Open Access. Powered by Scholars. Published by Universities.®

Mining Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Physical Sciences and Mathematics

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 121 - 150 of 1953

Full-Text Articles in Mining Engineering

Compressibility Behavior Of Conditioned Sandy Clay Considering The Physical Degradation Of Foam: Tunneling Issue, Mœz Selmi, Yahya Alassaf, Mariem Kacem, Mehrez Jamei Nov 2023

Compressibility Behavior Of Conditioned Sandy Clay Considering The Physical Degradation Of Foam: Tunneling Issue, Mœz Selmi, Yahya Alassaf, Mariem Kacem, Mehrez Jamei

Journal of Sustainable Mining

Surfactants in the form of liquid foam are commonly used for ensuring the fluidity of conditioned soil during shield tunneling in mining zone. The compressibility can be significantly affected, depending on the percentage of fine soil. Thus, this paper investigates the compressibility of foam-conditioned fine soil. Oedometric tests as a function of the percentage of foam have been performed. Foam’s stability was analyzed, considering a laboratory soil made from 40% kaolinite and 60% of sand and mixed with a foaming agent based on an anionic surfactant. Experimental results showed that the foam stability was manifested through a reduction of the …

Go to article

Ventilation Of Tunnels During Drilling Using A Forcing Ventilation System – A Case Study, Krzysztof Słota, Zbigniew Słota Oct 2023

Ventilation Of Tunnels During Drilling Using A Forcing Ventilation System – A Case Study, Krzysztof Słota, Zbigniew Słota

Journal of Sustainable Mining

In Poland, more and more tunnels are being built using mining methods. Mostly ventilation systems are described for tunnels already commissioned. There are few examples of ventilation calculations for tunnels under construction. The paper shows a case study where calculations were made of the minimum air volume flow required to ventilate a tunnel during its tunnelling using four duct ventilation systems. The first system used two separate fans with a 1200 mm diameter duct line, the second system changed the diameter of the duct line to 1400 mm, the third system used one fan with two 1200 mm diameter duct …

Go to article

Influence Of Explosive Maximum Instantaneous Charge On Blasting Environmental Impact, Olukemi Yetunde Odeyemi, Blessing Olamide Taiwo, Olarewaju Alaba Oct 2023

Influence Of Explosive Maximum Instantaneous Charge On Blasting Environmental Impact, Olukemi Yetunde Odeyemi, Blessing Olamide Taiwo, Olarewaju Alaba

Journal of Sustainable Mining

Our research looked at the effect of explosive maximum instantaneous charge on ground vibrations and noise levels during blasting operations at the Calaba limestone quarry in Nigeria. Vibrock (V9000) seismograph was used to take readings related to ground vibrations and noise generated during all blasting operations that took place in the quarry for a period of one year. The results obtained indicate that the average ground vibration readings fall between 0.25mm/s to 3.6mm/s and the average noise decibel generated during the blasting operations between 35 to 158 dB. An artificial neural network (ANN) model is developed in this study for …

Go to article

Demo-Abstract: A Dtn System For Tracking Miners Using Gae-Lstm And Contact Graph Routing In An Underground Mine, Abhay Goyal, Sanjay Kumar Madria, Samuel Frimpong Oct 2023

Demo-Abstract: A Dtn System For Tracking Miners Using Gae-Lstm And Contact Graph Routing In An Underground Mine, Abhay Goyal, Sanjay Kumar Madria, Samuel Frimpong

Computer Science Faculty Research & Creative Works

Localization and prediction of movement of miners in underground mines have been a constant problem more so during a mine disaster. Due to the unavailability of GPS signals, the pillars are used as a method to locate these miners, and thus, location prediction is also carried out with reference to these pillars. In this work, we demon- strate a Delay-tolerant Network (DTN) system called Miner-Finder that leverages Machine Learning (ML) framework (GAE-LSTM) that works on edge devices (e.g., mobile phones, tablets) to predict the location of miners in an underground mine. The information such as speed, angle, time, nearest pillar …

Go to article

Gas Expansion Energy Of Coals With Different Metamorphic Degrees: Evolutionary Characteristics And Their Implications For The Outburst Prediction, Liu Gaofeng, Li Baolin, Zhang Zhen, Liu Huan, Guan Wenbo, Si Nian Oct 2023

