Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Electro-Mechanical Systems (5)
- Nanoscience and Nanotechnology (3)
- Physical Sciences and Mathematics (3)
- Aerospace Engineering (2)
- Civil and Environmental Engineering (2)
-
- Computer-Aided Engineering and Design (2)
- Electrical and Computer Engineering (2)
- Manufacturing (2)
- Materials Science and Engineering (2)
- Polymer and Organic Materials (2)
- Structural Engineering (2)
- Applied Mathematics (1)
- Earth Sciences (1)
- Electrical and Electronics (1)
- Electromagnetics and Photonics (1)
- Energy Systems (1)
- Environmental Sciences (1)
- Geophysics and Seismology (1)
- Heat Transfer, Combustion (1)
- Natural Resources Management and Policy (1)
- Natural Resources and Conservation (1)
- Oil, Gas, and Energy (1)
- Ordinary Differential Equations and Applied Dynamics (1)
- Structures and Materials (1)
- Institution
Articles 1 - 23 of 23
Full-Text Articles in Mechanical Engineering
Development Of Mems-Based Corrosion Sensor, Feng Pan
Development Of Mems-Based Corrosion Sensor, Feng Pan
Graduate Theses and Dissertations
This research is to develop a MEMS-based corrosion sensor, which is used for monitoring uniform, galvanic corrosion occurring in infrastructures such as buildings, bridges. The corrosion sensor is made up of the composite of micro/nano metal particles with elastomers. The mechanism of corrosion sensor is based on the mass transport of corrosive species through the sensor matrix. When the metal particles in the matrix corrode, the electrical resistivity of the material increases due to increasing particle resistances or reduction of conducting pathways. The corrosion rate can be monitored by detecting the resistivity change in sensing elements. The life span of …
Silica Nanoparticle-Based Coatings With Superhydrophilic And Superhydrophobic Properties, Robert Andrew Fleming
Silica Nanoparticle-Based Coatings With Superhydrophilic And Superhydrophobic Properties, Robert Andrew Fleming
Graduate Theses and Dissertations
Superhydrophilic and superhydrophobic surfaces have potential for implementation into a variety of fields, including self-cleaning surfaces, anti-fogging transparent materials, and biomedical applications. In this study, sandblasting, oxygen plasma treatments, silica nanoparticle films, and a low surface energy fluorocarbon film were employed to change the natural surface wettability of titanium, glass, and polyethylene terephthalate (PET) substrates, with an aim to produce superhydrophilic and superhydrophobic behavior. The effects of these surface modifications are characterized by water contact angles (WCAs), surface wetting stability, surface morphology and roughness, surface elemental composition, and optical transmittance measurements. The results show that stable superhydrophilic and superhydrophobic surfaces …
Distribution Map Of Multi-Walled Carbon Nanotubes In A Refrigerant/Oil Mixture Within A 2.5 Ton Unitary Air-Conditioner, Warren Russell Long
Distribution Map Of Multi-Walled Carbon Nanotubes In A Refrigerant/Oil Mixture Within A 2.5 Ton Unitary Air-Conditioner, Warren Russell Long
Graduate Theses and Dissertations
In recent years, nanoparticles have received considerable attention as a potential additive to heat transfer fluids (i.e. refrigerant) in order to increase the heat transfer capabilities of these fluids. The potential of carbon nanotubes (CNTs) to exit the compressor, migrate throughout a vapor compression air conditioning system, and possibly foul the components of such a system was experimentally investigated in this research. Six grams of CNTs were dispersed in the polyol ester oil used by a 2.5 ton (8.79 kW) unitary air conditioning system, which was continuously operated for 168 hours. After this time, the unit was shut down and …
Computational Design Of The Electrical And Mechanical Performance Of Steerable Mems Antennas, Morgan Andrew Roddy
Computational Design Of The Electrical And Mechanical Performance Of Steerable Mems Antennas, Morgan Andrew Roddy
Graduate Theses and Dissertations
This thesis describes the origins, improvements, and variations of a broadband microwave antenna that can be beam-steered by a micro-electromechanical system (MEMS). The steerable MEMS antenna of this work was comprised of a planar antenna on top of a Silicon membrane. The membrane is etched to create a gimbal hinge structure and a platform which supported the antenna and gave it one or two degrees of freedom of rotation. The antennas presented were broadband and fed by a coplanar waveguide (CPW) transmission line which traversed the hinge structure. The antenna's orientation in space was designed to be changed through electrostatic …
