Operations Research, Systems Engineering and Industrial Engineering Commons^™

Rattus Norvegicus As A Biological Detector Of Clandestine Remains And The Use Of Ultrasonic Vocalizations As A Locating Mechanism, Gabrielle M. Johnston

Master's Theses

In investigations, locating missing persons and clandestine remains are imperative. One way that first responder and police agencies can search for the remains is by using cadaver dogs as biological detectors. Cadaver dogs are typically used due to their olfactory sensitivity and ability to detect low concentrations of volatile organic compounds produced by biological remains. Cadaver dogs are typically chosen for their stamina, agility, and olfactory sensitivity. However, what is not taken into account often is the size of the animal and the expense of maintaining and training the animal. Cadaver dogs are typically large breeds that cannot fit in …

Trace Dna Detection Using Diamond Dye: A Recovery Technique To Yield More Dna, Leah Davis

Master's Theses

This study aspires to find a new screening approach to trace DNA recovery techniques to yield a higher quantity of trace DNA from larger items of evidence. It takes the path of visualizing trace DNA on items of evidence with potential DNA so analysts can swab a more localized area rather than attempting to recover trace DNA through the general swabbing technique currently used for trace DNA recovery. The first and second parts consisted of observing trace DNA interaction with Diamond Dye on porous and non-porous surfaces.

The third part involved applying the Diamond Dye solution by spraying it onto …

Operational Decision-Making In Healthcare Using Control Charts, Rohan More

Master's Theses

The primary objective of this thesis was to design a framework supplemented with guidelines for the healthcare managers to select an appropriate type of control chart for operational decision-making. A systematic literature review was conducted to gauge the extent to which control charts were being used in a healthcare setting for clinical decision making and operational decision-making purposes. The findings showed that the application of control charts was almost equal for the clinical decision-making sector and the operational decision-making sector. On further analysis, the ability of control charts to function as a standalone tool was affirmed by the vast majority …

Machine Learning Applications To Predict Road Crash And Soccer Game Outcomes, Lu Bai

Master's Theses

Machine learning has become a cutting-edge and widely studied data science field of study in recent years across many industries and disciplines. In this thesis, two problems (1- crash severity prediction, 2- soccer game outcome prediction.) were investigated by using a set of machine learning approaches, namely: Ridge regression, Lasso Regression, Support Vector Machine (SVM), Neural Network (NN), Random Forest (RF).

The first study is focused on investigating the critical factors affecting crash severity on a comprehensive time-series state-wide traffic crash data. The dataset covers crashes occurred in the state of Connecticut between 1995 and 2014. Traffic crashes are an …

Direct Assessment Of Entrepreneurial Minded Learning Through Integrated E-Learning Modules, Aadtiyasinh Rana

Master's Theses

Entrepreneurial Minded Learning (EML) has a significant emphasis in engineering education

today. Several approaches have been used to assess the impact of various EML approaches. Many indirect assessment techniques have been used and a few direct assessment techniques have been developed. The work presented in this thesis investigates the effectiveness of two specific measurement methods to quantify entrepreneurial minded learning in students.

The University of New Haven has adopted the approach of integrating e-learning modules on entrepreneurial topics and related contextual activities into courses as the primary approach of developing an entrepreneurial mindset (EM) in students. This study focuses on …

Benchmarking Oecd Countries’ Sustainable Development Performance: A Goal-Specific Pca Approach, Shyam Lamichhane

Master's Theses

In this thesis, the current status of the Organisation for Economic Co-operation and Development (OECD) countries’ sustainable development performance towards reaching the recently announced 2030 Agenda (17 UN Sustainable Development Goals (SDGs)) was investigated. Over 90 social, economic and environmental sustainability indicators were considered for the performance assessment of OECD countries towards reaching the targeted SDGs. The current weighted averaging approach used in the recent SDG Index and Dashboards Report was used as the benchmark and its limitations were discussed. To overcome the limitations, a novel Goal Specific Principal Component Analysis (GS-PCA) approach was proposed to create composite sustainability index …

Application Of Artificial Neural Networks To Assess Student Happiness, Gokhan Egilmez, Nadiye O. Erdil, Omid Mohammadi Arani, Mana Vahid

Mechanical and Industrial Engineering Faculty Publications

The purpose of this study is to develop an analytical assessment approach to identify the main factors that affect graduate students' happiness level. The two methods, multiple linear regression (MLR) and artificial neural networks (ANN), were employed for analytical modelling. A sample of 118 students at a small non-profit private university constituted the survey pool. Various factors including education, school facilities, health, social activities, and family were taken into consideration as a result of literature review in happiness assessment. A total of 32 inputs and one output variables were identified during survey design phase. The following survey conduction, data collection, …