Gas Expansion Energy Of Coals With Different Metamorphic Degrees: Evolutionary Characteristics And Their Implications For The Outburst Prediction, Liu Gaofeng, Li Baolin, Zhang Zhen, Liu Huan, Guan Wenbo, Si Nian

Coal Geology & Exploration

To achieve an elevated accuracy in the prediction of coal and gas outbursts, this study conducted mercury injection capillary pressure (MICP) tests and isotherm adsorption experiments on selected six coal samples with different metamorphic degrees. Furthermore, it calculated the gas expansion energy of coals and analyzed the evolutionary characteristics of the gas expansion energy of coals with different metamorphic degrees, as well as their relationships with the prediction indices of coal and gas outbursts. The results of this study are as follows: (1) The differences in the pore structures and adsorptivity of coals with different metamorphic degrees led to different …

Go to article

A Method For Identifying Faults Within Mining Faces Based On Spatial Statistics, Feng Yajie, Wen Guangchao, Wu Bingjie, Hu Zudong Oct 2023

A Method For Identifying Faults Within Mining Faces Based On Spatial Statistics, Feng Yajie, Wen Guangchao, Wu Bingjie, Hu Zudong

Coal Geology & Exploration

Minor faults within mining faces of coal mines severely affect gas drainage and coal seam mining. Accurately identifying parameters such as positions, throws, and attitudes of these faults is of great significance for the safe production of coal mines. To effectively reduce gas emissions, prevent gas explosions, and exploit and utilize gas resources, many gas drainage holes have been drilled during the construction of coal mines, providing favorable engineering conditions for identifying minor faults within coal seams. Compared with the conventional fault identification methods, which rely on the expertise of geologists, the identification model based on mathematical statistics and space …

Go to article

Water-Blocking Performance Of Laterite In Weak Deposition Areas Of Neogene Baode Formation And Its Significance Of Resource Exploitation, Zeng Yifan, Bao Han, Wu Qiang, Meng Shihao, Hua Zhaolai, Miao Yanping, Zhang Ye, Bu Wenyang Oct 2023

Water-Blocking Performance Of Laterite In Weak Deposition Areas Of Neogene Baode Formation And Its Significance Of Resource Exploitation, Zeng Yifan, Bao Han, Wu Qiang, Meng Shihao, Hua Zhaolai, Miao Yanping, Zhang Ye, Bu Wenyang

Coal Geology & Exploration

The in-depth study on the water-blocking performance of laterite in the weak deposition areas of the key aquiclude is of significant importance for mine production safety and ecological water resource protection. Specifically, the borehole data were re-optimized based on the regional sedimentary characteristics, the thickness distribution pattern of laterite deposit in Yushen mining area was studied, and the micro-engineering characteristics and control factors related to the water-blocking performance of laterite were explored. The results show that the deposition thickness of laterite gradually increases from northwest to southeast, the distribution of laterite becomes extremely uneven with the evolution of rivers, and …

Go to article

Water Inrush Mechanism Of Coal Mine Shaft Fracture Under Fluid-Solid Coupling, Xue Weipei, Shen Lei, Yao Zhishu, Cheng Hua, Rong Chuanxin Oct 2023

Water Inrush Mechanism Of Coal Mine Shaft Fracture Under Fluid-Solid Coupling, Xue Weipei, Shen Lei, Yao Zhishu, Cheng Hua, Rong Chuanxin

Coal Geology & Exploration

The occurrence of coal mine shaft fractures and water inrush accidents is alarmingly frequent, endangering the lives of underground personnel and compromising mine safety. To comprehend the influence of confined groundwater in the process of shaft fracture and the formation mechanism of water inrush channels, a model test was devised using similarity theory and coupled fluid-solid numerical simulation technology. The findings reveal that direct contact between the shaft lining and pressurized water hinders the development of load-bearing and deformation capacities. This is specifically evidenced by the premature appearance of the yield point, a reduction in peak strength and strain, and …

Go to article

Numerical Model Of Two-Region Flow By Constant-Head Pumping In An Unconfined Aquifer, Shi Pengyu, Zong Yijie, Teng Kaiqing, Liu Jianjun, Xiao Liang Oct 2023

