Operations Research, Systems Engineering and Industrial Engineering Commons^™

Analysis And Selection Of New Rental Paintball Masks For Gladiator Paintball Park, Geoff Wakefield

Industrial and Manufacturing Engineering

This project is designed to select new rental paintball masks for Gladiator Paintball Park. The currently used rental masks are worn down and need replacement. Criteria for new rental masks are examined and include customer preferences, owner's constraints, and time studies. Candidate masks were found by asking customers what they like in rental masks, interviewing other paintball field owners, and referring to the online paintball community. Three candidate masks were found, the V-Force Vantage, JT Alpha, and Kingman java paintball masks. These masks were compared to the currently used rental masks, the V-Force Armor. Customers were surveyed to find out …

Acs Custom Creation's New Business And Assembly Operations, Kent Christensen

Industrial and Manufacturing Engineering

ACS Custom Creations had assembly and business operations that wasted time and wasted money. The objective of the project is to improve and implement ACS Custom Creations business and manufacturing operations. The proposed assembly process involves the rearranging of the bottlenecked steps to eliminate constraints. The assembly workstations were also redesigned to reduce cycle time. With the improvement of the new assembly and business operations, ACS is poised to grow into a bigger company. Financial Statements were created to improve visibility of the company’s historical data. These financial statements include an income statement, balance sheet, and a cash flow statement. …

Solder Qwik Pentm, Katherine E. Robbins

Industrial and Manufacturing Engineering

Electronics soldering is a technique used frequently in the manufacturing of Printed

Circuit Boards (PCB) to attach small electronic parts or wires together. Often times

the need to remove a solder joint arises; this is known as desoldering. Solder wick,

fine braided copper wire infused with rosin, is one of the most effective ways to

desolder because it results in the cleanest joints. Currently using solder wick

involves several time consuming and somewhat awkward steps. This report will

cover the process behind designing, manufacturing, and testing a new ergonomic,

dispenser for solder wick that can be used with one hand. …

Leed Certification Workbook For Eco-Charrette Process Improvement At The Boeing Company, Wesley R. Fromm

Industrial and Manufacturing Engineering

Companies across the globe are greening their portfolios. In an effort to define green construction, the United States Green Building Coalition (USGBC) has developed Leadership in Energy and Environmental Design (LEED) Certification. LEED provides a means for measurement and accountability in sustainable design. However, the volume of information to be processed when considering a building's candidacy is daunting. The LEED Certification Workbook for Eco-Charrette Process Improvement at the Boeing Company takes on this task. By utilizing observations from Boeing's Shared Services Group in Seal Beach, California, the designed solution meets the requirements for an effective gathering of stakeholders in the …

Drop Impact Reliability Of Edge-Bonded Lead-Free Chip Scale Packages, Andrew Farris, Jianbiao Pan, Albert Liddicoat, Michael Krist, Nicholas Vickers, Brian J. Toleno, Dan Maslyk, Dongkai Shangguan, Jasbir Bath, Dennis Willie, David A. Geiger

Industrial and Manufacturing Engineering

This paper presents the drop test reliability results for edge-bonded 0.5 mm pitch lead-free chip scale packages (CSPs) on a standard JEDEC drop reliability test board. The test boards were subjected to drop tests at several impact pulses, including a peak acceleration of 900 Gs with a pulse duration of 0.7 ms, a peak acceleration of 1500 Gs with a pulse duration of 0.5 ms, and a peak acceleration of 2900 Gs with a pulse duration of 0.3 ms. A high-speed dynamic resistance measurement system was used to monitor the failure of the solder joints. Two edge-bond materials used in …

Teaming Multi-Level Classes On Industry Projects, Lizabeth Schlemer, Jose Macedo

Industrial and Manufacturing Engineering

For the past few years we experimented with teaming students from a sophomore-level class and a senior-level class to work on industry projects. The classes are “work design” and “facilities design.” Projects are selected to require the application of knowledge from both disciplines. In addition, the projects are selected from small local companies. The intent of this paper is to describe the benefits and difficulties associated with this methodology. While specific classes in this experience are typical of an industrial engineering curriculum, the lessons learned and benefits could translate to other disciplines.

