Open Access. Powered by Scholars. Published by Universities.®

Nanoscience and Nanotechnology Commons™

Open Access. Powered by Scholars. Published by Universities.®

Engineering Science and Materials

2008

Articles 1 - 16 of 16

Full-Text Articles in Nanoscience and Nanotechnology

Studies Of Surface Diffusion In Pemfc Electrodes, Jiang-Shui Luo, Jian Chen, Bao-Lian Yi, Chuan-Sin Cha, Hua-Min Zhang Nov 2008

Studies Of Surface Diffusion In Pemfc Electrodes, Jiang-Shui Luo, Jian Chen, Bao-Lian Yi, Chuan-Sin Cha, Hua-Min Zhang

Journal of Electrochemistry

A PEMFC electrode consisting of dual-layer catalyst layer(CL) was fabricated in this work.The outer CL was Nafion-free,while the inner CL was Nafion-bonded.The effects of Pt/C catalyst in the outer CL that did not contact with Nafion on the current generation in PEMFC electrodes were investigated.Cyclic voltammetric studies indicated that the Pt/C catalyst in the outer CL without direct contact with Nafion was still electrochemically active in taking part in the adsorption/desorption of hydrogen and the electrochemical oxidation/reduction of the oxygen-containing species occurring at the interface of "Pt/Nafion" in the inner CL.The polarization curves showed that the output voltage of the …

Go to article

The Hydrothermal Synthesis Of Nanoscale Lifepo_4 And Its Electrochemical Performance, Si-Min Wang, Ming-Sen Zheng, Quan-Feng Dong Nov 2008

The Hydrothermal Synthesis Of Nanoscale Lifepo_4 And Its Electrochemical Performance, Si-Min Wang, Ming-Sen Zheng, Quan-Feng Dong

Journal of Electrochemistry

The cathode materials of nanosiged LiFePO4 were prepared by hydrothermal templating synthesis.The grain sizes and electrochemical performance of LiFePO4 were controlled by surfactant.It was shown that the grain sizes varied from less than a hundred to hundreds nanometers by the SEM images.In the charge/discharge tests,the discharge capacities of the sample as a lithium ion battery were achieved to 150 mAh/g at 0.1C,140 mAh/g at 1C,and 126 mAh/g at 2C,with good cycling performance.

Go to article

Voltammetric Determination Of Iodate Ion In Table Salt By Carboxylic Carbon Nanotubes Modified Carbon Paste Electrode, Jun-Hua Li, Fu-Xing Zhang, Jian-Qiu Wang, Zhi-Feng Xu, Rong-Ying Zeng, Yan Yu Nov 2008

Voltammetric Determination Of Iodate Ion In Table Salt By Carboxylic Carbon Nanotubes Modified Carbon Paste Electrode, Jun-Hua Li, Fu-Xing Zhang, Jian-Qiu Wang, Zhi-Feng Xu, Rong-Ying Zeng, Yan Yu

Journal of Electrochemistry

A highly-sensitive and mercury-free method of determining iodate ion in table salt was established based on carboxylic carbon nanotubes modified carbon paste electrode.In 0.1 mol/L NaOH solution,there was a sensitive cathodic stripping peak on voltammograms.The stripping peak potential was-0.52 V when accumulation time of IO-3 at the modified electrode was 60 s and the potential scan rate was 300 mV/s.There was a good liner relationship between the peak current and IO-3 concentration in the range of 8.0×10-10 ～ 5.0×10-8 mol/L and 1.0×10-7 ～ 3.0×10-6 mol/L with the correlation coefficient of 0.999 and 0.998,respectively.The detection limit was 1.0 × 10-11 mol/L.This …

Go to article

Corrosion Inhibition Of Self-Assembled Films On Iron By Electrochemical Impedance Spectroscopy, Yuan-Yuan Feng, Shen-Hao Chen, Juan-Juan Zhou, Wen-Juan Guo Aug 2008

Corrosion Inhibition Of Self-Assembled Films On Iron By Electrochemical Impedance Spectroscopy, Yuan-Yuan Feng, Shen-Hao Chen, Juan-Juan Zhou, Wen-Juan Guo

Journal of Electrochemistry

The self-assembled films of tetradecylamine were formed on iron surface,and the inhibition ability of which for iron corrosion in 0.5 mol/L H2SO4 solutions was studied by electrochemical impedance spectroscopy technique.Results indicated that longer immersion time would result in stronger inhibition ability of the films.The maximal inhibition efficiency(IE) of the tetradecylamine films was 68.7%.When the tetradecylamine films were modified by dodecylthiol,the mixed films became denser and more stable,thus the inhibition ability increased remarkably.The η of the mixed films increased to 78.2%.

