Mechanical Engineering Commons^™

Selective Resistive Sintering: A Novel Additive Manufacturing Process, Austin Bryan Van Horn

Graduate Theses and Dissertations

Selective laser sintering (SLS) is one of the most popular 3D printing methods that uses a laser to pattern energy and selectively sinter powder particles to build 3D geometries. However, this printing method is plagued by slow printing speeds, high power consumption, difficulty to scale, and high overhead expense. In this research, a new 3D printing method is proposed to overcome these limitations of SLS. Instead of using a laser to pattern energy, this new method, termed selective resistive sintering (SRS), uses an array of microheaters to pattern heat for selectively sintering materials. Using microheaters offers significant power savings, significantly …

Revolutionized Additive Manufacturing, Matthew Walker, Winthrop Townsend, Luca Fuller

Mechanical Engineering

No abstract provided.

Non-Destructive Evaluation Of Functional Material Properties Performed On Additively Manufactured Coupons, Devin S. Plagge

Mechanical Engineering ETDs

This thesis presents the development of non-destructive characterization of functional material properties of additively manufactured metals. In particular, this study was focused on the common structural stainless steel alloy, 316L, utilizing a coupon designed specifically for simple modal analysis. Additive manufacturing (AM) has moved to the forefront of the manufacturing world, particularly in aerospace and defense segments because of the potential to produce multi-functional, highly optimized components. The ability to confidently qualify these complex, and thus expensive, components has been lagging behind the advancing technology. The adoption of traditional characterization techniques developed for wrought materials has been most common, and …

A Haptic Surface Robot Interface For Large-Format Touchscreen Displays, Mark Price

Masters Theses

This thesis presents the design for a novel haptic interface for large-format touchscreens. Techniques such as electrovibration, ultrasonic vibration, and external braked devices have been developed by other researchers to deliver haptic feedback to touchscreen users. However, these methods do not address the need for spatial constraints that only restrict user motion in the direction of the constraint. This technology gap contributes to the lack of haptic technology available for touchscreen-based upper-limb rehabilitation, despite the prevalent use of haptics in other forms of robotic rehabilitation. The goal of this thesis is to display kinesthetic haptic constraints to the touchscreen user …

Fiber Length Attrition In Additive Manufacturing, Michael Chapiro

Materials Engineering

Chopped carbon fibers are used as reinforcements in thermoplastics, but the viscous shear forces that arise in melt-processing reduces the fiber length well below its critical length resulting in only moderate strength and stiffness gains compared to the neat resin. This research project aimed to experimentally determine the effect of the melt–flow portion of a single-screw- extrusion process on carbon fiber length attrition in isolation from the immediately preceding screw–plastication step that is responsible for most of the heat needed for melting. Carbon fibers with an initial length of 2 mm were stirred into 5,000 centipoise and 10,000 centipoise silicone …

Metals Am Design For Manufacturing, Maren Cosens, Ben Wong, Kevin Hale

Mechanical Engineering

We are looking to improve upon the current post processing techniques for metal additive manufacturing (AM). This project, sponsored by Lawrence Livermore National Laboratory (LLNL), will investigate ways to improve the design of stainless steel 316 parts made by AM, and how these designs will help with post processing techniques. We hope that the findings regarding stainless steel will apply to to improve the AM and post processing handshake in general. In particular, the project will focus on including different features in different basic part design shapes to aid in fixturing and post-processing of the part made by AM. This …

Metals Additive Manufacturing Powder Aging Characterization, Thomas Russell Lovejoy, Nicholas Karl Muetterties, David Takeo Otsu

Mechanical Engineering

The metallic additive manufacturing process known as selective laser melting requires highly spherical, normally distributed powder with diameters in the range of 10 to 50 microns. Previous observations have shown a degradation in powder quality over time, resulting in unwanted characteristics in the final printed parts. 21-6-9 stainless steel powder was used to fabricate test parts, with leftover powder recycled back into the machine. Powder samples and test specimens were characterized to observe changes across build cycles. Few changes were observed in the physical and mechanical properties of the specimens, however, there were indications of chemical changes across cycles. Potential …

Measuring Accuracy Of Two 3d Printing Materials, Mudassir Ali

Master of Technology Management Plan II Graduate Projects

Part accuracy is one of the important aspect in the manufacturing industry. The overall inaccuracy of the parts being built by RP technology has been one of the major challenges that need to be overcome. Though all the printing materials come with specifications, but the suppliers and manufactures does not specify the accuracy of the materials. In this study we established a study which compares the accuracy of the materials in consideration and performed an experiment to establish the superiority of a material in terms of accuracy over each other. The purpose of this project was to compare the dimensional …

The Effect Of Laser Power And Scan Speed On Melt Pool Characteristics Of Pure Titanium And Ti-6al-4v Alloy For Selective Laser Melting, Chandrakanth Kusuma