Global Renewable And Nonrenewable Energy Use Impact Assessment Of U.S. Manufacturing: An Integrated Cradle-To-Gate Lca And Dea Approach, Bahadir Ezici

Master's Theses

In this thesis, U.S. manufacturing industries` global supply chain-linked energy use and economic output are investigated considering a total of 16 renewable and nonrenewable energy carriers. A multiregion input output (MRIO) framework is employed to conduct the global supply chain-linked energy use impact assessment. The study period was between 1995 and 2014 based on data availability. Thus, 20 MRIO models were developed. Each MRIO model consists of the 40 largest economies of the world and the rest of the world (ROW) as the 41st country. Each country’s economy was structured into 35 manufacturing and service industries based on the Worth …

Midpoint And Endpoint Sustainability Assessment Of U.S. And China Manufacturing: A Comparative Mrio+Recipe Analysis, Mustafa Saber

Master's Theses

Manufacturing is among the most important industries for an economy, which creates value-added, fosters innovation, stimulates employment and economic growth. Therefore, manufacturing industries are crucial for a country’s sustainable development not only for economic reasons but also for social (.e.g. employment, tax, etc.) and environmental ones. Thus, manufacturing activities’ contribution to the economy is critically related with environmental and social impacts. Sustainable economic growth is essential and necessary for a country to provide all necessary goods and services to its growing population.

And, this is highly linke with the creation of new jobs and in this context, manufacturing jobs have …

Embedding Sustainability In Lean Six Sigma Efforts, Nadiye O. Erdil, Can B. Aktas, Omid M. Arani

Mechanical and Industrial Engineering Faculty Publications

The emphasis on the concept of sustainability in businesses and operations is growing either due to increasing public interest, regulatory pressures, or corporate social responsibility. However, where and how to integrate sustainability needs further development for broadening its applications. Using Lean and Six Sigma (LSS) principles in sustainability studies is becoming popular in research and practice. The common approach in these studies is to identify a sustainability project followed by current state sustainability performance assessment, and then work towards improving sustainability performance using LSS tools. The goal of this study was to develop a model framework to fully embed sustainability …

Evaluating The Effect Of Shear Stress On Graft-To Zwitterionic Polycarboxybetaine Coating Stability Using A Flow Cell, Andrew Belanger, Andre Decarmine, Shaoyi Jiang, Keith Cook, Kagya Amoako

Mechanical and Industrial Engineering Faculty Publications

The effect of surface coatings on the performance of antifouling activity under flow can be influenced by the flow/coating interactions. This study evaluates the effect of surface coatings on antifouling activity under different flows for the analyses of coating stability. This was done by exposing DOPA-PCB-300/dopamine coated polydimethylsiloxane (PDMS) to physiological shear stresses using a recirculation system which consisted of dual chamber acrylic flow cells, tygon tubing, flow probe and meter, and perfusion pumps. The effect of shear stress induced by phosphate buffered saline flow on coating stability was characterized with differences in fibrinogen adsorption between control (coated PDMS not …

In Vitro Cytocompatibility Of Antibacterial Levels Of Polymer Nitric Oxide Release, Rana Gbyli, Christina Zito, Kagya Amoako

Mechanical and Industrial Engineering Faculty Publications

Although the antibacterial property of nitric oxide (NO) has been well documented in gram positive and gram negative bacteria cultures, its cytotoxic effects are not completely clear. To limit potential in vivo cytotoxicity, our group recently investigated the effects of a range of NO fluxes on S. epidermidis and S. aureus to determine a minimum effective NO level. In this study, we report the antibacterial function of this minimum NO level also on gram negative Pseudomonas aeruginosa as well as its cytocompatibility effects on lung and kidney cells. Standardized bacterial cultures were treated with NO releasing PDMS substrates followed by …

Benchmarking Environmental Efficiency Of Ports Using Data Mining And Rdea: The Case Of A U.S. Container Ports, Yong Shin Park, N. Muhammad Aslaam Mohamed Abdul Ghani, Fesseha Gebremikael, Gokhan Egilmez

Mechanical and Industrial Engineering Faculty Publications

This study provides step-wise benchmarking practices of each port to enhance the environmental performance using a joint application of the data-mining technique referred to as Kohonen’s self-organizing map (KSOM) and recursive data envelopment analysis (RDEA) to address the limitation of the conventional data envelopment analysis. A sample of 20 container ports in the U.S.A. were selected, and data on input variables (number of quay crane, acres, berth and depth) and output variables (number of calls, throughput and deadweight tonnage, and CO2 emissions) are used for data analysis. Among the selected samples, eight container ports are found to be environmentally inefficient. …

