Open Access. Powered by Scholars. Published by Universities.®
Nanoscience and Nanotechnology Commons™
Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 24 of 24
Full-Text Articles in Nanoscience and Nanotechnology
Spectrally-Selective All-Inorganic Scattering Luminophores For Solar Energy-Harvesting Clear Glass Windows, Ramzy Alghamedi, Mikhail Vasiliev, Mohammad Alam, Kamal Alameh
Spectrally-Selective All-Inorganic Scattering Luminophores For Solar Energy-Harvesting Clear Glass Windows, Ramzy Alghamedi, Mikhail Vasiliev, Mohammad Alam, Kamal Alameh
Mikhail Vasiliev
All-inorganic visibly-transparent energy-harvesting clear laminated glass windows are the most practical solution to boosting building-integrated photovoltaics (BIPV) energy outputs significantly while reducing cooling- and heating-related energy consumption in buildings. By incorporating luminophore materials into lamination interlayers and using spectrally-selective thin-film coatings in conjunction with CuInSe2 solar cells, most of the visible solar radiation can be transmitted through the glass window with minimum attenuation while ultraviolet (UV) radiation is down-converted and routed together with a significant part of infrared radiation to the edges for collection by solar cells. Experimental results demonstrate a 10 cm × 10 cm vertically-placed energy-harvesting clear glass …
Nanoparticle Plasmonics: Going Practical With Transition Metal Nitrides, U. Guler, V. M. Shalaev, A. Boltasseva
Nanoparticle Plasmonics: Going Practical With Transition Metal Nitrides, U. Guler, V. M. Shalaev, A. Boltasseva
U. Guler
Promising designs and experimental realizations of devices with unusual properties in the field of plasmonics have attracted a great deal of attention over the past few decades. However, the high expectations for realized technology products have not been met so far. The main complication is the absence of robust, high performance, low cost plasmonic materials that can be easily integrated into already established technologies such as microelectronics. This review provides a brief discussion on alternative plasmonic materials for localized surface plasmon applications and focuses on transition metal nitrides, in particular, titanium nitride, which has recently been shown to be a …
Characterization Of Airborne Particles Generated From Metal Active Gas Welding Processes, João F. Gomes
Characterization Of Airborne Particles Generated From Metal Active Gas Welding Processes, João F. Gomes
João F Gomes
No abstract provided.
Assessment And Control Of Nanoparticles Exposure In Welding Operations By Use Of A Control Banding Tool (Doi: 10.1016/J.Jclepro.2014.11.010), João F. Gomes
João F Gomes
No abstract provided.
Tuning The Magnetostructural Phase Transition In Ferh Nanocomposites, Radhika Barua, Xiujuan Jiang, Felix Jiménez-Villacorta, J. Shield, D. Heiman, L. Lewis
Tuning The Magnetostructural Phase Transition In Ferh Nanocomposites, Radhika Barua, Xiujuan Jiang, Felix Jiménez-Villacorta, J. Shield, D. Heiman, L. Lewis
Donald Heiman
Effects of nanostructuring on the magnetostructural response of the near-equiatomic FeRh phase were investigated in nanocomposite materials synthesized by rapid solidification and subsequent annealing of an alloy of nominal atomic composition (FeRh)5Cu95. Transmission electron microscopy studies confirm attainment of a phase-separated system of nanoscaled (∼10–15 nm diameter) precipitates, consistent with FeRh embedded in a Cu matrix. These nanoprecipitates are crystallographically aligned with the coarse-grained Cu matrix and possess an L10-type (CuAu 1) structure, in contrast to the B2 (CsCl)-type structure of bulk FeRh. It is proposed that the face-centered cubic crystal structure of the …
