Open Access. Powered by Scholars. Published by Universities.®

Mechanical Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2016

Theses/Dissertations

University of Texas Rio Grande Valley

Articles 1 - 11 of 11

Full-Text Articles in Mechanical Engineering

Multivariate Calibration Of A Load Sensor For Dynamic And Static Freight Railcar Applications, Dylan Michael Blackwell Dec 2016

Multivariate Calibration Of A Load Sensor For Dynamic And Static Freight Railcar Applications, Dylan Michael Blackwell

Theses and Dissertations

Determination of the load carried by each bearing in a railcar system is crucial to the integrity of the railroad industry. With accurate load measurement, the process of filling a railcar with its specified cargo can be optimized to provide the maximum amount of cargo without exceeding the upper weight limits imposed by the Associations of American Railroads (AAR). An accurate load measurement will additionally make it possible to identify any load imbalance that occurs during periods of travel which result in having a detrimental effect on the health of the bearing. Previous work conducted with a strain-gauge load sensor …

Go to article

Forcespinning®: An Alternative Method To Fabricate Metal Oxide/Carbon Composite Nanofiber Anodes For Li-Ion Batteries, Luis Zuniga Dec 2016

Forcespinning®: An Alternative Method To Fabricate Metal Oxide/Carbon Composite Nanofiber Anodes For Li-Ion Batteries, Luis Zuniga

Theses and Dissertations

Metals and their respective oxides have been highly regarded as next generation anode materials for lithium-ion batteries (LIBs). In this research work the electrochemical performance of Sn, SnO2, and TiO2. With the advantages of nanotechnology and the Forcespinning® method of fabricating micro and nanofibers, binder-free anodes are produced from metal or metal oxide/carbon composite microfibers. Through these microfibers the electrochemical performance of the above mentioned materials are significantly improved due to the increased surface area per volume providing a large number of reaction sites for the anode materials. Further performance enhancement was achieved by also modifying the fiber microstructure to …

Go to article

Optimizing Border Security With Stochastic And Deterministic Strategies, Gabriel A. Rueda Dec 2016

Optimizing Border Security With Stochastic And Deterministic Strategies, Gabriel A. Rueda

Theses and Dissertations

International trade and border security have always been linked together, and so has the need to find ways to improve security decisions. The United States and bordering countries benefit from the North American Free Trade Agreement (NAFTA), but amongst the positive effects of NAFTA there is a looming drug threat that effects the bi-national supply chains. In 2015 Customs and Border Protections (CBP) processed over 72,000 trucks, rail, and sea containers a day. CBP also seized 3.4 million pounds of narcotics, the majority of them at the ports of entry. With unknown threats using commercial vehicles to transport their illicit …

Go to article

Wettability Of Nonwoven Polymeric Nanofiber Mats, Edgar Munoz Dec 2016

Wettability Of Nonwoven Polymeric Nanofiber Mats, Edgar Munoz

Theses and Dissertations

The wettability of heterogeneous materials has been attracting special interest by academia and industrial sector given the need to development self-cleaning Nonwoven nanofiber mats have demonstrated potential given its hydrophobicity granted by the ultimate structure of the system, small fiber diameter and small pores giving rise to effects such as the Cassie-Baxter. This thesis analyzed the wettability of a wide range of polymeric systems. Nanofiber mats were manufactured using the Forcespinning® technology. Samples were prepared at different polymeric concentrations and rotational speeds to alter fiber size; density of the mat was also altered to evaluate the effect of porosity on …

Go to article

Knee Joint Internal Forces During Squat Jump Exercise, Ricardo Moreno Dec 2016

Knee Joint Internal Forces During Squat Jump Exercise, Ricardo Moreno

Theses and Dissertations

The purpose of this research is to investigate muscular ligament and joint contact forces produced during squat jump exercise. An inverse dynamics, two dimensional, leg model is used to describe the motion in the sagittal plane. The lower extremity model includes two bones, tibia and femur, tibio-femoral ligaments, and muscles such as quadriceps, hamstrings, and gastrocnemius. The ligaments are anatomically modeled as nonlinear strings, but the femoral condyle is modeled as a circle and the tibial plateau as a straight line. Experimental squat jump exercises are conducted to obtain the ground reaction forces, the angular accelerations, and centroid linear acceleration …

Go to article

Development Of A Fundamental Autonomous Ground Vehicle Cruise Control Using Matlab And Simulink, Luis F. Martinez Dec 2016

Development Of A Fundamental Autonomous Ground Vehicle Cruise Control Using Matlab And Simulink, Luis F. Martinez

Theses and Dissertations

This study presents and describes the development of a fully autonomous vehicle cruise control system covering the vehicle dynamics and control design needed to simulate such system. It encompasses obstacle avoidance, intelligent-and-optimal lane change as well as adaptive behavior. This study offers a comprehensive two-dimensional cruise control with three degrees of freedom and it is designed using active obstacle avoidance controllers. It also includes optimized fuzzy logic for optimal vehicle trajectory and an extensive array of control law methodology. The end work shows a complete simulation run using MATLAB and Simulink.

