Nuclear Engineering Commons^™

3d Cfd Simulation Of A Bubble Column With Internals: Validation Of Interfacial Forces And Internal Effects For Local Gas Holdup Predictions, Hayder Al-Naseri, Joshua P. Schlegel, Muthanna H. Al-Dahhan

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

CFD Models (Turbulent Models and Interfacial Forces) Incorporated with the Population Balance Model (PBM) Have Been Validated, Azimuthally, with the Gamma-Ray-Computed Tomography (CT) Results to Address the Effect of the Presence of Internals with Different Arrangements and Diameters. the Superficial Gas Velocity Applied Was Varied from 0.05 to 0.45 M/s. the Results Exhibit the Capability to Predict the Hydrodynamics of the Bubble Column, Further Incorporating the Population Balance Model and Promoting the Prediction of Simulation in High Superficial Gas Velocity. the Effect of Internals Revealed that the Gas Holdup Was Significantly Enhanced in the Bubble Column's Wall Region, While the …

A Detailed Hydrodynamic Study Of The Split-Plate Airlift Reactor By Using Non-Invasive Gamma-Ray Techniques, Laith S. Sabri, Abbas J. Sultan, Hasan Shakir Majdi, Shadha K. Jebur, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study focused on detailed investigations of selected local hydrodynamics in split airlift reactor by using an unconventional measurements facility: computed tomography (CT) and radioactive particle tracking (RPT). The local distribution in a cross-sectional manner with its radial's profiles for gas holdup, liquid velocity flow field, shear stresses, and turbulent kinetic energy were studied under various gas velocity 1, 2 and 3 cm/s with various six axial level z = 12, 20, 40, 60, 90 and 112 cm. The distribution in gas-liquid phases in the whole split reactor column, the riser and downcomer sides, including their behavior at the top …

Geant4 Simulation For Radioactive Particle Tracking (Rpt) Technique, Ahmed A. Alghamdi, Thaar M. Aljuwaya, Abdullah S. Alomari, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

In the past two decades, the radioactive particle tracking (RPT) measurement technique has been proven to visualize flow fields of most multiphase flow systems of industrial interest. The accuracy of RPT, and hence the data obtained, depend largely on the calibration process, which stands here as a basis for two subsequent processes: tracking and reconstruction. However, limitations in the RPT calibration process can be found in different experimental constrains and in assumptions made in the classical Monte Carlo approach used to simulate number of counts received by the detectors. Therefore, in this work, we applied a GEANT4-based Monte Carlo code …

Plenum-To-Plenum Heat Transfer Characteristics Under Natural Circulation In A Scaled-Down Prismatic Modular Reactor, Salman Mohammed Alshehri

Doctoral Dissertations

“Gas-cooled reactor (GCR) is being developed under the Next Generation Nuclear Plant Program (NGNP) in nuclear engineering studies. As the world searches for an energy source with high energy density, clean, abundant, and storable nature to avoid global warming issues, GCR seems to be a promising solution, particularly the possibility of producing hydrogen. Studying and developing the safety analysis and GCR technologies are required for the optimum design and safety of GCR system. Multiphase Reactors Engineering and Applications Laboratory (mReal) at Missouri University of Science and Technology (S&T) has developed a natural convection heat transfer test facility with one riser …

Experimental Investigation Of Liquid Contact In The Developing Post-Dryout Chf Flow Boiling Regime Using Surface Mounted Thermistors, Hiralkumar Harshadbhai Patel

Doctoral Dissertations

"Understanding heat transfer in the post-critical heat flux (CHF) flow boiling regime is important for determining the performance of the heat transfer equipment for various industrial applications requiring high heat transfer rates, e.g., heat exchangers, boilers, chemical and nuclear reactors. Liquid can be present in the core of the flow channel in the form of entrained liquid droplets, especially immediately downstream of film dryout. These droplets are suspected to provide an important heat transfer mechanism as they impinge on the heated wall. The objective of the current study is to investigate liquid contact with the heated wall in this flow …

Computational Fluid Dynamics Modeling And Comparison Of Advanced Techniques For Heat Transfer Augmentation For Nuclear Applications, Salman Mohammed Alzahrani

