Operations Research, Systems Engineering and Industrial Engineering Commons^™

Drivers’ Hazard Avoidance During Vehicle Automation: Impact Of Mental Models And Implications For Training, Ganesh Pai Mangalore

Doctoral Dissertations

Advanced Driver Assistance Systems (ADAS) are vehicle automation systems that have become more accessible and prevalent in vehicles in recent years. But the introduction of such technologies introduces new human factors challenges. Past literature suggests that users of vehicle automation lack the necessary and appropriate knowledge about their automation system. This may play a negative role in their hazard avoidance abilities when driving with automation features. Improving mental models and knowledge could generally lead to safer interactions with vehicle automation systems, but any effort to develop hazard avoidance skills when driving with vehicle automation is impeded by the lack of …

Smart Warehousing Implementaion And Education Of Supply Chain Management Leaders, David Quintanilla

Doctoral Dissertations

Paper #1 Overview

Businesses have to adapt to new challenges and technologies in the marketplace which influence warehousing. In order to support this growth, Industry 4.0 technologies have been implemented along the value chain to optimize their organizations and production processes; however, there are still gaps for warehousing research for Industry 4.0. We present four pillars¾location strategy, infrastructure/design, data management, and advanced planning and control¾ as a framework for businesses to use for their adaptation into smart warehousing. In particular, this framework will guide companies in their logistics journey into Industry 4.0. Industry experts and senior logistics professionals were interviewed …

Improving The Health And Safety Of Manufacturing Workers By Detecting And Addressing Personal Protective Equipment (Ppe) Violations In Real-Time With The Use Of Automated Ppe Detection Technology, Joseph Olufemi Fasinu

Graduate Theses, Dissertations, and Problem Reports

The Centers for Disease Control and Prevention (CDC) emphasized that Personal Protective Equipment (PPE) can significantly reduce the risk of occupational injuries and illnesses. However, improper use, failure to use, and other PPE-related violations can still result in injuries and fatalities. Eye and face protection violation has been one of the top 10 most frequently violated OSHA standards in fiscal years 2018, 2019, 2020, 2021 and 2022 consecutively. A common practice among safety professionals to ensure PPE compliance has been to physically inspect or monitor PPE usage among workers, which has been found to be unsustainable on a continuous real-time …

An Exploration Into The Design Of A Portable Music Player For People With Alzheimer’S And Dementia, Jaxon V. Silva

Liberal Arts and Engineering Studies

An exploration into the design of a portable music player for people with Alzheimer's and dementia.

Novel Hitch Cargo Cart, Cesilio Sanchez Ramirez, Lance Haidet, Richard Lontoc, Tyler Selinka

Mechanical Engineering

This document presents the engineering design process used to develop, manufacture, and test a new and improved iteration of a hitch cart prototype. This process was performed by a team of four mechanical engineering seniors as part of California Polytechnic State University, San Luis Obispo’s senior design pathway. The goal of this project was to develop a sturdy and reliable iteration of our sponsor’s hitch cart prototype, that integrated the functionality of a vehicle hitch cargo platform and that of a height adjustable cargo cart into a single streamlined and easy to use product. This design could be used by …

Eagle Medical Tray Denesting & Debris Removal Process, Nicholas Allen Ungefug, Noah Chavez, Susana Shu-Lin Okhuysen, Michael Augustine Pennington

Industrial and Manufacturing Engineering

Eagle Medical Incorporated is a contract medical device packaging and sterilization company. The company purchases thermoformed medical packaging trays, which maintain the sterility of medical devices, from various manufacturers. To ensure packaging quality and to prevent cleanroom contamination, Eagle Medical inspects and sterilizes each blister tray that they order. This process is an essential non-value-added activity that creates a bottleneck. Cleanroom employees must stop packaging medical devices and attend to the processing of blister trays and packaging solutions. The blister trays arrive at Eagle’s facility in nested stacks. Vibration and movement during shipping further compresses the stacks, which makes separation …

Smartphone Control Of Rc Cars, Weston R. Fitzgerald

Electrical Engineering

The smartphone-controlled RC (remote-controlled) car is an inexpensive remote-controlled car designed to be fast and portable. Instead of manufacturing, packaging, and shipping a separate controller, the remote control is implemented in a phone application, which saves time and money in both the design process and the manufacturing process. Utilizing the user’s smartphone is more cost-effective since mobile devices are a common recurrence, and packaging fewer devices results in overall better portability of the product.

