Mechanical Engineering Commons^™

Investigation Of Thermofluid Processes In A Pcm Based Thermal Storage Module, Luca M. Crnjac

Electronic Thesis and Dissertation Repository

Latent heat thermal energy storage systems can capture and store solar thermal energy, enhancing the reliability of solar energy by facilitating a continuous and consistent energy supply. However, phase change materials used in these systems suffer from low thermal conductivities making it difficult to achieve suitable charging and discharging rates. The present research investigated this issue using computational and experimental approaches to improve the design of a thermal storage module through heat transfer enhancement. Various heat transfer enhancements including a finned honeycomb structure, and metal wool were incorporated into a thermal storage module to analyze their effect on charging and …

Characterizing Tkr Biomechanics Using A Novel Muscle-Driven Joint Motion Simulator, Alexandre Galley

Electronic Thesis and Dissertation Repository

Total knee replacement (TKR) is the end-stage treatment for severe cases of knee osteoarthritis (OA). Despite its success in alleviating pain and restoring mobility to the knee, patient satisfaction rates post-TKR are still lower than other common joint replacement surgeries. Knee kinematics and stability, key determinants of successful TKR, are assessed intraoperatively and tracked post-operatively in in vivo clinical studies. However, the persistently low satisfaction rates suggest that more sophisticated pre-clinical testing methods are needed to better understand the biomechanics of these implants early in their development. During pre-clinical testing of TKR implants, different joint motion simulators are used for …

Study Of Multi-Dimensional Transfer Effects In Applied Smouldering Systems, Seyed Ziaedin Miry Mr

Electronic Thesis and Dissertation Repository

Smouldering is a flameless form of combustion that is driven by oxygen directly diffusing into the surface of condensed phase fuel (liquid or solid) and involves a complex interplay between heat and mass transfer through porous media, chemical reactions, and multiphase flow. Applied smouldering systems have been gaining popularity for a variety of applications including (i) energy and resource recovery, (ii) waste-to-energy, (iii) pyrolysis and gasification, and (iv) applied smouldering of organic liquids/solids for environmental benefits. In all contexts, smouldering is a complicated oxygen-limited phenomenon where multi-dimensional transfer effects (i.e., non-uniformities in …

Understanding Real-World And Laboratory Traumatic Brain Injury (Tbi) Using The Computational Model With Brain Functional Regions, Kewei Bian

Electronic Thesis and Dissertation Repository

Traumatic brain injury (TBI), including mild traumatic brain injury (mTBI) or concussion, is a severe health concern. Many symptoms, such as headache, dizziness, and working memory deficits, are reported to be related to the dysfunction of brain functional regions, but the underlying mechanism remains unknown. Hence, further developing tools and analyses to understand brain dysfunction for better TBI prevention are important. Additionally, such analyses should be conducted for both real-world TBI cases and laboratory studies, as TBI data can only be collected from the real world, and prevention measures, such as helmets, are developed and evaluated in the lab. Accordingly, …

Performance Recovery Of Scale Reduced Cyclone Particle Separators Using A Rotating Classifier, Mark J. Parker

Electronic Thesis and Dissertation Repository

Cyclone particle separators are often used to collect particles that are of value or environmental concern. These devices achieve high Total Collection Efficiency (TCE) with steady pressure drop. Increasing the height of the cyclone improves both TCE and pressure drop. However, due to the height of the cyclone, these devices are often forced to be placed outside, which can lead to decreased performance over time. The research examines the outcome of scale reducing a cyclone. This is achieved by (i) how the scale reduction changes the flow field, (ii) identifying what flow aspects contribute to the reduction in TCE and …

An Investigation Into Computational Modelling Of Melting And Solidification Of Phase Change Materials, Maryam Hemmat

Electronic Thesis and Dissertation Repository

This thesis evaluates the effectiveness of the enthalpy-porosity approach in simulating melting and solidification of phase change materials within latent heat thermal energy storage systems. It systematically investigates the sensitivity of the computational model to four adjustable parameters: mushy zone coefficient, thermal expansion coefficient, solidus/liquidus temperatures, and latent heat. The study includes individual and combined analyses of these factors in simulations of the melting process by comparing outcomes with extensive experimental data, resulting in a calibrated melting model. The calibrated model is validated across various heating conditions in the cylindrical cavity, and then in a rectangular cavity, confirming its reliability …

Patterned Heating Induced Propulsion, Saajid A. Aman

Electronic Thesis and Dissertation Repository

This study explores propulsion effects generated by patterned heating acting on smooth and corrugated surfaces. The model problem assumes that the upper plate moves freely, and the lower plate is stationary, equipped with grooves, and exposed to spatially distributed heating. Our findings identify two distinct propulsion effects: thermal streaming and thermal drift. Thermal streaming occurs when given sufficient heating intensity with net flow in the left or right direction characterized by a pitchfork bifurcation. The efficiency of this technique can be controlled using the wavelength of heating. Thermal drift represents a pattern interaction effect. Its strength depends on the relative …