Browse all Theses and Dissertations

Selective Laser Melting (SLM) is an additive manufacturing (AM) technique that creates complex parts by selectively melting metal powder layer-by-layer. In SLM, the process parameters decide the quality of the fabricated component. In this study, single beads of commercially pure titanium (CP-Ti) and Ti-6Al-4V alloy are melted on a substrate of the same material as powder using an in-house built SLM machine. Multiple combinations of laser power and scan speed are used for single bead fabrication while the laser beam diameter and powder layer thickness are kept constant. This experimental study investigates the influence of laser power, scan speed and …

Creating Multi-Functional G-Code For Multi-Process Additive Manufacturing, Efrain Aguilera Jr

Open Access Theses & Dissertations

Additive manufacturing (AM) started over thirty years ago and with it a manufacturing revolution that moves industrial production into the personal home. With recent interest shifting into multi-functional parts fabricated through AM technologies, unified systems are being developed. Merging different manufacturing technologies into one single machine is a challenge but undergoing research has shown promise in the development of multi-functional systems. Concurrent work is being done in the software, automation, and hardware aspect of multi-functional systems. An effort to use industry compatible Computer Aided Design (CAD) software to design multi-functional parts including circuits, micro-machining, and foil embedding then exporting and …

Characterization Of Performance Of A 3d Printed Stirling Engine Through Analysis And Test, Julie Vodhanel

ETD Archive

This thesis involves the fusion of two technologies, Stirling engines and additive
manufacturing. The project began by building a Stirling engine primarily out of 3D printed parts. Methods to measure the power output were designed and built with a combination of 3D printed and off the shelf parts. The Stirling engine was tested to see if there was a correlation to analysis results, and a regenerator was installed to determine the effect on performance for this relatively low temperature engine. Finally, variations in test operation and the use of heat sinks were used to find a combination that will allow …

Modeling And Characterization Of Piezoelectric Based Multifunctional Structures, Ricardo Martinez Hernandez

Open Access Theses & Dissertations

Continuous monitoring of high pressure and high temperature in energy system applications has been a developing research area in today’s energy sector. Multifunctional materials have the potential to provide real-time monitoring of structures where temperature and pressure sensing is critical to its performance and efficiency. In this study, multifunctional materials are studied by embedding piezoelectric materials with two ongoing technologies, woven fabric composites and additive manufacturing (AM). The AM technology allows the flexibility of embedding a sensor within the structure, all while not compromising the mechanical performance requirements. The “smart parts” are fabricated modifying the standard additive manufacturing process, using …

Development Of The Thermal Wire Embedding Technology For Electronic And Mechanical Applications On Fdm-Printed Parts, Daniel Abraham Marquez

Open Access Theses & Dissertations

Additive Manufacturing (AM) has increased in popularity and attracted much attention from many fields such as automotive, aviation, aerospace, and even the fashion industry. Since the early 2000s, Fused Deposition Modeling (FDM) technologies have been the most popular in the AM world ("Wohlers Talk" Popularity of FDM). These technologies have been mainly used for building parts for prototype and structural type of applications such as a fixture for components or a housing for mechanisms.

With the current state of the FDM technologies, the functionality of the parts that are printed are limited to the applications listed before or simply just …

An Adapted Approach To Process Mapping Across Alloy Systems And Additive Manufacturing Processes, Luke Charles Sheridan

Browse all Theses and Dissertations

The continually growing market for metal components fabricated using additive manufacturing (AM) processes has called for a greater understanding of the effects of process variables on the melt pool geometry and microstructure in manufactured components for various alloy systems. Process Mapping is a general approach that traces the influence of process parameters to thermal behavior and feature development during AM processing. Previous work has focused mainly on Ti-6Al-4V (Ti64), but this work uses novel mathematical derivations and adapted process mapping methodologies to construct new geometric, thermal, and microstructural process maps for Ti64 and two nickel superalloy material systems. This work …

Feasibility Of Attaining Fully Equiaxed Microstructure Through Process Variable Control For Additive Manufacturing Of Ti-6al-4v, Sarah Louise Kuntz

Browse all Theses and Dissertations

One of the greatest challenges in additive manufacturing is fabricating titanium structures with consistent and desirable microstructure. To date, fully columnar deposits have been achieved through direct control of process variables. However, the introduction of external factors appears necessary to achieve fully equiaxed grain morphology using existing commercial processes. This work introduces and employs an analytic model to relate process variables to solidification thermal conditions and expected beta grain morphology at the surface of and at the deepest point in the melt pool. The latter is required in order to ensure the deposited microstructure is maintained even after the deposition …

Effect Of Build Parameters On Mechanical Properties Of Ultem 9085 Parts By Fused Deposition Modeling, Krishna Prasanth Motaparti

Masters Theses

"Additive manufacturing is a fabrication technique that is used to build components by depositing material in a layer-by-layer manner. Fused Deposition Modeling (FDM) is one of the additive manufacturing techniques which is widely used for prototyping and production applications of thermoplastic components. In load bearing applications, the flexural and compression forces often coexist. In order to avoid failure under these loads, it is essential to study the mechanical properties of the components fabricated by FDM. The main focus of this research is to study the mechanical properties of the fabricated components and to comprehend their dependence on various build parameters. …