Mechanical Engineering Commons^™

On-Line Realtime Water Quality Monitoring And Control For Swimming Pools, Paul Duffy, Gerard Woods, Sean O'Hogain, James Walsh, C. Caplier

Conference Papers

Effective swimming pool water quality monitoring and control systems are important to safeguard public health and for bather comfort. Most Irish swimming pool monitoring systems rely heavily on manual methods for sampling, testing and data recording of important parameters. Microbiological testing is infrequent and results can often take days. The goal of this research is to develop a water quality monitoring and control system with real time data logging, automatic data analysis, remote monitoring and control, microbiological sampling capabilities and online connectivity. National Instruments hardware and its software package LabView form the basis of the monitoring and control system. Several …

Preliminary Modelling Results For An Otto Cycle/Stirling Cycle Hybrid-Engine-Based Power Generation System, Barry Cullen, Jim Mcgovern, Michel Feidt, Stoian Petrescu

Conference Papers

This paper presents preliminary data and results for a system mathematical model for a proposed Otto Cycle / Stirling Cycle hybrid-engine-based power generation system. The system is a combined cycle system with the Stirling cycle machine operating as a bottoming cycle on the Otto cycle exhaust. The application considered is that of a stationary power generation scenario wherein the Stirling cycle engine operates as a waste heat recovery device on the exhaust stream of the Otto cycle engine. This paper is primarily concerned with the development of a model for a suitable Stirling cycle engine capable of running on the …

Development Of A Theoretical Decoupled Stirling Cycle Engine, Barry Cullen, Jim Mcgovern

Conference Papers

The Stirling cycle engine is gaining increasing attention in the current energy market as a clean, quiet and versatile prime mover for use in such situations as solar thermal generation, micro cogeneration and other micro distributed generation situations. A theoretical Stirling cycle engine model is developed. Using a theoretical decoupled engine configuration in which working space swept volume, volume variation, phase angle and dead space ratio are controlled via a black-box electronic controller, a model is developed that is to be used as a tool for analysis of the ideal Stirling cycle engine and the limits on its real world …

The Very Basics Of Sustainability - An Alternative Viewpoint, Jim Mcgovern

Other resources

This paper examines the context and meaning of the term ‘sustainability’, the factors that determine and govern climate on Earth, the population of the Earth and its trends and influencers, the requirements for sustaining life and the options that are available to humankind. Some viewpoints are presented that are alternative to ‘conventional alternative’ thinking. The author advocates keeping an open mind on all available options, including the use of oil, gas, coal, tar sands, carbon capture and sequestration, nuclear power etc., as well as the technologies that are more widely considered ‘green’ and also argues that humankind needs to face …

The Very Basics Of Sustainability - An Alternative Viewpoint (Slides With Audio) (Large File! To Speed Up Download, Right-Click On "Download" Link To Save To Own Pc.), Jim Mcgovern

Other resources

This presentation sets out the very basics of ‘sustainability’, although a definition of sustainability is not attempted. Some of the very basics are the context in which the Earth and humankind exist in space and time, the Earth’s climate, the Earth’s population and humankind’s options and choices. The author advocates keeping an open mind on all available options, including the use of oil, gas, coal, tar sands, carbon capture and sequestration, nuclear power etc., as well as the technologies that are more widely considered ‘green’. The author also argues that, in addressing the challenges that humankind faces, globally concerted effort …

Economic And Environmental Performance Analysis Of Pv Systems For Domestic Applications In Ireland, Lacour Ayompe, Aidan Duffy, Sarah Mccormack, Michael Conlon

Conference Papers

Long-term monthly average daily solar radiation values on horizontal surfaces at 20 locations in Ireland were used to model the performance of a 1.72 kWp grid-connected PV system. Global solar radiation on horizontal surfaces varied between 865.1 and 1,127.9 kWh/m2/yr with a mean of 947.9 kWh/m2/yr. Annual energy yields varied between 869 and 1,156 960 kWh/kWp with a mean of 960 kWh/kWp. The capacity factor for the PV system varied between 9.9 and 13.2% while the mean was 11.0%. System cost parameters, long-term annual average electricity domestic rate cost escalation were used to calculate the Net Present Value (NPV), cost …

Therapeutic Ultrasound Angioplasty: The Risk Of Arterial Perforation. An In Vitro Study, Mark Wylie, Garrett Mcguinness, Graham Gavin