Achieving Totally Local Anticoagulation On Blood Contacting Devices, Rana Gbyli, Anna Mercaldi, Harihara Sundaram, Kagya Amoako

Mechanical and Industrial Engineering Faculty Publications

The recent years have witnessed an increased activity in biocompatibility research aimed at limiting biomaterial-induced blood coagulation. From 2008 to 2016, a total of $36,946,764.00 USD was awarded in grants to 213 research proposals and as large as 50.4% ($18,627,854.00) of that award monies were distributed to 101 proposals over the fiscal years of FY14 to FY16 alone. However, the complexity in blood responses to biomaterials, variability in blood function between individuals and animal species, and differences in medical device application and test setting all continue to pose difficulties in making a breakthrough in this field. This review focuses on …

Strategic Level Proton Therapy Patient Admission Planning: A Markov Decision Process Modeling Approach, Shengfan Zhang, Ridvan Gedik, Chase Rainwater

Mechanical and Industrial Engineering Faculty Publications

A relatively new consideration in proton therapy planning is the requirement that the mix of patients treated from different categories satisfy desired mix percentages. Deviations from these percentages and their impacts on operational capabilities are of particular interest to healthcare planners. In this study, we investigate intelligent ways of admitting patients to a proton therapy facility that maximize the total expected number of treatment sessions (fractions) delivered to patients in a planning period with stochastic patient arrivals and penalize the deviation from the patient mix restrictions. We propose a Markov Decision Process (MDP) model that provides very useful insights in …

A Constraint Programming Approach For The Team Orienteering Problem With Time Windows, Ridvan Gedik, Emre Kirac, Ashlea Bennet Milburn, Chase Rainwater

Mechanical and Industrial Engineering Faculty Publications

The team orienteering problem with time windows (TOPTW) is a NP-hard combinatorial optimization problem. It has many real-world applications, for example, routing technicians and disaster relief routing. In the TOPTW, a set of locations is given. For each, the profit, service time and time window are known. A fleet of homogenous vehicles are available for visiting locations and collecting their associated profits. Each vehicle is constrained by a maximum tour duration. The problem is to plan a set of vehicle routes that begin and end at a depot, visit each location no more than once by incorporating time window constraints. …

Carbon Footprint Stock Analysis Of U.S. Manufacturing: A Time Series Input-Output Lca, Gokhan Egilmez, Khurrum Bhutta, Bulent Erenay, Yong Shin Park, Ridvan Gedik

Mechanical and Industrial Engineering Faculty Publications

The purpose of this paper is to provide an input-output life cycle assessment model to estimate the carbon footprint of US manufacturing sectors. To achieve this, the paper sets out the following objectives: develop a time series carbon footprint estimation model for US manufacturing sectors; analyze the annual and cumulative carbon footprint; analyze and identify the most carbon emitting and carbon intensive manufacturing industries in the last four decades; and analyze the supply chains of US manufacturing industries to help identify the most critical carbon emitting industries.

Survey Of Lean Management Practices In Pakistani Industrial Sectors, Khurrum Bhutta, Gokhan Egilmez, Kamran Chatha, Faizul Huq

Mechanical and Industrial Engineering Faculty Publications

This research was undertaken to study the implementation and adoption of Lean management practices across several industrial sectors in Pakistan. A total of 100 companies were surveyed across five industries. The objective was to determine if there was disparity in the implementation of Lean practices and to provide a yardstick to measure that disparity. Furthermore, this study identified Lean management best practices across several industries in Pakistan, thus providing benchmarks for other industrial sectors. The data collected was analysed using various descriptive statistical methods. The results indicated robust adoption and implementation of Lean practices in Pakistani industry, though there were …

From Green Buildings To Green Supply Chains: An Integrated Input Output Life Cycle Assessment And Optimization Framework For Carbon Footprint Reduction Policy Making, N. Muhammad Aslaam, Gokhan Egilmez, Murat Kucukvar, M.Khurrum S. Butta

Mechanical and Industrial Engineering Faculty Publications

Purpose: This paper focuses on tracing GHG emissions across the supply chain industries associated with the U.S. residential, commercial and industrial building stock and provides optimized GHG reduction policy plans for sustainable development.

