Operations Research, Systems Engineering and Industrial Engineering Commons^™

Investigating Potential Improvements To Mbse Software To Support Dodaf, Jennifer Marie Kimpson

Theses and Dissertations

The integration of models created through model-based systems engineering methods with DoDAF is not a new concept. By creating DoDAF-aligned models, DoD program managers are following DoD guidelines to hopefully achieve more effective communication with stakeholders and improve efficiency of their programs. With the use of MBSE tools to create these models, DoD program managers are able to take further advantage of the benefits of MBSE methods. However, even with the use of MBSE tools, there continue to be issues throughout DoD programs. The literature has shown that a continuous improvement approach regarding the use of MBSE tools with DoDAF …

Assessing Adoption Barriers Of Sustainable Packaging In Egypt, Carol Ramses Morgan

Theses and Dissertations

Sustainable packaging has become an essential part of business decisions and corporate directions. With the rise of environmental damages due to improper waste management and unsustainable practices, businesses have a major responsibility to analyze their products’ life cycles and redesign them with sustainability in mind. Applying sustainable packaging could save companies large amounts of resources, therefore cutting costs, while also achieving the legal and social duty as a corporation towards society and the environment. Many developing countries, with specific focus on Egypt, have recently focused on legislative and corporate decisions in order to encourage more sustainable practices. Egypt’s new Waste …

Integrated Computer-Aided Design, Experimentation, And Optimization Approach For Perovskites And Petroleum Packaging Processes, Swapana Subbarao Jerpoth

Theses and Dissertations

According to the World Economic Forum report, the U.S. currently has an energy efficiency of just 30%, thus illustrating the potential scope and need for efficiency enhancement and waste minimization. In the U.S. energy sector, petroleum and solar energy are the two key pillars that have the potential to create research opportunities for transition to a cleaner, greener, and sustainable future. In this research endeavor, the focus is on two pivotal areas: (i) Computer-aided perovskite solar cell synthesis; and (ii) Optimization of flow processes through multiproduct petroleum pipelines. In the area of perovskite synthesis, the emphasis is on the enhancement …

Efficient Connectivity Management And Path Planning For Iot And Uav Networks, Amirahmad Chapnevis

Theses and Dissertations

This dissertation explores how to better manage resources in mobile networks, especially for enhancing the performance of Unmanned Aerial Vehicles (UAV)-supported IoT networks. We explored ways to set up a flexible communication architecture that can handle large IoT deployments by making good use of mobile core network resources like bearers and data paths. We developed strategies that meet the needs of IoT networks and enhance network performance. We also developed and tested a system that combines traffic from several mobile devices that use the same user identity and network resources within the core mobile network. We used everyday smartphones, SIM …

Developing Machine Learning And Time-Series Analysis Methods With Applications In Diverse Fields, Muhammed Aljifri

Theses and Dissertations

This dissertation introduces methodologies that combine machine learning models with time-series analysis to tackle data analysis challenges in varied fields. The first study enhances the traditional cumulative sum control charts with machine learning models to leverage their predictive power for better detection of process shifts, applying this advanced control chart to monitor hospital readmission rates. The second project develops multi-layer models for predicting chemical concentrations from ultraviolet-visible spectroscopy data, specifically addressing the challenge of analyzing chemicals with a wide range of concentrations. The third study presents a new method for detecting multiple changepoints in autocorrelated ordinal time series, using the …

A Systems Approach To Process Design And Sustainability - Synergy Via Pollution Prevention, Control, And Source Reduction, Emmanuel Apau Aboagye

Theses and Dissertations

Historically, process design prioritized efficiency and profitability, often overlooking environmental and societal implications. However, given the global challenges like climate change and resource scarcity, there is a growing emphasis on embedding sustainability into process design. Adopting a systems-oriented approach provides a comprehensive view, spanning from raw material acquisition to end-of-life product management. Such an approach not only identifies potential sustainability challenges but ensures that solutions foster both environmental responsibility and economic viability. In this study, a comprehensive framework for designing industrial systems is introduced, aiming to encompass the entire lifecycle impacts of chemical processes. The research initially delves into two …