Go to article

Design And Fabrication Of The High Efficient Platinum-Nanoporous Gold Catalysts, Zhao-Na Liu, Jin-Tao Zhang, Fang Tian, Peng-Peng Liu, Hou-Yi Ma, Yi Ding Aug 2008

Design And Fabrication Of The High Efficient Platinum-Nanoporous Gold Catalysts, Zhao-Na Liu, Jin-Tao Zhang, Fang Tian, Peng-Peng Liu, Hou-Yi Ma, Yi Ding

Journal of Electrochemistry

The nanoporous gold(NPG) electrodes with uniform pore sizes and ligaments were prepared by using a simple dealloying method.The as-prepared NPG showed high catalytic activity towards the oxidation of formic acid and formaldehyde.After tiny amount of platinum was deposited onto the NPG substrate,not only the structure stability of NPG was greatly improved,but also the Pt-Au bimetallic catalysts displayed the better catalytic activity and the stronger poison resistance towards the electrooxidation of small organic molecules than the bulk platinum due to synergistic effect between Au and Pt compositions.

Go to article

Study On Electrocatalytic Oxidation Of Salbutamol At Carbon Nanotubes Modified Electrode, Ying-Liang Wei, Lu-Ping Zhang, Chen Shao, Hui Feng, Xian-Li Li Aug 2008

Study On Electrocatalytic Oxidation Of Salbutamol At Carbon Nanotubes Modified Electrode, Ying-Liang Wei, Lu-Ping Zhang, Chen Shao, Hui Feng, Xian-Li Li

Journal of Electrochemistry

The multi-wall carbon nanotubes(MWNT) were dispersed successfully into water in the presence of dihexadecyl hydrogen phosphate(DHP) and a stable well-distributed suspension.A was formed sensor based on the multi-carbon nanotubes film coated glassy carbon electrode was developed.The electrochemical response of salbutamol was studied by square wave voltammetry.The oxidation peak potential of salbutamol at the modified electrode was observed at 0.604 V,which shifted about 40 mV negatively.The peak current increased 4.5 folds,in contrast to that at a bare electrode.Under optimal measurement conditions,there was a good linear relationship between the peak current(Ipa) and salbutamol concentration(C) in the range from 8.3 × 1 0-7~ …

Go to article

Electrocatalytic Oxidation Of Salicylic Acid At Novel Gold Nanoparticle-Modified Glassy Carbon Electrode, Yan-Ping Cui, Chang-Zhu Yang, Jian Huang, Wen-Hong Pu, Jing-Dong Zhang Aug 2008

Electrocatalytic Oxidation Of Salicylic Acid At Novel Gold Nanoparticle-Modified Glassy Carbon Electrode, Yan-Ping Cui, Chang-Zhu Yang, Jian Huang, Wen-Hong Pu, Jing-Dong Zhang

Journal of Electrochemistry

A gold nano-particles modified glassy carbon electrode(GNP/GCE) was prepared by the"seed-mediated gold nano-particles growth method".Field emission scanning electron microscopy,ultraviolet-visible(UV-vis) spectroscopy analysis and electroalaylsis were employed to study the morphology and electrochemical performances.The resulting electrode showed excellent electro-catalytic activity toward the oxidation of salicylic acid and the response sensitivity was 1.8 fold than that obtained on GCE.Good linear relationship was obtained between response current and salicylic acid concentration in the range of 5.0 × 10-7 ~8.0 × 10-5 mol/L,which could be used in the detection of trace salicylic acid.