Doctoral Dissertations

“Passive safety is the most important feature of NuScale’s reactor designs. Twist tape is one passive heat enhance heat technique. The present research investigated thermo-hydraulic characteristics of natural and forced convection of water under different configurations of twisted tape inserted in tube as well as NuScale rod bundles for uniform wall heat flux using computational fluid dynamics (CFD) using ANSYS Fluent 18.1. Results for twist tape inserted in tube under natural circulation showed that heat transfer enhanced and pressure drop increased to 28% and 102.8% over the plain tube respectively. Regularly spaced tapes, and different widths of the twisted tapes …

Experimental Investigation On Heat Transfer In A Prismatic Modular Reactor Under Cosine Heat Flux, S. M. Alshehri, I. A. Said, Muthanna H. Al-Dahhan, Shoaib Usman

Chemical and Biochemical Engineering Faculty Research & Creative Works

The current study has investigated natural convection heat during pressurized conduction cooldown (PCC) accident scenario to understand the passive safety features of prismatic modular reactors (PMR) under different intensities of nonuniform center peaking step heat flux distributions (approximating cosine shape) using an advanced fast-response heat transfer technique. A scaled-down PMR module was designed and developed at Missouri S&T by the research team of the Multiphase Reactors Engineering and Applications Laboratory (mReal). The module consists of upper and lower plena connected by heated and cooled channels. Nonuniform heat flux distribution was applied to the heated channel under nonuniform heating center peaking …

Computational Design And Numerical Analyses Of Thermal-Hydraulics In A Pwr-Type Small Modular Nuclear Reactor, Vivek Murlidhar Rao

Doctoral Dissertations

"This dissertation focuses on computational design of a PWR-type small modular nuclear reactor (SMR), and analysis of coolant thermal-hydraulics during steady-state operation. Physical design of the SMR is based on the existing AP-1000 and Small Modular Reactor designs by Westinghouse Nuclear.

The first paper discusses a two-stage simulation of turbulent flow in the lower plenum of the RPV. In the first stage, four time-dependent Reynolds-Averaged Navier-Stokes (RANS) based turbulence models were used to simulate turbulent flow, compare predictions and identify an appropriate turbulence model. In the second stage, the selected turbulence model was once again used to simulate flow on …

The Significance Of Grouping And Missed Bubbles On Interfacial Area Concentration And Void Fraction, Chandller Stephen-Leslie Mills

Doctoral Dissertations

"The two-fluid model is used in nuclear reactor safety codes. Two of the important constitutive relations will be discussed in this study, the interfacial area concentration and void fraction. The Interfacial area concentration is directly affected by the number of bubbles and how these bubbles are categorized into groups. In this study, a new algorithm was implemented to account for trailing bubbles, bubbles with short response times, and the categorization of bubbles based upon diameter for all group 1 bubbles. The optical and conductivity probes were used to determine the void fraction and interfacial area concentration in a bubble column. …

Study Of Heat Transfer Phenomenon During Natural Convection, Muhammad Yousaf

Doctoral Dissertations

"The purpose of the present study was to numerically investigate the effects of the roughness elements on the heat transfer during natural convection. A computational algorithm was developed based on the Lattice Boltzmann method to conduct numerical study in two-dimensional rectangular cavities and Rayleigh-Bénard cell. A single relaxation time Bhatnagar-Gross-Krook model of Lattice Boltzmann method was used to solve the coupled momentum and energy equations in two-dimensional lattices. Computational model was validated against previous benchmark solutions, and a good agreement was found to exist. A Newtonian fluid of Prandtl (Pr) number 1.0 was considered for this numerical study. The range …

X-Ray Digital Industrial Radiography (Dir) For Local Liquid Velocity (Vll) Measurement In Trickle Bed Reactors (Tbrs): Validation Of The Technique, K. A. M. Salleh, M. F. A. Rahman, Hyoung-Koo Lee, Muthanna H. Al-Dahhan

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

Local liquid velocity measurements in Trickle Bed Reactors (TBRs) are one of the essential components in its hydrodynamic studies. These measurements are used to effectively determine a reactor's operating condition. This study was conducted to validate a newly developed technique that combines Digital Industrial Radiography (DIR) with Particle Tracking Velocimetry (PTV) to measure the Local Liquid Velocity (V_LL) inside TBRs. Three millimeter-sized Expanded Polystyrene (EPS) beads were used as packing material. Three validation procedures were designed to test the newly developed technique. All procedures and statistical approaches provided strong evidence that the technique can be used to measure …

2nd Annual Undergraduate Research Conference Abstract Book, University Of Missouri--Rolla

Undergraduate Research Conference at Missouri S&T

No abstract provided.