Tuning The Magnetostructural Phase Transition In Ferh Nanocomposites, Radhika Barua, Xiujuan Jiang, Felix Jiménez-Villacorta, J. E. Shield, D. Heiman, L. H. Lewis
Tuning The Magnetostructural Phase Transition In Ferh Nanocomposites, Radhika Barua, Xiujuan Jiang, Felix Jiménez-Villacorta, J. E. Shield, D. Heiman, L. H. Lewis
Laura H. Lewis
Effects of nanostructuring on the magnetostructural response of the near-equiatomic FeRh phase were investigated in nanocomposite materials synthesized by rapid solidification and subsequent annealing of an alloy of nominal atomic composition (FeRh)5Cu95. Transmission electron microscopy studies confirm attainment of a phase-separated system of nanoscaled (∼10–15 nm diameter) precipitates, consistent with FeRh embedded in a Cu matrix. These nanoprecipitates are crystallographically aligned with the coarse-grained Cu matrix and possess an L10-type (CuAu 1) structure, in contrast to the B2 (CsCl)-type structure of bulk FeRh. It is proposed that the face-centered cubic crystal structure of the Cu matrix serves as a template …
Tuning The Magnetostructural Phase Transition In Ferh Nanocomposites, Radhika Barua, Xiujuan Jiang, Felix Jiménez-Villacorta, J. E. Shield, D. Heiman, L. H. Lewis
Tuning The Magnetostructural Phase Transition In Ferh Nanocomposites, Radhika Barua, Xiujuan Jiang, Felix Jiménez-Villacorta, J. E. Shield, D. Heiman, L. H. Lewis
Felix Jiménez-Villacorta
Effects of nanostructuring on the magnetostructural response of the near-equiatomic FeRh phase were investigated in nanocomposite materials synthesized by rapid solidification and subsequent annealing of an alloy of nominal atomic composition (FeRh)5Cu95. Transmission electron microscopy studies confirm attainment of a phase-separated system of nanoscaled (∼10–15 nm diameter) precipitates, consistent with FeRh embedded in a Cu matrix. These nanoprecipitates are crystallographically aligned with the coarse-grained Cu matrix and possess an L10-type (CuAu 1) structure, in contrast to the B2 (CsCl)-type structure of bulk FeRh. It is proposed that the face-centered cubic crystal structure of the Cu matrix serves as a template …
Large Coercivity In Nanostructured Rare-Earth-Free Mnₓga Films, Don Heiman, Tom Nummy, Steve Bennett, Tom Cardinal
Large Coercivity In Nanostructured Rare-Earth-Free Mnₓga Films, Don Heiman, Tom Nummy, Steve Bennett, Tom Cardinal
Donald Heiman
The magnetic hysteresis of MnₓGa films exhibit remarkably large coercive fields as high as μₒHC=2.5 T when fabricated with nanoscale particles of a suitable size and orientation. This coercivity is an order of magnitude larger than in well-ordered epitaxial film counterparts and bulk materials. The enhanced coercivity is attributed to the combination of large magnetocrystalline anisotropy and ~50-100 nm size nanoparticles. The large coercivity is also replicated in the electrical properties through the anomalous Hall effect. The magnitude of the coercivity approaches that found in rare-earth magnets, making them attractive for rare-earth-free magnet applications.
High-Throughput Assembly Of Nanoelements In Nanoporous Alumina Templates, Evin Gultepe, Dattatri K. Nagesha, Latika Menon, Ahmed A. Busnaina, Srinivas Sridhar
High-Throughput Assembly Of Nanoelements In Nanoporous Alumina Templates, Evin Gultepe, Dattatri K. Nagesha, Latika Menon, Ahmed A. Busnaina, Srinivas Sridhar
Srinivas Sridhar
The authors demonstrate a nanofabrication method utilizing nanoporous alumina templates which involves directed three dimensional assembly of nanoparticles inside the pores by means of an electrophoretic technique. In their demonstration, they have assembled polystyrene nanobeads with diameter of 50 nm inside nanopore arrays of height of 250 nm and diameter of 80 nm. Such a technique is particularly useful for large-scale, rapid assembly of nanoelements for potential device applications.