Design/Methodology/Approach: A two-step hierarchical approach is developed. Firstly, Economic Input Output-based Life Cycle Assessment (EIO-LCA) is utilized to quantify the GHG emissions associated with the U.S. residential, commercial and industrial building stock. Secondly, a mixed integer linear programming (MILP) based optimization framework is developed to identify the optimal GHG emissions’ reduction (%) for each industry across the supply chain network of the U.S. economy.

Findings: The results …

Energy-Climate-Manufacturing Nexus: New Insights From The Regional And Global Supply Chains Of Manufacturing Industries, Murat Kucukvar, Bunyamin Canseva, Gokhan Egilmez, Nuri C. Onat, Hamidreza Samadi

Mechanical and Industrial Engineering Faculty Publications

The main objectives of this research are to improve our understanding of energy-climate-manufacturing nexus within the context of regional and global manufacturing supply chains as well as show the significance of full coverage of entire supply chain tiers in order to prevent significant underestimations, which might lead to invalid policy conclusions. With this motivation, a multi region input–output (MRIO) sustainability assessment model is developed by using the World Input–Output Database, which is a dynamic MRIO framework on the world’s 40 largest economies covering 1440 economic sectors. The method presented in this study is the first environmentally-extended MRIO model that harmonizes …

Environmental Efficiency Assessment Of U.S. Transport Sector: A Slack-Based Data Envelopment Analysis Approach, Yong Shin Park, Siew Hoon Lim, Gokhan Egilmez, Joseph Szmerekovsky

Mechanical and Industrial Engineering Faculty Publications

Sustainable transportation in the U.S. is essential for long-term economic growth and mobility, and environmental preservation. Using a non-radial slack-based measurement data envelopment analysis (SBM-DEA) model and state-level data, this study assesses the environmental efficiency of the transportation sector in the U.S. from years 2004 to 2012. In addition to environmental efficiency, carbon efficiency and potential carbon reduction were estimated for the 50 U.S. states. The findings of this study reveal that U.S. transportation sector was environmentally inefficient; U.S. states had an average transportation environmental efficiency score below 0.64. Therefore the states could substantially reduce carbon emissions to improve the …

A Fuzzy Data Envelopment Analysis Framework For Dealing With Uncertainty Impacts Of Input–Output Life Cycle Assessment Models On Eco-Efficiency Assessment, Gokhan Egilmez, Serkan Gumus, Murat Kucukvar, Omer Tatari

Mechanical and Industrial Engineering Faculty Publications

The uncertainty in the results of input–output-based life cycle assessment models makes the sustainability performance assessment and ranking a challenging task. Therefore, introducing a new approach, fuzzy data envelopment analysis, is critical; since such a method could make it possible to integrate the uncertainty in the results of the life cycle assessment models into the decision-making for sustainability benchmarking and ranking. In this paper, a fuzzy data envelopment analysis model was coupled with an input–output-based life cycle assessment approach to perform the sustainability performance assessment of the 33 food manufacturing sectors in the United States. Seven environmental impact categories were …

A Benders Based Rolling Horizon Algorithm For A Dynamic Facility Location Problem, Mohammad Marufuzzaman, Ridvan Gedik, Mohammad S. Roni

Mechanical and Industrial Engineering Faculty Publications

This study presents a well-known capacitated dynamic facility location problem (DFLP) that satisfies the customer demand at a minimum cost by determining the time period for opening, closing, or retaining an existing facility in a given location. To solve this challenging NP-hard problem, this paper develops a unique hybrid solution algorithm that combines a rolling horizon algorithm with an accelerated Benders decomposition algorithm. Extensive computational experiments are performed on benchmark test instances to evaluate the hybrid algorithm’s efficiency and robustness in solving the DFLP problem. Computational results indicate that the hybrid Benders based rolling horizon algorithm consistently offers high quality …

Preliminary Assessment Of And Lessons Learned In Pitch: An Integrated Approach To Developing Technical Communication Skills In Engineers, Nadiye O. Erdil, Ronald S. Harichandran, Michael A. Collura, Jean Nocito-Gobel, David J. Adams, Amanda Simson

Mechanical and Industrial Engineering Faculty Publications

The Project to Integrate Technical Communication Habits (PITCH) has been implemented across seven engineering and computer science undergraduate programs starting in fall 2012. The overarching goal of PITCH is to develop written, oral and visual communication skills and professional habits in engineering students. PITCH activities begin in the very first semester and are reinforced and extended through all four years of each program. After three years of progressively more extensive development and deployment, a preliminary assessment of student writing over their first three years in programs was performed. In May 2016 the first cohort of students will have completed the …