This smartphone-controlled car is speedy and intuitive to learn for typical smartphone users. The user can change the car’s speed and direction wirelessly using their phone; …

Improving Young Driver Perceptions Of Vulnerable Road Users Through A Persuasive Intervention, Shashank Mehrotra

Doctoral Dissertations

Vulnerable road users (VRUs), including bicyclists, pedestrians, and road users of other modalities, are at a higher risk of collision with young drivers when a complex traffic situation presents itself. Past research has established the importance of young drivers’ perceptions about VRUs that would encourage safe behavior. This research designed and evaluated a novel persuasive intervention that can help improve the perceptions of young drivers while they interact with VRUs. The study identified young drivers’ perceptions towards VRUs who have been licensed in the past 12 to 18 months through structured interviews. Based on these findings, an interactive intervention was …

Forecasting Nigeria's Electricity Demand And Energy Efficiency Potential Under Climate Uncertainty, Olawale Olabisi

Doctoral Dissertations

The increasing population and socio-economic growth of Nigeria, coupled with the current, unmet electricity demand, requires the need for power supply facilities expansion. Of all Nigeria’s electricity consumption by sector, the residential sector is the largest and growing at a very fast rate. To meet this growing demand, an accurate estimation of the demand into the future that will guide policy makers to adequately plan for the expansion of electricity supply and distribution, and energy efficiency standards and labeling must be made. To achieve this, a residential electricity demand forecast model that can correctly predict future demand and guide the …

Comparing And Improving The Design Of Physical Activity Data Visualizations, Peter M. Frackleton

Masters Theses

Heart disease is a leading cause of death in the United States, and older adults are at highest risk of being diagnosed with heart disease. Consistent physical exercise is an effective means of deterring onset of heart disease, and physical activity tracking devices can inspire greater activity in older adults. However, physical activity tracking device abandonment is quite common due to limitations on what can be learned from the activity data that is collected. Better data visualization of physical data presents an opportunity to surpass these limitations. In this thesis, a task-based human subject study was performed with three different …

Formulación De Un Modelo De Abastecimiento De Medicamentos Sólidos Y Semisólídos En El Departamento Del Vaupés Mediante Técnicas De Ingeniería, Nickolay Weich Moreno, Dayana Caterine Narvaez Gomez

Ingeniería Industrial

Se propone una política para el abastecimiento del hospital de San Antonio de Mitú y sus centros de salud, que permita disminuir los costos totales de compra, donde éste pueda controlar y gestionar el proceso de adquisición e inventario de los medicamentos de alta rotación que se requieran para el período de planeación. La política se diseña a partir de los principios de la gestión de inventario, a través de la planificación y proyección de las variables que puedan involucrarse en el proceso de abastecimiento, basados en los modelos de inventario que se ajusten a las características de los datos …

Versatile Home Workspace Environment, Kayli Holmes

Honors Theses

Since the initial spread of COVID-19, many individuals around the world have experienced a rapid shift from an external workplace, to needing a dedicated workspace within the home. While some individuals have been faced with new distractions like family members and pets, others have been faced with the struggle of having a workspace in common areas, where relaxation and socialization normally occur. Due to the needs for many people to work from home and be isolated from coworkers, it is essential for living spaces to be adaptable to meet these needs. Producing an effective separation can help lead to overall …

Development Of Water Coning Control Design Metrics In Naturally Fractured Reservoirs, Samir Prasun

LSU Doctoral Dissertations

Naturally fractured reservoirs (NFRs) with bottom-water are known for their instant water breakthrough and severe water coning that reduces oil recovery. This is because water channels through the highly permeable fractures easily connecting the well to the aquifer bypassing the oil contained in the matrix. Remedial techniques such as producing below critical-oil rate, optimizing the well spacing and installing the downhole water sink (DWS)/ downhole water loop (DWL) technology, have already been successfully tested in single-porosity reservoirs (SPR). However, applicability of these techniques in NFRs are unknown since only a few studies have been performed on their feasibility in NFRs, …

Product Realization Capstone: Element Proof Safety Steps For Willie Price Lab School, Catherine Thomas, Allan Heuerman, Jared Mumme

Honors Theses

The purpose of this document is to describe the process we took to complete our capstone which paired the Center for Manufacturing Excellence with the Willie Price Lab School. The goal of the capstone was to remake step stools for the students of Willie Price, as the last stools failed to withstand weather damage. However, with the COVID-19 pandemic, plans were hindered, shifting the goal from actually producing the steps to creating instructions so that a younger Center for Manufacturing class could complete the production at a later date. Standardized Work Instructions, a detailed production plan, and engineering drawings were …

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

Performance Study Of Five Different Cabin Air Filters In The Laboratory And On-Road Drive, Fahad Alqahtani

