Open Access. Powered by Scholars. Published by Universities.®
Nanoscience and Nanotechnology Commons™
Open Access. Powered by Scholars. Published by Universities.®
- Institution
- Keyword
-
- Electrophoresis (10)
- Nanotechnology (9)
- Nanoparticles (7)
- Carbon nanotubes (4)
- Finite element analysis (4)
-
- Gold (4)
- Hardness (4)
- Brittleness (3)
- Dip coating (3)
- Nanowires (3)
- Polymers (3)
- Adhesion (2)
- Contact resistance (2)
- Cracks (2)
- Ductile fracture (2)
- Electrodes (2)
- Gold alloys (2)
- Lithography (2)
- Mechanical contact (2)
- Microswitches (2)
- Molecular dynamics method (2)
- Plastics (2)
- Platinum alloys (2)
- Rhodium alloys (2)
- Ruthenium alloys (2)
- Scanning probe microscopy (2)
- Self-assembly (2)
- Semiconductor-metal boundaries (2)
- Surface contamination (2)
- Thin films (2)
- Publication
- Publication Type
Articles 1 - 20 of 20
Full-Text Articles in Nanoscience and Nanotechnology
High-Throughput Assembly Of Nanoelements In Nanoporous Alumina Templates, Evin Gultepe, Dattatri K. Nagesha, Latika Menon, Ahmed A. Busnaina, Srinivas Sridhar
High-Throughput Assembly Of Nanoelements In Nanoporous Alumina Templates, Evin Gultepe, Dattatri K. Nagesha, Latika Menon, Ahmed A. Busnaina, Srinivas Sridhar
Dattatri K. Nagesha
The authors demonstrate a nanofabrication method utilizing nanoporous alumina templates which involves directed three dimensional assembly of nanoparticles inside the pores by means of an electrophoretic technique. In their demonstration, they have assembled polystyrene nanobeads with diameter of 50 nm inside nanopore arrays of height of 250 nm and diameter of 80 nm. Such a technique is particularly useful for large-scale, rapid assembly of nanoelements for potential device applications.
High-Throughput Assembly Of Nanoelements In Nanoporous Alumina Templates, Evin Gultepe, Dattatri K. Nagesha, Latika Menon, Ahmed A. Busnaina, Srinivas Sridhar
High-Throughput Assembly Of Nanoelements In Nanoporous Alumina Templates, Evin Gultepe, Dattatri K. Nagesha, Latika Menon, Ahmed A. Busnaina, Srinivas Sridhar
Latika Menon
The authors demonstrate a nanofabrication method utilizing nanoporous alumina templates which involves directed three dimensional assembly of nanoparticles inside the pores by means of an electrophoretic technique. In their demonstration, they have assembled polystyrene nanobeads with diameter of 50 nm inside nanopore arrays of height of 250 nm and diameter of 80 nm. Such a technique is particularly useful for large-scale, rapid assembly of nanoelements for potential device applications.
Three Dimensional Controlled Assembly Of Gold Nanoparticles Using A Micromachined Platform, Nishant Khanduja, Selvapraba Selvarasah, Chia-Ling Chen, Mehmet R. Dokmeci, Xugang Xiong, Prashanth Makaram, Ahmed A. Busnaina
Three Dimensional Controlled Assembly Of Gold Nanoparticles Using A Micromachined Platform, Nishant Khanduja, Selvapraba Selvarasah, Chia-Ling Chen, Mehmet R. Dokmeci, Xugang Xiong, Prashanth Makaram, Ahmed A. Busnaina
Ahmed A. Busnaina
By using optical lithographic procedures, the authors present a micromachined platform for large scale three dimensional (3D) assembly of gold nanoparticles with diameters of ∼ 50 nm. The gold nanoparticles are formed into 3D low resistance bridges (two terminal resistance of ∼ 40 Ω) interconnecting the two microelectrodes using ac dielectrophoresis. The thickness of the parylene interlevel dielectric can be adjusted to vary the height of the 3D platform for meeting different application requirements. This research represents a step towards realizing high density, three dimensional structures and devices for applications such as nanosensors, vertical integration of nanosystems, and characterization of …
Scalable Nanotemplate Assisted Directed Assembly Of Single Walled Carbon Nanotubes For Nanoscale Devices, Prashanth Makaram, Sivasubramanian Somu, Xugang Xiong, Ahmed A. Busnaina, Yung-Joon Jung, Nicol E. Mcgruer
Scalable Nanotemplate Assisted Directed Assembly Of Single Walled Carbon Nanotubes For Nanoscale Devices, Prashanth Makaram, Sivasubramanian Somu, Xugang Xiong, Ahmed A. Busnaina, Yung-Joon Jung, Nicol E. Mcgruer
Ahmed A. Busnaina
The authors demonstrate precise alignment and controlled assembly of single wall nanotube (SWNT) bundles at a fast rate over large areas by combining electrophoresis and dip coating processes. SWNTs in solution are assembled on prepatterned features that are 80 nm wide and separated by 200 nm. The results show that the direction of substrate withdrawal significantly affects the orientation and alignment of the assembled SWNT bundles. I-V characterization is carried out to demonstrate electrical continuity of these assembled SWNT bundles.
