Mechanical Engineering Commons^™

Isolation And Characterization Of Caffeine-Degrading Bacteria From Coffee Plantation Areas In Malaysia, Elvina Clarie Dullah, Mohd Fazli Farida Asras

Makara Journal of Technology

Decaffeination by microbial degradation is currently the most optimal and low-cost approach, involving only microbial cells and/or their enzymes. The bacterium was characterized using a series of biochemical tests. Positive results were obtained from carbohydrate fermentation, citrate utilization, and catalase tests, while negative results were obtained from Voges-Proskauer (VP) and indole tests. Three different caffeine concentrations of 0.25%, 0.4%, and 2% were tested and measured through Gas Chromatography-Mass Spectrophotometry (GC-MS) analysis. The highest caffeine reduction (89.25%) was found when 0.25% caffeine was used in the media. Only a small amount of caffeine was reduced to 0.4% and 2%, with 34.78% …

Optimization Of The Building Envelope And Roof Shading To Reduce The Energy Consumption Of College Low-Rise Buildings In Indonesia, Nasruddin Nasruddin, Azimil Gani Alam, Mohammad Imroz Sohel

Makara Journal of Technology

Energy consumption in buildings is a crucial concern globally, prompting researchers to explore innovative solutions to mitigate its impact. This study investigates the optimization of building envelopes and roof shading systems of existing buildings in Indonesia to realize notable energy savings. Multiple scenarios were explored, with modifications to building envelopes and roof shading, highlighting the overall thermal transfer value as a key parameter. Using EnergyPlus simulations, the efficacy of natural ventilation in corridors and roof shading modifications was assessed in reducing energy consumption. The findings revealed that renovating existing buildings by optimization of the building envelope and roof shading by …

A Preliminary Study On Floating Flexible Otec Cold Water Pipe, Nai Kuang Liang, Hai Kuan Peng

Journal of Marine Science and Technology

Ocean Thermal Energy Conversion (OTEC) requires a large amount of cold seawater. The traditional rigid pipe, semi-rigidly fixed onto the ship bottom is not easy to install and disassemble, so the Floating Flexible Cold Water Pipe (FFCWP) flexibly connected to the ship is proposed. A small FFCWP was designed, fabricated, and successfully installed and recovered in the sea. The flexible pipe adopts commercially available fire ventilation snake pipe. The pipe wall material strength must be improved in the future. Assuming that the drag coefficient Cd value is 1.5, a numerical calculation is employed to simulate the FFCWP attitude from the …

Machine Learning With Multi-Source Data To Predict And Explain Marine Pilot Occupational Accidents, Gokhan Camliyurt, Youngsoo Park, Daewon Kim, Won Sik Kang, Sangwon Park

Journal of Marine Science and Technology

Marine pilot occupational accidents during transfer to/from ships are the primary concern of the International Marine Pilots’ Association (IMPA) and industry professionals. There are multiple transfer methods for marine pilots, with the most common being the pilot boat. To reach the mother ship bridge, the following stages must be safely completed: car transfer, walking on the pier, pier to pilot boat, pilot transfer by boat, cutter to pilot ladder, mother ship freeboard climbing, and ship deck to the bridge. Each stage has its own risk. Previous accident records and expert opinions are commonly used to conduct a risk analysis and …

Evaluation Of Operational Performance Of Wusongkou Cruise Port Through Network Data Envelopment Analysis, Qian-Feng Wang, Guo-Ya Gan, Xin-Liang Ye, Hsuan-Shih Lee

Journal of Marine Science and Technology

As major hubs for cruise berthing and passenger transfers, cruise ports in China were developing rapidly in the years before the COVID-19 pandemic because of an ever-growing regional market. Wusongkou Cruise Port is the most important port for cruise ships in China, and this study evaluated the operational performance of this port during 2011–2020. To this end, two-stage network data envelopment analysis was conducted to evaluate the port’s operation performance; subsequently, the change trajectory of the port’s operational efficiency during 2011–2020 was determined, and the potential reasons for the identified changes are discussed. Finally, suggestions for improving the operational performance …

Floating Offshore-Wind And Controls Advanced Laboratory Program: 1:70-Scale Testing Of A 15 Mw Floating Wind Turbine, Matthew J. Fowler