Numerical Model Of Two-Region Flow By Constant-Head Pumping In An Unconfined Aquifer, Shi Pengyu, Zong Yijie, Teng Kaiqing, Liu Jianjun, Xiao Liang

Coal Geology & Exploration

In order to reveal the mechanism of two-region Darcian and non-Darcian flow induced by constant-head pumping tests in unconfined aquifers, a numerical model of well flow by constant-head pumping underground based on finite difference solution was proposed. In the model, it is assumed that the aquifer is divided into two regions according to the pumping flow characteristics: the finite non-Darcian flow region near the pumping well and the semi-infinite Darcian flow region far away from the pumping well. Specifically, the flow regime in the non-Darcian flow region was simulated by the Izbash’s equation, and the reliability of the proposed solution …

Go to article

An Attention Mechanism-Based Cnn-Bilstm Real-Time Transient Electromagnetic Method, Gu Yao, Xie Haijun, Zhou Zipeng, Li Lu Oct 2023

An Attention Mechanism-Based Cnn-Bilstm Real-Time Transient Electromagnetic Method, Gu Yao, Xie Haijun, Zhou Zipeng, Li Lu

Coal Geology & Exploration

The one-dimensional transient electromagnetic (TEM) method is time-consuming and suffers other drawbacks such as difficult parameter adjustment and heavy dependence on the initial model. Therefore, this study proposed a real-time TEM inversion method—the Attention mechanism-based convolutional neural network (CNN) - bidirectional Long Short-Term Memory (BiLSTM) (AC-BiLSTM). By fully utilizing the time difference, the AC-BiLSTM performed model training in non-observation time and the real-time inversion of the collected data in observation time. With the measured data mixed with a certain proportion of data obtained from forward modeling as the dataset, the sampling time and apparent resistivity as the input features in …

Go to article

Status And Development Of Intelligent Drilling Tools For Coal Mine, Gao Xiaoliang Oct 2023

Status And Development Of Intelligent Drilling Tools For Coal Mine, Gao Xiaoliang

Coal Geology & Exploration

As an important part of intelligent drilling, the intelligence of drilling tool system plays a crucial role in the intelligent development of coal mine underground drilling. In order to deeply explore the development direction of intelligent drilling tools, the research results and technical characteristics of intelligent drilling tools in coal mines were systematically sorted out from the aspects of directional drilling tools, measurement while drilling (MWD) system, intelligent drilling pipes and drill bits with reference to the experience in development of oil and gas industry, and the existing shortcomings were also summarized. It is pointed out that screw motor is …

Go to article

Research Progress Of Rotary Steerable System And Its Control Methods, Li Wei, Mou Lei, Zhou Xiancheng, Tan Xianhui, Fu Quan Oct 2023

Research Progress Of Rotary Steerable System And Its Control Methods, Li Wei, Mou Lei, Zhou Xiancheng, Tan Xianhui, Fu Quan

Coal Geology & Exploration

Rotary steerable system is a shining pearl in directional drilling technology and an important technical means to realize the low-cost and efficient development of oil and gas resources. First of all, the basic structure of the rotary steerable system was introduced. According to the different steering modes and bias effects, the rotary steerable system is divided into five categories: static push-the-bit type, dynamic push-the-bit type, static pointing type, dynamic point-the-bit type and mixed type, for which the steering principle was analyzed one by one. Secondly, according to the research and application of rotary steerable system technology at home and abroad, …

Go to article

Methods For Estimating Carbon Emissions From Coals In Underground Mines: A Case Study Of The Western Fukang Mining Area, Peng Rendong, Wei Bo, Li Xin, Zhang Ji, Zhang Zizhao, Wang Bo, Zhang Na, Cui Deguang Oct 2023

Methods For Estimating Carbon Emissions From Coals In Underground Mines: A Case Study Of The Western Fukang Mining Area, Peng Rendong, Wei Bo, Li Xin, Zhang Ji, Zhang Zizhao, Wang Bo, Zhang Na, Cui Deguang