Go to article

Study Of Selective Laser Remelting Of 316l S.S. To Reduce Roughness On Inclined Surface, Jafar Ghorbani Dec 2016

Study Of Selective Laser Remelting Of 316l S.S. To Reduce Roughness On Inclined Surface, Jafar Ghorbani

Theses and Dissertations

Additive manufacturing (AM) technologies are increasingly competing with subtractive methods, and there are promising applications for additive technologies that are hybrid with traditional manufacturing methods. Poor surface roughness of additive manufactured parts continues to be a major challenge especially for advanced functional parts. In this study, effect of processing parameters are evaluated, optimized and verified by using the Box–Behnken design of experiment method. The results, for the first time, reveal that surface remelting has the potential to become a high speed approach for improving the roughness of non-horizontal surface of additive manufactured parts.

Go to article

Design Of Three-Dimensional Near-Zero Refractive Index Metamaterials, David Flores Iii May 2016

Design Of Three-Dimensional Near-Zero Refractive Index Metamaterials, David Flores Iii

Theses and Dissertations

Near-zero refractive index metamaterials exhibit remarkable electromagnetic properties which can and will be applied in the near future. From the known methods of achieving near-zero refractive index, this work primarily focuses on the design of 3D metamaterials whose permittivity and permeability are both close to zero while maintaining relatively low loss factor. The design of the metamaterials is based on the chiral shape “omega” and designed to weave periodically as a fishnet. Theoretical analysis, computer modeling and simulation are steps taken in the design of metamaterials. A computational tool based on the robust method for effective parameter extraction is successfully …

Go to article

Graphene-Based Nanomaterials For Hydrogen Generation And Storage, Lin Wei May 2016

Graphene-Based Nanomaterials For Hydrogen Generation And Storage, Lin Wei

Theses and Dissertations

Hydrogen energy is promising candidate to replace fossil fuel. However, the usage of hydrogen energy was greatly limited due to its generation and storage. In this thesis report, the author synthesized novel metal/carbon nanomaterials used for the hydrogen storage and hydrogen evolution reaction. These materials were characterization by XRD, Raman, XPS, SEM, EDX, etc. And the surface area and the hydrogen storage properties were tested by ASAP 2020, using the BET measurement and hydrogen isotherm curves to discuss the gas adsorption properties. As for hydrogen evolution reaction, the materials were made into electrodes and tested with LSV, CV to shows …

Go to article

Thermal Conductivity Measurements Of Nanomaterials, Javier Acosta Martinez May 2016

Thermal Conductivity Measurements Of Nanomaterials, Javier Acosta Martinez

Theses and Dissertations

Thermal conductivity “k” can be defined as a material property where heat is diffused due to a temperature gradient within the material. Among the applications for thermal conductivity are: thermoelectrics, thermal interface materials, thin films, insulation, among many others. A study was made to compare the different types of studies of thermal conductivity of nanomaterials, as well as, a comparison among the different types of setups used to measure thermal conductivity. For this study a custom made thermal conductivity tester was built, this tester was validated by measuring materials with both low and high thermal conductivity, and comparing the results …

Go to article

Nonlinear Dynamics Of Electrostatically Actuated Nanotweezers, Bin Liu May 2016

Nonlinear Dynamics Of Electrostatically Actuated Nanotweezers, Bin Liu

Theses and Dissertations

Bin Liu, Nonlinear Dynamics of Electrostatically Actuated Nanotweezers. Master of Science (MS), May 2016, 77 pp, 6 tables, 59 figures, references, 25 titles. The amplitude-frequency response of electrostatic nanotube nanotweezer device system is investigated; soft alter current was setting at near half natural frequency impulse on nanotubes which are referred to as two arms, parametric and primary resonances will be shown in the results, respectively. Firstly we are using the Method of Multiple Scales (MMS) analytical model; results will be compared with Reduced Order Model (ROM). By variation and comparison of multiple parameters including van der wall molecular forces, electrostatic …

Go to article