Electronic Theses and Dissertations

This thesis presents results from the Floating Offshore-wind and Controls Advanced Laboratory (FOCAL) Experiment which performed 1:70-scale model testing of a 15 mega-watt floating offshore wind turbine (FOWT) at the University of Maine’s Alfond Wind/Wave Ocean Engineering Laboratory (W2). The experimental campaigns supported the application of controls co-design to FOWTs by incorporating real-time wind turbine control and hull mounted tuned-mass damper (TMD) elements. A performance-matched scaling strategy was proposed and analysis in OpenFAST performed to design the scale models, including integration of the Reference OpenSource Controller (ROSCO) and modeling of the TMDs in the hull. Four test campaigns were conducted, …

A Review On Ship Recycling Industry In Bangladesh From Global Perspective, Ahammad Abdullah, Zobair Ibn Awal, M Ziauddin Alamgir, Md. Jobayer Mia, Farihatul Mim, Utpal K. Dhar

Journal of Ocean and Coastal Economics

At present, the global center of the ship breaking and recycling industry is in South Asia, specifically Bangladesh, India, and Pakistan. These three countries account for 70–80 percent of the international recycling market for ocean-going vessels, with China and Turkey covering most of the remaining market. Only about 5 percent of global volume is scrapped outside these five countries. Bangladesh has environmentally beneficial coastal region and affordable labor that make the shipbreaking and recycling business as a potential sector for the country. In addition, ship recycling and its related businesses are helping to solve our nation’s unemployment issues at all …

Maitreya Desalination, Riley Taft, Hudson Kispert, Brendan Dizon

Mechanical Engineering

This document relays the design and manufacture of a dual power input Reverse Osmosis desalination unit. It's power sources are electric drive and human power via recumbent seated cycling. Fresh water outputs range from 4 - 7 GPH for human power inputs of 150 - 280 Watts depending on the selected gearing ratio from the derailleur.

Deep Ocean Vehicle Applications And Modifications, Nichole "Nikki" T. Arm

Master's Theses

This project had two primary goals: (1) to explore opportunities to further a deep-ocean vehicle’s reach using alternative pressure spheres, and (2) to implement an existing deep-ocean vehicle (lander) in active scientific research.

I gained a greater understanding of the limitations and design choices made for existing pressure spheres using Finite Element Analysis (FEA). My simplified FEA model predicted sphere failure for the existing 30% Fiber Glass 70% Nylon injection molded spheres at an external pressure of 3,954psi or 2,690m ocean-depth (only a 7.38% error compared to the tested minimum failure depth), so I determined it a valid model. I …

Project Thetis: A Low-Cost, Low-Profile Inertial Data Logger, Braidan Duffy

Theses and Dissertations

This thesis details the design, testing, calibration, and verification of a nine degree of freedom inertial measurement data logger for use with floating bodies. The instrument was conceived to address limitations of equipment used in classes within the Ocean Engineering department at Florida Institute of Technology. By meeting with several stakeholders and end users, a series of stakeholder requirements, capabilities, and component-level requirements were de- veloped that informed the design constraints. There were several hardware iterations of the board, culminating in Revision F5 which was extensively tested and proven. The design was inspected after testing concluded to determine which capabilities …

Effects Of Perforations On Internal Cathodic Protection And Recruitment Of Marine Organisms To Steel Pipes, Alexander John Paluzzi

Theses and Dissertations

Steel monopile support structures for offshore wind turbines require protection from corrosion on their external and internal surfaces. Cathodic protection (CP) works effectively to protect the external surfaces of monopiles, but internally, byproducts from aluminum sacrificial anode CP (SACP) and impressed current CP (ICCP) induce acidification that accelerates steel corrosion. This project investigated the effects of perforations on the performance of aluminum SACP and ICCP when used inside of steel pipes. Additionally, marine growth on the external and internal surfaces of the pipes was assessed to determine if CP byproducts affect marine organism development.

Two sealed and two perforated steel …

Physics-Based Machine Learning Methods For Control And Sensing In Fish-Like Robots, Colin Rodwell

All Dissertations

Underwater robots are important for the construction and maintenance of underwater infrastructure, underwater resource extraction, and defense. However, they currently fall far behind biological swimmers such as fish in agility, efficiency, and sensing capabilities. As a result, mimicking the capabilities of biological swimmers has become an area of significant research interest. In this work, we focus specifically on improving the control and sensing capabilities of fish-like robots.