Directed Assembly Of Gold Nanoparticle Nanowires And Networks For Nanodevices, Xugang Xiong, Ahmed A. Busnaina, Selvapraba Selvarasah, Sivasubramanian Somu, Ming Wei, Joey Mead, Chia-Ling Chen, Juan Aceros, Prashanth Makaram, Mehmet R. Dokmeci
Directed Assembly Of Gold Nanoparticle Nanowires And Networks For Nanodevices, Xugang Xiong, Ahmed A. Busnaina, Selvapraba Selvarasah, Sivasubramanian Somu, Ming Wei, Joey Mead, Chia-Ling Chen, Juan Aceros, Prashanth Makaram, Mehmet R. Dokmeci
Ahmed A. Busnaina
Alternating electric field is used to assemble gold nanoparticle nanowires from liquid suspensions. The effects of electrode geometry and the dielectrophoresis force on the chaining and branching of nanowire formation are investigated. The nanowire assembly processes are modeled using finite element calculations, and the particle trajectories under the combined influence of dielectrophoresis force and viscous drag are simulated. Nanoparticle nanowires with 10 nm resolution are fabricated. The wires can be further oriented along an externally introduced flow. This work provides an approach towards rapid assembly and organization of ultrasmall nanoparticle networks.
High-Throughput Assembly Of Nanoelements In Nanoporous Alumina Templates, Evin Gultepe, Dattatri K. Nagesha, Latika Menon, Ahmed A. Busnaina, Srinivas Sridhar
High-Throughput Assembly Of Nanoelements In Nanoporous Alumina Templates, Evin Gultepe, Dattatri K. Nagesha, Latika Menon, Ahmed A. Busnaina, Srinivas Sridhar
Ahmed A. Busnaina
The authors demonstrate a nanofabrication method utilizing nanoporous alumina templates which involves directed three dimensional assembly of nanoparticles inside the pores by means of an electrophoretic technique. In their demonstration, they have assembled polystyrene nanobeads with diameter of 50 nm inside nanopore arrays of height of 250 nm and diameter of 80 nm. Such a technique is particularly useful for large-scale, rapid assembly of nanoelements for potential device applications.