Improving The Mechanical Properties Of Polymers By Adding Self-Healing Capabilities, Alma Perez
Improving The Mechanical Properties Of Polymers By Adding Self-Healing Capabilities, Alma Perez
Theses and Dissertations - UTB/UTPA
The addition of self-healing capabilities to polymers through the dispersion of First Generation Grubbs’ Catalyst (FGGC) and poly(urea-formaldehyde) (PUF) microcapsules filled with dicyclopentadiene (DCPD) as the healing agent, has been investigated by various experimental techniques such as Optical microscopy, Scanning Electron Microscopy, Tensile tests, Raman Spectroscopy, and Themogravimmetric Analysis (TGA). Optical and Scanning Electron Microscopy revealed the morphology of the surface of the PUF microcapsules, the diameter size distribution and the thickness of the shell, and their structure when dispersed in the polymeric matrices. Photos taken after the tensile test showed broken microcapsules on both polymer matrices having released the …
Design, Fabrication, Testing Of Cnt Based Isfet And Characterization Of Nano/Bio Materials Using Afm, Zhuxin Dong
Design, Fabrication, Testing Of Cnt Based Isfet And Characterization Of Nano/Bio Materials Using Afm, Zhuxin Dong
Graduate Theses and Dissertations
A combination of Carbon Nanotubes (CNTs) and Ion Selective Field Effect Transistor (ISFET) is designed and experimentally verified in order to develop the next generation ion concentration sensing system. Micro Electro-Mechanical System (MEMS) fabrication techniques, such as photolithography, diffusion, evaporation, lift-off, packaging, etc., are required in the fabrication of the CNT-ISFET structure on p-type silicon wafers. In addition, Atomic Force Microscopy (AFM) based surface nanomachining is investigated and used for creating nanochannels on silicon surfaces. Since AFM based nanomanipulation and nanomachining is highly controllable, nanochannels are precisely scratched in the area between the source and drain of the FET where …
Control Charts For First Order Autoregressive Analysis With An Exogenous Variable, Becky M. Vela
Control Charts For First Order Autoregressive Analysis With An Exogenous Variable, Becky M. Vela
Theses and Dissertations - UTB/UTPA
There are many instances in industry, where the necessity of prediction models is extremely important. However, the difficulty of forecasting increases with the number of variables involved, and determining independent variables from dependent variables. Autocorrelation is one of the most common causes for many control charts and other quality measurement tools to falsely signal an error in the process. Time series models, such as autoregressive models, accommodate autocorrelated data to a certain extent. However, using a model that only analyzes historical data alone does not possess the accuracy necessary to be able to forecast data precisely. An addition of an …
Fabrication And Characterization Of Polylactic Acid And Polylactic Acid/Multi-Walled Carbon Nanotube Nanofibers Through Centrifugal Spinning, Richard Patlan
Fabrication And Characterization Of Polylactic Acid And Polylactic Acid/Multi-Walled Carbon Nanotube Nanofibers Through Centrifugal Spinning, Richard Patlan
Theses and Dissertations - UTB/UTPA
Biocompatible polymer nanofibers hold great potential in the biomedical engineering field. Their biodegradable nature and enhanced properties could help solve a wide array of health related problems, particularly in the areas of tissue regeneration, drug delivery, and biosensor design. The novel ForcespinningTM method allows the production of submicron fibers without many of the drawbacks found in electrospinning, while also providing a substantial increase in fiber production. The aim of the study was to utilize this method to fabricate non-woven nanofibrous mats composed of polylactic acid (PLA) and polylactic acid/multi-walled carbon nanotube composite fibers. The morphology, thermal properties, and crystalline structure …
Defect Detection In Railroad Tapered-Roller Bearings Using Vibration Analysis Techniques, Iris L. Alvarado
Defect Detection In Railroad Tapered-Roller Bearings Using Vibration Analysis Techniques, Iris L. Alvarado
Theses and Dissertations - UTB/UTPA
