Nuclear Engineering Commons^™

Mcnp6 Computational-Based Sensitivity Propagation Analysis Of Continuous Neutron Cross-Sections Using The Godiva (Hmf-001) And The Godiver (Hmf-004) Benchmark Criticality Study Cases, Lawrence James Lakeotes

UNLV Theses, Dissertations, Professional Papers, and Capstones

There has been a reduction in funding for theoretical and applied research for improving the nation's database of continuous neutron cross-sections at BNL-NNDC. From 1940 through the late 1980s, research and applied development produced volumes of reliable neutron continuous cross-sections for many isotopes. Currently, the cross-section work has been mainly computational. The focus of this research is mainly centered on the requirements for improving thermal cross-sections to support reactor operations and fuel storage. The research efforts will also helpfully aid in the fast fission spectrum in order to support fast reactor designs for improving safety analysis and feedback coefficients.

This …

Design Concepts And Process Analysis For Transmuter Fuel Manufacturing, Georg F. Mauer

Fuels Campaign (TRP)

The safe and effective manufacturing of actinide-bearing fuels for any transmutation strategy requires that the entire manufacturing process be contained within a shielded hot cell environment. To ensure that the fabrication process is feasible, the entire process must be designed for remote operation. The equipment must be reliable enough to perform over several decades, and also easy to maintain or repair remotely. The facility must also be designed to facilitate its own decontamination and decommissioning. In addition to these design factors, the potential viability of any fuel fabrication process will also be impacted by a number of variables, such as …

Design Concepts And Process Analysis For Transmuter Fuel Manufacturing, Georg F. Mauer

Fuels Campaign (TRP)

The safe and effective manufacturing of actinide-bearing fuels for any transmutation strategy requires that the entire manufacturing process be contained within a shielded hot cell environment. To ensure that the fabrication process is feasible, the entire process must be designed for remote operation. The equipment must be reliable enough to perform over several decades, and also easy to maintain or repair remotely. The facility must also be designed to facilitate its own decontamination and decommissioning. In addition to these design factors, the potential viability of any fuel fabrication process will also be impacted by a number of variables, such as …

Design Concepts And Process Analysis For Transmuter Fuel Manufacturing: Quarterly Progress Report #6, Kamalakar Alluri, Georg F. Mauer

Fuels Campaign (TRP)

Project Milestones

• Completed a systematic study seeking to arrive at an optimized plant configuration, using value engineering techniques in January 2006.

• Vision-based robot serving and automated plant safety monitoring is currently in progress.

Design Concepts And Process Analysis For Transmuter Fuel Manufacturing, Georg F. Mauer

Fuels Campaign (TRP)

The safe and effective manufacturing of actinide-bearing fuels for any transmutation strategy requires that the entire manufacturing process be contained within a shielded hot cell environment. To ensure that the fabrication process is feasible, the entire process must be designed for remote operation. The equipment must be reliable enough to perform over several decades, and also easy to maintain or repair remotely. The facility must also be designed to facilitate its own decontamination and decommissioning. In addition to these design factors, the potential viability of any fuel fabrication process will also be impacted by a number of variables, such as …

Design Concepts And Process Analysis For Transmuter Fuel Manufacturing: Quarterly Progress Report #1, Jamil M. Renno, Georg F. Mauer

Fuels Campaign (TRP)

A Hot Cell robotic assembly: Pick and place dynamic simulation, including feedback control with Matlab, was developed for dispersion fuel manufacture.

The deployment of remote manufacturing of transmuter fuel is a necessity for the transmutation applications. In the reporting period, a virtual hot cell for the manufacturing of dispersion fuel was designed using MSC.visualNastran^©, ProEngineer^© and MATLAB^©. Atypical events were successfully simulated. Relevant physical quantities arising during such events were monitored as well.

Design And Evaluation Of Processes For Fuel Fabrication, Georg F. Mauer

Fuels Campaign (TRP)

The goal of this research project was to provide technical support to process designers working on the development of the fuel cycles for transmutation applications. Detailed process models were developed to better define the impact of fuel choice on the transmuter fuel cycle, including relative process losses, waste generation, and plant capital cost. These process models provide insight regarding required plant size and number of plants needed to mesh with the fuel recycling line. They also determine requirements for automation.

Manufacturing models for large-scale production in a hot cell environment were also developed. Combined, these two models allow the assessment …

Design And Evaluation Of Processes For Fuel Fabrication: Quarterly Progress Report #11, Georg F. Mauer

Fuels Campaign (TRP)

The eleventh quarter of the project covered the following:

• Mr. Richard Silva successfully defended his thesis in April 2004 and graduated from the MEG Master’s program.