An Investigation Into Applications Of Canonical Polyadic Decomposition & Ensemble Learning In Forecasting Thermal Data Streams In Direct Laser Deposition Processes, Jonathan Storey

Theses and Dissertations

Additive manufacturing (AM) is a process of creating objects from 3D model data by adding layers of material. AM technologies present several advantages compared to traditional manufacturing technologies, such as producing less material waste and being capable of producing parts with greater geometric complexity. However, deficiencies in the printing process due to high process uncertainty can affect the microstructural properties of a fabricated part leading to defects. In metal AM, previous studies have linked defects in parts with melt pool temperature fluctuations, with the size of the melt pool and the scan pattern being key factors associated with part defects. …

Simulation Analysis Of The Distrix Protocol For Political Redistricting, Cui Fu

Theses and Dissertations

This thesis explores the process of political redistricting, a crucial component of ensuring fair representation in legislative bodies. The study first outlines the background and criteria of redistricting in the United States, emphasizing important criteria such as equal population, racial fairness, contiguity, and political fairness. It then focuses on the Distrix protocol for political redistricting in which two or more players (i.e., political parties) take turns assigning small pieces of territory to districts until no more unassigned territory remains. The Distrix protocol was recently introduced in a board game of the same name. After describing the Distrix protocol, we present …

Design Space Visualization And Exploration For Many Goal Problems Under Uncertainity, Niharika Balaji

Theses and Dissertations

ABSTRACT

Designing a complex engineered system is challenging due to many conflicting goals, uncertainties, and multiple interactions. Traditional optimization approaches often yield single-point solutions, which may not be suitable for early design stages due to their susceptibility to changes in conditions and uncertainties. To address this challenge, a satisficing approach is employed. This approach enables designers to effectively navigate the design space and identify satisficing solutions that balance conflicting goals in the face of uncertainties and changes in conditions. From a systems design perspective, we view design as an iterative process that involves making informed decisions based on available information …

Task Optimization Utilizing Digital Transformation Concepts - Automation Project Execution Via Agile Methodology, Anthony Steven Maiello

Theses and Dissertations

Task Optimization via the use of automated process improvements is becoming more widespread as more industries lean into the concepts surrounding digital transformation. This shift also necessitates a complementary adaptation in project management methodologies to support the rapid and ever-changing environment, requirements, and innovations. This thesis examines the effectiveness of Agile methodology in managing digital automation projects, with a specific focus placed on process improvements with systems engineering. It accomplished this by contrasting the original model, designed and derived utilizing traditional project management techniques, with the proposed model which is a direct result of the application of Agile project practices. …

Gaze Tracking Embedded Collaborative Robots For Automated Metrology And Reverse Engineering, Sachithra H. Karunathilake

Theses and Dissertations

Conventional geometric metrology, or three-dimensional (3D) scanning, and reverse engineering heavily rely on the experience of the operators. With an increasing need for automation, robot arms have been adopted for this task. However, due to the large variety of parts and designs, automated path planning could provide a scanning solution that may overlook the critical area, which could potentially deteriorate the scan results. This study explores the integration of collaborative robotics (cobots) with eye tracking technology to improve the autonomous 3D scanning process. The primary objective of this study is to enhance the accuracy and efficiency of cobots in …

Ai-Enabled Modeling And Monitoring Of Data-Rich Advanced Manufacturing Systems, Abdullah Al Mamun

Theses and Dissertations

The infrastructure of cyber-physical systems (CPS) is based on a meta-concept of cybermanufacturing systems (CMS) that synchronizes the Industrial Internet of Things (IIoTs), Cloud Computing, Industrial Control Systems (ICSs), and Big Data analytics in manufacturing operations. Artificial Intelligence (AI) can be incorporated to make intelligent decisions in the day-to-day operations of CMS. Cyberattack spaces in AI-based cybermanufacturing operations pose significant challenges, including unauthorized modification of systems, loss of historical data, destructive malware, software malfunctioning, etc. However, a cybersecurity framework can be implemented to prevent unauthorized access, theft, damage, or other harmful attacks on electronic equipment, networks, and sensitive data. The …