Derailments can often lead to great damage, loss of lives, and massive costs associated with the railroad infrastructure. A significant cause of derailments is premature bearing failure, and therefore bearing condition-monitoring systems that can detect developing defects are of great importance. Based on an investigation conducted at the University of Texas-Pan American on the development of a vibration and temperature monitoring system, an algorithm is devised utilizing various vibration analysis techniques. The proposed algorithm determines whether a bearing is defective, the type of defect present, the defective component (i.e. cup, cone, or roller), and the size of the defect. Speed-dependent …
Development Of A Vibration And Temperature Measurement Device For Railroad Bearings, Andrea P. Arguelles
Development Of A Vibration And Temperature Measurement Device For Railroad Bearings, Andrea P. Arguelles
Theses and Dissertations - UTB/UTPA
Bearing related derailments cause very high cost and inconvenience to the railroad industry. Various wayside detection systems have been implemented to assess bearing condition and prevent premature failure. However, current devices fail to determine the internal condition of bearings or provide insight regarding the danger and severity of defects and abnormalities that may be present. To this end, a device combining both temperature and vibration detection was designed to be embedded in railroad bearing adapters. In order to efficiently design a railroad bearing condition-monitoring system, two factors that must be considered are the capabilities available to operate the different sensors …
Development Of Algorithms And Criteria For Continuous Condition Monitoring Of Railroad Bearings, Sean Michael Woods
Development Of Algorithms And Criteria For Continuous Condition Monitoring Of Railroad Bearings, Sean Michael Woods
Theses and Dissertations - UTB/UTPA
This thesis summarizes research conducted at the University of Texas-Pan American to investigate the implementation of condition monitoring algorithms for use with railway roller bearings equipped with wireless temperature sensor nodes. Current temperature based condition monitoring techniques utilize wayside detection equipment intermittently located along the track to garner sporadic bearing cup temperatures. Such devices are not capable of detecting brief transient temperature trending events. The developed algorithms were tested using a fleet of ten railway freight cars instrumented with wireless sensor nodes and operated by an Australian freight transportation company. Eighteen months of continuous monitoring combined with the inspection of …
A Case Study For Financial Feasibility Of Automated Costing Support In A Small Machine Shop, Benito A. Gonzalez
A Case Study For Financial Feasibility Of Automated Costing Support In A Small Machine Shop, Benito A. Gonzalez
Theses and Dissertations - UTB/UTPA
A knowledge-based cost estimating expert system is chosen by a Mexican machine shop. Differences between the traditional experience-based system employed and the automated system are studied. Data is gathered to analyze time effectiveness, accuracy and payback of the software. Data from seventy part models is recorded to study the time experiment, and data from fifty part models is used to study the accuracy and consistency. Data is analyzed by calculating mean, standard deviation, and test of hypothesis. The results indicate that the software is faster than the traditional quoting system; however, the payback point is high. Also, results show the …
Electromagnetic Interference Shielding Effectiveness Of Metallic Thin Films Deposited On High Density Polyethylene And Styrene Butadiene Copolymer Reinforced With Carbon Nanofibers, Horus Garcia
Theses and Dissertations - UTB/UTPA
Aluminum, Copper and Silver were deposited by thermal evaporation onto Vapor Grown Carbon Nanofiber (VGCNF) reinforced High Density Polyethylene (HDPE) and Styrene Butadiene Copolymer (SBC) composites. Electromagnetic Interference Shielding Effectiveness (EMI SE) was conducted on the structures to analyze the synergistic effect. Characterization was performed by Scanning Electron Microscopy, X-ray Diffraction, and Atomic Force Microscopy. Adhesion test and surface influence on SE were also performed. It was observed that a single layer metallic thin film on carbon nanofiber (CNF) polymer composite experienced a summation of shielding performance. The EMI SE increased with CNF content increase of 10, 15, and 20 …