Coal Geology & Exploration

Carbon emissions have come into sharp focus of human society. The carbon emissions from coals rank as the most predominant part of China’s total carbon emissions. Presently, there is no available study on the accurate calculation of carbon emissions from coals in typical underground mines in Xinjiang, with the CH4 emission even overlooked. This study centers on the carbon emissions from coals in underground mines in the western Fukang mining area. As per the occurrence laws of CH4 and CO2 in coal seams, as well as coal mining plans, this study classified the sources of carbon emissions …

Go to article

Pfc Numerical Analysis On Crack Initiation Mechanism Of Fracture Grouting In Top Of Ordovician Limestone, Liu Zhaoxing, Zhang Qi Oct 2023

Pfc Numerical Analysis On Crack Initiation Mechanism Of Fracture Grouting In Top Of Ordovician Limestone, Liu Zhaoxing, Zhang Qi

Coal Geology & Exploration

The advanced regional grouting is an effective means to prevent and control the water hazard of limestone in coal seam floor, and the fracture grouting projects is a key link to determine the effect of the grouting in floor against water hazard. However, due to the unclear understanding of the fracture initiation mechanism of the injected limestone stratum, the grouting pressure, grout water-cement ratio and other grouting parameters in the process of fracture grouting are not effectively controlled. Thus, it is difficult to guarantee the grouting effect. In order to solve the above problems, numerical simulation calculation was conducted for …

Go to article

Zoned Prediction Of Water Inflow After Dewatering Of Working Face Based On Waterrichness Zoning Of Aquifer, Yang Lei, Lei Fangchao, Hou Enke, Lu Bo, Feng Dong, Zhao Kaixing Oct 2023

Zoned Prediction Of Water Inflow After Dewatering Of Working Face Based On Waterrichness Zoning Of Aquifer, Yang Lei, Lei Fangchao, Hou Enke, Lu Bo, Feng Dong, Zhao Kaixing

Coal Geology & Exploration

As the weathered bedrock and burned rock aquifers seriously threaten the production safety of mines in the Jurassic coalfield of northern Shaanxi Province, accurate prediction of their waterrichness and water inflow at the working face is of great significance for water control in mines. Aiming at the weathered bedrock and burned rock aquifers with close hydraulic connection, the area where working face 15217 of Shaanxi Hongliulin Coal Mine is located was taken as the study area. Meanwhile, the aquifer thickness, lithological combination index, index of rock burning and weathering degree and core recovery was taken as the evaluation indexes. The …

Go to article

Study On Mesoscopic Failure Characteristics Of Layered Red Shale, Ma Zhenqian, Zhou Lang, Zuo Yujun, Zhang Jimin, Zou Yihuai, Cao Yunqin Oct 2023

Study On Mesoscopic Failure Characteristics Of Layered Red Shale, Ma Zhenqian, Zhou Lang, Zuo Yujun, Zhang Jimin, Zou Yihuai, Cao Yunqin

Coal Geology & Exploration

To study the mesoscopic failure characteristics of the layered red shale, uniaxial mechanical experiments were carried out by applying DSTD-1000 electro-hydraulic servo rigid pressure on the red shale with different bedding angles. Meanwhile, SEM and XRD experiments were implemented on debris to obtain its mechanical parameters, failure characteristics, microstructure, and relative content of components. Based on this, models of the red shale with different bedding angles were constructed using the discrete element PFC3D for the uniaxial compression experiments to study the mesoscopic failure characteristics of red shale. The results show that: (1) When the bedding angle θ=30°, 45°, …

Go to article

Manipulator Trajectory Planning Method Of Anchor Drilling Robot, Lei Mengyu, Zhang Xuhui, Yang Wenjuan, Dong Zheng, Wan Jicheng, Zhang Chao, Du Yuyang Oct 2023

Manipulator Trajectory Planning Method Of Anchor Drilling Robot, Lei Mengyu, Zhang Xuhui, Yang Wenjuan, Dong Zheng, Wan Jicheng, Zhang Chao, Du Yuyang

Coal Geology & Exploration

In order to improve the support efficiency of coal mine roadway and the automation intelligence of heading face, an anchor drilling robot integrating the cantilever roadheader and the six-degree-of-freedom manipulator was designed, and studied on the anchor drilling sequence planning strategy and the drilling boom trajectory planning method. Firstly, the kinematics model of the manipulator structure was established based on the improved DH method. On this basis, the forward and inverse kinematics solutions were analyzed, and the spatial position and the corresponding joint variable values of the drilling rig were calculated. Secondly, the manipulator space was analyzed based on Monte …

Go to article

Table Of Contents, The Editors Oct 2023

Table Of Contents, The Editors

Coal Geology & Exploration

No abstract provided.