The Energy Needs Of The Developing Countries, Vaman Rao

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The energy needs of the developing countries are enormous. They will grow with the passage of time as the pace of economic development accelerates and those countries enter the industrial epoch. The sheer physical non-availability of coal and petroleum to most of them makes it obligatory to choose an unconventional resource as an energy-base. The nuclear fission is the only option now available which is feasible, less-expensive and plentiful. Solar and fusion may be the ultimate sources in the steady state, when appropriate technologies are developed.

4th Annual Umr-Dnr Conference On Energy -- Entire Proceedings, University Of Missouri--Rolla

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

No abstract provided.

Front Matter, University Of Missouri--Rolla

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

No abstract provided.

Opening Remarks, Raymond L. Bisplinghoff

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

You are all extended the very warmest welcome to the University of Missouri-Rolla. This four day conference on energy, the second of its kind, is filled with papers and activities that should find some interest for almost everyone involved in energy activities. All of us on this campus want you to have a rewarding four days and to enjoy yourselves as well. It goes without saying that we stand ready to aid you in every way that is possible. I want to commend the organizers, particularly Dr. Derald Morgan, for his hard and dedicated work in putting the conference together.

Energy Conservation In Uniroyal, Inc., John C. Madigan

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

In the last year, rapid developments have led to the establishment of industry conservation goals and monitoring by the Department of Commerce and the Federal Energy Administration via the various industry associations.

Since 1972, Uniroyal has progressed more than half way toward the 1980 goal of 15% established for the rubber and chemical industries. This paper will describe details of the program with emphasis on new input, such as the computerized tracking method now in use.

Plant studies have provided an assessment of "base" loads vs. process loads, important when considering unit energy consumption. These vary, particularly with the climate …

The Energy Conservation Implications Of Master Metering Of Electric Service In Apartments, Gordon Gross

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

A study has been made of the difference in electricity usage between residents of "Electricity included" apartments and those tenants who pay individual "light bills." The factors which influence owners' and builders' choices of metering service are discussed in detail.

Data taken from over 100 apartment buildings or complexes in 10 major U.S. metropolitan areas and from over 50 major electric power companies are used as the basis for the reported results. Contractors estimates of the costs to convert building service from master to individual meter and some bases for these costs are presented.

The energy conservation potential which might …

Energy Conservation Program At Ralston Purina, George A. Bossman

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

While the food industry as a whole uses only about 5 per cent of total manufacturing energy, we at Ralston Purina Company recognize our dependence upon energy and the importance of a strong energy management program. Last year, as part of this program, we established and implemented an energy conservation program designed to identify opportunities for conservation.

The major thrust of this program has been directed at manufacturing facilities where usages can be traced, wastes detected, and appropriate action taken. These are separate from a general overall corporate effort to make employees more energy conscious in every phase of their …

Solar Assisted Power Systems, A. G. Potter

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Except for hydroelectric power, solar electric generation has not been widely used in the past to assist power system generation because of its relatively high cost. This situation has now started to change with the advent of the energy crisis as exemplified by decreasing natural gas supplies and increasing fossil fuel prices. One possible response to this situation which appears to have a relatively good chance for economic success is the utilization of wind and solar thermal energy for space and water heating loads served by natural gas or electric power. Unfortunately, a large portion of the energy collected in …

Wind Energy Concentrators, John L. Loth

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

This paper presents two alternatives to the shrouded propeller wind energy concentrator. Their operation is based on generating a low pressure area, with high local wind velocity, around the windmill rotor.

The two types of wind energy concentrators considered are: (1) the "obstruction type" concentrator where a vertical cylinder or vertical flat surface is used to produce high local velocities around two counter-rotating vertical axis rotors, and (2) the "vortex type" concentrator where a horizontal vortex is generated by a vertical high lift wing of finite span. The high local wind kinetic energy inside the vortex is harnessed by a …

Energy From Agriculture, E. C. Clausen, D. L. Million, Efton Park, J. L. Gaddy

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

During the past few years, the demand for energy and petrochemicals has grown at a pace so rapid that our reserves of fossil fuels, once considered inexhaustible, are now being quickly depleted. To help lessen this impending problem, alternative sources of energy must be rapidly developed.