Load Sensor In An Elastomer Suspension Element, Jazmin Ley
Load Sensor In An Elastomer Suspension Element, Jazmin Ley
Theses and Dissertations - UTB/UTPA
Knowledge of the loading applied to railcar suspension elements is necessary for improved rail safety, efficiency, and for monitoring bearing health. An economical, reliable system for keeping track of both dynamic and static loads on a rail car bearing offers potential for many improvements in rail service. The difficulties of implementing such a system are considerable because the sensor must be in the bearing load path and is thus subject to all the stressors of that environment including high impact, high load, high temperature, and corrosion. This thesis describes an attempt to incorporate a load measurement system in a polyurethane …
Remanufacturing Cleaning Process Evaluation, Comparison And Planning, Ozan Yagar
Remanufacturing Cleaning Process Evaluation, Comparison And Planning, Ozan Yagar
Theses and Dissertations - UTB/UTPA
This thesis aims to combine previous research on remanufacturing cleaning processes and applications into a single decision-making tool, in the form of software, which a remanufacturer can use to find a cleaning system that matches their specific demands. This thesis will provide an in-depth review of each cleaning process, the chemicals used in those processes, and the contamination types for which they were developed. This research also provides evaluation and comparison that assists remanufacturers in designing their cleaning systems. Finally, there will be a description and demonstration of the software. The ultimate goal is to find correct cleaning process to …
2d Modeling Of Forcespinning™ Nanofiber Formation With Experimental Study And Validation, Simon Padron
2d Modeling Of Forcespinning™ Nanofiber Formation With Experimental Study And Validation, Simon Padron
Theses and Dissertations - UTB/UTPA
A newly developed method of producing nanofibers, called Forcespinning™, has proven to be a viable alternative to mass produce nanofibers. Forcespinning™ utilizes centrifugal forces which allow for a host of new materials to be processed into nanofibers while also providing a significant increase in yield and ease of production. To improve and enhance the Forcespinning™ production method, a 2D computational Forcespinning™ fluid dynamics model is developed. Three computer models, namely time-independent and time-dependent inviscid models and a viscous model are obtained and the influences of various parameters on Forcespinning™ fiber formation are obtained. This work also presents a detailed explanation …
The Influence Of Non-Equilibrium Pressure On Rotating Flows, Irfan Rashid Zardadkhan
The Influence Of Non-Equilibrium Pressure On Rotating Flows, Irfan Rashid Zardadkhan
Mechanical & Aerospace Engineering Theses & Dissertations
This study was undertaken to investigate the influence of pressure relaxation on steady, incompressible flows with strong streamline curvature. In the early part of this dissertation research, the significance of non-equilibrium pressure forces in controlling the structure of a steady, two dimensional axial vortex was demonstrated. In order to extend the study of pressure relaxation influences on more complex rotating flows, this dissertation has examined other rotating flow features that can be associated with hurricanes, tornadoes and dust devils. To model these flows, modified boundary layer equations were developed for a fluid column rotating near a solid plane including the …
Production And Characterization Of Biodegradable Nanofibers Via Forcespinning™ Technology, Zachary T. Mceachin
Production And Characterization Of Biodegradable Nanofibers Via Forcespinning™ Technology, Zachary T. Mceachin
Theses and Dissertations - UTB/UTPA
Among the myriad of methods for polymer nanofiber production, there are only a few methods that can produce submicron range fibers in bulk from melt or solution samples. The Forcespinning™ method allows a substantial increase in sample yield; this greatly reduces the time needed to produce bulk quantities of fibers which may be critical in many fields of research and industry, in particularly in fields relating to biopolymers. The aim of the first study was to utilize this method to form non-woven mats of polycaprolactone (PCL) nanofibers and to quantitatively analyze the production and characterization of the produced fibers. The …