Go to article

An Improved Automated Testing Model For Maceral Groups In Coals Based On Deeplabv3+, Hu Jinwei, Xi Zhenghao, Xu Guozhong, Li Zhongfeng, Liu Xiang Oct 2023

An Improved Automated Testing Model For Maceral Groups In Coals Based On Deeplabv3+, Hu Jinwei, Xi Zhenghao, Xu Guozhong, Li Zhongfeng, Liu Xiang

Coal Geology & Exploration

The identification of maceral groups in coals plays a critical role in analyzing the chemical properties of coals. However, manual identification is laborious and requires high expertise. Existing computer-assisted identification methods, mostly adopting deep learning-based semantic segmentation models, fail to accurately identify maceral groups in coals due to complex compositions of microscopic coal images and the presence of transitional components. Therefore, this study proposed an improved DeeplabV3+ semantic segmentation model integrating the Swin Transformer backbone network and the SkNet. First, to deal with the challenge of feature extraction caused by the intertwined maceral groups and the presence of transitional components …

Go to article

Discovery And Generation Mechanisms Of Epigenetic Biogenic H2S From Coal Seams In The Fukang Block, Southern Junggar Basin, China, Yan Peipei, Su Xianbo, Zou Chenglong, Zhao Weizhong, Wang Lufei, Fu Haijiao Oct 2023

Discovery And Generation Mechanisms Of Epigenetic Biogenic H2S From Coal Seams In The Fukang Block, Southern Junggar Basin, China, Yan Peipei, Su Xianbo, Zou Chenglong, Zhao Weizhong, Wang Lufei, Fu Haijiao

Coal Geology & Exploration

In the Fukang block located in the eastern part of the southern Junggar Basin, coalbed methane (CBM) from CBM wells exhibits a gradually increasing H2S concentration in the process of CBM production via water drainage, severely threatening production safety. Based on the CBM exploration and extraction data, as well as the anaerobic fermentation experiments, this study preliminarily investigated the causes of abnormal H2S concentrations during the CBM production in the Fukang block. As indicated by the gas content test in the CBM exploration stage, the original CBM showed a low H2S concentration of only …

Go to article

A New Physics-Informed Method For The Fracability Evaluation Of Shale Oil Reservoirs, Li Yuwei, Li Zijian, Shao Lifei, Tian Fuchun, Tang Jizhou Oct 2023

A New Physics-Informed Method For The Fracability Evaluation Of Shale Oil Reservoirs, Li Yuwei, Li Zijian, Shao Lifei, Tian Fuchun, Tang Jizhou

Coal Geology & Exploration

The accurate evaluation of reservoir fracability is an essential prerequisite for the fracturing design and post-fracturing productivity evaluation of reservoirs. Rock mechanical parameters have been applied to the fracability evaluation of shales presently, exhibiting great field application performance. Accordingly, it is crucial to obtain accurate rock mechanical parameters. This study developed a physics-informed neural network (PINN) model. Driven by data and physical information, the PINN model can accurately predict rock mechanical parameters using only a small amount of data. To verify its performance, the PINN model was compared with the artificial neural network, random forest, and XGBoost models. The comparison …

Go to article

Numerical Simulations And Wavefield Analysis Of In-Seam Wave Advance Detection In Viscoelastic Media, He Dixiu, Ji Guangzhong, Jiao Wenjie, Zhang Yawei, Yu Kun Oct 2023

Numerical Simulations And Wavefield Analysis Of In-Seam Wave Advance Detection In Viscoelastic Media, He Dixiu, Ji Guangzhong, Jiao Wenjie, Zhang Yawei, Yu Kun

Coal Geology & Exploration

In-seam waves are commonly applied to the advance detection of hidden faults in front of mining faces. However, coal seams, which have viscoelasticity actually, imposing absorptive and attenuation effects on in-seam waves. To investigate the wave field characteristics and propagation patterns of in-seam waves in viscoelastic coal seam media, this study built a three-dimensional geological model of coal measures with faults based on Kelvin-Voigt’s first-order velocity-stress equation. Using this equation, three-dimensional finite-difference numerical simulation was carried out. The results indicate that (1) for reflected in-seam waves in viscoelastic media, which exhibit high energy attenuation, their propagation and attenuation characteristics are …

Go to article

Prediction Of Rockburst Intensity Grade Based On Convolutional Neural Network, Li Kangnan, Wu Yaqin, Du Feng, Zhang Xiang, Wang Yiqiao Oct 2023

Prediction Of Rockburst Intensity Grade Based On Convolutional Neural Network, Li Kangnan, Wu Yaqin, Du Feng, Zhang Xiang, Wang Yiqiao

Coal Geology & Exploration

Rockburst is one of the urgent problems to be addressed in the process of deep resource extraction. In order to predict the rockburst disasters safely and efficiently, a rockburst intensity grade prediction model (MICE-CNN) based on the Multiple Imputation by Chained Equations (MICE) and Convolutional Neural Network (CNN) was proposed. Specifically, a predictive indicator system was established based on the main influencing factors and the acquisition conditions of rockburst. A total of 120 sets of raw data from rockburst cases were collected, with the outliers processed by pauta criterion. Then, the missing data were interpolated with the four interpolation models …

Go to article

Effect Of Priming And Explosive Initiation Location On Pull In Hard Rock Underground Mine, K.K. Rao, B.S. Choudhary Oct 2023

Effect Of Priming And Explosive Initiation Location On Pull In Hard Rock Underground Mine, K.K. Rao, B.S. Choudhary

Journal of Sustainable Mining

In the development of hard rock mines, achieving maximum pull after blasting plays a crucial role. Various machines have been developed for rock cutting, but still, due to flexibility and cost-effectiveness, drilling and blasting are preferred. To enhance the effectiveness of this method, several techniques have been developed, including the use of appropriate stemming material, double-primer placement, selecting optimal initiation locations, improving blast designs, and exploring stress superposition techniques through electronic detonators. This research paper focuses on investigating the effect of the priming and explosive initiation location on pull through an experimental approach. The study specifically examines the influence of …

Go to article

Open-Cast Mining Deformations Monitoring Using Sentinel-1 Sar Data (Sbas Technique), Mahvash Naddaf Sangani, Seyed Reza Hosseinzadeh, José Francisco Martín Duque, Mahnaz Jahadi Toroghi, Kapil Kumar Malik Sep 2023

Open-Cast Mining Deformations Monitoring Using Sentinel-1 Sar Data (Sbas Technique), Mahvash Naddaf Sangani, Seyed Reza Hosseinzadeh, José Francisco Martín Duque, Mahnaz Jahadi Toroghi, Kapil Kumar Malik

Journal of Sustainable Mining

Land surface deformation created by mining activities can have negative impacts on the environment. Measuring them can be a tool for managing the environmental impacts of mining. Synthetic Aperture Radar Interferometry is a remote sensing method for measuring deformations. The main aim of this research is to investigate the deformation phenomenon on a region scale and extend our understanding of it to all mining deformation areas across the country. This paper used Small Baseline Subset Interferometric Synthetic Aperture Radar technology to obtain deformations information in the Sangan mine based on mining activities. We used 48 scenes of Single Look Complex(SLC) …

Go to article

Numerical Modelling Of Uniaxial Compressive Strength Laboratory Tests, Phu Minh Vuong Nguyen, Andrzej Walentek, Petr Waclawik, Kamil Soucek, Michał Antoniuk Sep 2023

Numerical Modelling Of Uniaxial Compressive Strength Laboratory Tests, Phu Minh Vuong Nguyen, Andrzej Walentek, Petr Waclawik, Kamil Soucek, Michał Antoniuk

Journal of Sustainable Mining

In the last decades, numerical modelling has been widely used to simulate rock mass behaviour in geo-engineering issues. The only disadvantage of numerical modelling is the reliability of required input data (e.g. mechanical parameters), which is not always fully provided due to the complexity of rock mass, project budget, available test methods or human errors. On the other hand, it was proven in many cases that numerical modelling is a helpful tool for solving such complex problems, especially when coupled with the results of laboratory and in-situ tests. This paper presents an attempt to determine the proper numerical constitutive model …

