Mechanical Engineering Commons^™

Homogeneous Dbd In N2: 1) Lif, Talif And Electrical Measurements, N. Gherardi, Et. Es-Sebbar, C. Sarra-Bourret, N. Naudé, F. Massines

Dr. Et-touhami Es-sebbar

In this paper we compare two different discharges that can be obtained in a DBD configuration, that is to say the filamentary discharge (usual regime in atmospheric DBD) with the Atmospheric Pressure Townsend Discharge (APTD), which is a homogeneous regime obtained in nitrogen atmosphere. The aim is to help in the understanding of the processes which control the transition from one regime to the other. To do so, the discharge is characterized through electrical measurements, coupled with optical diagnostics among which Laser Induced Fluorescence (LIF) for radical density measurements. The influence of the addition of small quantities of additives on …

Real-World Industry Collaboration Within A Mechatronics Class, Vidya Nandikolla, Susan Shadle, Patricia Pyke, John Gardner, Robert Grover, Suhas Pharkute

Electrical and Computer Engineering Faculty Publications and Presentations

This paper describes the implementation and assessment of an innovative senior/graduate level mechatronics (robotics) module that integrated structured and unstructured learning experiences, in collaboration with an industry partner. With real-world constraints and expectations, students designed and delivered a product as the final project. In fall 2007, the corporate partner provided state-of-the-art, programmable robotic kits with a user-friendly programming environment. The assigned project was to design a biomedical robot to work in a hospital intensive care unit (ICU) to perform tasks such as transporting supplies or delivering paperwork. Students with diverse skills and majors were grouped in ten teams, two to …

Active Species Generation Of Homogeneous Dbd In N2: Experiment And Modelling, N. Gherardi, Et. Es-Sebbar, C. Sarra-Bourret, N. Naudé, F. Massines, D. Tzyganov, P. Ségur, S. Pancheshnyi

Dr. Et-touhami Es-sebbar

No abstract provided.

Product Focused Freeform Fabrication Education, Frank W. Liou, Ming-Chuan Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Presented in this paper is our experience of teaching freeform fabrication to students at the Missouri University of Science and Technology, and to high school students and teachers. The emphasis of the curriculum is exposing students to rapid product development technologies with the goal of creating awareness to emerging career opportunities in CAD/CAM. Starting from solid modeling, principles of freeform fabrication, to applications of rapid prototyping and manufacturing in industry sponsored product development projects, students can learn in-depth freeform fabrication technologies. Interactive course content with hands-on experience for product development is the key towards the success of the program.

Surface Ion-Electron Recombination As The Main Source Of Atoms In Flowing N2 Dbd, D. Tsyganov, Et. Es-Sebbar, S. Pancheshnyi, N. Gherardi, P. Ségur, F. Massines

Dr. Et-touhami Es-sebbar

No abstract provided.

Talif Quantification Of Nitrogen Atoms Applied To Experimental Simulation Of Titan’S Atmosphere, Et. Es-Sebbar, Y. Benilan, E. Arzoumanian, M.-C. Gazeau

Dr. Et-touhami Es-sebbar

No abstract provided.

S.E.T.U.P., A New Program Of Representative Simulations Of Titan’S Atmosphere: Current Status, M-C. Gazeau, E. Arzoumanian, Y. Benilan, Et. Es-Sebbar, A. Jolly, S. Perrier, C. Romanzin

Dr. Et-touhami Es-sebbar

No abstract provided.

The Party’S Over: Sustaining Support Programs When The Funding Is Done, John Gardner, Pat Pyke, Cheryl Schrader, Janet M. Callahan, Amy Moll

Mechanical and Biomedical Engineering Faculty Publications and Presentations

In the lifecycle of an engineering education grant, the phase where best practices are sustained and disseminated is perhaps the most crucial stage for maximizing impact. Yet this transition phase often receives the least attention as project team enthusiasm can wane, while funding tapers off, and faculty priorities are pulled in other directions. There are numerous obstacles associated with sustaining program changes, even those perceived as very valuable. Typical challenges are: What happens when the funding runs out? What grant-developed programs should be sustained by the university? Does the institution need to internally allocate resources in an annual budget large …

Comparison Of Townsend Dielectric Barrier Discharge In N2, N2/O2 And N2/N2o: Behavior And Density Of Radicals, F. Massines, Et. Es-Sebbar, N. Gherardi, N. Naudé, D. Tsyganov, P. Ségur, S. Pancheshnyi

Dr. Et-touhami Es-sebbar

No abstract provided.

Writing Research Proposal: Literature Review And Database Search, Mamoudou H. Dicko Prof.

Pr. Mamoudou H. DICKO, PhD

College Of Engineering Senior Design Competition Spring 2008, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

Benefits Of Leed Designs In Arkansas K-12 Schools, Philip Thrift

Mechanical Engineering Undergraduate Honors Theses

This paper provides and evaluation of an existing LEED certified sustainable green building for energy-efficiency, environmental impact, economic value, and occupant health. The new Bethel Middle School located in Bryant, Arkansas was the first LEED (Leadership in Energy and Environmental Design) certified public school building in the state. Based on actual building specifications and validated with the first year's utility bills, a simulation model was used to evaluate various design aspects of the school building. The building's baseline energy usage was compared with numerous energy and environmental scenarios. Results include both environmental and economic assessments. Overall, the study found that …

Tractor Inventory, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Digital Media Agco Challenger, Nebraska Tractor Test Lab

Nebraska Tractor Tests

Images and videos of the 2008 Agco Challenger Tractor Testing.

Laboratory Experiments As Support To The Built Up Of Titan’S Theoretical Models And Interpretation Of Cassini-Huygens Data, M-C. Gazeau, Y Benilan, Et. Es-Sebbar, T. Ferradaz, E. Hébrard, A. Jolly, F. Raulin, C. Romanzin, J-C. Guillemin, C. Berteloite, A. Canosa, S. D. Le Picard, Ian R. Sims

Dr. Et-touhami Es-sebbar

No abstract provided.

Preparation And Accreditation Of Level 7 Engineering Programmes, Mark Mcgrath

Conference Papers

Accreditation of 3^rd level educational programmes by a suitably recognised professional body is of particular relevance in relation to engineering. The completion of a sequence of modules which leads to the attainment of this professionally recognised award is viewed as integral to the undertaking. The engineering technology fields are developing and expanding rapidly and the third level sector must keep abreast of these changes. This is essential if the third level institutions wish to continue delivering programmes which produce graduates who can successfully complete the transition from 3rd. Level to the various engineering sectors.

This paper outlines various aspects …

Nebraska Summary: S658 Challenger Mt665c Scr, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S653 Agco Dt225b, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S682 New Holland T6020 Elite As, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S718 Case-Ih Farmall 95c, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S765 New Holland Td5030, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S684 New Holland T6050 Elite As, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S607 Challenger Mt575b, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Tractor Museum Podcast: Father Of Test Law Explains It, Nebraska Tractor Test Lab

Nebraska Tractor Tests

Nebraska State Representative Wilmot F. Crozier of Osceola, Nebraska, who fathered and pushed the tractor bill through the Nebraska State Legislature. On September 19th, 1919, he tells why he formulated the law and his story to Implement & Trade Journal.

Nebraska Summary: S646 Challenger Mt545b, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S645 Challenger Mt535b, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S643 Massey Ferguson 7480, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S642 Massey Ferguson 7475, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S623a Case-Ih Magnum 210, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S622a Case-Ih Magnum 190, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …