Mechanical Engineering Commons^™

Formation Of Organized Nanostructures From Unstable Bilayers Of Thin Metallic Liquids, Mikhail Khenner, Sagar Yadavali, Ramki Kalyanaraman

Mathematics Faculty Publications

Dewetting of pulsed-laser irradiated, thin (< 20 nm), optically reflective metallic bilayers on an optically transparent substrate with a reflective support layer is studied within the lubrication equations model. A steady-state bilayer film thickness (h) dependent temperature profile is derived based on the mean substrate temperature estimated from the elaborate thermal model of transient heating and melting/freezing. Large thermocapillary forces are observed along the plane of the liquid-liquid and liquid-gas interfaces due to this h-dependent temperature, which, in turn, is strongly influenced by the h-dependent laser light reflection and absorption. Consequently the dewetting is a result of the competition between thermocapillary and intermolecular forces. A linear analysis of the dewetting length scales established that the non-isothermal calculations better predict the experimental results as compared to the isothermal case within the bounding Hamaker coefficients. Subsequently, a computational non-linear dynamics study of the dewetting pathway was performed for Ag/Co and Co/Ag bilayer systems to predict the morphology evolution. We found that the systems evolve towards formation of different morphologies, including core-shell, embedded, or stacked nanostructure morphologies.

Formation Of Organized Nanostructures From Unstable Bilayers Of Thin Metallic Liquids, Mikhail Khenner, Sagar Yadavali, Ramki Kalyanaraman

Mikhail Khenner

Dewetting of pulsed-laser irradiated, thin (< 20 nm), optically reflective metallic bilayers on an optically transparent substrate with a reflective support layer is studied within the lubrication equations model. A steady-state bilayer film thickness (h) dependent temperature profile is derived based on the mean substrate temperature estimated from the elaborate thermal model of transient heating and melting/freezing. Large thermocapillary forces are observed along the plane of the liquid-liquid and liquid-gas interfaces due to this h-dependent temperature, which, in turn, is strongly influenced by the h-dependent laser light reflection and absorption. Consequently the dewetting is a result of the competition between thermocapillary and intermolecular forces. A linear analysis of the dewetting length scales established that the non-isothermal calculations better predict the experimental results as compared to the isothermal case within the bounding Hamaker coefficients. Subsequently, a computational non-linear dynamics study of the dewetting pathway was performed for Ag/Co and Co/Ag bilayer systems to predict the morphology evolution. We found that the systems evolve towards formation of different morphologies, including core-shell, embedded, or stacked nanostructure morphologies.

Aerosol-Assisted Synthesis Of Monodisperse Single-Crystalline Α-Cristobalite Nanospheres, Xingmao Jiang, Lihong Bao, Yung-Sung Cheng, Darren R. Dunphy, Xiaodong Li, C. Jeffrey Brinker

Faculty Publications

Monodisperse single-crystalline α-cristobalite nanospheres have been synthesized by hydrocarbon-pyrolysis-induced carbon deposition on amorphous silica aerosol nanoparticles, devitrification of the coated silica at high temperature, and subsequent carbon removal by oxidation. The nanosphere size can be well controlled by tuning the size of the colloidal silica precursor. Uniform, high-purity nanocrystalline α-cristobalite is important for catalysis, nanocomposites, advanced polishing, and understanding silica nanotoxicology.

Micromechanical Studies Of Intergranular Strain And Lattice Misorientation Fields And Comparisons To Advanced Diffraction Measurements, Lili Zheng

Doctoral Dissertations

Inhomogeneous deformation fields arising from the grain-grain interactions in polycrystalline materials have been evaluated using a crystal plasticity finite element method and extensively compared to neutron diffraction measurements under fatigue crack growth conditions. The roles of intergranular deformation anisotropy, grain boundary damage, and non-common deformation mechanisms (such as twinning for hexagonal close packed crystals) are systematically evaluated. The lattice misorientation field can be used to determine the intragranular deformation behavior in polycrystals or to describe the deformation inhomogeneity due to dislocation plasticity in single crystals. The study of indentation-induced lattice misorientation fields in single crystals sheds lights on the understanding …

Access|Closure Balloon Catheter Redesign Project, Keenan Bamburg, Yvette Castillo, Elizabeth Eskildsen

Mechanical Engineering

No abstract provided.