Go to article

Multi-Criteria Analysis Of The Possibility Of Retrofitting The System Of Rainwater Drainage From Subsidence Basins In A Liquidated Mine, Andrzej Chmiela, Małgorzata Wysocka, Adam Smoliński Sep 2023

Multi-Criteria Analysis Of The Possibility Of Retrofitting The System Of Rainwater Drainage From Subsidence Basins In A Liquidated Mine, Andrzej Chmiela, Małgorzata Wysocka, Adam Smoliński

Journal of Sustainable Mining

Mine closure is the natural final stage of mining activity. The process of financing mine liquidation is complex and expensive. The many years of conducted hard coal extraction affect the surface height differences. Analyses of the shifts in hydrogeological conditions and water hazard states in mining plants led to legal regulation adaptations, primarily in terms of hydrogeological documentation preparation, and made it necessary to conduct work concerning new options for water hazard assessment and prevention. Current subjects of particular interest include shifts in terrain morphology and the water regime, resulting in periodic flooding and permanent flooding of the most depressed …

Go to article

Intelligent Optimization And Control Technology For Drilling Process Of Coal Mine Tunnels, Yao Ningping, Wu Min, Chen Luefeng, Lu Chengda, Fan Haipeng, Zhang Youzhen, Li Wangnian, Yao Ke Sep 2023

Intelligent Optimization And Control Technology For Drilling Process Of Coal Mine Tunnels, Yao Ningping, Wu Min, Chen Luefeng, Lu Chengda, Fan Haipeng, Zhang Youzhen, Li Wangnian, Yao Ke

Coal Geology & Exploration

The harsh environment for drilling construction of coal mine tunnel, complex coal seam structure and complicated operation procedures can cause low drilling efficiency and high drilling cost. For this reason, it is imperative to carry out studies on the optimization and control technology for the drilling process of coal mine tunnel. Herein, study was conducted from intelligent identification of lithology of coal-bearing formation, intelligent optimization of drilling parameters and their intelligent control, focusing on the key technology for control of drilling process of coal mine tunnel. First, in order to accurately determine the type of coal-bearing formation, an intelligent identification …

Go to article

Research Status And Development Trend Of Near-Bit Mwd In Underground Coal Mine, Hao Shijun, Chu Zhiwei, Li Quanxin, Fang Jun, Chen Long, Liu Jianlin Sep 2023

Research Status And Development Trend Of Near-Bit Mwd In Underground Coal Mine, Hao Shijun, Chu Zhiwei, Li Quanxin, Fang Jun, Chen Long, Liu Jianlin

Coal Geology & Exploration

Near-bit meusurement while drilling (MWD) integrates several key technologies such as near-bit multi-parameter measurement, power supply and communication across positive displacement motor drills, turbine continuous power generation and high-speed mud pulse wireless transmission, capable of obtaining various types of parameters near the bit. It is one of the key components of intelligent drilling technology in underground coal mine. Herein, the limitation of the existing technology applied in coal mine was analyzed with full reference to the development experience and development path of near-bit MWD in the field of surface oil and gas drilling. Meanwhile, the research idea of near-bit MWD …

Go to article

Magnetic Beacon-Based Horizontal Directional Drilling Guidance Technology, Zu Yutong, Wang Lu, Gong Da, Hu Yuanbiao Sep 2023

Magnetic Beacon-Based Horizontal Directional Drilling Guidance Technology, Zu Yutong, Wang Lu, Gong Da, Hu Yuanbiao

Coal Geology & Exploration

In order to solve the problems of existing horizontal directional drilling (HDD) guidance methods, including low measurement accuracy, shallow positioning distance, discontinuous measurement data and great interference by magnetic field, a magnetic beacon-based horizontal directional drilling guidance and positioning method was proposed to achieve the position and attitude measurement of HDD. Meanwhile, a measurement array based on the third-order magnetic gradient tensor was designed, which verifies through simulation that the method could eliminate the influence of the geomagnetic fields and achieve the position measurement. In order to improve the attitude measurement accuracy, the multisource data fusion was performed with MEMS …

Go to article

First Prev Next Last