• Further refinements on Concepts and Methods for Vision-Based Hot Cell Supervision and control, focusing on rule-based object recognition (Ph.D. Graduate Jae-Kyu Lee). Ms. Caroline Wiejak, an exchange student from the ESIEE in Marne-la-Vallee, France is continuing with the image analysis effort. To date, she has transferred Jae-Kyu’s code to Matlab, and is presently expanding its application to more complex 3D shapes.

• Graduate student Jamil Renno refined and detailed his simulations of …

Design And Evaluation Of Processes For Fuel Fabrication: Quarterly Progress Report #10, Georg F. Mauer

Fuels Campaign (TRP)

The tenth quarter of the project covered the following:

• Mr. Richard Silva continued the development of a simulation model with a Waelischmiller hot cell robot, and is close to completing his M.Sc. thesis project. Rich will likely defend his thesis in April 2004.

• A project review meeting with Dr. Mitch Meyer and other ANL scientists was held in December 2003 at ANL West, Idaho Falls, ID. Dr. Meyer described ANL long term research objectives with regard to transmuter fuel manufacturing.

• Further refinements on Concepts and Methods for Vision-Based Hot Cell Supervision and control, focusing on rule-based object …

Design And Evaluation Of Processes For Fuel Fabrication: Quarterly Progress Report #10, Georg F. Mauer

Fuels Campaign (TRP)

The tenth quarter of the project covered the following:

• Mr. Richard Silva continued the development of a simulation model with a Waelischmiller hot cell robot, and is close to completing his M.Sc. thesis project. Rich will likely defend his thesis in April 2004.

• A project review meeting with Dr. Mitch Meyer and other ANL scientists was held in December 2003 at ANL West, Idaho Falls, ID. Dr. Meyer described ANL long term research objectives with regard to transmuter fuel manufacturing.

• Further refinements on Concepts and Methods for Vision-Based Hot Cell Supervision and control, focusing on rule-based object …

Design And Evaluation Of Processes For Fuel Fabrication, Georg F. Mauer

Fuels Campaign (TRP)

The goal of this research project is to provide technical support to process designers working on the development of the fuel cycles for transmutation applications. Detailed process models are developed to better define the impact of fuel choice on the transmuter fuel cycle, including relative process losses, waste generation, and plant capital cost. These process models provide insight regarding required plant size and number of plants needed to mesh with the fuel recycling line. They also determine requirements for automation.

Manufacturing models for large-scale production in a hot cell environment are also developed. Combined, these two models allow the assessment …

Design And Evaluation Of Processes For Fuel Fabrication: Quarterly Progress Report #9, Georg F. Mauer

Fuels Campaign (TRP)

The ninth quarter of the project covered the following:

• Mr. Richard Silva continued the development of a simulation model with a Waelischmiller hot cell robot. Rich will continue to develop detailed 3-D process simulation models as his M.Sc. thesis project.

• A paper on hot cell robotics was presented at the ANS Winter Annual Meeting and published in the ANS 2003 conference proceedings.

• Further advances on Concepts and Methods for Vision-Based Hot Cell Supervision and control, focusing on rule-based object recognition (Ph.D. Student Jae-Kyu Lee)

• Graduate student Jamil Renno created simulations of more complex fuel manufacturing and …

Design And Evaluation Of Processes For Fuel Fabrication: Quarterly Progress Report #8, Georg F. Mauer

Fuels Campaign (TRP)

The eighth quarter of the project covered the following:

· Mr. Richard Silva continued the development of a simulation model with a Waelischmiller hot cell robot. Rich will continue to develop detailed 3-D process simulation models as his M.Sc. thesis project.

· A paper submitted for ANS for the Winter Annual Meeting on hot cell robotics was accepted for presentation and publication.

· Further advances on Concepts and Methods for Vision-Based Hot Cell Supervision and control, focusing on rule-based object recognition (Ph.D. Student Jae-Kyu Lee)

· Undergraduate student Jamil Renno created simulations of fuel pin assembly (robotic insertion of pellets …

Design And Evaluation Of Processes For Fuel Fabrication: Quarterly Progress Report #7, Georg F. Mauer

Fuels Campaign (TRP)

The seventh quarter of the project covered the following:

• Mr. Richard Silva continued the development of a simulation model with a Waelischmiller hot cell robot. Rich will continue to develop detailed 3-D process simulation models as his M.Sc. thesis project.

• Mr. Richard Silva presented a paper on hot cell robotics at the ANS student conference in Berkeley, CA.