Optimization Of Engineering Tolerance Design Using Revised Loss Functions, Jeh-Nan Pan, Jianbiao Pan

Industrial and Manufacturing Engineering

Engineering tolerance design plays an important role in modern manufacturing. Both symmetric and asymmetric tolerances are common in many manufacturing processes. Recently, various revised loss functions have been proposed for overcoming the drawbacks of Taguchi's loss function. In this article, Kapur's economic tolerance design model is modified and the economic specification limits for both symmetric and asymmetric losses are established. Three different loss functions are compared in the optimal symmetric and asymmetric tolerance design: a revised Taguchi quadratic loss function, an inverted normal loss function and a revised inverted normal loss function. The relationships among the three loss functions and …

A Decision Support System For Capacity Management, Anton Slobodnik

Industrial and Manufacturing Engineering

Every manufacturer faces the challenge of managing production capacity. How effectively a company meets required capacity as compared to competitors will be a determinant of profitability and success.

This paper details the creation of a best of breed software that can act as a decision support system and help planners reschedule work, add shifts and make sure that the master production schedule is feasible before putting it into an MRP system.

As a part of my senior project I’ve created a Rough-Cut Capacity Tool that takes lead time into account and performs basic what if analysis on level loading a …

Optimization Of Lifeguard Towers, Equipment, And Sign Placement With Human Factors Considerations For The Cal Poly Recreation Center Expansion, Brian J. Henrikson

Industrial and Manufacturing Engineering

Cal Poly’s Recreation Center serves many faculty, students and alumni by providing them with a safe and fun environment to work out and swim. An overwhelming majority of students voted for a Recreation Center expansion to handle the increased usage of the Center over the past few years. The focus of this report is the safe and effective operations of the pool deck and the lifeguard staff. Three surveys were created to see what the lifeguard staff, as well as pool users, thought about the current pool deck and what they would like to see in the new pool deck …

Design Of An 8-Channel Data Acquisition System For Measuring Diode Junction Temperature, Jason Maynard

Industrial and Manufacturing Engineering

The solid state lighting industry is striving to expand the use of light emitting diodes (LEDs) in more applications, particularly in high brightness applications. As the power of LEDs increase, heat removal becomes a critical issue. To improve device lifetime, quantum efficiency, and LED colour, the diode p-n junction temperature (Tj) must be kept to a minimum. Measuring this key parameter is difficult or impossible with direct methods, such as thermocouples and infrared cameras, due to the small size of LEDs. Fortunately, junction temperature can be measured indirectly by using a relationship between the diode forward voltage (Vf) and junction …

Finding And Optimising The Key Factors For The Multiple-Response Manufacturing Process, Jeh-Nan Pan, Jianbiao Pan, Chun-Yi Lee

Industrial and Manufacturing Engineering

With the advent of modern technology, manufacturing processes became so sophisticated that a single quality characteristic cannot reflect the true product quality. Thus, it is essential to perform the key factor analysis for the manufacturing process with multiple-input (factors) and multiple-output (responses). In this paper, an integrated approach of using the desirability function in conjunction with the Mahalanobis-Taguchi-Gram Schmit (MTGS) system is proposed in order to find and optimise the key factors for a multiple-response manufacturing process. The aim of using the MTGS method is to standardise and orthogonalise the multiple responses so that the Mahalanobis distance for each run …

Effects Of Reflow Profile And Thermal Conditioning On Intermetallic Compound Thickness For Snagcu Soldered Joints, Jianbiao Pan, Tzu-Chien Chou, Jasbir Bath, Dennis Willie, Brian J. Toleno

Industrial and Manufacturing Engineering

Purpose – The purpose of this paper is to investigate the effects of reflow time, reflow peak temperature, thermal shock and thermal aging on the intermetallic compound (IMC) thickness for Sn3.0Ag0.5Cu (SAC305) soldered joints.
Design/methodology/approach – A four-factor factorial design with three replications is selected in the experiment. The input variables are the peak temperature, the duration of time above solder liquidus temperature (TAL), solder alloy and thermal shock. The peak temperature has three levels, 12, 22 and 32°C above solder liquidus temperatures (or 230, 240 and 250°C for SAC305 and 195, 205, and 215°C for SnPb). The TAL has …

The Effect Of Ultrasonic Frequency On Gold Wire Bondability And Reliability, Jianbiao Pan, Minh-Nhat Le, Cuong Van Pham

Industrial and Manufacturing Engineering

This paper presents a systematic study on the effect of 120 KHz ultrasonic frequency on the bondability and reliability of fine pitch gold wire bonding to pads over an organic substrate with gold metallizations. The study was carried out on a thermosonic ball bonder that is allowed to easily switch between ultrasonic frequencies of 60 KHz and 120 KHz by changing the ultrasonic transducer and the ultrasonic generator. Bonding parameters were optimized through the design of experimental methodology for four different cases: 25.4 mm wire at 60 kHz, 25.4 mm wire at 120 kHz, 17.8 mm wire at 60 kHz, …