Go to article

Electrochemical Synthesis,Characterization And Fluorescence Property Of Nano Na_2sif_6, Guo-Xu Qin, Xin-Jun Wan, Xi-Mei Yuan, Dao-Bao Chu Aug 2008

Electrochemical Synthesis,Characterization And Fluorescence Property Of Nano Na_2sif_6, Guo-Xu Qin, Xin-Jun Wan, Xi-Mei Yuan, Dao-Bao Chu

Journal of Electrochemistry

The nano TiO2 film was prepared by sol-gel process and characterized with X-ray diffraction(XRD) and scanning electron microscope(SEM).It was found that the average size of pore diameter was about 80 nm for the nano TiO2 film.The Nano Na2SiF6 was synthesized by electrochemical deposition on the nanoporous film electrode and characterized with XRD and transmission electron microscope(TEM).The result showed that the average size of nanoparticle was 20 nm for the nano Na2SiF6.The fluorescence property of nano Na2SiF6 was also studied briefly.The result indicated that the nano Na2SiF6 exhibited strong fluorescence emission at 452.4 nm and 285 nm,respectively.

Go to article

Carbon Nanotube Array Electrodes Based Supercapacitors With 3.5v Working Voltage, Hao Zhang, Gao-Ping Cao, Yu-Sheng Yang, Zhen-Nan Gu, Bin Xu, Wen-Feng Zhang May 2008

Carbon Nanotube Array Electrodes Based Supercapacitors With 3.5v Working Voltage, Hao Zhang, Gao-Ping Cao, Yu-Sheng Yang, Zhen-Nan Gu, Bin Xu, Wen-Feng Zhang

Journal of Electrochemistry

The carbon nanotube arrays(CNTA) were grown directly on the substrates of Ta and stainless steel by chemical vapor deposition.The button-like supercapacitors were fabricated based the CNTA electrodes.The electrochemical performance of CNTA based supercapacitors presentsed high working voltage(3.5 V),long cycle life,and good rate capability.The power and energy densities are were 928 kW·kg-1and 19 Wh·kg-1,respectively(based on the mass of CNTA).

Go to article

Preparation And Photoelectrochemical Properties Of Fe-Doped Tio_2 Nanotube Arrays, Jing Li, Lan Sun, Hui-Fang Zhuang, Cheng-Lin Wang, Rong-Gui Du, Chang-Jian Lin May 2008

Preparation And Photoelectrochemical Properties Of Fe-Doped Tio_2 Nanotube Arrays, Jing Li, Lan Sun, Hui-Fang Zhuang, Cheng-Lin Wang, Rong-Gui Du, Chang-Jian Lin

Journal of Electrochemistry

The Fe-doped TiO2 nanotube arrays were fabricated in Fe(NO3)3-HF mixing solutions by electrochemical anodic oxidation method,and characterized by FESEM,Raman,XPS and DRS.The effect of Fe concentratiions on photoelectrochemical property of the arrays was also investigated.The diameters and lengths of Fe-doped TiO2 nanotube arrays were 50~90 nm and about 200 nm,respectively.Compared with the undoped TiO2 nanotube arrays,the absorption edge of Fe-doped TiO2 nanotube arrays appeared red shifting.The more Fe content,the larger red shifting,in addition,the photocurrent of Fe-doped TiO2 nanotube arrays increased obviously.

Go to article

Cyclic Voltammetry And In Situ Ftir Studies Of Cyanide Adsorption On Nanostructured Au Film Electrode In Alkaline Solutions, Chun-Hua Zhen, Chun-Jie Fan, Shi-Gang Sun May 2008

Cyclic Voltammetry And In Situ Ftir Studies Of Cyanide Adsorption On Nanostructured Au Film Electrode In Alkaline Solutions, Chun-Hua Zhen, Chun-Jie Fan, Shi-Gang Sun

Journal of Electrochemistry

The adsorption of cyanide(CN-) on electrodes of nanometer scale thin film of gold supported on glassy carbon(nm-Au/GC) in alkaline solutions were investigated using cyclic voltammetry and in situ FTIR spectroscopy.It has revealed that the electrodeposited nanostructured Au thin film exhibited AIREs(abnormal infrared effects) for CN-adsorption,which manifested 3 nonlinear IR spectral features: inversion of the direction of CN-band,enhancement of IR absorption of adsorbed CN-species(about 39.2 folds) and increase in the FWHM(full width at half maximum) of CN-band.

Go to article

Structure And Property Of Molecular Self-Assembled Membrane With Zirconium Ion, Tian-De Wang, Rong Wang, Xia-Qin Wu, Zhi-Gang Guo, Wei-Wei Ji May 2008

Structure And Property Of Molecular Self-Assembled Membrane With Zirconium Ion, Tian-De Wang, Rong Wang, Xia-Qin Wu, Zhi-Gang Guo, Wei-Wei Ji

Journal of Electrochemistry

According to the complex interaction between dodecyl phosphonate and stainless steel surface as well as the zirconium ion,the self-assembled monolayer and double-layer dodecyl phosphonate modified 304 type stainless steel electrode were prepared.The electrodes were characteristiced by static contact angles and electrochemical polarization methods.The results suggested that the double-layer modified stainless steel electrode had better corrosion inhibition effect than the monolayer modified electrode.

