Mechanical Engineering Commons^™

Detailed Modeling Of The Flash Hydrolysis Of Algae For Biofuel-Production In Comsol Multiphysics, Noah Joseph Legrand

Mechanical & Aerospace Engineering Theses & Dissertations

Algae-derived biofuels are being commercialized as an important renewable energy source. Like any new technology, conversion improvements are desired, including reductions in process complexity and better utilization of the entire microalgae feedstock. The Old Dominion Biomass Laboratory has focused on flash hydrolysis for algae biofuel production. That process involves rapidly heating algae and water mixed as a slurry to a subcritical state. Results from small-scale bench tests are promising, but process scale up is a challenge. Currently there exists a pilot laboratory scale system utilizing induction heating in order to reach controlled reaction temperatures with a reaction duration of 10 …

Development Of Heterogeneous Catalysts For Upgrading Biomass Pyrolysis Bio-Oils Into Advanced Biofuels, Shouyun Cheng

Electronic Theses and Dissertations

The massive consumption of fossil fuels and associated environmental issues result in an increased interest in alternative resources such as biofuels. The renewable biofuels can be upgraded from bio-oils that are derived from biomass pyrolysis. Catalytic cracking and hydrodeoxygenation (HDO) are two most promising bio-oil upgrading techniques for biofuel production. Heterogeneous catalysts are essential for upgrading bio-oil into hydrocarbon biofuel. Although some progresses have been made, the cost and effectiveness of catalysts still remain challenges. The main objective of this study was to develop efficient heterogeneous catalysts for upgrading bio-oils into advanced hydrocarbon biofuel with low costs. In catalytic cracking, …

Impact Of Heavy Metal Contamination From Coal Flue Gas On Microalgae Biofuel And Biogas Production Through Multiple Conversion Pathways, Derek E. Hess

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Microalgae has a great potential to help alleviate the world's current dependence on fossil fuels. Microalgae is a single celled organism that produces lipids as a food storage device much like humans and animals store fat. These lipids are a kind of oil that when harvested can be utilized as biofuel.

As the technology surrounding using microalgae as a source of biofuel has advanced key bottlenecks in the eventual large-scale production of microalgae based biofuel have been discovered. One of these bottlenecks is the need to cheaply supply carbon for microalgae growth. One idea that has emerged as a plausible …

Techno-Economic Feasibility And Life Cycle Assessment Of Dairy Effluent To Biofuel Via Hydrothermal Liquefaction, Hailey M. Summers

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Delactosed whey permeate (delac) is a low valued by-product in the dairy industry with 90 million tons annually disposed of worldwide. Upgrading delac to bioproducts, specifically biofuel, has been demonstrated at laboratory scale through yeast fermentation. However, the large-scale environmental impact and economic feasibility of this process is yet to be quantified. Further research, focused on evaluating the sustainability, scalability and economic feasibility of the fermentation pathway, directs research and development to move the technology towards commercialization. The enclosed research incorporates biological experimentation with engineering systems modeling to evaluate the large-scale environmental impacts and economic feasibility of generating bioproducts from …

Combustion Kinetics Of Advanced Biofuels, Ghazal Barari

Electronic Theses and Dissertations

Use of biofuels, especially in automotive applications, is a growing trend due to their potential to lower greenhouse gas emissions from combustion. Ketones are a class of biofuel candidates which are produced from cellulose. However, ketones received rather scarce attention from the combustion community compared to other classes such as, alcohols, esters, and ethers. There is little knowledge on their combustion performance and pollutant generation. Hence their combustion chemistry needs to be investigated in detail. Diisopropyl ketone (DIPK) is a promising biofuel candidate, which is produced using endophytic fungal conversion. A detailed understanding of the combustion kinetics of the oxidation …

Global Evaluation Of Biofuel Potential From Microalgae, Jeffrey W. Moody

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The objective of the proposed work is to determine the productivity potential of microalgae around the world based on the current large uncertainty of the productivity
potential found in literature. To achieve this objective, a validated thermal and biological growth model was utilized coupled with weather data files from weather stations around the world. This enabled a realistic assessment of the productivity potential based on actual climatic variables. Sensitivity of microalgae lipid productivity to biomass production, temperature, and variability was performed illustrating the importance of biological and temporal resolution. Results from modeling work were leveraged for a scalability assessment based …

Nutrient And Carbon-Dioxide Requirements For Large-Scale Microalgae Biofuel Production, Benjamin K. Shurtz

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Ever-increasing fuel prices and a limited supply of oil worldwide are threatening our economy and way of life in both the near and distant future. In order to reduce oil
dependence, the US Department of Energy (DOE) has established a goal that by the year 2030, 30% of the US transportation fuel will be renewable. The goal equates to
approximately 60 billion gallons per year of renewable fuel.

In an effort to reach the DOE renewable fuel goal, numerous types of plants are being studied, whose oil can be harvested and refined to serve as replacement fuel.
Among the various …

Vaporization Characteristics Of Pure And Blended Biofuel Droplet Injected Into Hot Stream Of Air, Abhishek Saha

Electronic Theses and Dissertations

The combustion dynamics and stability are dependent on the quality of mixing and vaporization of the liquid fuel in the pre-mixer. The vaporization characteristics of different blends of biofuel droplets injected into the air stream in the pre-mixer are modeled in this current study. The focus of this work is on the blended alternate fuels which are lately being considered for commercial use. Two major alternate fuels analyzed are ethanol and Rapeseed Methyl Esters (RME). Ethanol is being used as a substitute for gasoline, while RME is an alternative for diesel. In the current work, the vaporization characteristics of a …

Temperature Influence And Heat Management Requirements Of Microalgae Cultivation In Photobioreactors, Thomas Hagen Mehlitz

Master's Theses

Microalgae are considered one of the most promising feedstocks for biofuel production for the future. The most efficient way to produce vast amounts of algal biomass is the use of closed tubular photobioreactors (PBR). The heat requirement for a given system is a major concern since the best algae growth rates are obtained between 25-30 °C, depending on the specific strain. A procedure to determine temperature influence on algal growth rates was developed for a lab-scale PBR system using the species Chlorella. A maximum growth rate of 1.44 doublings per day at 29 °C (optimal temperature) was determined. In addition, …