Operations Research, Systems Engineering and Industrial Engineering Commons^™

Cost Benefit Analysis Of Led Vs Florescent Lighting, Kurtis Clark, Phillip Humphrey

Student Research

Over the last few years, the state of Oklahoma has been looking at ways to reduce expenses to address concerns about a budget deficit. There have been efforts made to reduce expenses due to the use of energy. It has been said, when the lights are on, work is getting done. Running lights is therefore the cost of doing business. Our research examines the question, “is there a way to provide better lighting while operating at a lower cost.” This research examines the current lighting at Southwestern State University, primarily fluorescent lighting (FL), and a cost benefit analysis of switching …

The Subject Librarian Newsletter, Engineering And Computer Science, Fall 2017, Buenaventura "Ven" Basco

Buenaventura "Ven" Basco

No abstract provided.

Impact Of Communication Latency On The Bus Voltage Of Centrally Controlled Dc Microgrid During Islanding, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

Maintaining a sustainable and reliable source of energy to supply critical loads within a renewable energy based microgrid (MG) during blackouts is directly related to its bus voltage variations. For example, voltage variation might trigger protection devices and disconnect DERs within the MG. Centrally controlled MGs (CCMGs) type is dependent on communication. Therefore, it is very important to analyze the impact of communication networks performance degradation, such as latency, on the bus voltage of CCMGs. This paper investigates the effect of wireless communication technologies latency on the bus voltage and performance of centralized DC MGs. Two mathematical models were developed …

Optimization And Management Techniques For Geo-Distributed Sdn-Enabled Cloud Datacenters' Provisioning, Khaled M. Alhazmi

Electronic Thesis and Dissertation Repository

Cloud computing has become a business reality that impacts technology users around the world. It has become a cornerstone for emerging technologies and an enabler of future Internet services as it provides on-demand IT services delivery via geographically distributed data centers. At the core of cloud computing, virtualization technology has played a crucial role by allowing resource sharing, which in turn allows cloud service providers to offer computing services without discrepancies in platform compatibility.

At the same time, a trend has emerged in which enterprises are adopting a software-based network infrastructure with paradigms, such as software-defined networking, gaining further attention …

Robust Engineering Of Dynamic Structures In Complex Networks, Walter Botongo Bomela

McKelvey School of Engineering Theses & Dissertations

Populations of nearly identical dynamical systems are ubiquitous in natural and engineered systems, in which each unit plays a crucial role in determining the functioning of the ensemble. Robust and optimal control of such large collections of dynamical units remains a grand challenge, especially, when these units interact and form a complex network. Motivated by compelling practical problems in power systems, neural engineering and quantum control, where individual units often have to work in tandem to achieve a desired dynamic behavior, e.g., maintaining synchronization of generators in a power grid or conveying information in a neuronal network; in this dissertation, …

Economic Model Predictive Control Design Via Nonlinear Model Identification, Laura Giuliani, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Increasing pushes toward next-generation/smart manufacturing motivate the development of economic model predictive control (EMPC) designs which can be practically deployed. For EMPC, the constraints, objective function, and accuracy of the state predictions would benefit from process models that describe the process physics. However, obtaining first- principles models of chemical process systems can be time-consuming or challenging such that it is preferable to develop physics-based process models automatically from process operating data. In this work, we take initial steps in this direction by suggesting that because experiments that are used to characterize first-principles models often target specific types of data, an …

Data-Based Nonlinear Model Identification In Economic Model Predictive Control, Laura Giuliani, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Many chemical/petrochemical processes in industry are not completely modeled from a first-principles perspective because of the complexity of the underlying physico-chemical phenomena and the cost of obtaining more accurate, physically relevant models. System identification methods have been utilized successfully for developing empirical, though not necessarily physical, models for advanced model-based control designs such as model predictive control (MPC) for decades. However, a fairly recent development in MPC is economic model predictive control (EMPC), which is an MPC formulated with an economics-based objective function that may operate a process in a dynamic (i.e., off steady-state) fashion, in which case the details …

Farmbot Trackless Redesign, Cole Thomas, Cailey Kamm, Clayton Alderson, Otto Akerstrom

Industrial and Manufacturing Engineering

For this project the team PLANT3D worked along with Rory Aronson and FarmBot to generate a cheaper more user-friendly design for the FarmBot Genesis 1.3. Working with Rory and FarmBot, we as a team generated a list of design requirements and engineering specifications for the project. These requirements centered around creating a more accessible FarmBot model for the average person to be able to purchase and set up with ease. Much of this required taking the existing system and eliminating the most common problem areas. These were the track system, built using 1.5 meter aluminum extrusions and the complex interchangeable …

Applications Of Complex Network Analysis In Electric Power Systems, Mahmoud Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

This paper provides a review of the research conducted on complex network analysis (CNA) in electric power systems. Moreover, a new approach is presented to find optimal locations for microgrids (MGs) in electric distribution systems (EDS) utilizing complex network analysis. The optimal placement in this paper points to the location that will result in enhanced grid resilience, reduced power losses and line loading, better voltage stability, and a supply to critical loads during a blackout. The criteria used to point out the optimal placement of the MGs were predicated on the centrality analysis selected from the complex network theory, the …

Design Of A Distributed Real-Time E-Health Cyber Ecosystem With Collective Actions: Diagnosis, Dynamic Queueing, And Decision Making, Yanlin Zhou