Separation Modes In Microcontacts Identified By The Rate Dependence Of The Pull-Off Force, L. Chen, Nicol E. Mcgruer, George G. Adams, Yan Du
Separation Modes In Microcontacts Identified By The Rate Dependence Of The Pull-Off Force, L. Chen, Nicol E. Mcgruer, George G. Adams, Yan Du
George G. Adams
We report the observation of two distinct modes of rate-dependent behavior during contact cycling tests. One is a higher pull-off force at low cycling rates and the other is a higher pull-off force at high cycling rates. Subsequent investigation of these contacts using scanning electron microscopy (SEM) demonstrates that these two rate-dependent modes can be related to brittle and ductile separation modes. The former behavior is indicative of brittle separation, whereas the latter accompanies ductile separation. Thus by monitoring the rate dependence of the pull-off force, the type of separation mode can be identified during cycling without interrupting the test …
Contact Resistance Study Of Noble Metals And Alloy Films Using A Scanning Probe Microscope Test Station, Lei Chen, H. Lee, Z. J. Guo, Nicol E. Mcgruer, K. W. Gilbert, S. Mall, Kevin D. Leedy, George G. Adams
Contact Resistance Study Of Noble Metals And Alloy Films Using A Scanning Probe Microscope Test Station, Lei Chen, H. Lee, Z. J. Guo, Nicol E. Mcgruer, K. W. Gilbert, S. Mall, Kevin D. Leedy, George G. Adams
George G. Adams
The proper selection of electrical contact materials is one of the critical steps in designing a metal contact microelectromechanical system (MEMS) switch. Ideally, the contact should have both very low contact resistance and high wear resistance. Unfortunately this combination cannot be easily achieved with the contact materials currently used in macroswitches because the available contact force in microswitches is generally insufficient (less than 1 mN) to break through nonconductive surface layers. As a step in the materials selection process, three noble metals, platinum (Pt), rhodium (Rh), ruthenium (Ru), and their alloys with gold (Au) were deposited as thin films on …
A Parameter Study Of Separation Modes Of Adhering Microcontacts, Yan Du, George G. Adams, Nicol E. Mcgruer, Izhak Etsion
A Parameter Study Of Separation Modes Of Adhering Microcontacts, Yan Du, George G. Adams, Nicol E. Mcgruer, Izhak Etsion
George G. Adams
A finite element model was developed to study adhesion of elastic-plastic microcontacts in a previous investigation. An interesting result was the identification of two distinct separation modes, i.e. brittle and ductile separation. In the current study, that model is used to conduct a series of simulations to determine the influence of four nondimensional parameters (including the maximum load parameter) on the contact and on the separation modes. The results show that the parameter S (the ratio of the theoretical stress to the hardness) and δƒ/δc (representing the loading level) are the most important. Smaller S can only lead to brittle …
Contact Resistance Study Of Noble Metals And Alloy Films Using A Scanning Probe Microscope Test Station, Lei Chen, H. Lee, Z. J. Guo, Nicol E. Mcgruer, K. W. Gilbert, S. Mall, Kevin D. Leedy, George G. Adams
Contact Resistance Study Of Noble Metals And Alloy Films Using A Scanning Probe Microscope Test Station, Lei Chen, H. Lee, Z. J. Guo, Nicol E. Mcgruer, K. W. Gilbert, S. Mall, Kevin D. Leedy, George G. Adams
Nicol E. McGruer
The proper selection of electrical contact materials is one of the critical steps in designing a metal contact microelectromechanical system (MEMS) switch. Ideally, the contact should have both very low contact resistance and high wear resistance. Unfortunately this combination cannot be easily achieved with the contact materials currently used in macroswitches because the available contact force in microswitches is generally insufficient (less than 1 mN) to break through nonconductive surface layers. As a step in the materials selection process, three noble metals, platinum (Pt), rhodium (Rh), ruthenium (Ru), and their alloys with gold (Au) were deposited as thin films on …
A Parameter Study Of Separation Modes Of Adhering Microcontacts, Yan Du, George G. Adams, Nicol E. Mcgruer, Izhak Etsion
A Parameter Study Of Separation Modes Of Adhering Microcontacts, Yan Du, George G. Adams, Nicol E. Mcgruer, Izhak Etsion
Nicol E. McGruer
A finite element model was developed to study adhesion of elastic-plastic microcontacts in a previous investigation. An interesting result was the identification of two distinct separation modes, i.e. brittle and ductile separation. In the current study, that model is used to conduct a series of simulations to determine the influence of four nondimensional parameters (including the maximum load parameter) on the contact and on the separation modes. The results show that the parameter S (the ratio of the theoretical stress to the hardness) and δƒ/δc (representing the loading level) are the most important. Smaller S can only lead to brittle …
Scalable Nanotemplate Assisted Directed Assembly Of Single Walled Carbon Nanotubes For Nanoscale Devices, Prashanth Makaram, Sivasubramanian Somu, Xugang Xiong, Ahmed A. Busnaina, Yung-Joon Jung, Nicol E. Mcgruer
Scalable Nanotemplate Assisted Directed Assembly Of Single Walled Carbon Nanotubes For Nanoscale Devices, Prashanth Makaram, Sivasubramanian Somu, Xugang Xiong, Ahmed A. Busnaina, Yung-Joon Jung, Nicol E. Mcgruer
Nicol E. McGruer
The authors demonstrate precise alignment and controlled assembly of single wall nanotube (SWNT) bundles at a fast rate over large areas by combining electrophoresis and dip coating processes. SWNTs in solution are assembled on prepatterned features that are 80 nm wide and separated by 200 nm. The results show that the direction of substrate withdrawal significantly affects the orientation and alignment of the assembled SWNT bundles. I-V characterization is carried out to demonstrate electrical continuity of these assembled SWNT bundles.