Conference Papers

The use of therapeutic ultrasound delivered via small diameter wire waveguides may represent an emerging minimally invasive approach in the treatment of chronic total occlusions (CTOs), calcified and fibrous plaques. The distal-tip mechanical vibrations (typically 0-210 μm peak-to-peak) have been reported to debulk rigid calcified and fibrous tissues while healthy elastic arterial tissue remains largely unaffected. The risk of arterial (healthy tissue) perforation with energized waveguides is not fully understood. An ultrasonic apparatus capable of delivering a range of wire waveguide distal-tip displacements, up to 80 μm peak-to-peak (p-p), at an operational frequency of 22.5 KHz (+/- 6%) has been …

Heat Transfer Correlations For Low Approach Evaporative Cooling Systems In Buildings, Ben Costelloe, Donal Finn

Articles

The experimental performance of an open industrial scale cooling tower, utilising small approach temperature differences (1–3 K), for rejection of heat at the low water temperatures (11–20 °C) typical of chilled ceilings and other sensible air–water heat dissipation systems in buildings, is examined. The study was carried out under temperate maritime climatic conditions (3–18 °C wet-bulb temperature range). Initially a theoretical analysis of the process at typical conditions for this climate was conducted, which indicated that a water to air (L/G) mass flow rate ratio of less than 1.0 was required for effective operation. Consequently for these low L/G ratios, …

Ultrasonic Angioplasty: Assessing The Risk Of Arterial Perforation, Mark Wylie, Garrett Mcguinness, Graham Gavin

Conference Papers

Atherosclerosis is a cardiovascular disease that effects large and medium muscular arteries (such as coronary and iliac) and also large elastic arteries (such as aorta) [1]. It causes thickening of the arterial wall and over time can result in a completely blocked artery or chronic total occlusion (CTO). While the majority of atherosclerotic lesions can be attempted by typical Percutaneous Transluminal Coronary Angioplasty (PTCA) such as balloon and stent implantation, calcified CTOs are often problematic as they do not lend themselves to be accessed by the guidewire which is required to implant the balloon and stent. Excessive guidewire pushing force …

Monte-Carlo Ray-Trace Modelling Of Quantum Dot Solar Concentrators, Manus Kennedy

Doctoral

Due to the finite resources of fossil fuel and nuclear reserves, renewable energy technologies much provide an increasing proportion of future energy needs, if the world’s population are to expect a secure and sustainable developed society. Quantum dot solar concentrators (QDSCs) can potentially reduce the cost of photovoltaic (PV) electrical power generation and thereby further the growth in installed PV capacity. QDSCs can concentrate both the direct and diffuse components of solar radiation which makes them particularly suitable for climates where the diffuse component is predominant. A QDSC model has been developed based on Monte-Carlo ray-trace techniques. The model allows …

Renewable Energy Resources And Technologies Applicable To Ireland, Fergal O'Rourke, Fergal Boyle, Anthony Reynolds

Articles

The energy consumed in Ireland is primarily achieved by the combustion of fossil fuels. Ireland’s only indigenous fossil fuel is peat; all other fossil fuels are imported. As well as fossil fuels continually becoming more expensive, their use as an energy source also has a negative impact on the environment. Ireland’s energy consumption can be separated into 3 divisions; transportation, electricity generation and heat energy. Ireland however has a vast range of high quality renewable energy resources. Ireland has set a target of 33% of its electricity will be generated from renewable sources by 2020[1]. The use of biomass, wind …

Providing Academic Leadership Through The Role Of Senior Lecturer 1 (Teaching) Using The Theme Of 'Sustainable Energy' As An Example, Jim Mcgovern

Articles

An academic leader should lead in their particular area and should love what they are doing. An example of leadership in the area of 'sustainable energy use' is presented that involves leading through identifying and participating in the development of emerging technologies. Excellent academic leadership can be provided by a Senior Lecturer through active research, incorporating the latest developments in student-centred learning in their work and providing example and encouragement for colleagues and learners.

Simulation Of A Tubular Solid Oxide Fuel Cell Stack Operating On Biomass Syn-Gas Using Aspen Plus, Wayne Doherty, Anthony Reynolds, David Kennedy

Articles

A tubular solid oxide fuel cell (SOFC) stack is modelled and its operation on biomass syn-gas is investigated. The objective of this work is to develop a computer simulation model of a biomass gasification-SOFC (BG-SOFC) system capable of predicting performance under various operating conditions and using diverse fuels. The stack is modelled using Aspen Plus and considers ohmic, activation and concentration losses. It is validated against published data for operation on natural gas. Operating parameters such as fuel and air utilisation factor (U_f and U_a), current density (j) and steam to carbon ratio ( …