• Concepts and Methods for Vision-Based Hot Cell Supervision and control, focusing on rule-based object recognition (Ph.D. Student Jae-Kyu Lee)

• Undergraduate student Jamil Renno, developed better control algorithms, and created simulations of pick and place actions for the hot …

Design And Evaluation Of Processes For Fuel Fabrication: Quarterly Progress Report #6, Georg F. Mauer

Fuels Campaign (TRP)

The sixth quarter of the project covered the following:

• Mr. Richard Silva continued the development of a simulation model with a Waelischmiller hot cell robot. Rich will continue to develop detailed 3-D process simulation models as his M.Sc. thesis project. Rich is employed with Bechtel at the Yucca Mountain project.

• Concepts and Methods for Vision-Based Hot Cell Supervision and control (Ph.D. Student Jae-Kyu Lee )

• An undergraduate senior student in mechanical engineering, Mr. Jamil Renno, was hired to develop the simulation model for the hot cell manipulator.

Design And Evaluation Of Processes For Transmuter Fuel Fabrication, Georg F. Mauer

Fuels Campaign (TRP)

• Project Objective: examine autonomous robotic fuel fabrication processes with regard to hot cell and equipment design, operations, and costs.

• Fabrication processes for different fuel types differ in terms of equipment types, throughput, and cost.

• Design options are restricted by the requirement to employ only radiation-hardened machinery and components

• Benefit to Department of Energy: decision support for the selection of the most suitable manufacturing process.

Design And Evaluation Of Processes For Fuel Fabrication: Quarterly Progress Report #5, Georg F. Mauer

Fuels Campaign (TRP)

The fifth quarter of the project covered the following:

· Literature Search: The process of evaluating the pertinent literature continued.

· Mr. Richard Silva continued the development of a simulation model with a Waelischmiller hot cell robot. Rich will continue to develop detailed 3-D process simulation models as his M.Sc. thesis project.

· Dr. Mauer presented a paper at the ANS Winter annual meeting in Washington, D.C. titled: “Design and Evaluation of Processes for Transmuter Fuel Fabrication.”

· Concepts and Methods for Vision-Based Hot Cell Supervision and control (Ph.D. Student Jae-Kyu Lee )

· Dr. Mauer presented a paper at …

Design And Evaluation Of Processes For Fuel Fabrication: Quarterly Progress Report #4, Georg F. Mauer

Fuels Campaign (TRP)

The fourth quarter of the project covered the following:

• Literature Search: The process of evaluating the pertinent literature continued. Results are summarized.

• Mr. Richard Silva developed a simulation model with a Waelischmiller hot cell robot. Rich will continue to develop detailed 3-D process simulation models as his M.Sc. thesis project.

• Dr. Mauer visited CEA Cadarache and CEA Marcoule in France, the institute for transuranics in Karlsruhe, and the Framatome manufacturing plant in Lingen, Germany.

• Concepts and Methods for Vision-Based Hot Cell Supervision and control (Ph.D. Student Jae-Kyu Lee )

Design And Evaluation Of Processes For Fuel Fabrication: Year 1 Final Report, Georg F. Mauer

Fuels Campaign (TRP)

The project objective is the design and evaluation of manufacturing processes for transmuter fuel fabrication. The large-scale deployment of remote fabrication and refabrication processes will be required for all transmutation scenarios. Current program emphasis is on a five-year effort to determine the feasibility of transmutation as a technology to limit the need for repository storage of spent commercial fuel. The evaluation of the fabrication processes will create a decision support data base to document design, operations, and costs. Fabrication processes required for different fuel types differ in terms of equipment types, throughput, and cost. The year 1 project was focused …

Design And Evaluation Of Processes For Fuel Fabrication: Year 1 Final Report, Georg F. Mauer

Fuels Campaign (TRP)

The project objective is the design and evaluation of manufacturing processes for transmuter fuel fabrication. The large-scale deployment of remote fabrication and refabrication processes will be required for all transmutation scenarios. Current program emphasis is on a five-year effort to determine the feasibility of transmutation as a technology to limit the need for repository storage of spent commercial fuel. The evaluation of the fabrication processes will create a decision support data base to document design, operations, and costs. Fabrication processes required for different fuel types differ in terms of equipment types, throughput, and cost. The year 1 project was focused …

Design And Evaluation Of Processes For Fuel Fabrication, Georg F. Mauer

Fuels Campaign (TRP)

One of the primary concerns in selecting a fuel matrix for actinide-bearing fuels, such as those for transmutation systems, is fuel fabrication. Fuel fabrication technologies for the fabrication and re-fabrication processes must meet several technical considerations, such as minimizing secondary radioactive waste streams, economic viability, reasonable capital outlay, and must be easy to maintain over the transmuter core life cycle. Additionally, the fuel type chosen must be easily manufactured in a remote environment. The volatile behavior of americium during thermal processing further complicates these goals. Currently, the national program is investigating a number of candidate fuel matrices: metallic, ceramic, dispersion, …