Graduate Theses, Dissertations, and Problem Reports

One of the aims of installing ventilation filters in a car is to prevent vehicle occupants from inhaling potentially harmful aerosols emanating from the environment. Vehicle cabin filters are essential in ensuring that a vehicle's air conditioning system provides clean air to its occupants. The purpose of the cabin filter is to improve air quality inside the car to provide better comfort and better protect occupants from experiencing unwanted respiratory problems. Using cabin filters in air conditioning systems is a common practice in modern vehicle manufacturing. Scientists and engineers are continually seeking new ways of improving the efficiency and effectiveness …

Emergency Department Triage Process Improvement, Tessa Williams

Honors Theses

This senior design project was completed at Ascension Borgess Hospital located in Kalamazoo, Michigan. The mission of Ascension Borgess Hospital is to provide patient centered care. In 2018, 562 patients left the Emergency Department (ED) without being seen, which is a large safety risk for the patients and hospital. Based on this, as well as other obstacles, this project focused on meeting the mission of Ascension Borgess by improving key ED metrics that impact patient centered care. In order to meet that mission, this study aims to improve patient experience, safety and quality of the care provided, profitability for the …

Energy Efficiency Evaluation Of Blower Heater Non-Purge Compressed Air Dryers, Alexandra M. Botts

Graduate Theses, Dissertations, and Problem Reports

There are several compressed air dryers available for industrial use including, refrigerant, desiccant, and membrane. This research focuses on twin tower regenerative closed loop desiccant dryers, specifically: blower heater non-purge (BHNP) with and without cooling water pumps, Compressed-air Heater Purge (CHP), Blower Heater Purge (BHP), and Pressure Swing Heaterless (PSH). These styles of dryers are used mainly in industries that require extremely dry air such as, food manufacturing, medical air, or sensitive technology manufacturers. The research was conducted by collecting and analyzing real time current draw data on air compressors and associated dryers at eight different facilities (13 compressor systems) …

Maximizing Financial Benefit Of Lean Six Sigma Projects Through Optimized Selection Criteria, Colin Wasiloff

Operations Research and Engineering Management Theses and Dissertations

As evolving threats across the globe keep pace with increasing budget constraints, the US Army’s major subordinate commands and their sub-organizations are constantly challenged to do more with less. Resources such as human capital, information technology, facilities, and budgeted funding are stretched as thin as ever, while requirements to serve the Warfighter remain paramount. Each dollar of financial benefit gained through cost reduction efforts at the US Army can affect the Warfighter directly. Budgeted money saved or avoided is reprogrammed both locally and atop the hierarchy at the Department of Treasury to serve the Warfighter better.

Ordinal Logistic Regression was …

Tooling For Injection Molding Using Laser-Powder Bed Fusion., Mohith Ram Buxani

Electronic Theses and Dissertations

Laser-Powder Bed Fusion (L-PBF) has been considered for some time by the injection molding industry for the fabrication of tooling for injection molding in order to address large lead times and costs for tool-making. Computer-aided simulations are also routinely used to evaluate new part and mold designs as well as understanding the effects of material compositions and processing conditions on part quality and overall productivity. However, there remains a significant need to integrate the perspectives from injection molding, 3D printing, metal powders, and component design and process simulation to better utilize LPBF for fabricating tooling required for injection molding. The …

Compressed Air Systems Evaluation And Improvement, Lukas Swoboda

Honors Theses

This project was centered on recommending a new air compressor system for the Fluid System Connectors division of Parker Hannifin in Otsego, Michigan. The recommended compressor for the plant is a 250hp variable speed drive Ingersoll Rand Compressor. It is recommended that this compressor, along with two 35hp compressors already purchased by Parker be tied together using an automated system. In addition to the compressor, a flow controller was recommended to be implemented into the system.

Given that leaks are also a problem in the system, it is recommended that the majority of air leaks in the system be fixed …

Implementación De Un Sistema De Gestión Empresarial Para T.S.M.T. S.A.S, Lady Johanna Perez Vega

Ingeniería en Automatización

El sistema de gestión empresarial para la empresa de Transporte y Comercializadora T.S.M.T. S.A.S. fue diseñado con el objetivo de ofrecer a la empresa, a los clientes y proveedores un mecanismo que les permita generar reportes, consultas impresas o en pantalla, utilización de los datos internos de operaciones de la empresa bajo los parámetros de un sistema de gestión integrado. Para poder obtener la información a procesar, se va a contar con la ayuda de algunas actividades programadas en software, que eventualmente harán parte de una base de datos, donde se contendrán los resultados a evaluar mediante el algoritmo desarrollado. …

High Reliability Organizational Suggestions To Reduce The Risk Of Hospital-Associated Infections, Sandra Catrice Affare

Doctoral Dissertations

Over 1.7 million hospital-associated infections (HAIs), resulting in 99,000 deaths, occur each year in the United States. HAIs are defined as infections that occur within 48 hours of hospital admission without evidence of the infection being present or incubating at the time of admission. HAIs are a major concern to the medical community due to the potential loss of life and high costs. Healthcare providers should be accountable for reducing the rates of HAIs and society needs to hold them accountable for the safe implementation and outcomes of the services they provide.