Head Impact Effects In Small Remotely Piloted Aircraft System (Srpas) Collisions: Gender Specific Risks And Vulnerable Population Protection, Md Farhan Hoque Sagar

Electronic Thesis and Dissertation Repository

This study focuses on supporting the development of safety regulations for vulnerable populations during drone to head impacts. First, the small female head and neck model was compared to cadaveric data. Then, combined with lab’s previous work, gender-based disparities in head impact responses were highlighted, with small females experiencing higher injury risk metrics, despite lower skull von Mises stress. Beyond small females, children of various ages and their head responses during impacts were also analyzed. In addition to the previously developed quadcopter drone model, a new Mavic Pro drone model was developed, and this model was integrated with human head …

Impinging Jet Flow And Hydraulic Jump Of Newtonian And Viscoplastic Liquids, Wenxi Wang

Electronic Thesis and Dissertation Repository

The steady laminar incompressible flow of an axisymmetric impinging jet of either a Newtonian fluid or a viscoplastic fluid of the Heschel-Bulkley type and the hydraulic jump of either a circular or polygonal shape on a solid disk is analyzed. The polygonal jump is induced by azimuthal dependence edge conditions: a non-circular disk or a circular disk with a variable edge film thickness. The thin-film and Kármán–Pohlhausen approaches are utilized as theoretical tools.

To cross the jump smoothly, a composite mean-field thin-film approach is proposed. The stress singularity for a film freely draining at the disk edge is found to …

Evaluating Eeg–Emg Fusion-Based Classification As A Method For Improving Control Of Wearable Robotic Devices For Upper-Limb Rehabilitation, Jacob G. Tryon

Electronic Thesis and Dissertation Repository

Musculoskeletal disorders are the biggest cause of disability worldwide, and wearable mechatronic rehabilitation devices have been proposed for treatment. However, before widespread adoption, improvements in user control and system adaptability are required. User intention should be detected intuitively, and user-induced changes in system dynamics should be unobtrusively identified and corrected. Developments often focus on model-dependent nonlinear control theory, which is challenging to implement for wearable devices.

One alternative is to incorporate bioelectrical signal-based machine learning into the system, allowing for simpler controller designs to be augmented by supplemental brain (electroencephalography/EEG) and muscle (electromyography/EMG) information. To extract user intention better, sensor …

Numerical Modeling And Simulation On Deformation And Failure Behaviors Of Polymeric Materials, Heng Feng

Electronic Thesis and Dissertation Repository

Featured by biocompatibility, high compliance and capacity in sustaining large deformation, dielectric elastomers (DEs) and hydrogels have gained extensive research popularity for their potential applications in the fields of soft robots, biomimetics, tissue engineering, drug delivery, and energy harvesting. The design of such soft and smart material-based devices and structures requires deep understanding and accurate simulation of their constitutive behaviors, which is challenged by their nonlinear material properties due to unique microstructures and multi-physics coupling. Meanwhile, in different application contexts, those structures are also susceptible to different failure modes, imposing further challenges in simulating and predicting their performance. To fulfill …

Experimental Investigation Of The Phase Change Process Within Circular Geometries, Kyle Teather

Electronic Thesis and Dissertation Repository

Latent heat thermal energy storage systems have many advantages over sensible-heat-based thermal storage systems, such as an increased energy density with a narrower range of operating temperatures. The main barrier to implementing latent heat storage systems is the low thermal conductivity of typical storage materials, called phase change materials (PCMs). Furthermore, the heat transfer mode in the liquid phase is natural convection, which is influenced by the geometry and orientation of the heat source and sink, thus impacting the phase change pattern and heat transfer. It is critical to have a good understanding of the underlying fundamental physics over the …

Mechanical Response Of The Craniofacial Skeleton To Subfracture Impacts In The Time And Frequency Domains, Paige Merko

Electronic Thesis and Dissertation Repository

Resonant frequencies have been suggested as a mechanism of brain injury since these vibrations can transfer energy into the brain. Study of the vibrational response of the craniofacial skeleton to impact is limited in literature. In this research, four cadaver specimens were impacted at five locations on the craniofacial skeleton. The mechanical response to each impact was compared in the time and frequency domains. Impacts to the maxilla and its associated soft tissues tended to be attenuated, while impacts to the cranial vault, specifically to the occipital, produced the most severe response. Results suggest that the facial skeleton and its …

Using Statistics, Computational Modelling And Artificial Intelligence Methods To Study And Strengthen The Link Between Kinematic Impacts And Mtbis, Andrew Luke Mcconnell Patterson

Electronic Thesis and Dissertation Repository

Mild traumatic brain injuries (mTBIs) are frequently occurring, yet poorly understood, injuries in sports (e.g., ice hockey) and other physical recreation activities where head impacts occur. Helmets are essential pieces of equipment used to protect participants’ heads from mTBIs. Evaluating the performance of helmets to prevent mTBIs using simulations on anatomically accurate computational head finite element models is critically important for advancing the development of safer helmets. Advancing the level of detail in, and access to, such models, and their continued validation through state-of-the-art brain imaging methods and traditional head injury assessment procedures, is also essential to improve safety. The …