Scalable Nanotemplate Assisted Directed Assembly Of Single Walled Carbon Nanotubes For Nanoscale Devices, Prashanth Makaram, Sivasubramanian Somu, Xugang Xiong, Ahmed A. Busnaina, Yung-Joon Jung, Nicol E. Mcgruer
Scalable Nanotemplate Assisted Directed Assembly Of Single Walled Carbon Nanotubes For Nanoscale Devices, Prashanth Makaram, Sivasubramanian Somu, Xugang Xiong, Ahmed A. Busnaina, Yung-Joon Jung, Nicol E. Mcgruer
Yung Joon Jung
The authors demonstrate precise alignment and controlled assembly of single wall nanotube (SWNT) bundles at a fast rate over large areas by combining electrophoresis and dip coating processes. SWNTs in solution are assembled on prepatterned features that are 80 nm wide and separated by 200 nm. The results show that the direction of substrate withdrawal significantly affects the orientation and alignment of the assembled SWNT bundles. I-V characterization is carried out to demonstrate electrical continuity of these assembled SWNT bundles.
Directed Assembly Of Gold Nanoparticle Nanowires And Networks For Nanodevices, Xugang Xiong, Ahmed A. Busnaina, Selvapraba Selvarasah, Sivasubramanian Somu, Ming Wei, Joey Mead, Chia-Ling Chen, Juan Aceros, Prashanth Makaram, Mehmet R. Dokmeci
Directed Assembly Of Gold Nanoparticle Nanowires And Networks For Nanodevices, Xugang Xiong, Ahmed A. Busnaina, Selvapraba Selvarasah, Sivasubramanian Somu, Ming Wei, Joey Mead, Chia-Ling Chen, Juan Aceros, Prashanth Makaram, Mehmet R. Dokmeci
Mehmet R. Dokmeci
Alternating electric field is used to assemble gold nanoparticle nanowires from liquid suspensions. The effects of electrode geometry and the dielectrophoresis force on the chaining and branching of nanowire formation are investigated. The nanowire assembly processes are modeled using finite element calculations, and the particle trajectories under the combined influence of dielectrophoresis force and viscous drag are simulated. Nanoparticle nanowires with 10 nm resolution are fabricated. The wires can be further oriented along an externally introduced flow. This work provides an approach towards rapid assembly and organization of ultrasmall nanoparticle networks.
Three Dimensional Controlled Assembly Of Gold Nanoparticles Using A Micromachined Platform, Nishant Khanduja, Selvapraba Selvarasah, Chia-Ling Chen, Mehmet R. Dokmeci, Xugang Xiong, Prashanth Makaram, Ahmed A. Busnaina
Three Dimensional Controlled Assembly Of Gold Nanoparticles Using A Micromachined Platform, Nishant Khanduja, Selvapraba Selvarasah, Chia-Ling Chen, Mehmet R. Dokmeci, Xugang Xiong, Prashanth Makaram, Ahmed A. Busnaina
Mehmet R. Dokmeci
By using optical lithographic procedures, the authors present a micromachined platform for large scale three dimensional (3D) assembly of gold nanoparticles with diameters of ∼ 50 nm. The gold nanoparticles are formed into 3D low resistance bridges (two terminal resistance of ∼ 40 Ω) interconnecting the two microelectrodes using ac dielectrophoresis. The thickness of the parylene interlevel dielectric can be adjusted to vary the height of the 3D platform for meeting different application requirements. This research represents a step towards realizing high density, three dimensional structures and devices for applications such as nanosensors, vertical integration of nanosystems, and characterization of …
Optical And Raman Characterization Of Ald Alumina Coated Multiwall Carbon Nanotubes And Nanoporous Gold Film, Naod Belai
Optical And Raman Characterization Of Ald Alumina Coated Multiwall Carbon Nanotubes And Nanoporous Gold Film, Naod Belai
UNLV Theses, Dissertations, Professional Papers, and Capstones
Due to their large surface to volume ratio nanostructures are inherently unstable. To insure long term stability of nano-devices, they have to be rendered inert to their environment. In this study, nanoporous gold films(NPGF) and multiwall carbon nanotubes were coated with ALD alumina of varying thicknesses. Subsequently, the plasmonic property of the former and electronic property of the latter was monitored by Transmittance and Raman Spectroscopy respectively. Transmittance spectra revealed that NPGF passivated by ALD-alumina maintains its plasmonic properties, i.e. its LSPR supporting properties remained intact. Raman spectra of ALD alumina passivated MWNTs show no coating induced changes in its …