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

In this thesis, we develop a framework for E-health Cyber Ecosystems, and look into different involved actors. The three interested parties in the ecosystem including patients, doctors, and healthcare providers are discussed in 3 different phases. In Phase 1, machine-learning based modeling and simulation analysis is performed to remotely predict a patient's risk level of having heart diseases in real time. In Phase 2, an online dynamic queueing model is devised to pair doctors with patients having high risk levels (diagnosed in Phase 1) to confirm the risk, and provide help. In Phase 3, a decision making paradigm is proposed …

The Eco-Smart Can V2.0, Darack B. Nanto

Appalachian Student Research Forum

I noticed that the workers had the same itinerary when emptying trashcans, meanwhile trashcans needed urgently to be emptied. Traditionally, ETSU maintenance operate on daily routes to pick trash on designated time, regardless the level of the containers. This leads to overflown trashcan in busy areas or during rush hours in certain areas. This overflown trashcan result in an unclean environment for the community and an unpleasant look of our beautiful campus. The time, resources and labor invested in collecting the trash could be saved. Therefore, I decided to use the Internet of Things (IoT) to create a device that …

Implementing A Total Productive Maintenance Approach Into An Improvement At S Company, Xiaomeng Sun

Masters Theses & Specialist Projects

The study improved the overall equipment effectiveness (OEE) of machines and processes through the implementation of a total productive maintenance (TPM) approach at Company S over a three-month period. By comparing the OEE of equipment before and after the implementation of autonomous maintenance, this study concluded that autonomous maintenance improves OEE. The target of this study was one general product line at a polytetrafluoroethylene (PTFE) plant. Due to time limitations, the study only applied autonomous maintenance to operational activities. This research involved machine and processes selection, condition assessment, baseline OEE assessment, operator training, execution of autonomous maintenance, and OEE measurement. …

Collaborative Appearance-Based Place Recognition And Improving Place Recognition Using Detection Of Dynamic Objects, Juan Pablo Munoz

Dissertations, Theses, and Capstone Projects

This dissertation makes contributions to the problem of Long-Term Appearance-Based Place Recognition. We present a framework for place recognition in a collaborative scheme and a method to reduce the impact of dynamic objects on place representations. We demonstrate our findings using a state-of-the-art place recognition approach.

We begin in Part I by describing the general problem of place recognition and its importance in applications where accurate localization is crucial. We discuss feature detection and description and also explain the functioning of several place recognition frameworks.

In Part II, we present a novel framework for collaboration between agents from a pure …

Communication Based Control For Dc Microgrids, Mahmoud S. Saleh, Yusef Esa, Ahmed Mohamed

Publications and Research

Centralized communication-based control is one of the main methods that can be implemented to achieve autonomous advanced energy management capabilities in DC microgrids. However, its major limitation is the fact that communication bandwidth and computation resources are limited in practical applications. This can be often improved by avoiding redundant communications and complex computations. In this paper, an autonomous communication-based hybrid state/event driven control scheme is proposed. This control scheme is hierarchical and heuristic, such that on the primary control level, it encompasses state-driven local controllers, and on the secondary control level, an event-driven MG centralized controller (MGCC) is used. This …

Anomaly Inference Based On Heterogeneous Data Sources In An Electrical Distribution System, Yachen Tang

Dissertations, Master's Theses and Master's Reports

Harnessing the heterogeneous data sets would improve system observability. While the current metering infrastructure in distribution network has been utilized for the operational purpose to tackle abnormal events, such as weather-related disturbance, the new normal we face today can be at a greater magnitude. Strengthening the inter-dependencies as well as incorporating new crowd-sourced information can enhance operational aspects such as system reconfigurability under extreme conditions. Such resilience is crucial to the recovery of any catastrophic events. In this dissertation, it is focused on the anomaly of potential foul play within an electrical distribution system, both primary and secondary networks as …

Pathology-Informed Approach In Vulnerability Assessment Methods, Polinpapilinho F. Katina, Adrian V. Gheorghe, Charles B. Keating

Engineering Management & Systems Engineering Faculty Publications

A system pathology is a circumstance, condition, or pattern that acts to limit system performance, or lessen system viability, such that the likelihood of a system achieving performance expectation is reduced. The idea of pathology has been described in multiple fields, including computer science, organizational studies, policy analysis, system-of-systems engineering, and systems engineering. However, there is scarcity of literature describing relationship between system pathology and vulnerability assessment. The aim of this study lies at the intersection of system pathology and vulnerability assessment in engineered systems. First, authors provide the state of the art review of literature on system pathology. Second, …

Evaluating The Role Of Energy Demand Prediction And Renewable Energy Utilization On Energy Dependency Management: A Generic System Dynamics Model, Emad Rabiei Hosseinabad

Graduate Research Theses & Dissertations

Supplying energy has become one of the biggest concerns of developed countries due to the growing energy needs in the last decades. Security of energy supply has forced countries to rely more on energy imports from external sources, and become energy dependent to a greater extent. Utilizing available renewable energy resources has been characterized as a reliable indicator to mitigate energy dependency in countries as well as securing the supplying of energy-based needs in the future. This research explores the impact of renewable energies as trustful resources in mitigating energy imports form external sources with investigation of its viability with …

Understanding The Impact Of Large-Scale Power Grid Architectures On Performance, Ange-Lionel Toba

Engineering Management & Systems Engineering Theses & Dissertations

Grid balancing is a critical system requirement for the power grid in matching the supply to the demand. This balancing has historically been achieved by conventional power generators. However, the increasing level of renewable penetration has brought more variability and uncertainty to the grid (Ela, Diakov et al. 2013, Bessa, Moreira et al. 2014), which has considerable impacts and implications on power system reliability and efficiency, as well as costs. Energy planners have the task of designing infrastructure power systems to provide electricity to the population, wherever and whenever needed. Deciding of the right grid architecture is no easy task, …