Modeling Of A Novel Solar Down Beam Test Facility Utilizing Newtonian Optics, Ryan J. Hoffmann

UNLV Theses, Dissertations, Professional Papers, and Capstones

As advances in concentrated solar energy progress there will inevitably be an increase in the demand of resources for testing new conceptions. Currently, there are limited facilities available for taking concentrated solar energy concepts from the laboratory bench scale to the engineering test scale. A proposed solution is a scientific and developmental facility that provides highly concentrated solar energy at ground level. The design presented is a solar down beam test facility utilizing a Newtonian optics approach with a flat rectangular down beam mirror to reflect and concentrate the sun's rays at ground level.

Literature review suggests a hyperbolic reflector …

History Of The Biological Systems Engineering Program In Nebraska, University Of Nebraska-Lincoln, William E. Splinter

Tractor Testing Development and Research Documents

The Farm Machinery/Agricultural Engineering/Biological Systems Engineering program current and former faculty members at the University of Nebraska, as demonstrated here, has made a statewide, national, and worldwide impact on the efficient production of food. The quality of this recognition is evidenced best by peer professionals through recognized ASABE awards received by Nebraska alumni or professors. Since its inception in 1909 and until 2010, there have been 10 national presidents, 19 gold medal recipients and 33 named national award recipients. Currently there are 31 ASABE Fellows and two members of the National Academy of Engineering. This national recognition comes as a …

Synthesis, Structural, Optical And Mechanical Characterization Of Srb2O4 Nanorods, Rui Li, Lihong Bao, Xiaodong Li

Faculty Publications

Single crystalline strontium borate (SrB₂O₄) nanorods were synthesized for the first time via a facile sol–gel route at low temperature. The SrB₂O₄ nanorods have a good crystalline nature with the growth direction along the [511] orientation and they are transparent from the ultraviolet to the visible regimes. Nanoscale three-point bending tests were performed directly on individual nanorods to probe their mechanical properties using an atomic force microscope. The elastic modulus of SrB₂O₄ nanorods was measured to be 158.2 ± 2.8 GPa, exhibiting a significant increase compared with other borate nanostructures …

3d Simulation Of Wind Turbine Rotors At Full Scale. Part Ii: Fluid–Structure Interaction Modeling With Composite Blades, Y. Bazilevs, Ming-Chen Hsu, J. Kiendel, R. Wuchner, K. U. Bletzigner

Ming-Chen Hsu

In this two-part paper, we present a collection of numerical methods combined into a single framework, which has the potential for a successful application to wind turbine rotor modeling and simulation. In Part 1 of this paper we focus on: 1. The basics of geometry modeling and analysis-suitable geometry construction for wind turbine rotors; 2. The fluid mechanics formulation and its suitability and accuracy for rotating turbulent flows; 3. The coupling of air flow and a rotating rigid body. In Part 2, we focus on the structural discretization for wind turbine blades and the details of the fluid–structure interaction computational …

High-Performance Computing Of Wind Turbine Aerodynamics Using Isogeometric Analysis, Ming-Chen Hsu, Ido Akkerman, Yuri Bazilevs

Ming-Chen Hsu

In this article we present a high-performance computing framework for advanced flow simulation and its application to wind energy based on the residual-based variational multiscale (RBVMS) method and isogeometric analysis. The RBVMS formulation and its suitability and accuracy for turbulent flow in a moving domain are presented. Particular emphasis is placed on the parallel implementation of the methodology and its scalability. Two challenging flow cases were considered: the turbulent Taylor–Couette flow and the NREL 5 MW offshore baseline wind turbine rotor at full scale. In both cases, flow quantities of interest from the simulation results compare favorably with the reference …