Our control work focuses on using the Chaplygin sleigh, a two-dimensional nonholonomic system which has been used to model fish-like swimming, as part of a curriculum to train a reinforcement learning agent to …

Underwater Image Enhancement: A Pipeline For Underwater Computer Visions, Humberto Lebron Rivera

Theses and Dissertations

Ocean exploration has surged in popularity and significance in recent years, including diverse areas like maritime archeology, underwater resources, and submerged structure inspection. The activities mentioned above heavily depend on vision and imagery, a challenge in the unpredictable marine world. This thesis presents a conditional generative adversarial network model for image-to-image translation problems. We designed and trained the model with the end goal of enhancing underwater images. Five metrics were employed for validation to quantify our model’s resulting enhanced images. By doing so, we aim to establish a pipeline that can leverage aerial computer vision algorithms for marine applications.

Our …

Reducing Uncertainty In Sea-Level Rise Prediction: A Spatial-Variability-Aware Approach, Subhankar Ghosh, Shuai An, Arun Sharma, Jayant Gupta, Shashi Shekhar, Aneesh Subramanian

I-GUIDE Forum

Given multi-model ensemble climate projections, the goal is to accurately and reliably predict future sea-level rise while lowering the uncertainty. This problem is important because sea-level rise affects millions of people in coastal communities and beyond due to climate change's impacts on polar ice sheets and the ocean. This problem is challenging due to spatial variability and unknowns such as possible tipping points (e.g., collapse of Greenland or West Antarctic ice-shelf), climate feedback loops (e.g., clouds, permafrost thawing), future policy decisions, and human actions. Most existing climate modeling approaches use the same set of weights globally, during either regression or …

Smart Sounding Table Using Adaptive Neuro-Fuzzy Inference System, Osman Ünal, Nuri Akkaş

Journal of Marine Science and Technology

Marine engineers measure the liquid level (sounding depth) to calculate the volumetric content of a ship's tank. The sounding depth is determined using an ullage pipe located at specific points on the tanks. To estimate the accurate volume of liquid, considering the ship's trim and heel conditions, engineers use a tank table (sounding table) consisting of hundreds of pages. However, this method is time-consuming and lacks intermediate values for sounding depth, trim, and heel. Ship designers recommend to use linear interpolation for intermediate values, yet this process is also time-consuming. This paper proposes the implementation of an Adaptive Neuro-Fuzzy Inference …

Case Study Of Coastal Erosion And Measures At Kezailiao Coast, Taiwan, Tai-Wen Hsu, Yi-Tse Tu, Jen-Yi Chang

Journal of Marine Science and Technology

This paper examines major factors of coastal erosion and measures against beach erosion at Kezailiao Coast, Taiwan. Typical examples of coastal erosion due to natural or man-made factors are reviewed. Case studies of countermeasure for beach erosion are addressed. We further analyze and discuss historical shoreline and coastal cliff recession as a result of the attack of storm surges and waves. The coastline mainly made up of cliffs (2-3m high), made of soft, easily eroded boulder sand and clay. In total, 3km of land have been lost since 1951, including villages and farm buildings. The most important impacts of beach …

Wearable Sensor-Based Walkability Assessment At Ferry Terminal Using Machine Learning: A Case Study Of Mokpo, Korea, Jungyeon Choi, Hwayoung Kim

Journal of Marine Science and Technology

Walkability assessments are becoming more popular, as walking offers numerous health, environmental, and economic benefits to communities. However, previous studies on ferry terminal walkability assessment have been inadequate. This study aimed to develop a wearable sensor system to automatically assess walkability at ferry terminals without conducting surveys. We applied seven machine learning (ML) classifiers to detect different walking environments, including flat ground (FG), downhill slope (DS), uphill slope (US), and uneven surface (UE). The ML models were evaluated across different combinations of classes: 2-class (FG vs. UE), 3-class (U) (FG vs. US vs. UE), 3-class (D) (FG vs. DS vs. …

Application Of Blockchain Technology In Aquaculture Management, Yu-Jen Pan, Hsin-Pei Shieh

Journal of Marine Science and Technology

In recent years, food safety has become a growing concern in Taiwanese society. To ensure efficient management of the supply chain within the L Aquatic Products company, it is imperative to employ reliable technical support in establishing an effective traceability management system. The traceability of products can provide managers with valuable insight into the intricacies of the supply chain. By establishing a dependable food traceability system, brand trust can be strengthened, and consumers can inquire about the movement of aquatic products within the supply chain. Blockchain technology offers features such as traceability, accountability, transparency, reliability, trust, privacy, and security, making …