Computer Modeling Of The Influence Of Structure Plan Areas On Tornado Forces, Nashmi Hassan M Alrasheedi
Computer Modeling Of The Influence Of Structure Plan Areas On Tornado Forces, Nashmi Hassan M Alrasheedi
Graduate Theses and Dissertations
The study of the conventional Straight Line (SL) wind flow dominates research into wind loads on structures. Most structure design takes into account only research into SL flow. Few researchers have studied tornado forces on buildings and attempted to distinguish between tornadic wind loads and SL flow loads. Using a computer simulation, this research addresses and distinguishes between the tornadic forces and SL forces on structures. In the numerical simulation, tornado forces and SL forces will be compared on large structure plan areas and on thin structure plan areas. Additionally this research investigates how the increase in the vortex strength …
Design And Implementation Of A Small Electric Motor Dynamometer For Mechanical Engineering Undergraduate Laboratory, Aaron Farley
Design And Implementation Of A Small Electric Motor Dynamometer For Mechanical Engineering Undergraduate Laboratory, Aaron Farley
Graduate Theses and Dissertations
This thesis set out to design and implement a new experiment for use in the second lab of the laboratory curriculum in the Mechanical Engineering Department at the University of Arkansas in Fayetteville, AR. The second of three labs typically consists of data acquisition and the real world measurements of concepts learned in the classes at the freshman and sophomore level. This small electric motor dynamometer was designed to be a table top lab setup allowing students to familiarize themselves with forces, torques, angular velocity and the sensors used to measure those quantities, i.e. load cells and optical encoders. The …
Design Of Orbital Maneuvers With Aeroassisted Cubesatellites, Stephanie Clark
Design Of Orbital Maneuvers With Aeroassisted Cubesatellites, Stephanie Clark
Graduate Theses and Dissertations
Recent advances within the field of cube satellite technology has allowed for the possible development of a maneuver that utilizes a satellite's Low Earth Orbit (LEO) and increased atmospheric density to effectively use lift and drag to implement a noncoplanar orbital maneuver. Noncoplanar maneuvers typically require large quantities of propellant due to the large delta-v that is required. However, similar maneuvers using perturbing forces require little or no propellant to create the delta-v required. This research reported here studied on the effects of lift on orbital changes, those of noncoplanar types in particular, for small satellites without orbital maneuvering thrusters. …
Energy Consumption And Greenhouse Gas Emissions From Commercial And Manufacturing Sectors Specific Studies On Hvac Equipment And Dairy Processing, Aik Jong Tan
Graduate Theses and Dissertations
Commercial and manufacturing sectors in United States consumed approximately 50% of the total End use energy in 2010. In 2009, 81.5% of the greenhouse gas (GHG) emitted in the United States was energy related. From the broad aspects of commercial and manufacturing sectors; two relatively narrow and specific topics, commercial building's HVAC equipment and dairy processing were chosen to increase the understanding of the energy use and GHG emission in these two sectors. Few published studies related to these two specific areas are available. The first study in this thesis discussed the energy use and GHG emissions by HVAC equipment …
Implementation Of Wireless Temperature Sensors For Continuous Condition Monitoring Of Railroad Bearings, Andoni Zagouris Ii
Implementation Of Wireless Temperature Sensors For Continuous Condition Monitoring Of Railroad Bearings, Andoni Zagouris Ii
Theses and Dissertations - UTB/UTPA
At present there are no existing bearing health monitoring systems capable of continuous monitoring of railroad bearings. Current wayside equipment is used to collect intermittent bearing temperatures, which at times could be every 65 km (~40 mi). To answer this need, IONX, LLC, a subsidiary of Amsted Rail, Inc., has developed low power Wireless Sensor Nodes (WSNs) which can be retrofitted to existing bearing adapters. The WSNs provide continuous monitoring of bearing temperatures as well as the current ambient temperature. Since the nodes are affixed to the bearing adapter surface, a correlation is necessary to estimate the bearing cup temperature …