Assessing And Predicting The Students’ Systems Thinking Preference: Multi-Criteria Decision Making And Machine Learning, Siham Tazzit

Theses and Dissertations

The 21st century is marked by a technological revolution that features digital implementation and high interconnectivity between systems across different domains, such as transportation, agriculture, education, and health. Although these technological changes resulted in modern systems capable of easing individuals’ lives, these systems are increasingly complex, and that increased complexity is only expected to continue. The increased system complexity is due to the rapid exchange of information between subsystems, which creates high interconnectivity and interdependence between the subsystems and their elements. Workforce skill sets, as a result, must be modified appropriately to ensure the systems’ success. Systems Thinking is an …

Distributionally Robust Unsupervised Domain Adaptation And Its Applications In 2d And 3d Image Analysis, Yibin Wang

Theses and Dissertations

Obtaining ground-truth label information from real-world data along with uncertainty quantification can be challenging or even infeasible. In the absence of labeled data for a certain task, unsupervised domain adaptation (UDA) techniques have shown great accomplishment by learning transferable knowledge from labeled source domain data and adapting it to unlabeled target domain data, yet uncertainties are still a big concern under domain shifts. Distributionally robust learning (DRL) is emerging as a high-potential technique for building reliable learning systems that are robust to distribution shifts. In this research, a distributionally robust unsupervised domain adaptation (DRUDA) method is proposed to enhance the …

Resources Based Planning Framework For Infrastructure Maintenance And Rehabilitation Projects, Heba Gad

Theses and Dissertations

Infrastructure maintenance and rehabilitation projects involve activities scattered over a large geographical area (e.g., scattered road segments maintenance, telecom towers maintenance program, etc.). Planning such projects require a resource-based approach that accounts for the implications of resource mobility between activities’ locations in terms of time & cost. Existing scheduling techniques fall short of addressing the unique challenges of the scattered nature of these projects in combination with organization's limited resources availability. To address this need, this research presents a resources-based planning framework for infrastructure maintenance and rehabilitation scattered projects with the objective of enhancing resources utilization achieving time and cost …

A Generalizable Method And Case Application For Development And Use Of The Aviation Systems – Trust Survey (As-Ts)., Jamison Hicks

Theses and Dissertations

Automated systems are integral in the development of modern aircraft, especially for complex military aircraft. Pilot Trust in Automation (TIA) in these systems is vital for optimizing the pilot-vehicle interface and ensuring pilots use the systems appropriately to complete required tasks.

The objective of this research was to develop and validate a TIA scale and survey methodology to identify and mitigate trust deficiencies with automated systems for use in Army Aviation testing. There is currently no standard TIA assessment methodology for U.S. Army aviation pilots that identifies trust deficiencies and potential mitigations.

A comprehensive literature review was conducted to identify …

Passive Vs. Active Wearable Technology Monitoring Trunk Flexion In Elementary Teachers, Bailey Jose

Theses and Dissertations

The objective of this study was to assess the biomechanical and subjective measures of elementary school teachers while wearing active and/or passive wearable devices during the average workday. Five elementary school teachers wore a harness that held an Upright GO 2 posture tracking device and a Vicon Blue Trident sensor on the participant's upper back for two school days. Haptic feedback was on for one day and off for the other. Data from the Vicon wearable was analyzed to determine participants’ trunk flexion severity, frequency, and duration. Surveys were used to determine perceived exertion and perception of wearable technology. This …

Adaptive Large Neighborhood Search Algorithm – Performance Evaluation Under Parallel Schemes & Applications, Sandip Kumar

Theses and Dissertations

Adaptive Large Neighborhood Search (ALNS) is a fairly recent yet popular single-solution heuristic for solving discrete optimization problems. Even though the heuristic has been a popular choice for researchers in recent times, the parallelization of this algorithm is not widely studied in the literature compared to the other classical metaheuristics. To extend the existing literature, this study proposes several different parallel schemes to parallelize the basic/sequential ALNS algorithm. More specifically, seven different parallel schemes are employed to target different characteristics of the ALNS algorithm and the capability of the local computers. The schemes of this study are implemented in a …