Production Of Ground Granulated Blast-Furnace Slag Cement: Energy And Carbon Reduction Efficiency Of Cement-Grinding System, Kuan-Hung Lin, Chung-Chia Yang

Journal of Marine Science and Technology

This study used clinker, ground granulated blast-furnace slag (GGBS), and gypsum in a cement-grinding system to produce GGBS cement (GCE). Gypsum was used as the alkaline activator to modify the surface area of GCE and increase its compressive strength. The results revealed that the use of the gypsum activator and the modification of the surface area of GCE effectively increased the formerly inadequate compressive strength of GCE (GGBS > 60%) in the early stage. In addition, energy consumption data were obtained during the production of GCE and Portland cement (PCE) by the cement-grinding system. The calculations concerning the production proportions indicated …

Challenges In Optimization For The Performance On Sustainability Dimensions In Reverse Logistics Social Responsibility, Sumarsono Sudarto, Katsuhiko Takahashi, Mochammad Dewo

Makara Journal of Technology

Reverse logistics social responsibility is preferred as the most acceptable solution for addressing the challenges in stakeholders’ debate regarding social responsibility in supply chains because it involves as many actors as possible in the supply chain to perform social responsibility to achieve sustainability. This paper explores the challenges in achieving optimal policies in sustainability dimensions for collection and recycling facilities in reverse logistics. Sustainability dimensions include economic, environmental, and social aspects. The reverse logistics is modeled on System Dynamics, and a simplified statistical analysis using a contour chart is employed in numerical experiments. Results show a narrow area of optimal …

The Performance Analysis And Optimization Of Wave Energy Converters From Modeling To Basin Testing, Lauren Dickson

Electronic Theses and Dissertations

The successful development and optimization of wave energy converters (WECs) are pivotal to the pursuit of sustainable and renewable energy sources. This thesis explores the elements in a workflow that develops and demonstrates the protocols for the optimization of WECs using a rapid design\build\test procedure. This thesis establishes the characterization of scaled ocean test sites, develops the performance metrics, generates the performance modeling techniques to predict the optimum design geometries which will be produced for final testing, and finally, establishes the basin test plan which will be used to conduct the testing on the optimum design. The findings of this …

Construction Of A Real-Time Forecast Model With Deep Learning Techniques For Coastal Engineering & Processes: Nested In Basin Scale Suite Of Models, Md Ahsan Habib

Theses and Dissertations

The study aims to develop a robust and adaptable real-time forecasting system for coastal and estuarine regions, considering the challenges of limited or unavailable forecast data. To address the challenge of data unavailability, this study proposes the application of a deep learning model (DLM). This research involves the development of a high-resolution numerical model nested within global models. Calibration and validation are performed by comparing the model with observed data. The study explores the effects of various parameters, such as vertical resolution, wind variability, and bottom roughness, on model performance. It finds that the 10-layer model improves vertical stratification and …

Algorithms For The Generalized Inverse Solution And Direct Solution: Using An Algebra Computer-Based System To Obtain Meridian Arc Length, Wei-Kuo Tseng, King-Cheng Tsai, Chian Liou, Jiunn-Liang Guo, Yi-Jia Sun

Journal of Marine Science and Technology

In this study, the idea employed in the article of [1] to treat the problem of the arc-length of meridian is applied to the arc-length determined by the third flattening (n) instead of the eccentricity (e) of an Earth-reference ellipsoid . With WGS 84 ellipsoid datum used in modern navigation, the meridian arc-length is a crucial factor for map projections and geodetic and distance calculations such as Mercator charts, the universal transverse Mercator, great circle (ellipse), rhumb line, and geodesic. Because navigation software lacks officially standardized calculation methods, these “black box solutions” used in navigational systems are unknown. Therefore members …

Three-Dimensional Higher-Order Compressive Sensing For Raypath Separation In An Acoustic Waveguide, Fengyan Zhong

Journal of Marine Science and Technology

In an acoustic waveguide, the separation of multiple raypaths, especially close raypaths, is a challenging task in the presence of colored noise due to interference in the acoustic eld. In this paper, a three-dimensional higher-order compressive sensing method for raypath separation is proposed. The method is applied on an array-to-array experimental conguration where both emitter and reception arrays are used. With the array-to-array conguration, the raypaths are characterized by three parameters including arrival direction, departure direction, and arrival time. Furthermore, the performance of the proposed algorithm is illustrated by simulations and experiments. The numerical results based on simulation illustrate that …