Converging Flow Between Coaxial Cones, O. Hall, A. D. Gilbert, C. P. Hills

Articles

Fluid flow governed by the Navier-Stokes equation is considered in a domain bounded by two cones with the same axis. In the first, 'non-parallel' case, the two cones have the same apex and different angles θ = α and β in spherical polar coordinates (r, θ, φ). In the second, 'parallel' case, the two cones have the same opening angle α, parallel walls separated by a gap h and apices separated by a distance h/sinα. Flows are driven by a source Q at the origin, the apex of the lower cone in the parallel case. The Stokes solution for the …

Nonaxisymmetric Stokes Flow Between Concentric Cones, O. Hall, C. P. Hills, A. D. Gilbert

Articles

We study the fully three-dimensional Stokes flow within a geometry consisting of two infinite cones with coincident apices. The Stokes approximation is valid near the apex and we consider the dominant flow features as it is approached. The cones are assumed to be stationary and the flow to be driven by an arbitrary far-field disturbance. We express the flow quantities in terms of eigenfunction expansions and allow for the first time for nonaxisymmetric flow regimes through an azimuthal wave number. The eigenvalue problem is solved numerically for successive wave numbers. Both real and complex sequences of eigenvalues are found, their …

Analysis And Evaluation Of The Dynamic Performance Of Sma Actuators For Prosthetic Hand Design, Kevin O'Toole, Mark Mcgrath, Eugene Coyle

Articles

It is widely acknowledged within the biomedical engineering community that shape memory alloys (SMAs) exhibit great potential for application in the actuation of upper limb prosthesis designs. These lightweight actuators are particularly suitable for prosthetic hand solutions. A four-fingered, 12 degree-of-freedom prosthetic hand has been developed featuring SMA bundle actuators embedded within the palmar structure. Joule heating of the SMA bundle actuators generates sufficient torque at the fingers to allow a wide range of everyday tasks to be carried out. Transient characterization of SMA bundles has shown that performance/response during heating and cooling differs substantially. Natural convection is insufficient to …

The Effect Of Air Preheating In A Biomass Cfb Gasifier Using Aspen Plus Simulation, Wayne Doherty, Anthony Reynolds, David Kennedy

Articles

In the context of climate change, increasing efficiency and energy security, biomass gasification is likely to play an important role in energy production. Atmospheric circulating fluidised bed (CFB) technology was selected for the current study. The primary objective of this research is to develop a computer simulation model of a CFB biomass gasifier that can accurately predict gasifier performance under various operating conditions. An original model was developed using ASPEN Plus (Advanced System for Process ENgineering Plus). The model is based on Gibbs free energy minimisation. The restricted equilibrium method was used to calibrate the model against experimental data. This …

Modelling And Simulation Of A Biomass Gasification-Solid Oxide Fuel Cell Combined Heat And Power Plant Using Aspen Plus, Wayne Doherty, Anthony Reynolds, David Kennedy

Conference Papers

In this paper the operation and performance of a high temperature solid oxide fuel cell (SOFC) stack on biomass syn-gas from a demonstration biomass gasification combined heat and power (CHP) plant is investigated. The objective of this work is to develop a computer simulation model of a biomass-SOFC CHP system, flexible enough for use in industry, capable of predicting system performance under various operating conditions and using diverse fuels. The biomass gasifier is of the dual fluidised bed (DFB) type with steam as the gasifying agent and is operated at atmospheric pressure. The tubular SOFC configuration, developed by Siemens Power …

Analysis Of Wear Models For Advanced Coated Materials, Simon Montgomery, David Kennedy, Noel O'Dowd

Conference Papers

Tribological tests, mathematical modelling and simulations have been conducted over the last few decades to investigate the nature and effects of mechanical wear in coated and uncoated materials. Mathematical models have been developed and in unison with specifically designed empirical tests, the veracity/capability of these models has been investigated. In more recent cases advanced engineering analysis tools, such as FEA and DOE, are used to further compliment and refine experimental techniques.

Studies have focused on the various wear mechanisms: abrasion, adhesion, erosion, corrosion wear, fatigue wear and also on different combinations of these. The intrinsic importance of the material in …

Alternative Sources Of Energy, David Kennedy

Conference Papers

Ireland relies on imports of fossil fuels for up to 83% of its energy needs and this statistic is relatively common in other European countries. Apart from the high import costs and pollutions associated with fossil fuels and the need to meet new targets in terms of CO2 emissions, energy security is essential. This paper provides an overview and outline of the different alternative energy sources available for use either at domestic or on large scale production, some of which are established and others less likely to succeed in our climate.
Some of the alternative energy sources such as wind …