Go to article

Quick Tester With Usb Interface For The Corrosion Protection Properties Of Organic Coating, Xiang-Dong Zhuo, Chang-Jian Lin May 2008

Quick Tester With Usb Interface For The Corrosion Protection Properties Of Organic Coating, Xiang-Dong Zhuo, Chang-Jian Lin

Journal of Electrochemistry

According to the principle of multiple dynamic potential scaning polarization,a quick tester with USB interface for the fast study of corrosion resistance properties of organic coating/ metal system has been developed.This tester is portable,facile,practical,and has a strong function for data collection and data treatment.It is not only suitable for the accelerated test in laboratory,but also for the quick test and evaluation to the corrosion resistance of the organic coating/metal system in industrial spots.

Go to article

In Situ Measurement Of Chloride Concentration And Ph Distribution In The Crevice During The Crevice Corrosion Of Copper Electronic Board, Min Zhang, Xiang-Dong Zhuo, Chang-Jian Lin Feb 2008

In Situ Measurement Of Chloride Concentration And Ph Distribution In The Crevice During The Crevice Corrosion Of Copper Electronic Board, Min Zhang, Xiang-Dong Zhuo, Chang-Jian Lin

Journal of Electrochemistry

Although the crevice corrosion of metals had been extensively studied in the past years,it remained lack of direct experimental information of the micro chemical environments and electrochemical conditions inside the corroding crevice.The distribution of chloride concentration and local pH in the occluded area are the most crucial factors in development of crevice corrosion.The array probes in one dimension of Ag/AgCl and IrO2 array were developed in this work to in situ follow the distribution of chloride concentration and local pH in the occluded area during the crevice corrosion propagation.Based on a designed simulated crevice corrosion system in 0.5mol/L NaCl solution,the …

Go to article

A Study On Supercapacitor Based On Aligned Carbon Nanotubes, Xiao-Yan Ye, Yan-Zhi Wang, Hai-Yan Song, Zhuo Sun, Pin-Gang He, Yu-Zhi Fang Feb 2008

A Study On Supercapacitor Based On Aligned Carbon Nanotubes, Xiao-Yan Ye, Yan-Zhi Wang, Hai-Yan Song, Zhuo Sun, Pin-Gang He, Yu-Zhi Fang

Journal of Electrochemistry

Large scale vertically aligned carbon nanotubes(ACNTs) with uniform length and diameter were prepared by the pyrolysis of iron(Ⅱ) phthalocyanine at low pressure.The ACNTs were activated by electrolyte-activation,acid-activation or electrochemical activation.The performance of the capacitor based on activated ACNTs was characterized by cyclic voltammograms which was of rectangular shape,impedence spectroscopy in which the phase is above 80° and the result specific capacitance was 16～32 F/g,which suggest that the ACNTs are the promising material for the supercapacitor.

Go to article

Control Of The Nanoscale Crystallinity And Phase Separation In Polymer Solar Cells, Chih-Wei Chu, Hoichang Yang, Wei-Jen Hou, Jinsong Huang, Gang Li, Yang Yang Jan 2008

Control Of The Nanoscale Crystallinity And Phase Separation In Polymer Solar Cells, Chih-Wei Chu, Hoichang Yang, Wei-Jen Hou, Jinsong Huang, Gang Li, Yang Yang

Department of Mechanical and Materials Engineering: Faculty Publications

Grazing-incidence x-ray diffraction and atomic force microscopy were performed on bulk heterojunction regioregular poly(3-hexylthiophene) (RR-P3HT) [6,6]-phenyl-C71-butyric acid methyl esters spin-cast films with different film processing conditions to correlate the crystalline nanostructure of P3HT with the corresponding solar cell performance. The increase in long wavelength absorption for solvent annealed films is related to highly conjugated crystal structure of RR-P3HT phase-separated in the active layer. Upon thermal annealing, the solvent annealed 50-nm-thick device shows high solar cell performance with fill factor up to 73% and power conversion efficiency of 3.80%.

Go to article