Experimental And Numerical Investigation Of Nanoparticle Removal Using Acoustic Streaming And The Effect Of Time, Kaveh Bakhtari, Rasim O. Guldiken, Prashanth Makaram, Ahmed A. Busnaina, Jin-Goo Park
Experimental And Numerical Investigation Of Nanoparticle Removal Using Acoustic Streaming And The Effect Of Time, Kaveh Bakhtari, Rasim O. Guldiken, Prashanth Makaram, Ahmed A. Busnaina, Jin-Goo Park
Jin-Goo Park
Theremoval of nanoparticles is becoming increasingly challenging as the minimumlinewidth continues to decrease in semiconductor manufacturing. In this paper,the removal of nanoparticles from flat substrates using acoustic streamingis investigated. Bare silicon wafers and masks with a 4 nmsilicon cap layer are cleaned. The silicon-cap films are usedin extreme ultraviolet masks to protect Mo–Si reflective multilayers. Theremoval of 63 nm polystyrene latex (PSL) particles from these substratesis conducted using single-wafer megasonic cleaning. The results show higherthan 99% removal of PSL nanoparticles. The results also showthat dilute SC1 provides faster removal of particles, which isalso verified by the analytical analysis. Particle removal …
Effect Of Different Deposition Mediums On The Adhesion And Removal Of Particles, S. Hu, Tae-Hoon Kim, Jin-Goo Park, Ahmed A. Busnaina
Effect Of Different Deposition Mediums On The Adhesion And Removal Of Particles, S. Hu, Tae-Hoon Kim, Jin-Goo Park, Ahmed A. Busnaina
Jin-Goo Park
The purpose of this study is to investigate the effect of the different deposition mediums on the adhesion and removal of particles. Polystyrene latex (PSL) particles (50 µm) are deposited on thermal oxide and silicon nitride coated silicon wafers using different suspension mediums: air, isopropyl alcohol (IPA), and deionized water and then removed in a dry environment. The results show that PSL particles deposited on oxide are easier to remove than those on nitride due to a higher van der Waals force in all deposition mediums. In addition, dry particles deposited in air are much easier to remove than those …
Directed Assembly Of Gold Nanoparticle Nanowires And Networks For Nanodevices, Xugang Xiong, Ahmed A. Busnaina, Selvapraba Selvarasah, Sivasubramanian Somu, Ming Wei, Joey Mead, Chia-Ling Chen, Juan Aceros, Prashanth Makaram, Mehmet R. Dokmeci
Directed Assembly Of Gold Nanoparticle Nanowires And Networks For Nanodevices, Xugang Xiong, Ahmed A. Busnaina, Selvapraba Selvarasah, Sivasubramanian Somu, Ming Wei, Joey Mead, Chia-Ling Chen, Juan Aceros, Prashanth Makaram, Mehmet R. Dokmeci
Sivasubramanian Somu
Alternating electric field is used to assemble gold nanoparticle nanowires from liquid suspensions. The effects of electrode geometry and the dielectrophoresis force on the chaining and branching of nanowire formation are investigated. The nanowire assembly processes are modeled using finite element calculations, and the particle trajectories under the combined influence of dielectrophoresis force and viscous drag are simulated. Nanoparticle nanowires with 10 nm resolution are fabricated. The wires can be further oriented along an externally introduced flow. This work provides an approach towards rapid assembly and organization of ultrasmall nanoparticle networks.