Of the many new sources of energy being studied, solar energy, undisputedly, is the most inexhaustible. Energy from the sun, incident upon the earth's surface, exceeds by nearly three orders of magnitude the total energy consumption today. Furthermore, it is not subject to nationalistic boundaries and its use would be compatible with our environmental …

Energy Management In The Food Store, Paul Adams

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Food store refrigeration is vital to the food distribution system and consumes much of the energy used in a supermarket. The manufacturers of food store display equipment have worked long and hard to develop new ideas in supermarket energy conservation. Hussmann's studies have uncovered a number of facts invaluable to anyone concerned with energy conservation in the supermarket.

The first fact is to realize that supermarkets are different from any other retail stores. They consume more energy each year per sq. ft. of store - or per customer - or per dollar sales than other retail stores and most commercial …

Osmo - Power. Osmotic Work; Energy Production From Osmosis Of Fresh Water/Sea-Water Systems, H. H. G. Jellinek

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

It is imperative that new and ecologically acceptable energy sources are made available. Solar energy is a source which seems to be inexhaustible and free of pollution hazards. One vast source, which can be considered to be a solar energy source consists of the system fresh water/sea water. Fresh water is continually removed by the hydrological cycle where water evaporates from the ocean due to solar radiation and is eventually precipitated again in the form of fresh water feeding various rivers. Fresh water and ocean (salt) water mix when rivers flow into the oceans. The different chemical potentials are equalized …

Lean Burning Spark-Ignition Engines -- An Overview, J. A. Alic

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Means of improving the thermal efficiency of spark-ignition internal combustion engines through fuel-lean combustion at part-load are discussed. For purposes of comparison and evaluation, lean-burning engines are classified as modified conventional engines, stratified charge engines, and engines using alternative fuels. Particular attention is given to automobile applications because of their importance for conservation of fuels.

Efficiency In The Use Of Energy Has Been Effected Through Industrial Use Of Subsurface Space, Truman Stauffer Sr.

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

Our Nation, with its high standard of living made possible by industrialization, draws heavily on energy producing natural resources. Self reliance mandates the use of every measure of conservation in order to extend the yet finite supply of energy to meet our national needs. Efficiency in the use of energy has been and can increasingly be effected through industrial use of subsurface space. The use of mined rooms for industry and warehousing utilizes the natural stable underground temperature and the low coefficient of heat transfer existing naturally in the lithosperic materials of the subsurface environment. The small amount of energy …

A Vehicle For Improving Energy Management For Business And Industry, Herbert M. Eckerlin, Albert S. Boyers

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

A new technical assistance program focusing on the area of energy management has been developed by North Carolina State University for business and industry. This paper describes the operation of the program and presents some typical recommendations made to industry. The impact of the energy crisis on small industry is discussed and future plans for addressing this problem are presented.

Planned Reduction In Electrical Energy Use In Nashville - Davidson County, Tennessee: A Preliminary Assessment, Barry D. Lichter, William F. Flanagan, Robert S. Goodrich, James K. Sebenius, C. Paul Beach

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

An assessment was carried out of the impacts of the various alternative strategies designed to reduce the rate of electrical energy use in the Nashville-Davidson County area, in the light of a potential crisis in supply. Seven strategies were identified among the major categories of voluntary reduction, price regulation, and mandatory reduction. Thirty-three sub-sectors were identified among residential, commercial and industrial users, and the consequences of imposing the strategies were assessed using a cross-impact matrix. The value of the methodology as an aid to public policy formulation lies in its possible extension to allow direct participation of various affected publics.

Alternative Approaches To Energy Modeling, Alan S. Cohen, Kenneth W. Costello

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The effects of government and private sector energy policies are varied and interrelated. Before implementing research and development programs, new technologies, environmental and price regulations, import quotas, and other energy-related policies, the consequences of these programs must be identified and quantified on a regional basis. To evaluate the regional impacts of energy policies, we need to consider production costs, transportation costs, and the location of reserves, as well as the demands for energy and nonenergy goods. Developing techniques for analyzing these factors was the objective of many previous research efforts. The strengths and weaknesses of the resulting models are discussed …

Ways To Reduce Peak Electrical Demand In South Louisiana, S. J. Gold, M. D. Bakewell, G. E. Guidry, E. F. Lewis, L. J. Naquin, B. P. Whitney

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

This study analyses alternatives for coping with the peak electrical demand of hot summer afternoons. Economic and Political aspects, as well as technical feasibility, are included. It is concluded that South Louisiana may indeed be able to trim peak demand to 5% below what is anticipated by 1980 , thus making one of the coal fired stations scheduled then unnecessary. However, the contingencies (Natural Gas Shortage, Another Oil Embargo) would make a coal-fired station very desirable.