Mechanical Engineering Commons^™

Photovoltaic Cooking In The Developing World, Tyler Watkins, Christopher O'Day, Omar Arriaga

Mechanical Engineering

The challenge of clean cooking is faced by hundreds of millions of people worldwide. We present a cooking technology consisting of a solar panel directly connected to an electric heater in a well-insulated chamber. Assuming continued decrease in solar panel prices, we anticipate that in a few decades Solar Electric Cooking technologies will be the most common cooking technology for the poor. Appropriate use of insulation reduces the power demand making low-power Insulated Solar Electric Cooking systems already cost competitive.

A Framework For Studying Meshfree Geometry And A Method For Explicit Boundary Determination, Joseph Bradley Alford

USF Tampa Graduate Theses and Dissertations

Patient-specific biomechanical analysis is an important tool used to understand the complex processes that occur in the body due to physical stimulation. Patient-specific models are generated by processing medical images; once an object from the image is identified via segmentation, a point cloud representation of the object is extracted. Generating an analysis suitable representation from the point cloud has traditionally required generating a finite element mesh, which often requires a well defined surface to accomplish. Point clouds lack a well defined geometry, meaning that the surface definition is incomplete at best. Point clouds that have been generated from images have …

Molybdenum Disulfide-Conducting Polymer Composite Structures For Electrochemical Biosensor Applications, Hongxiang Jia

USF Tampa Graduate Theses and Dissertations

Lactic acid is widely existing in human bodies, animals and microorganisms. Recently, using biosensor to detect the concentration of lactic acid and diagnose disease have attracted great research and development interests. Nanocomposites is one of the best material used for biosensor because their wonderful conductivity, optical and electrochemical properties. In the study, MoS₂ and polypyrrole (PPY) are used for the composite material electrode. To determine whether lactate oxidase (LOD) was helpful for the biosensor’s detective properties, both PPY-MoS₂ film with LOD and PPY-MoS₂ film without LOD are being tested. The fourier transform infrared spectroscopy (FTIR) and Raman …

Effects Of Emf Emissions From Undersea Electric Cables On Coral Reef Fishes, Robert F. Jermain

HCNSO Student Theses and Dissertations

The objective of this project was to determine if the electromagnetic field (EMF) emissions from undersea power cables impacted the local and transient marine life, with an emphasis on reef fishes. The work was done at South Florida Ocean Measurement Facility of Naval Surface Warfare Center, Carderock Division, Broward County, Florida. This facility functions as the hub for a range of active undersea detection and data transmission cables. It has multiple active submarine power cables that extend several miles offshore and which can deliver power and enable data transmission to and from a range of acoustic and EMF sensors. The …

The Development Of A Prosthetic Training Software For Upper Limb Amputees, Tyler Kayne Sullins

USF Tampa Graduate Theses and Dissertations

The purpose of this study was to develop an intuitive software that aids in the field of prosthetic training and rehabilitation by creating an individualized visualization of joint angles. This software is titled “the prosthetic training software (PTS) for individualized joint angle representation”, and it enables the individualized portrayal of predicted or pre-recorded joint angles. The PTS is an intuitive program for clinicians and prosthesis users that produces an animation of a virtual avatar reflecting the user’s segment lengths and amputation for rehabilitation and training purposes.

The PTS consists of a graphical user interface (GUI) and a 3D visualization of …

Prosthetic Socket Cooling System, Benjamin K. Kraw, Kathy Ha, Derek Piastrelli, Cuong Lai

Mechanical Engineering

A team of four senior-level undergraduate students in the Interdisciplinary Senior Project Design course in the Engineering Department of California Polytechnic State University: San Luis Obispo have worked to develop a prosthetic socket cooling system, namely for veteran Taylor Morris and exclusively for a transfemoral prosthetic socket, under the Quality of Life+ Laboratory. This cooling system will utilize the thermoelectric effect known as the Peltier effect to transmit heat generated from the residual limb to the surrounding environment by means of forced convection over small aluminum heat sinks. Two measurement devices have also been developed to, one, measure the heat …

Physical Testing Of Potential Football Helmet Design Enhancements, Michael Jeremy Schuster

Master's Theses

Football is a much loved sport in the United States. Unfortunately, it is also hard on the players and puts them at very high risk of concussion. To combat this an inventor in Santa Barbara brought a new design to Cal Poly to be tested.

