Operations Research, Systems Engineering and Industrial Engineering Commons^™

Process Improvement And Lift Design For The Installation Of A Metrology Machine Assembly, Dalt J. Lasell, James Mitchell O'Meara, Matthew Steensma

Industrial and Manufacturing Engineering

The objective is to work with Onto Innovations, a leading provider of semiconductor metrology and manufacturing solutions, to develop a system that safely installs a 250lb optics plate into the Atlas III: one of their metrology machines. Based in Milpitas, CA, Onto Innovations utilizes a variety of operations to create different products and assembles each product on site. The 250lb optics plates are WIP that are transferred between fixtures and the Atlas III using a combination of lifts and human workers. The WIP have long lead times, high tolerances, and large costs associated with their manufacturing process.

Onto Innovations identified …

Automation Of Data Analysis In Formula 1, Adam Joseph Mourad, Prescott Jeanne Delzell, Patrick Conner Mccabe

Industrial and Manufacturing Engineering

This paper explores economic solutions for Formula 1 racing companies who are interested in data visualization tools. The research was conducted on the current development of data gathering, data visualization, and data interpretation in Formula 1 racing. It was found that a large chunk of racing companies within the league needs an affordable, effective, and automated visualization tool for data interpretation. As data collection in Formula 1 arises, the need for faster and more powerful software increases. Racing companies profit off-brand exposure and the more a racing team wins, the more exposure they receive. The goal of the paper focuses …

Three Essays On Data-Driven Optimization For Scheduling In Manufacturing And Healthcare, Ekin Koker

Doctoral Dissertations

This dissertation consists of three essays on data-driven optimization for scheduling in manufacturing and healthcare. In Chapter 1, we briefly introduce the optimization problems tackled in these essays. The first of these essays deals with machine scheduling problems. In Chapter 2, we compare the effectiveness of direct positional variables against relative positional variables computationally in a variety of machine scheduling problems and we present our results. The second essay deals with a scheduling problem in healthcare: the team primary care practice. In Chapter 3, we build upon the two-stage stochastic integer programming model introduced by Alvarez Oh (2015) to solve …

The Promise Of Vr Headsets: Validation Of A Virtual Reality Headset-Based Driving Simulator For Measuring Drivers’ Hazard Anticipation Performance, Ganesh Pai Mangalore

Masters Theses

The objective of the current study is to evaluate the use of virtual reality (VR) headsets to measure driving performance. This is desirable because they are several orders of magnitude less expensive and, if validated, could greatly extend the powers of simulation. Out of several possible measures of performance that could be considered for evaluating VR headsets, the current study specifically examines drivers’ latent hazard anticipation behavior both because it has been linked to crashes and because it has been shown to be significantly poorer in young drivers compared to their experienced counterparts in traditional driving simulators and in open …

Topology Network Optimization Of Facility Planning And Design Problems, Ravi Ratan Raj Monga

Masters Theses

The research attempts to provide a graphical theory-based approach to solve the facility layout problem. Which has generally been approached using Quadratic Assignment Problem (QAP) in the past, an algebraic method. It is a very complex problem and is part of the NP-Hard optimization class, because of the nonlinear quadratic objective function and (0,1) binary variables. The research is divided into three phases which together provide an optimal facility layout, block plan solution consisting of MHS (material handling solution) projected onto the block plan. In phase one, we solve for the position of departments in a facility based on flow …

Advanced Virtual Reality Headset Based Training To Improve Young Drivers’ Latent Hazard Anticipation Ability, Ravi Agrawal

Masters Theses

Driving safety among young novice driver is one of the largest concern in the transportation domain. Many Paper-based or PC- based training program have been developed over the years to train the young novice driver to improve their driving skills (Hazard Anticipation). This training programs does help young novice driver to improve their situational awareness and so the hazard anticipation skills. But, there is one common problem with most of the currently available training programs. They are not very immersive, because such training program mostly provide plain view of the training scenario’s along with some description about the scenario and …

Forecasting The Cost Of Electricity Generated By Offshore Wind Turbines, Timothy Costa

Masters Theses

To impede the progress of climate change, many policy makers are considering avenues to decarbonize electricity production. In addition to decarbonization, policy makers must consider how the cost of electricity will impact various stakeholders, balancing cost and social benefits. Offshore wind farms have the potential to produce affordable, carbon-free electricity, but they are a relatively new technology. The relative juvenescence of offshore wind lends itself to an uncertain future, regarding production costs. In this thesis, we seek to understand cost drivers behind offshore wind electricity by analyzing historic trends in offshore wind levelized cost of electricity (LCOE) through learning curves, …

Cisco Nexus 9200 Robustness Redesign, Colin Berge, Ethan Gold, Cole Christopherson, Rahul Makhijani