Projection Of Sea Surface Temperature Based On Empirical Mode Decomposition And Its Application In Typhoon Number Forecast, Wen-Cheng Huang, Jung-Chen Lee

Journal of Marine Science and Technology

The primary objective of this paper is to demonstrate the applicability of empirical mode decomposition (EMD) in projecting non-stationary daily sea surface temperature (SST) series, and the other is to apply the projected series of SST to estimate the number of typhoons. The study focuses on an area ranging from 5°N~25°N and 110°E~170°E, collecting daily sea temperature data and typhoons records within this region. The findings conclusively indicate that the EMD-based data generation method proposed in this paper can effectively addresses the limitations of previous hydrological models in generating non-stationary series, signifying a significant advancement in hydrological time series modeling …

Wave Energy Converter For Marine Vessels And Isolated Communities, Leo Kirshenbaum, Owen Pyle, Gage Howard, Charlie Camilli, Jonathan Ma, Emigdio Islas, Joseph Bonafede

Mechanical Engineering

California Polytechnic State University’s 2023 Marine Energy Collegiate Competition team, Surf Supply, has developed a floating dock that transduces wave energy into electricity. The following report aligns with MECC requirements, and our design changes since CDR are present in the User Manual in Appendix F. Our primary market research of the Blue Economy identified electric marine vessel charging and isolated communities as early adopters that could benefit most from the first generation of our wave energy converter (WEC). Surf Supply’s design concept provides a reliable, affordable, and renewable energy source that reduces dependency on conventional fossil fuels, allowing blue economy …

Development Of A Low-Cost Acoustic Gauge For Simultaneous Tide And Wave Measurement, Alexander Kalman Dunn

Master's Theses

High-quality tide and wave data are essential in a variety of fields including coastal engineering, climate science, disaster response, and recreational activities. Accurate data are publicly accessible from government organizations such as the National Oceanic and Atmospheric Administration (NOAA), however the high costs associated with deploying and maintaining their high accuracy gauges results in a deficit of localized data. Commercial gauges available starting at $2,000 are still expensive for local agencies and individual users to deploy and maintain. These commercial options can also be limited in their scope, accuracy, or ease of use. In this thesis, a low-cost acoustic gauge …

Importance Of Vegetation In Tsunami Mitigation: Evidence From Large Eddy Simulations With Fluid-Structure Interactions, Abhishek Mukherjee

Dissertations

Communities worldwide are increasingly interested in nature-based solutions like coastal forests for the mitigation of coastal risks. Still, it remains unclear how much protective benefit vegetation provides, particularly in the limit of highly energetic flows after tsunami impact. The present thesis, using a three-dimensional incompressible computational fluid dynamics model with a fluid-structure interaction approach, aims to quantify how energy reflection and dissipation vary with different degrees of rigidity and vegetation density of a coastal forest.

In this study, tree trunks are represented as cylinders, and the elastic modulus of hardwood trees such as pine or oak is used to characterize …

Sensor Updates For Bigheaded Carp-Tracking Autonomous Boat, Jordan Kaufmann

Honors College Theses

Bigheaded carp are an invasive species that overpopulate and compete with the native species of Kentucky Lake as well as many other North American aquatic ecosystems. The movement patterns of Bigheaded carp are being studied nationwide by the United States Geological Survey and multiple universities. These studies ultimately seek to control their spread and reduce or reverse the ecosystem destabilization caused by this invasive species. Such studies are currently conducted manually on Kentucky Lake by graduate students affiliated with the Murray State University (MSU) Biology Department and Hancock Biological Station, and these manual studies are an arduous and time-consuming effort. …

Estimating Remaining Life And Fitness-For-Services Evaluation Of Fuel Piping Systems, Sekar Putri Purwidyasari, Ahmad Isni Kurniawan, Deni Ferdian

Journal of Materials Exploration and Findings

Assets life extension are required to predict the design life expiry based on condition and effects of deterioration. The remaining life assessment will answer the questions about timing of the component or equipment will lead to failure and shall be evaluated by inspection and maintenance monitoring. This study elaborates process calculation and analysis by using remaining life assessment and fitness for services method according to API 579-1/ASME FFS-1 for process piping area. The result of remaining useful life estimation and estimated life has been proposed. There are 11 piping systems based on the condition monitoring with thickness measurements. The result …