The design was tested in small scale first in order to make some preliminary conclusions about the design. In order to fully test the helmet design; however, full scale testing was required. In order to carry out this testing a drop tower was built based on National Operating Committee on Standards for Athletic Equipment, NOCSAE, …

A Study Of The Hydrostatic And Hydrodynamic Properties Of Aeoliscus Straigatus, Jeremy J. Keifenheim

Theses and Dissertations

Aeoliscus strigatus is a highly maneuverable fish found in the Indo-Pacific region. It boasts a unique head down posture and employs median paired fin propulsion to perform precise movements. The need for highly maneuverable underwater AUVs for exploration and testing drove the examination of the hydrostatics and hydrodynamics influencing Aeoliscus. To determine the stability of Aeoliscus the center of gravity and buoyancy were found. Center of gravity was experimentally located using the three plumb line method while center of buoyancy was located using two separate methods. The first method utilized the measured buoyant force, a rigidly mounted fish and a …

Cfd Model For Ventilation In Broiler Holding Sheds, Christian Heymsfield

Biological and Agricultural Engineering Undergraduate Honors Theses

Broiler production in Arkansas was valued at over $3.6 billion in 2013 (University of Arkansas Extension of Agriculture). Consequently, improvement in any phase of the production process can have significant economic impact and animal welfare implications. From the time poultry leave the farm and until they are slaughtered, they can be exposed to harsh environmental conditions, both in winter and in summer. After road transportation, birds are left to wait in holding sheds once they arrive at the processing plant, for periods of approximately 30 minutes to two hours. This project was interested in this holding shed waiting time during …

H.F. Hauff Pruner Housing & Ergonomics, Erich E. Heilman

All Undergraduate Projects

The technology of electric tree pruners in the current agricultural market has many engineering problems, including; a deficit in power output, excessive overheating, and ergonomics. The 3-man pruner team has coordinated with H.F. Hauff Co. Inc., an agricultural equipment company owned by Neil Hauff, to produce an electric pruner prototype which addresses these problems. The methods used to design the optimal pruner prototype includes traditional engineering stress analysis, force flow analysis, finite element software, and Solidworks modeling software. The construction of the pruner involved manual machining methods and C.N.C. (Computerized Numerical Control) mill technology. During the design process, the team …

Development Of An Elderly Female Torso Finite Element Model For Restraint System Research And Development Applications, Anil Kalra Kalra

Wayne State University Dissertations

Elderly females are found to be one of the most vulnerable segments of population during motor vehicle crashes and their population is increasing in the coming decades. Current design of restraint systems as well as other passive safety measures are designed based on anthropomorphic details of younger population. Developing another dummy representing elderly female population is a costly effort, while a finite element (FE) model of elderly female with similar anthropomorphic details and age- and gender-specific material properties can be a better alternative solution. The current research focuses on the development of a FE model of an elderly female torso, …

Project Oasis: Optimizing Aquaponic Systems To Improve Sustainability, Siddharth Nigam, Paige Balcom

Honors Theses and Capstones

Started in Fall 2015, Project OASIS (Optimizing Aquaponic Systems to Improve Sustainability) is an interdisciplinary capstone project with the goal of designing a sustainable and affordable small-scale aquaponic system for use in developing nations to tackle the problems of malnutrition and food insecurity. Aquaponics is a symbiotic relationship between fish and vegetables growing together in a recirculating system. The project’s goals were to minimize energy consumption and construction costs while using universally available materials. The computational fluid dynamics (CFD) software OpenFOAM was used to create transient and steady-state models of fish tanks to visualize velocity profiles, streamlines, and particle movement. …