation code can be done using the solvent extraction process at Argonne National Laboratory in collaboration with the research team from Mechanical Engineering Department at UNLV.

Research accomplishments:

• Integrated the ASPEN-Plus process model with the ISOPro system engineering modeling package, developed by the UNLV team.
• Tested the simplified system process integration using the ISOPro package.
• Generated complete version of the ISOPro package user manual and tutorial. …

Measuring Plant-Wide Energy Savings, J. Kelly Kissock, Carl Eger

Mechanical and Aerospace Engineering Faculty Publications

This paper presents a general method for measuring plant-wide industrial energy savings and demonstrates the method using a case study from an actual industrial energy assessment. The method uses regression models to characterize baseline energy use. It takes into account changes in weather and production, and can use sub-metered data or whole plant utility billing data. In addition to calculating overall savings, the method is also able to disaggregate savings into components, which provides additional insight into the effectiveness of the individual savings measures.

Although the method incorporates search techniques and multi-variable least-squares regression, it is easily implemented using data …

Development Of Integrated Process Simulation System Model For Spent Fuel Treatment Facility (Sftf) Design: Quarterly Progress Report January 1-March 31, 2006, Yitung Chen, Sean Hsieh

Separations Campaign (TRP)

The UNLV developed TRPSEMPro software package can access engineering modeling software, ASPEN Plus through its own interface. The new interface eliminates the user interaction with the complex ASPEN Plus package and also provides input and output results for analysis purpose. The current interface will keep improving on collecting multiple scenario runs and database population.

Two separation processes, acid and plutonium separations, are near completion. The unit operations were finished while some sensitive chemical data for certain species are unknown. Graduate student, Matthew Hodges, continues on finishing those processes using dummy values for those restricted variables. Once the processes complete, researchers …

Development Of Integrated Process Simulation System Model For Spent Fuel Treatment Facility (Sftf) Design, Yitung Chen, Sean Hsieh

Separations Campaign (TRP)

The overall goal of this project is the creation of a framework that combines all the strengths of AMUSE’s complicated calculations, well-established commercial system process packages, and TRPSEMPro’s flexible parameter optimization modules. Development of the process simulation code can be done using the solvent extraction process at Argonne National Laboratory in collaboration with the UNLV Nevada Center for Advanced Computational Methods.

The major objectives are the following:

• Develop a framework for simulating the Spent Fuel Treatment Facility (SFTF) process using AMUSE code, commercial process package, such as ASPEN-PLUS, and system engineering model.
• Develop a middleware package that can communicate between …

Development Of Integrated Process Simulation System Model For Spent Fuel Treatment Facility (Sftf) Design: Quarterly Progress Report January 1-March 31, 2005, Yitung Chen, Sean Hsieh

Separations Campaign (TRP)

The Advanced Fuel Cycle Initiative (AFCI) and Transmutation Research Program-University Participation Program (TRP-UPP) supported by Department of Energy of the United States have been developing many important technologies for the transmutation of nuclear waste to address long-term disposal issues. While successfully embedding AMUSE module into a dedicated System Engineering Model (TRPSEMPro), developed by the Nevada Center for Advanced Computational Methods (NCACM) at the University of Nevada-Las Vegas collaborating with Argonne National Laboratory (ANL), ANL is interested in further simulating the Light Water Reactor (LWR) Spent Fuel Treatment Facility (SFTF) combining commercial process simulation and analysis packages and core calculation of …

Development Of A Systems Engineering Model Of The Chemical Separations Process, Yitung Chen, Darrell Pepper, Sean Hsieh

Separations Campaign (TRP)

The chemical processing of used nuclear fuel is an integral component of any strategy for the transmutation of nuclear waste. Due to the large volume of material that must be handled in this first step of the transmutation process, the efficiency of the separations process is a key factor in the potential economic viability of transmutation strategies. The ability to optimize the chemical separation systems is vital to ensure the feasibility of the transmutation program.

Systems analysis, or total systems modeling, is one of the strongest tools available to researchers for understanding and optimizing complex systems such as chemical separations …

Development Of Integrated Process Simulation System Model For Spent Fuel Treatment Facility (Sftf) Design, Yitung Chen, Sean Hsieh

Separations Campaign (TRP)

The major objective is to create a framework that combines all the strengths of AMUSE’s complicated calculations, well established commercial system process package such as ASPENPLUS, HYSYS and PRO/II and TRPSEMPro’s flexible parameter optimization modules. Development of the process simulation code can be done using the solvent extraction process experience at Argonne National Laboratory and in collaboration with the NCACM.

The major activities of the task are the following:

• Develop a framework for simulating the SFTF process using AMUSE code, commercial process package, such as ASPEN- PLUS, and system engineering model.
• Develop a middleware package that can communicate between the …