Determination Of Airborne Nanoparticles From Welding Operations, João F. Gomes
Determination Of Airborne Nanoparticles From Welding Operations, João F. Gomes
João F Gomes
The aim of this study is to assess the levels of airborne ultrafine particles emitted in welding processes (tungsten inert gas (TIG), metal active gas (MAG) of carbon steel and friction stir welding (FSW) of aluminium) in terms of deposited area in pulmonary alveolar tract using a Nanoparticle Surface Area Monitor (NSAM) analyzer. The obtained results showed the dependence from process parameters on emitted ultrafine particles and demonstrated the presence of ultrafine particles compared to background levels. Data indicated that the process that resulted in the lowest levels of alveolar deposited surface area (ADSA) was FSW, followed by TIG and …
Direct Measurement Of Graphene Adhesion On Silicon Surface By Intercalation Of Nanoparticles, Zong Zong, Chia-Ling Chen, Mehmet R. Dokmeci, Kai-Tak Wan
Direct Measurement Of Graphene Adhesion On Silicon Surface By Intercalation Of Nanoparticles, Zong Zong, Chia-Ling Chen, Mehmet R. Dokmeci, Kai-Tak Wan
Kai-tak Wan
We report a technique to characterize adhesion of monolayered/multilayered graphene sheets on silicon wafer. Nanoparticles trapped at graphene-silicon interface act as point wedges to support axisymmetric blisters. Local adhesion strength is found by measuring the particle height and blister radius using a scanning electron microscope. Adhesion energy of the typical graphene-silicon interface is measured to be 151±28 mJ/m2. The proposed method and our measurements provide insights in fabrication and reliability of microelectromechanical/nanoelectromechanical systems.
Direct Measurement Of Graphene Adhesion On Silicon Surface By Intercalation Of Nanoparticles, Zong Zong, Chia-Ling Chen, Mehmet Dokmeci, Kai-Tak Wan
Direct Measurement Of Graphene Adhesion On Silicon Surface By Intercalation Of Nanoparticles, Zong Zong, Chia-Ling Chen, Mehmet Dokmeci, Kai-Tak Wan
Mehmet R. Dokmeci
We report a technique to characterize adhesion of monolayered/multilayered graphene sheets on silicon wafer. Nanoparticles trapped at graphene-silicon interface act as point wedges to support axisymmetric blisters. Local adhesion strength is found by measuring the particle height and blister radius using a scanning electron microscope. Adhesion energy of the typical graphene-silicon interface is measured to be 151±28 mJ/m2. The proposed method and our measurements provide insights in fabrication and reliability of microelectromechanical/nanoelectromechanical systems.
High-Throughput Assembly Of Nanoelements In Nanoporous Alumina Templates, Evin Gultepe, Dattatri K. Nagesha, Latika Menon, Ahmed A. Busnaina, Srinivas Sridhar
High-Throughput Assembly Of Nanoelements In Nanoporous Alumina Templates, Evin Gultepe, Dattatri K. Nagesha, Latika Menon, Ahmed A. Busnaina, Srinivas Sridhar
Dattatri K. Nagesha
The authors demonstrate a nanofabrication method utilizing nanoporous alumina templates which involves directed three dimensional assembly of nanoparticles inside the pores by means of an electrophoretic technique. In their demonstration, they have assembled polystyrene nanobeads with diameter of 50 nm inside nanopore arrays of height of 250 nm and diameter of 80 nm. Such a technique is particularly useful for large-scale, rapid assembly of nanoelements for potential device applications.
High-Throughput Assembly Of Nanoelements In Nanoporous Alumina Templates, Evin Gultepe, Dattatri K. Nagesha, Latika Menon, Ahmed A. Busnaina, Srinivas Sridhar
High-Throughput Assembly Of Nanoelements In Nanoporous Alumina Templates, Evin Gultepe, Dattatri K. Nagesha, Latika Menon, Ahmed A. Busnaina, Srinivas Sridhar
Latika Menon
The authors demonstrate a nanofabrication method utilizing nanoporous alumina templates which involves directed three dimensional assembly of nanoparticles inside the pores by means of an electrophoretic technique. In their demonstration, they have assembled polystyrene nanobeads with diameter of 50 nm inside nanopore arrays of height of 250 nm and diameter of 80 nm. Such a technique is particularly useful for large-scale, rapid assembly of nanoelements for potential device applications.