A high-reliability organization (HRO) is commonly described as …

Development Research And Implications For Cte, Jeff M. Shannon

Morehead State Theses and Dissertations

A capstone submitted in partial fulfillment of the requirements for the degree of Doctor of Education in the College of Education at Morehead State University By Jeff M. Shannon on March 9, 2016.

Developing And Testing An Anguilliform Robot Swimming With Theoretically High Hydrodynamic Efficiency, John B. Potts Iii

University of New Orleans Theses and Dissertations

An anguilliform swimming robot replicating an idealized motion is a complex marine vehicle necessitating both a theoretical and experimental analysis to completely understand its propulsion characteristics. The ideal anguilliform motion within is theorized to produce ``wakeless'' swimming (Vorus, 2011), a reactive swimming technique that produces thrust by accelerations of the added mass in the vicinity of the body. The net circulation for the unsteady motion is theorized to be eliminated.

The robot was designed to replicate the desired, theoretical motion by applying control theory methods. Independent joint control was used due to hardware limitations. The fluid velocity vectors in the …

Developing An Optimal Model For Infant Home Visitation, Isaac Atuahene

Doctoral Dissertations

The United States, Great Britain, Denmark, Canada and many other countries have accepted home visitation (HV) as a promising strategy for interventions for infants after births and for their mothers. Prior HV studies have focused on theoretical foundations, evaluations of programs, cost/benefit analysis and cost estimation by using hospital/payer/insurance data to prove its effectiveness and high cost. As governments and private organizations continue to fund HVs, it is an opportune time to develop and formulate operations research (OR) models of HV coverage, quality and cost so they might be used in program implementation as done for adult home healthcare (HHC) …

Modelling Supercomputer Maintenance Interrupts: Maintenance Policy Recommendations, Jagadish Cherukuri

Masters Theses

A supercomputer is a repairable system with large number of compute nodes interconnected to work in harmony to achieve superior computational performance. Reliability of such a complex system depends on an effective maintenance strategy that involves both emergency and preventive maintenance. This thesis analyzes the maintenance records of four supercomputers operational at The National Institute of Computational Science located at Oak Ridge National Laboratory. We propose to use the generalized proportional intensities model (GPIM) to model the maintenance interrupts as it can capture both the reliability parameters and maintenance parameters and allows the inclusion of both emergency and preventive maintenance. …

Assessment Of Management And Documentation Systems For The Bowling Green State University American Society For Quality Student Branch, Sara Murphy

Master of Education in Instructional Design and Technology Plan II Graduate Projects

The Bowling Green State University (BGSU) American Society for Quality (ASQ) student branch seeks to provide current and prospective students the opportunity to expand or build upon current and evolving quality principles. This project seeks to provide the ASQ student branch the opportunity to develop documented systems of daily operations and other activities in relation to the defined BGSU ASQ student branch organizational objectives. The research associated with this project will provide detailed information related to the organizational requirements to aid in the development of documented systemic procedures. The information also indicates what practices should be in place to ensure …

Automated Image Interpretation For Science Autonomy In Robotic Planetary Exploration, Raymond Francis

Electronic Thesis and Dissertation Repository

Advances in the capabilities of robotic planetary exploration missions have increased the wealth of scientific data they produce, presenting challenges for mission science and operations imposed by the limits of interplanetary radio communications. These data budget pressures can be relieved by increased robotic autonomy, both for onboard operations tasks and for decision- making in response to science data.

This thesis presents new techniques in automated image interpretation for natural scenes of relevance to planetary science and exploration, and elaborates autonomy scenarios under which they could be used to extend the reach and performance of exploration missions on planetary surfaces.

Two …

Modeling Preventive Maintenance In Complex Systems, Jessica Rivas

Open Access Theses

This thesis presents an explicit consideration of the impacts of modeling decisions on the resulting maintenance planning. Incomplete data is common in maintenance planning, but is rarely considered explicitly. Robust optimization aims to minimize the impact of uncertainty--here, in contrast, I show how its impact can be explicitly quantified. Doing so allows decision makers to determine whether it is worthwhile to invest in reducing uncertainty about the system or the effect of maintenance. The thesis consists of two parts. Part I uses a case study to show how incomplete data arises and how the data can be used to derive …