Industrial and Manufacturing Engineering

Certain configurations of Cisco's Nexus 9200 product experienced issues with bending during shipping. Two solutions were developed to eliminate this problem: an external brace that could quickly address the problem yet was expensive and unsustainable, and a redesigned chassis, which was more economical but came with a longer time to implement. Real world packaging and shipping conditions were simulated in SolidWorks and Finite Element Analysis was used to model the stresses experienced when the product is dropped. Both designs were found to significantly reduce stress in critical areas, thus reducing the chance of failure and the cost of the problem. …

Redesign Of Cubesat For Beam Charging, Kuba Preis

Industrial and Manufacturing Engineering

This paper is intended to be a study in the applications of the design freedom granted by additive manufacture in the design of a 1U CubeSat frame. The main loads experienced by a CubeSat are structural (during launch) and thermal (solar radiation). Beam charging is an emerging technology which involves charging a CubeSat using a laser beam. In this paper, a CubeSat frame was redesigned to account for the structural loads induced during launch and the thermal loads induced when beam charging. The thermal, weight, design, and structural requirements for a new CubeSat design were derived. The 1U CubeSat frame …

Additive Manufacturing Powder Removal: Viper 2.0, Andrew D. Epperson, Sean Mccracken, Melissa O'Neil, Alex Ward

Mechanical Engineering

This report presents the final design review of this senior project team. The project is being sponsored by Lawrence Livermore National Laboratory, a federal design agency. Lawrence Livermore National Laboratory is interested in improving their metal additive manufacturing process. The goal of this senior project is to improve the efficiency and safety of a method currently being used to remove metal powders for additively manufactured components. A senior project team in 2017-2018 created the Vibration Induced Powder Evacuator and Reclaimer (VIPER), a device that uses a vibration motor to shake a printed part until it is clean from excess powder. …

Human Powered Vehicle Trainer, Nicholas Hung Nguyen, Gregory Reece Bridges, Jacinta Garcia, Mitchell Sidney Smith

Mechanical Engineering

This Final Design Review (FDR) document describes the final design and completed prototype of a Mechanical Engineering senior project team at California Polytechnic State University, San Luis Obispo. The project goal is to create an adjustable human powered vehicle training bike for George Leone that allows a rider to gain confidence with the unique reclined bike geometry ahead of the World Human Powered Speed Challenge at Battle Mountain, Nevada. This document outlines the customer’s needs and technical research performed which together determine the project’s scope and engineering specifications. Next, we present the initial idea generation process and its results, along …

Fault Adaptive Workload Allocation For Complex Manufacturing Systems, Charlie B. Destefano

Graduate Theses and Dissertations

This research proposes novel fault adaptive workload allocation (FAWA) strategies for the health management of complex manufacturing systems. The primary goal of these strategies is to minimize maintenance costs and maximize production by strategically controlling when and where failures occur through condition-based workload allocation.

For complex systems that are capable of performing tasks a variety of different ways, such as an industrial robot arm that can move between locations using different joint angle configurations and path trajectories, each option, i.e. mission plan, will result in different degradation rates and life-expectancies. Consequently, this can make it difficult to predict when a …

Modeling Of Complex Parts For Industrial Waterjet Cleaning, Braden James

Graduate Theses and Dissertations

Industrial high-pressure waterjet cleaning is common to many industries. The modeling in this paper functions inside a collaborative robotic framework for high mix, low volume processes where human robot collaboration is beneficial. Automation of pressure washing is desirable for economic and ergonomic reasons. An automated cleaning system needs path simulation and analysis to give the operator insight into the predicted cleaning performance of the system. In this paper, ablation, the removal of a substrate coating by waterjet, is modeled for robotic cleaning operations. The model is designed to work with complex parts often found in spray cleaning operations, namely parts …

Fracture Toughness And Fatigue Crack Growth Rate Characterization Of Inconel 718 Formed By Laser Powder Bed Fusion, Charles C. Hohnbaum

Theses and Dissertations

Continuing improvement in the field of AM of metals provides the opportunity for direct fabrication of aerospace parts. AM was once used in large part for rapid prototyping but improvements in technology and increases in the knowledge base of AM materials has provided the opportunity for manufacture of AM parts for operational use. The ability to create low numbers of unique parts without having to invest in expensive tooling provides great economic incentive to utilize this technique. IN718 is the most common high temperature alloy used in the aerospace industry and lends itself readily to formation by LPBF. The superior …

Investigation Of Chip-Form And Tool-Wear In Turning Of Hardened Af9628 Alloy Under Various Cooling And Lubrication Conditions, Jason Wolf

Theses and Dissertations--Manufacturing Systems Engineering

Next generation defense and commercial applications for structural steels require new alloys that eliminate or reduce critical elements from their composition to lower cost and improve manufacturability, while maintaining or exceeding high strength and toughness requirements. A new alloy, denoted as AF9628, has recently been developed for this purpose and its manufacturing characteristics and the material response in component manufacturing must be fully understood.