Three Dimensional Controlled Assembly Of Gold Nanoparticles Using A Micromachined Platform, Nishant Khanduja, Selvapraba Selvarasah, Chia-Ling Chen, Mehmet R. Dokmeci, Xugang Xiong, Prashanth Makaram, Ahmed A. Busnaina
Three Dimensional Controlled Assembly Of Gold Nanoparticles Using A Micromachined Platform, Nishant Khanduja, Selvapraba Selvarasah, Chia-Ling Chen, Mehmet R. Dokmeci, Xugang Xiong, Prashanth Makaram, Ahmed A. Busnaina
Ahmed A. Busnaina
By using optical lithographic procedures, the authors present a micromachined platform for large scale three dimensional (3D) assembly of gold nanoparticles with diameters of ∼ 50 nm. The gold nanoparticles are formed into 3D low resistance bridges (two terminal resistance of ∼ 40 Ω) interconnecting the two microelectrodes using ac dielectrophoresis. The thickness of the parylene interlevel dielectric can be adjusted to vary the height of the 3D platform for meeting different application requirements. This research represents a step towards realizing high density, three dimensional structures and devices for applications such as nanosensors, vertical integration of nanosystems, and characterization of …
Experimental And Numerical Investigation Of Nanoparticle Removal Using Acoustic Streaming And The Effect Of Time, Kaveh Bakhtari, Rasim O. Guldiken, Prashanth Makaram, Ahmed A. Busnaina, Jin-Goo Park
Experimental And Numerical Investigation Of Nanoparticle Removal Using Acoustic Streaming And The Effect Of Time, Kaveh Bakhtari, Rasim O. Guldiken, Prashanth Makaram, Ahmed A. Busnaina, Jin-Goo Park
Ahmed A. Busnaina
Theremoval of nanoparticles is becoming increasingly challenging as the minimumlinewidth continues to decrease in semiconductor manufacturing. In this paper,the removal of nanoparticles from flat substrates using acoustic streamingis investigated. Bare silicon wafers and masks with a 4 nmsilicon cap layer are cleaned. The silicon-cap films are usedin extreme ultraviolet masks to protect Mo–Si reflective multilayers. Theremoval of 63 nm polystyrene latex (PSL) particles from these substratesis conducted using single-wafer megasonic cleaning. The results show higherthan 99% removal of PSL nanoparticles. The results also showthat dilute SC1 provides faster removal of particles, which isalso verified by the analytical analysis. Particle removal …
Directed Assembly Of Gold Nanoparticle Nanowires And Networks For Nanodevices, Xugang Xiong, Ahmed A. Busnaina, Selvapraba Selvarasah, Sivasubramanian Somu, Ming Wei, Joey Mead, Chia-Ling Chen, Juan Aceros, Prashanth Makaram, Mehmet R. Dokmeci
Directed Assembly Of Gold Nanoparticle Nanowires And Networks For Nanodevices, Xugang Xiong, Ahmed A. Busnaina, Selvapraba Selvarasah, Sivasubramanian Somu, Ming Wei, Joey Mead, Chia-Ling Chen, Juan Aceros, Prashanth Makaram, Mehmet R. Dokmeci
Ahmed A. Busnaina
Alternating electric field is used to assemble gold nanoparticle nanowires from liquid suspensions. The effects of electrode geometry and the dielectrophoresis force on the chaining and branching of nanowire formation are investigated. The nanowire assembly processes are modeled using finite element calculations, and the particle trajectories under the combined influence of dielectrophoresis force and viscous drag are simulated. Nanoparticle nanowires with 10 nm resolution are fabricated. The wires can be further oriented along an externally introduced flow. This work provides an approach towards rapid assembly and organization of ultrasmall nanoparticle networks.