High-Level Requirements For Conceptual Design Of Bridge Deflection Measurement System Using Model-Based Systems Engineering, Mariana Villalabeitia Arenas

Theses and Dissertations

Bridges are essential in the infrastructure transportation system. Repairs and maintenance are the key activities to keep them safe for use. Over the years, the evolution of technology has been applied to improve the way bridges are designed, built, monitored, inspected, and repaired. Nevertheless, there is still a gap between the research efforts and the application of this knowledge in the practical field of bridge inspections. Model-based Systems Engineering is a formalized methodology in the system design that is centered around the model throughout all the life cycle stages of a system, supporting the requirements, design, analysis, verification, and validation …

Modeling The Impact Of Scheduling Risks On Multi-Team Agile Projects, Bria Marie Booth

Theses and Dissertations

Agile project management allows for a quick response to a changing project environment. This opens possible avenues for new opportunities, but also may expose ongoing projects to previously unknown or unexpected threats. Risks must be continuously monitored as a product is worked on to avoid lost potential. This paper will propose a discrete event simulation model that multi-team projects may use to predict the impact to the project’s schedule. Using discrete event simulation early in the project’s planning cycle offers a greater understanding of the possible or probable impact of risks on the schedule. This would help to prepare project …

Geometric Inference In Machine Learning: Applications Of Fisher Information For Model Selection And Other Statistical Applications, Trevor Herntier

Theses and Dissertations

We consider the problem of model selection using the Minimum Description Length (MDL) criterion for distributions with parameters on the hypersphere. Model selection algorithms aim to find a compromise between goodness of fit and model complexity. Variables often considered for complexity penalties involve number of parameters, sample size and shape of the parameter space, with the penalty term often referred to as stochastic complexity. Because Laplace approximation techniques yield inaccurate results for curved spaces, existing criteria incorrectly penalize complexity. We demonstrate how the use of a constrained Laplace approximation on the hypersphere yields a novel complexity measure that more accurately …

Causal Modeling Framework For Nuclear Power Plant Licensing Process, Lauren Kimberly Kiser

Theses and Dissertations

Interests in clean energy revived the nuclear power industry. For the first time in decades, innovative technologies and plant designs are being considered by regulatory agencies. This dissertation explores a Bayesian Network and AHP approach to causal modeling of the Combined License review process for new nuclear power plants (NPP). Historically lengthy and expensive, NPP licensing is critical to ensuring safe operation of the plants. With this comes a high standard for applicants to reach that can result in multiple revision cycles and long review times. New plant designs and fluctuating public support lead to a complex and dynamic series …

Hierarchical Federated Learning On Healthcare Data: An Application To Parkinson's Disease, Brandon J. Harvill

Theses and Dissertations

Federated learning (FL) is a budding machine learning (ML) technique that seeks to keep sensitive data private, while overcoming the difficulties of Big Data. Specifically, FL trains machine learning models over a distributed network of devices, while keeping the data local to each device. We apply FL to a Parkinson’s Disease (PD) telemonitoring dataset where physiological data is gathered from various modalities to determine the PD severity level in patients. We seek to optimally combine the information across multiple modalities to assess the accuracy of our FL approach, and compare to traditional ”centralized” statistical and deep learning models.