Preparation And Characterization Of Iron Oxide And Hydroxide Based Nanomaterials, Guillermo Carbajal Franco
Preparation And Characterization Of Iron Oxide And Hydroxide Based Nanomaterials, Guillermo Carbajal Franco
Open Access Theses & Dissertations
Iron (Fe) oxides and hydroxides are common and abundant materials. They exhibit diverse crystal structures, properties and phenomena by virtue of which they find a wide range of scientific and technological applications. Controlled growth and manipulation of the specific structure and electronic behavior to meet the requirements of a given application is a challenging problem in view of many possible phases and composition of the resulting materials. The preparation method and experimental conditions will, therefore, significantly affect the properties and performance of Fe oxides and hydroxides. The goal of the project is to obtain Fe-based oxide/hydroxide catalytic materials and to …
Energy Band Engineering Using Polarization Induced Interface Charges In Mocvd Grown Iii-Nitride Heterojunction Devices, Neeraj Tripathi
Energy Band Engineering Using Polarization Induced Interface Charges In Mocvd Grown Iii-Nitride Heterojunction Devices, Neeraj Tripathi
Legacy Theses & Dissertations (2009 - 2024)
Characteristics of III-nitride based heterojunction devices are greatly influenced by the presence of high density of polarization induced interface charges. Research undertaken in the current doctoral thesis demonstrates the effect of presence of one, three and six sheets of polarization induced charges in three different III-nitride based devices, namely in a photocathode, a high electron mobility transistor (HEMT) and a hyperspectral detector structure. Through a systematic set of experiments and theoretical modeling an in-depth study of the interaction between multiple sheets of polarization induced charges and their impact on energy band profile was undertaken. Various device designs were studied and …
Synthesis, Processing And Characterization Of Silicon-Based Templated Nanowires, Jae Ho Lee
Synthesis, Processing And Characterization Of Silicon-Based Templated Nanowires, Jae Ho Lee
Legacy Theses & Dissertations (2009 - 2024)
Semiconductor and metallic nanowires have attracted substantial attention due to their wide variety of applications, ranging from nanoelectronics to energy storage devices. In particular, self-assembled silicon nanowires (SiNWs) may be an attractive alternative to conventionally processed planar silicon since SiNWs can potentially function as both the switch (i.e. transistor) and local interconnect (e.g. metal silicide nanowire) to form an inherently integrated nanoelectronic system. Also, hierarchical (branched) nanowire systems hold potential for catalysts or porous electrode applications for energy applications
Voltage Impulse Induced Bistable Magnetization Switching In Multiferroic Heterostructures, Tianxiang Nan
Voltage Impulse Induced Bistable Magnetization Switching In Multiferroic Heterostructures, Tianxiang Nan
Tianxiang Nan
We report on voltage impulse induced reversible bistable magnetization switching in FeGaB/lead zirconate titanate (PZT) multiferroic heterostructures at room temperature. This was realized through strain-mediated magnetoelectric coupling between ferroelectric PZT and ferromagnetic FeGaB layer. Two reversible and stable voltage-impulse induced mechanical strain states were obtained in the PZT by applying an electric field impulse with its amplitude smaller than the electric coercive field, which led to reversible voltage impulse induced bistable magnetization switching. These voltage impulse induced bistable magnetization switching in multiferroic heterostructures provides a promising approach to power efficient bistable magnetization switching that is crucial for information storage.