Nuclear Engineering Commons^™

Nuclear Fusion As A Primary Energy Production Method, Joshua Eiswirth

Missouri S&T’s Peer to Peer

In this paper, the possibility of using nuclear fusion as a primary energy producer will be analyzed. A brief overview of nuclear fusion is given as well as the drawbacks of nuclear fusion today. The human species, need to find a more abundant and renewable means to produce energy, because the non-renewable resources relied on today will be completely used up in as little a 100 years. Nuclear fusion, if perfected, offers a reliable and extremely abundant energy source. With commercial nuclear fusion plants more energy would be available than ever before. While no efficient fusion reactor design exists today, …

Cfd Validation And Scaling Of Condensation Heat Transfer, Varun Kalra

Masters Theses

"A CFD study was performed using STAR-CCM+ to validate the software for its competence in the prediction and scaling of condensation heat transfer in the presence of air acting as a non-condensable gas. Three vertical concentric tube heat exchanger geometries with different diameters were studied in the CFD analysis. It was seen that the steam bulk temperatures predicted by STAR-CCM+ closely matched the experimental data. However, the temperatures of outer wall of the steel condenser tubes showed a deviation of 2% to 11% from the experimental values. The error in adiabatic water wall temperatures were found to range from 18% …

Analysis And Implementation Of Accident Tolerant Nuclear Fuels, Benjamin Joseph Prewitt

Masters Theses

"To improve the reliability and robustness of LWR, accident tolerant nuclear fuels and cladding materials are being developed to possibly replace the current UO₂/zirconium system. This research highlights UN and U₃Si₂, two of the most favorable accident tolerant fuels being developed. To evaluate the commercial feasiblilty of these fuels, two areas of research were conducted. Chemical fabrication routes for both fuels were investigated in detail, considering UO₂ and UF₆ as potential starting materials. Potential pathways for industrial scale fabrication using these methods were discussed.

Neutronic performance of 70%UN-30%U₃Si₂ composite …

A Study Of The Potential Applications Of Am241, And Determining The Feasibility Of Using Gamma Spectroscopy For Future Physical Validation, Eric A. Feissle

Masters Theses

“Am241 is typically produced via Pu241 decay in a uranium fueled reactor. Presence of Am241 can be used as the age estimation tool for spent fuel, which is a focus of this thesis along with the interest of the measurement and the ratio of production rates of Am241’s activation products; Americium-242 and its first excited state of Americium-242m. MCNP models of the core and BEGe 3825 detector were built. These models were compared with established and physical measurements of gamma/x-ray standards that were available at the reactor. Thermal fluxes at 200 kW for potential foils centered in the source holder …

Comparison Of ²⁵²Cf Time Correlated Induced Fission With Amli Induced Fission On Fresh Mtr Research Reactor Fuel, Jay Prakash Joshi

Masters Theses

"The effective application of international safeguards to research reactors requires verification of spent fuel as well as fresh fuel. To accomplish this goal various nondestructive and destructive assay techniques have been developed in the US and around the world. The Advanced Experimental Fuel Counter (AEFC) is a nondestructive assay (NDA) system developed at Los Alamos National Laboratory (LANL) combining both neutron and gamma measurement capabilities. Since spent fuel assemblies are stored in water, the system was designed to be watertight to facilitate underwater measurements by inspectors. The AEFC is comprised of six ³He detectors as well as a shielded …

The Viability Of Advantg Deterministic Method For Synthetic Radiography Generation, Andrew Albert Bingham

Masters Theses

"Time sensitive and high resolution image simulations are needed for synthetic radiography generation. The standard stochastic approach requires lengthy run times with poor statistics at higher resolutions. The investigation of the viability of a deterministic approach to synthetic radiography image generation was explored. The aim was to analyze a computational time decrease over the stochastic method. ADVANTG was compared to MCNP in multiple scenarios including a Benchtop CT prototype, to simulate high resolution radiography images. By using ADVANTG deterministic code to simulate radiography images the computational time was found to decrease over 10 times compared to the MCNP stochastic approach"--Abstract, …

Design And Analysis Of A Passive Heat Removal System For A Small Modular Reactor Using Star Ccm+, Raymond Michael Fanning

Masters Theses

"Next generation nuclear power plants, specifically small modular reactor designs, are the best alternative to fossil fuels for power generation due to their power density and low carbon emissions and constant awareness of safety concerns. A promising safety feature of new designs is the removal of heat by passive systems in accident scenarios. The passive systems require no moving parts and no intervention by personnel. These systems must be accurately simulated for better understanding of the heat transport phenomena: natural convection cooling. Due to the fact that most work developing these passive heat removal systems are proprietary information, a passive …

Studies On Neutron Diffraction And X-Ray Radiography For Material Inspection, Fahima Fahmida Islam

Doctoral Dissertations

"Among the different probes to study the structures of the bio and structural materials, X-ray and neutron are widely used because of their distinctive usefulness in investigating different structures. X-ray radiography and neutron diffraction are two widely known non-destructive techniques for material inspection. Here we demonstrate the design of neutron diffractometer with low power source and analyze the digital image produced by the X-ray radiography instead of neutron diffraction because of the availability of the data. Neutron diffraction is a powerful tool for understanding the behavior of crystal structures and phase behaviors of materials. While neutron diffraction capabilities continue to …

Gamma Spectroscopy By Artificial Neural Network Coupled With Mcnp, Huseyin Sahiner

Doctoral Dissertations

"While neutron activation analysis is widely used in many areas, sensitivity of the analysis depends on how the analysis is conducted. Even though the sensitivity of the techniques carries error, compared to chemical analysis, its range is in parts per million or sometimes billion. Due to this sensitivity, the use of neutron activation analysis becomes important when analyzing bio-samples. Artificial neural network is an attractive technique for complex systems. Although there are neural network applications on spectral analysis, training by simulated data to analyze experimental data has not been made. This study offers an improvement on spectral analysis and optimization …

Discrete Ordinates Ct Organ Dose Simulator (Doctors), Edward T. Norris

Doctoral Dissertations

"Computed tomography (CT) has become pervasive in medical diagnostics as improved imaging techniques and processing algorithms provide higher quality information to doctors. However, the exponentially increasing usage of CT has raised concerns regarding long term low-dose radiological risks.

Currently, the dose to patients is computed using Monte Carlo methods and experimental tests. In other areas of radiation transport, deterministic codes have been shown to be much faster than Monte Carlo codes.

Currently, no deterministic methodology exists to automatically generate a spatially distributed dose profile from a CT voxel phantom. This work proposes a new code, Discrete Ordinate CT Organ Dose …