Simulation And Analysis Of Dynamic Threat Avoidance Routing In An Anti-Access Area Denial (A2ad) Environment, Dante C. Reid

Theses and Dissertations

This research modeled and analyzed the effectiveness of different routing algorithms for penetration assets in an A2AD environment. AFSIM was used with different configurations of SAMs locations and numbers to compare the performance of AFSIM’s internal zone and shrink algorithm routers with a Dijkstra algorithm router. Route performance was analyzed through computational and operational metrics, including computational complexity, run-time, mission survivability, and simulation duration. This research also analyzed the impact of the penetration asset’s ingress altitude on those factors. Additionally, an excursion was conducted to analyze the Dijkstra algorithm router’s grid density holding altitude constant to understand its impact on …

Validation Of Digital System Models, James R. Winton

Theses and Dissertations

The Department of Defense is undergoing a Digital Transformation driven by Digital Engineering and Model-Based Systems Engineering. Document-based processes are being replaced by digital artifacts, pedigreed data, and an Authoritative Source of Truth for a system across its life cycle. As traditional Design-Build-Test transitions to a Model-Analyze-Build methodology, digital models will proliferate throughout the enterprise and require novel validation processes earlier in the development timeline. A new definition for digital system model validation is proposed to address the identified shortcomings in existing guidance. The proposed validation framework leverages the Systems Modeling Language, use cases, requirements, test cases, and a custom …

Defense Industrial Base Mergers And Acquisitions In The Post-Cold War Era, Corey D. Mack

Theses and Dissertations

The United States Department of Defense (DoD) relies on prime contractors for weapon system development, acquisition, and sustainability, but the increased consolidation of the Defense Industrial Base (DIB) through mergers and acquisitions (M&A) has raised concerns over reduced competition. This research consists of two studies. The first reviews existing literature to identify factors behind the DIB's increased M&A activity since the 1990s, such as DoD budget cuts and market structure. The second study examines the relationship between a prime contractor's financial health and M&A spending, finding a significant relationship between efficiency and M&A spending. Policymakers can use this information to …

A Systems Modeling Approach To Support Human-Agent Team Performance For Combat Identification, Clayton W. Couch

Theses and Dissertations

Combat Identification (CID) in an air-to-air combat context is a highly complex cognitive task that requires the operator to make rapid, high consequence decisions. To accomplish CID, fighter aircrew must attend to and perceive a broad range of information while concurrently building situation awareness (SA) and conducting other tasks. While existing automated agents are available to help fighter aircrew with this CID task, they are designed for a very narrow subset of the overall task and are not well suited for human-agent teaming. An interdependence analysis of the human operator and supporting machine agents conducted for this task support the …

An Analysis On Recommended United States Air Force Additive Manufacturing Construction Unit Type Code Package For Expeditionary Deployment, Caleb G. Dann

Theses and Dissertations

Additive Manufacturing Construction (AMC) is an emerging technology in the construction industry which utilizes 3-D printing to reduce costs, labor requirements and deviations in quality. This technology has the ability to rapidly produce repeatable construction projects while tailoring each to specific requirements through the use of 3-D designs. One of the primary objectives of the 2018 National Defense Strategy (NDS) is to continue meeting mission demands with a greater focus on the efficient use of resources. AMC has the ability to satisfy the requirements of this objective. The United States Air Force has begun initial print trials but have not …

Investigation Of Rhine Pointing As A Solution To The Aircraft Human Machine Interface Problem, Alexandra C. Dobranski, Samuel J. Medvec

Theses and Dissertations

The human machine interface in 5th generation aircraft has not evolved proportionally with advances in display size and data density. The traditional cursor slew method fails to rapidly relocate the cursor, especially on large displays. Previous studies at the Air Force Test Pilot School and Air Force Institute of Technology identified methods that have the potential to improve the human machine interface. This research expanded upon those studies by providing an assessment of head tracking technology as a secondary method of cursor manipulation. Specifically, this study examined the effects that visual feedback (visible and invisible head tracking cursors) and cursor …

Team And Skill Matching For Disaster Recovery Operations, Emily B. Frahm

Theses and Dissertations

United States Air Force (USAF) bases are key power projection platforms that ensure mission readiness and help bring humanitarian aid to locations in need. Recovering airfields after attack or natural disaster is a key mission of USAF civil engineers, and accomplishing this repair as swiftly as possible is key to maintaining our position in the global order. Accomplishing a disaster recovery project is a set of teams, each assigned to a specific task, and made up of a series of personnel. The question answered within this paper is: how do we match the right person with the appropriate skills to …