Vibration-Based Health Monitoring Of Multiple-Stage Gear Train And Differential Planetary Transmission Involving Teeth Damage And Backlash Nonlinearity, Andrew Patrick Sommer

Master's Theses

The objective of this thesis is to develop vibration-based fault detection strategies for on-line condition monitoring of gear transmission systems. The study divides the thesis into three sections. First of all, the local stresses created by a root fatigue crack on a pinion spur gear are analyzed using a quasi-static finite element model and non-linear contact mechanics simulation. Backlash between gear teeth which is essential to provide better lubrication on tooth surfaces and to eliminate interference is included as a defect and a necessary part of transmission design. The second section is dedicated to fixed axis power trains. Torsional vibration …

Air Plasma Sprayed Thermal Barrier Coatings: Experiments And Finite Element Analysis, Charles H. Thistle

Master's Theses

The purpose of this research was to examine the primary in-service failure mechanism of an air plasma sprayed thermal barrier coating commonly used in combustor applications, and to use that failure mechanism as a basis in developing a life prediction strategy. The research consisted of an experimental phase, in which the failure mechanism was identified and key features of the coating system measured, and a modeling phase, in which the findings of the experimental phase were used to build a system specific finite element model of the coating in order to extract quantitative data relevant to coating life.

Observations were …

In Situ Synthesis Of Ultrafine Ss-Mno2/Polypyrrole Nanorod Composites For High-Performance Supercapacitors, Jianfeng Zang, Xiaodong Li

Faculty Publications

We report a remarkable observation that is at odds with the established notion that β-MnO₂ was regarded as an undesirable candidate for supercapacitor applications. The specific capacitance of β-MnO₂ can reach as high as 294 F g⁻¹, which is comparable to the best crystallographic structure, like α-MnO₂. The key is to substantially decrease the size of β-MnO₂ powders to ultra small regime. We demonstrate a facile, simple, and effective approach to synthesizing ultrafine (<10 nm in diameter) β-MnO₂/polypyrrole nanorod composite powders for high-performance supercapacitor electrodes. Our observation may encourage a revisit of the other good …

Characteristics Of The Hydrogen Electrode In High Temperature Steam Electrolysis Process, Chao Jin, Chenghao Yang, Fanglin Chen

Faculty Publications

YSZ-electrolyte supported solid oxide electrolyzer cells (SOECs) using LSM-YSZ oxygen electrode but with three types of hydrogen electrode, Ni–SDC, Ni–YSZ and LSCM–YSZ have been fabricated and characterized under different steam contents in the feeding gas at 850°C. Electrochemical impedance spectra results show that cell resistances increase with the increase in steam concentrations under both open circuit voltage and electrolysis conditions, suggesting that electrolysis reaction becomes more difficult in high steam content. Pt reference electrode was applied to evaluate the contributions of the hydrogen electrode and oxygen electrode in the electrolysis process. Electrochemical impedance spectra and over potential of both electrodes …

Structural Analyses Of Wind Turbine Tower For 3 Kw Horizontal Axis Wind Turbine, Tae Gyun Gwon

Master's Theses

Structure analyses of a steel tower for Cal Poly's 3 kW small wind turbine is presented. First, some general design aspects of the wind turbine tower are discussed: types, heights, and some other factors that can be considered for the design of wind turbine tower. Then, Cal Poly's wind turbine tower design is presented, highlighting its main design features. Secondly, structure analysis for Cal Poly's wind turbine tower is discussed and presented. The loads that are specific to the wind turbine system and the tower are explained. The loads for the static analysis of the tower were calculated as well. …