In the present study, hardened AF9628 alloy was turned with a coated carbide cutting tool under fixed cutting speed, feed rate, and depth of cut parameters. This work focuses on chip-form and tool-wear analysis to understand, …

Diseño E Implementación De Un Sistema Embebido Para La Adquisición Y Gestión De Variables Relevantes En Equipos Trifásicos, Jaime Esteban Palomares Murillo

Ingeniería en Automatización

No abstract provided.

Landing-Gear Impact Response: A Non-Linear Finite Element Approach, Tuan H. Tran

UNF Graduate Theses and Dissertations

The primary objective of this research is to formulate a methodology of assessing the maximum impact loading condition that will incur onto an aircraft’s landing gear system via Finite Element Analysis (FEA) and appropriately determining its corresponding structural and impact responses to minimize potential design failures during hard landing (abnormal impact) and shock absorption testing. Both static and dynamic loading condition were closely analyzed, compared, and derived through the Federal Aviation Administration’s (FAA) airworthiness regulations and empirical testing data.

In this research, a nonlinear transient dynamic analysis is developed and established via NASTRAN advanced nonlinear finite element model (FEM) to …

Trade-Off Balancing For Stable And Sustainable Operating Room Scheduling, Amin Abedini

Theses and Dissertations--Mechanical Engineering

The implementation of the mandatory alternative payment model (APM) guarantees savings for Medicare regardless of participant hospitals ability for reducing spending that shifts the cost minimization burden from insurers onto the hospital administrators. Surgical interventions account for more than 30% and 40% of hospitals total cost and total revenue, respectively, with a cost structure consisting of nearly 56% direct cost, thus, large cost reduction is possible through efficient operation management. However, optimizing operating rooms (ORs) schedules is extraordinarily challenging due to the complexities involved in the process. We present new algorithms and managerial guidelines to address the problem of OR …

An Analysis Of Resistance Spot Weld Quality Based On Acoustic And Electrical Signatures, Ivan Charles Butler

Theses and Dissertations--Manufacturing Systems Engineering

The union of a set of materials by way of Resistance Spot Welding is designed so that once fused together, a substantial amount of intentional, external force must be applied to separate the contents. Therefore, Resistance Spot Welding is often the preferred fusion method in high-volume manufacturing processes. The result of Resistance Spot Welding however is the formation of a weld nugget which is not visible to the naked eye. Destructive and/or ultrasonic methods applied off-line must be used to determine the quality of each weld; both inefficient and expensive processes. The following research analyzes the data fed back during …

Implementation And Analysis Of True Lean In A Startup Company By Using Pdca Model, A Case Study In A Manufacturing Venture, Ankit Jangid

Theses and Dissertations--Manufacturing Systems Engineering

The purpose of this research is to implement and analyze the true lean transformation in a manufacturing start-up organization. Often, lean transformations are observed in developed manufacturing organizations having sophisticated production lines and numerous employees, where lean tools are utilized to reduce waste while increasing profit. However, this type of transformation is narrowly focused on quantifiable process results and falls short of the ultimate goal, establishing a true lean culture within the organization. As a result, it is recommended that true lean principles, philosophies, culture, operations environment and tools be applied at the very beginning stages of an organization, or …

Literature Survey Of Wet-Waste And Hydrothermal Carbonization System: A Comparative Evaluation, Ramat Olaide Yusuf

Dissertations and Theses

This thesis describes the process of Hydrothermal carbonization and a comparative assessment on recent work done on the process using different feedstocks such as Raw Apple (RA), Apple chip pomace (ACP), apple juice pomace (AJP), grape pomace (GP), macadamia nut-shell (MNS), Sewage Sludge (SS), Poultry Litter (PL) and Grape Marc (GM). The data obtained from the literature survey was compared with the data obtained by the CCL team on the SWPS gasifier (HTC of poultry litter) to obtain how carbon conversion efficiency, syngas composition, thermal efficiency, char production rate, gas production rate and energy utilization vary with carbonization process conditions, …

Remotely Controlled Industrial Robotic Arm And Simulation Of Automated Thermal Furnace, Prince Mehandi Ratta