High-Throughput Assembly Of Nanoelements In Nanoporous Alumina Templates, Evin Gultepe, Dattatri K. Nagesha, Latika Menon, Ahmed A. Busnaina, Srinivas Sridhar
High-Throughput Assembly Of Nanoelements In Nanoporous Alumina Templates, Evin Gultepe, Dattatri K. Nagesha, Latika Menon, Ahmed A. Busnaina, Srinivas Sridhar
Ahmed A. Busnaina
The authors demonstrate a nanofabrication method utilizing nanoporous alumina templates which involves directed three dimensional assembly of nanoparticles inside the pores by means of an electrophoretic technique. In their demonstration, they have assembled polystyrene nanobeads with diameter of 50 nm inside nanopore arrays of height of 250 nm and diameter of 80 nm. Such a technique is particularly useful for large-scale, rapid assembly of nanoelements for potential device applications.
Directed Assembly Of Gold Nanoparticle Nanowires And Networks For Nanodevices, Xugang Xiong, Ahmed A. Busnaina, Selvapraba Selvarasah, Sivasubramanian Somu, Ming Wei, Joey Mead, Chia-Ling Chen, Juan Aceros, Prashanth Makaram, Mehmet R. Dokmeci
Directed Assembly Of Gold Nanoparticle Nanowires And Networks For Nanodevices, Xugang Xiong, Ahmed A. Busnaina, Selvapraba Selvarasah, Sivasubramanian Somu, Ming Wei, Joey Mead, Chia-Ling Chen, Juan Aceros, Prashanth Makaram, Mehmet R. Dokmeci
Mehmet R. Dokmeci
Alternating electric field is used to assemble gold nanoparticle nanowires from liquid suspensions. The effects of electrode geometry and the dielectrophoresis force on the chaining and branching of nanowire formation are investigated. The nanowire assembly processes are modeled using finite element calculations, and the particle trajectories under the combined influence of dielectrophoresis force and viscous drag are simulated. Nanoparticle nanowires with 10 nm resolution are fabricated. The wires can be further oriented along an externally introduced flow. This work provides an approach towards rapid assembly and organization of ultrasmall nanoparticle networks.
Three Dimensional Controlled Assembly Of Gold Nanoparticles Using A Micromachined Platform, Nishant Khanduja, Selvapraba Selvarasah, Chia-Ling Chen, Mehmet R. Dokmeci, Xugang Xiong, Prashanth Makaram, Ahmed A. Busnaina
Three Dimensional Controlled Assembly Of Gold Nanoparticles Using A Micromachined Platform, Nishant Khanduja, Selvapraba Selvarasah, Chia-Ling Chen, Mehmet R. Dokmeci, Xugang Xiong, Prashanth Makaram, Ahmed A. Busnaina
Mehmet R. Dokmeci
By using optical lithographic procedures, the authors present a micromachined platform for large scale three dimensional (3D) assembly of gold nanoparticles with diameters of ∼ 50 nm. The gold nanoparticles are formed into 3D low resistance bridges (two terminal resistance of ∼ 40 Ω) interconnecting the two microelectrodes using ac dielectrophoresis. The thickness of the parylene interlevel dielectric can be adjusted to vary the height of the 3D platform for meeting different application requirements. This research represents a step towards realizing high density, three dimensional structures and devices for applications such as nanosensors, vertical integration of nanosystems, and characterization of …
Effect Of Particle Properties And Light Polarization On The Plasmonic Resonances In Metallic Nanoparticles, U. Guler, R. Turan
Effect Of Particle Properties And Light Polarization On The Plasmonic Resonances In Metallic Nanoparticles, U. Guler, R. Turan
U. Guler
The resonance behavior of localized surface plasmons in silver and gold nanoparticles was studied in the visible and near-infrared regions of the electromagnetic spectrum. Arrays of nano-sized gold (Au) and silver (Ag) particles with different properties were produced with electron-beam lithography technique over glass substrates. The effect of the particle size, shape variations, period, thickness, metal type, substrate type and sulfidation were studied via transmission and reflectance measurements. The results are compared with the theoretical calculations based on the DDA simulations performed by software developed in this study. We propose a new intensity modulation technique based on localized surface plasmons …