A Generic Bamboo-Based Carbothermal Method For Preparing Carbide (Sic, B4C, Tic, Tac, Nbc, TiXNb1-XC, And TaX Nb1-XC) Nanowires, Xinyong Tao, Yiping Li, Jun Du, Yang Xia, Yingchao Yang, Hui Huang, Yongping Gan, Wenkui Zhang, Xiaodong Li

Faculty Publications

Finding a general procedure to produce a whole class of materials in a similar way is a desired goal of materials chemistry. In this work, we report a new bamboo-based carbothermal method to prepare nanowires of covalent carbides (SiC and B₄C) and interstitial carbides (TiC, TaC, NbC, Ti_xNb_1−xC, and Ta_xNb_1−xC). The use of natural nanoporous bamboo as both the renewable carbon source and the template for the formation of catalyst particles greatly simplifies the synthesis process. Based on the structural, morphological and elemental analysis, volatileoxides or halides assisted …

Competition Sit Ski Final Design Report, Kyle Martinez, Vinay Clauson, Ben Woodward

Mechanical Engineering

This project consisted of designing and fabricating a competition sit ski for an above-knee double-amputee, Andy Soule. Andy is a talented athlete who won a bronze medal in the 2010 Winter Paralympics. The project was completed by VinayClauson, Kyle Martinez, and Ben Woodward, mechanical engineering seniors at California Polytechnic State University in San Luis Obispo, CA. The project advisor, Professor Sarah Harding, and sponsor Dr. Brian Self, of the Mechanical Engineering Department at Cal Poly, oversaw the project with the help of Jon Kreamelmeyer, a former coach of Andy's and a valuable source of knowledge. The sit ski project was …

Thrust-Vector Control, Dane Larkin, Harsimran Singh

Mechanical Engineering

Mission Statement

The purpose of this project is to design, build, and test a thrust-vectoring rocket nozzle which will aid in controlling the trajectory of a solid-booster rocket. The system prototype must meet the requirements set forth by the sponsoring enterprise.

The Enterprise

Stellar Exploration is a small space systems technology company located in San Luis Obispo, CA. Stellar Exploration is currently seeking a thrust-vectoring system for its Silver Sword rocket.

Project Scope

The design and analysis portion of this project accounted for a system that would be mounted on to a rocket for operational flight. Therefore, this team has …

Structure Climbing Monkey Robot, Paul Bessent

Master's Theses

This report describes the design, building, and testing of the Structure Climbing Monkey Robot (SCMR). It is composed of seven successive joints and linkages with two grippers at the two ends. Each gripper can act as the base or the end of the robot. The SCMR has the ability to climb any structure. The gripper plates can be changed to grab different kinds of structures, but this one is made to grab 2x4‘s. A program was written to assist the user to grab four non-coplanar, non-orthogonal points.

The SCMR is actuated by a total of nine motors: two to open …

Airplane Landing Flare-The Last 5 Seconds, Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Mechatronics Application To Solar Tracking, Danny L. Rodriguez Jr

Purdue Polytechnic Directed Projects

The purpose of this was to design and implement a two-axis solar tracking system utilizing the National Instruments C-Rio real time controller. In order to accomplish this a prototype was modeled in CAD. This prototype used two 12 V DC motors to change a solar panel's rotation and tilt based on feedback data from three cadmium sulfide photoresistors. This configuration was chosen for its ability to create both a left-right rotational and an up/down tilt differential. In Addition this approach uses National Instruments Labview to control a solar tracking system. Using Labview add uniqueness to this project by adding a …

Some Considerations For Regional Airline Operations On Contaminated Runways., Nihad E. Daidzic

Aviation Department Publications

No abstract provided.

Newsletter 44 Issue 1 - Spring 2011 - Nuts And Bolts

Friends of the Larsen Tractor Museum

No abstract provided.