Dissertations, Master's Theses and Master's Reports

The right execution of controllers ensures the correct analysis of information, generating efficient results and better optimizing the system. In this report, two controllers were designed. Firstly, a remotely controlled robotic arm, since there are no such type commercially available controllers. Moreover, robotic platforms are costly, so students and researchers are often unable to learn the concepts of programming industrial robots. This project makes a non-destructive, remotely-controlled robotic arm to better teach students and researchers about programming and control of robotic arms. Secondly, simulation of an automated thermal furnace for ArcelorMittal on SIMULINK, which is used for the annealing process …

Energy Efficiency Evaluation Of Blower Heater Non-Purge Compressed Air Dryers, Alexandra M. Botts

Graduate Theses, Dissertations, and Problem Reports

There are several compressed air dryers available for industrial use including, refrigerant, desiccant, and membrane. This research focuses on twin tower regenerative closed loop desiccant dryers, specifically: blower heater non-purge (BHNP) with and without cooling water pumps, Compressed-air Heater Purge (CHP), Blower Heater Purge (BHP), and Pressure Swing Heaterless (PSH). These styles of dryers are used mainly in industries that require extremely dry air such as, food manufacturing, medical air, or sensitive technology manufacturers. The research was conducted by collecting and analyzing real time current draw data on air compressors and associated dryers at eight different facilities (13 compressor systems) …

Managing Variability In Assembly Lines, Sumanth Gokapai

All Graduate Theses, Dissertations, and Other Capstone Projects

Every successful company have a diversified product portfolio based on their customer demand. Though products are branded as different variants, versions etc. most of them are similar products with little variations in their features or functions they perform. With the traditional, product centric approach to handle variation, new techniques like Clone and own were implemented in which engineers pick the most similar one available, copy it, make changes to it and present it as a new variant. Even though this approach employs reuse, but the savings occur once and only once. This project discussed how companies can exploit the commonality …

Space Dynamics Laboratory Payload Challenge: Autonomous Water Sampling Uav, Thomas Wheeler, Zachary Williams, Joseph Stack

Williams Honors College, Honors Research Projects

The following report has been completed over the course of the Fall 2018 and Spring 2019 semesters at The University of Akron by Joseph P. Stack (Aerospace Systems Engineering), Thomas J. Wheeler (Mechanical Engineering) and Zachary M. Williams (Mechanical Engineering). The purpose of this project was to create a payload system for the Akronauts Rocket Design Team to use at the Intercollegiate Rocket Engineering Competition (IREC) Spaceport America Cup. The Competition as a challenge that is sponsored by Space Dynamics Laboratory specifically regarding payload systems. The challenge in very open-ended and allows student to identify their own scientific experiment and …

Freeform Extrusion Fabrication Of Advanced Ceramics And Ceramic-Based Composites, Wenbin Li

Doctoral Dissertations

"Ceramic On-Demand Extrusion (CODE) is a recently developed freeform extrusion fabrication process for producing dense ceramic components from single and multiple constituents. In this process, aqueous paste of ceramic particles with a very low binder content ( < 1 vol%) is extruded through a moving nozzle to print each layer sequentially. Once one layer is printed, it is surrounded by oil to prevent undesirable water evaporation from the perimeters of the part. The oil level is regulated just below the topmost layer of the part being fabricated. Infrared radiation is then applied to uniformly and partially dry the top layer so that the yield stress of the paste increases to avoid part deformation. By repeating the above steps, the part is printed in a layer-wise fashion, followed by post-processing. Paste extrusion precision of different extrusion mechanisms was compared and analyzed, with an auger extruder determined to be the most suitable paste extruder for the CODE system. A novel fabrication system was developed based on a motion gantry, auger extruders, and peripheral devices. Sample specimens were then produced from 3 mol% yttria stabilized zirconia using this fabrication system, and their properties, including density, flexural strength, Young's modulus, Weibull modulus, fracture toughness, and hardness were measured. The results indicated that superior mechanical properties were achieved by the CODE process among all the additive manufacturing processes. Further development was made on the CODE process to fabricate ceramic components that have external/internal features such as overhangs by using fugitive support material. Finally, ceramic composites with functionally graded materials (FGMs) were fabricated by the CODE process using a dynamic mixing device"--Abstract, page iv.

Material Interactions And Self-Assembly In Inkjet Printing, Karam Nashwan Al-Milaji

Theses and Dissertations

Inkjet printing has attracted much attention in recent years as a versatile manufacturing tool, suitable for printing functional materials. This facile, low-cost printing technique with high throughput and accuracy is considered promising for a wide range of applications including but not limited to optical and electronic devices, sensors, solar cells, biochips, and displays. The performance of such functional devices is significantly influenced by the deposit morphology and printing resolution. Therefore, fabrication functional devices with precise footprints by inkjet printing requires deep understanding of ink properties, material interactions, and material self-assembly.

In conventional inkjet printing process, where sessile droplets are directly …