Socio-Eco-Efficiency Analysis Of Highways: A Data Envelopment Analysis, Omer Tatari, Gokhan Egilmez, Dhruva Kurmapu

Mechanical and Industrial Engineering Faculty Publications

To ensure the large network of highways is performing sustainably, there is a dire need to quantify sustainability for highways. In this paper, data envelopment analysis (DEA) based mathematical model is developed to evaluate sustainability in an attempt to aid these efforts. Sustainability goals pertaining to the three dimensions of sustainability, social, economic and environmental, were utilized. Utilizing the developed model, sustainability scores of thirty highway sections were calculated and ranked accordingly. Percent improvement analysis was carried out to gain more insight. In addition, sensitivity analysis was carried out to understand how different values of input parameters impacted the socio-eco-efficiency …

Analysis Of A Parallel Machine Scheduling Problem With Sequence Dependent Setup Times And Job Availability Intervals, Ridvan Gedik, Chase Rainwater, Heather Nachtmann, Edward A. Pohl

Mechanical and Industrial Engineering Faculty Publications

In this study, we propose constraint programming (CP) model and logic-based Benders algorithms in order to make the best decisions for scheduling non-identical jobs with availability intervals and sequence dependent setup times on unrelated parallel machines in a fixed planning horizon. In this problem, each job has a profit, cost and must be assigned to at most one machine in such a way that total profit is maximized. In addition, the total cost has to be less than or equal to a budget level. Computational tests are performed on a real-life case study prepared in collaboration with the U.S. Army …

Interactive Spatiotemporal Analysis Of Oil Spills Using Comap In North Dakota, Yong Shin Park, Hamad Al-Qublan, Eunsu Lee, Gokhan Egilmez

Mechanical and Industrial Engineering Faculty Publications

The aim of the study is to analyze the oil spill pattern from various types of incidents and contaminants to determine the extent that incident data can be used as a baseline to prevent hazardous material releases and improve response activities at a state level. This study addresses the importance of collecting and sharing oil spill incidents as well as analytics using the data. Temporal, spatial and spatiotemporal analysis techniques are employed for the oil-spill related environmental incidents observed in the state of North Dakota, United States of America, from 2000 to 2014, as a result of the oil boom. …

Life Cycle Assessment And Optimization-Based Decision Analysis Of Construction Waste Recycling For A Leed-Certified University Building, Murat Kucukvar, Gokhan Egilmez, Omer Tatari

Mechanical and Industrial Engineering Faculty Publications

The current waste management literature lacks a comprehensive LCA of the recycling of construction materials that considers both process and supply chain-related impacts as a whole. Furthermore, an optimization-based decision support framework has not been also addressed in any work, which provides a quantifiable understanding about the potential savings and implications associated with recycling of construction materials from a life cycle perspective. The aim of this research is to present a multi-criteria optimization model, which is developed to propose economically-sound and environmentally-benign construction waste management strategies for a LEED-certified university building. First, an economic input-output-based hybrid life cycle assessment model …

Group Scheduling In A Cellular Manufacturing Shop To Minimise Total Tardiness And Nt: A Comparative Genetic Algorithm And Mathematical Modelling Approach, Gokhan Egilmez, Emre M. Mese, Bulent Erenay, Gürsel A. Süer

Mechanical and Industrial Engineering Faculty Publications

In this paper, family and job scheduling in a cellular manufacturing shop is addressed where jobs have individual due dates. The objectives are to minimise total tardiness and the number of tardy jobs. Family splitting among cells is allowed but job splitting is not. Two optimisation methods are employed in order to solve this problem, namely mathematical modelling (MM) and genetic algorithm (GA). The results showed that GA found the optimal solution for most of the problems with high frequency. Furthermore, the proposed GA is efficient compared to the MM especially for larger problems in terms of execution times. Other …

Developing Entrepreneurial Thinking In Engineering Students By Utilizing Integrated Online Modules, Ronald S. Harichandran, Maria-Isabel Carnasciali, Nadiye O. Erdil, Cheryl Q. Li, Jean Nocito-Gobel, Samuel Bogan Daniels

Mechanical and Industrial Engineering Faculty Publications

An approach to develop entrepreneurial thinking skills in engineering students by integrating online modules into existing courses is described. Eighteen online modules covering a variety of topics will be developed. Developers for the modules are selected by reviewing proposals submitted in response to a broadly distributed request for proposals. Developers undergo extensive training before embarking upon module development. Students will complete each standalone module outside of class hours. Instructors who deploy a module in their course will develop contextual course assignments that reinforce concepts covered in the modules. These instructors also undergo training and are assisted by an external consultant. …