Stability Of A Strongly Anisotropic Thin Epitaxial Film In A Wetting Interaction With Elastic Substrate, Mikhail Khenner, Wondimu T. Tekalign, Margo S. Levine

Mathematics Faculty Publications

The linear dispersion relation for longwave surface perturbations, as derived by Levine et al. Phys. Rev. B 75, 205312 (2007) is extended to include a smooth surface energy anisotropy function with a variable anisotropy strength (from weak to strong, such that sharp corners and slightly curved facets occur on the corresponding Wulff shape). Through detailed parametric studies it is shown that a combination of a wetting interaction and strong anisotropy, and even a wetting interaction alone results in complicated linear stability characteristics of strained and unstrained films.

Stability Of A Strongly Anisotropic Thin Epitaxial Film In A Wetting Interaction With Elastic Substrate, Mikhail Khenner, Wondimu Tekalign, Margo Levine

Mathematics Faculty Publications

The linear dispersion relation for longwave surface perturbations, as derived by Levine et al. Phys. Rev. B 75, 205312 (2007) is extended to include a smooth surface energy anisotropy function with a variable anisotropy strength (from weak to strong, such that sharp corners and slightly curved facets occur on the corresponding Wulff shape). Through detailed parametric studies it is shown that a combination of a wetting interaction and strong anisotropy, and even a wetting interaction alone results in complicated linear stability characteristics of strained and unstrained films.

Modeling Diverse Physics Of Nanoparticle Self-Assembly In Pulsed Laser-Irradiated Metallic Films, Mikhail Khenner

Mathematics Faculty Publications

Presents physics behind dewetting of thin liquid films and mathematical/computational modeling tools (Educational/Research presentation for senior physics majors).

3d Simulation Of Wind Turbine Rotors At Full Scale. Part I: Geometry Modeling And Aerodynamics, Y. Bazilevs, Ming-Chen Hsu, I. Akkerman, S. Wright, K. Takizawa, B. Henicke, T. Spielman, T. E. Tezduyar

Ming-Chen Hsu

In this two-part paper we present a collection of numerical methods combined into a single framework, which has the potential for a successful application to wind turbine rotor modeling and simulation. In Part 1 of this paper we focus on: 1. The basics of geometry modeling and analysis-suitable geometry construction for wind turbine rotors; 2. The fluid mechanics formulation and its suitability and accuracy for rotating turbulent flows; 3. The coupling of air flow and a rotating rigid body. In Part 2 we focus on the structural discretization for wind turbine blades and the details of the fluid–structure interaction computational …

Stability Of A Strongly Anisotropic Thin Epitaxial Film In A Wetting Interaction With Elastic Substrate, Mikhail Khenner, Wondimu T. Tekalign, Margo S. Levine

Mikhail Khenner

The linear dispersion relation for longwave surface perturbations, as derived by Levine et al. Phys. Rev. B 75, 205312 (2007) is extended to include a smooth surface energy anisotropy function with a variable anisotropy strength (from weak to strong, such that sharp corners and slightly curved facets occur on the corresponding Wulff shape). Through detailed parametric studies it is shown that a combination of a wetting interaction and strong anisotropy, and even a wetting interaction alone results in complicated linear stability characteristics of strained and unstrained films.

Modeling Diverse Physics Of Nanoparticle Self-Assembly In Pulsed Laser-Irradiated Metallic Films, Mikhail Khenner

Mikhail Khenner

Presents physics behind dewetting of thin liquid films and mathematical/computational modeling tools (Educational/Research presentation for senior physics majors).

Design Of A Smart System For Monitoring Concrete Curing And Structural Health, William Quinn

Theses

Structural Health Monitoring (SHM) is a rapidly growing sector of the construction industry. Automated monitoring methods arc mainly limited to global monitoring and the application of local monitoring methods has not gained widespread application due to the fact that currently technology requires that the systems are wired to data acquisition devices. This thesis presents a fully embeddable wireless sensor node for the local monitoring of structural concrete. It presents the first reported wireless embedded system implementation of the electromechanical impedance method using both resonant and antiresonant sensors for this purpose.

The first section of this thesis examines the feasibility of …